From: Bruno Randolf Date: Tue, 25 Jan 2011 04:15:38 +0000 (+0900) Subject: ath5k: Enable 802.11j 4.9GHz frequencies X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ead3dcff31111c3dc1205a383190614f045d94aa;p=openwrt%2Fstaging%2Fblogic.git ath5k: Enable 802.11j 4.9GHz frequencies This enables 4.9GHz frequencies in ath5k if they are allowed as indicated by the regulatory domain code. Currently this is MKK9_MKKC (0xfe). Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c index 39baee17d0da..f77e8a703c5c 100644 --- a/drivers/net/wireless/ath/ath5k/caps.c +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -57,9 +57,8 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) * XXX current ieee80211 implementation because the IEEE * XXX channel mapping does not support negative channel * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. + * XXX doesn't matter because these channels are out of the + * XXX legal range. */ /* @@ -67,8 +66,10 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) */ if (AR5K_EEPROM_HDR_11A(ee_header)) { - /* 4920 */ - caps->cap_range.range_5ghz_min = 5005; + if (ath_is_49ghz_allowed(caps->cap_eeprom.ee_regdomain)) + caps->cap_range.range_5ghz_min = 4920; + else + caps->cap_range.range_5ghz_min = 5005; caps->cap_range.range_5ghz_max = 6100; /* Set supported modes */