From: Felix Fietkau Date: Tue, 10 Jun 2014 09:05:25 +0000 (+0000) Subject: atheros: avoid CamelCase X-Git-Tag: reboot~6990 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ea9360a5c645b44bdeea50d90e7946097d61a813;p=openwrt%2Fstaging%2Fchunkeey.git atheros: avoid CamelCase Change fooBar variables names to foo_bar as suggested by checkpatch, write few tables names in lower case and correctly place __initdata keyword. Signed-off-by: Sergey Ryazanov SVN-Revision: 41080 --- diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch index 96be80d044..4524f944c9 100644 --- a/target/linux/atheros/patches-3.10/100-board.patch +++ b/target/linux/atheros/patches-3.10/100-board.patch @@ -255,8 +255,8 @@ + config = ar231x_board.config; + if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) { + printk(KERN_INFO "Fixing up empty mac addresses\n"); -+ config->resetConfigGpio = 0xffff; -+ config->sysLedGpio = 0xffff; ++ config->reset_config_gpio = 0xffff; ++ config->sys_led_gpio = 0xffff; + random_ether_addr(config->wlan0_mac); + config->wlan0_mac[0] &= ~0x06; + random_ether_addr(config->enet0_mac); @@ -402,7 +402,7 @@ + u16 cksum; /* checksum (starting with BD_REV 2) */ + u16 rev; /* revision of this struct */ +#define BD_REV 4 -+ char boardName[64]; /* Name of board */ ++ char board_name[64]; /* Name of board */ + u16 major; /* Board major number */ + u16 minor; /* Board minor number */ + u32 flags; /* Board configuration */ @@ -416,7 +416,7 @@ +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */ +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ @@ -424,19 +424,19 @@ +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ -+ u16 resetConfigGpio; /* Reset factory GPIO pin */ -+ u16 sysLedGpio; /* System LED GPIO pin */ ++ u16 reset_config_gpio; /* Reset factory GPIO pin */ ++ u16 sys_led_gpio; /* System LED GPIO pin */ + -+ u32 cpuFreq; /* CPU core frequency in Hz */ -+ u32 sysFreq; /* System frequency in Hz */ -+ u32 cntFreq; /* Calculated C0_COUNT frequency */ ++ u32 cpu_freq; /* CPU core frequency in Hz */ ++ u32 sys_freq; /* System frequency in Hz */ ++ u32 cnt_freq; /* Calculated C0_COUNT frequency */ + + u8 wlan0_mac[6]; + u8 enet0_mac[6]; + u8 enet1_mac[6]; + -+ u16 pciId; /* Pseudo PCIID for common code */ -+ u16 memCap; /* cap bank1 in MB */ ++ u16 pci_id; /* Pseudo PCIID for common code */ ++ u16 mem_cap; /* cap bank1 in MB */ + + /* version 3 */ + u8 wlan1_mac[6]; /* (ar5212) */ @@ -1634,12 +1634,12 @@ +static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) +{ + u32 proc1 = ar231x_read_reg(AR531X_PROC1); -+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */ ++ u32 proc_addr = ar231x_read_reg(AR531X_PROCADDR); /* clears error */ + u32 dma1 = ar231x_read_reg(AR531X_DMA1); -+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */ ++ u32 dma_addr = ar231x_read_reg(AR531X_DMAADDR); /* clears error */ + + printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", -+ procAddr, proc1, dmaAddr, dma1); ++ proc_addr, proc1, dma_addr, dma1); + + machine_restart("AHB error"); /* Catastrophic failure */ + return IRQ_HANDLED; @@ -1895,7 +1895,7 @@ + platform_device_register(&ar5312_physmap_flash); + +#ifdef CONFIG_LEDS_GPIO -+ ar5312_leds[0].gpio = config->sysLedGpio; ++ ar5312_leds[0].gpio = config->sys_led_gpio; + platform_device_register(&ar5312_gpio_leds); +#endif + @@ -1969,7 +1969,7 @@ + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ -+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 }; ++static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; + + +static int __init @@ -1978,7 +1978,7 @@ + unsigned int result; + unsigned int predivide_mask, predivide_shift; + unsigned int multiplier_mask, multiplier_shift; -+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; ++ unsigned int clock_ctl1, predivide_select, predivisor, multiplier; + unsigned int doubler_mask; + u16 devid; + @@ -2006,30 +2006,30 @@ + /* + * Clocking is derived from a fixed 40MHz input clock. + * -+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) -+ * sysFreq = cpuFreq / 4 (used for APB clock, serial, ++ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) ++ * sys_freq = cpu_freq / 4 (used for APB clock, serial, + * flash, Timer, Watchdog Timer) + * -+ * cntFreq = cpuFreq / 2 (use for CPU count/compare) ++ * cnt_freq = cpu_freq / 2 (use for CPU count/compare) + * + * So, for example, with a PLL multiplier of 5, we have + * -+ * cpuFreq = 200MHz -+ * sysFreq = 50MHz -+ * cntFreq = 100MHz ++ * cpu_freq = 200MHz ++ * sys_freq = 50MHz ++ * cnt_freq = 100MHz + * + * We compute the CPU frequency, based on PLL settings. + */ + -+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1); -+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; -+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; -+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; ++ clock_ctl1 = ar231x_read_reg(AR5312_CLOCKCTL1); ++ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; ++ predivisor = clockctl1_predivide_table[predivide_select]; ++ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; + -+ if (clockCtl1 & doubler_mask) { ++ if (clock_ctl1 & doubler_mask) { + multiplier = multiplier << 1; + } -+ return (40000000 / preDivisor) * multiplier; ++ return (40000000 / predivisor) * multiplier; +} + +static inline int @@ -2106,7 +2106,7 @@ + --- /dev/null +++ b/arch/mips/ar231x/ar2315.c -@@ -0,0 +1,692 @@ +@@ -0,0 +1,693 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -2604,10 +2604,10 @@ + for(i = 1; i < 8; i++) + { + if((i == AR2315_RESET_GPIO) || -+ (i == ar231x_board.config->resetConfigGpio)) ++ (i == ar231x_board.config->reset_config_gpio)) + continue; + -+ if(i == ar231x_board.config->sysLedGpio) ++ if (i == ar231x_board.config->sys_led_gpio) + strcpy(led_names[led], "wlan"); + else + sprintf(led_names[led], "gpio%d", i); @@ -2673,42 +2673,43 @@ + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ -+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 }; -+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 }; ++static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; ++static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 }; + +static unsigned int __init -+ar2315_sys_clk(unsigned int clockCtl) ++ar2315_sys_clk(unsigned int clock_ctl) +{ -+ unsigned int pllcCtrl,cpuDiv; -+ unsigned int pllcOut,refdiv,fdiv,divby2; -+ unsigned int clkDiv; -+ -+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL); -+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; -+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; -+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; -+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; -+ divby2 += 1; -+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; ++ unsigned int pllc_ctrl, cpu_div; ++ unsigned int pllc_out, refdiv, fdiv, divby2; ++ unsigned int clk_div; + ++ pllc_ctrl = ar231x_read_reg(AR2315_PLLC_CTL); ++ refdiv = (pllc_ctrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; ++ refdiv = clockctl1_predivide_table[refdiv]; ++ fdiv = (pllc_ctrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; ++ divby2 = (pllc_ctrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; ++ divby2 += 1; ++ pllc_out = (40000000/refdiv)*(2*divby2)*fdiv; + + /* clkm input selected */ -+ switch(clockCtl & CPUCLK_CLK_SEL_M) { ++ switch (clock_ctl & CPUCLK_CLK_SEL_M) { + case 0: + case 1: -+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; ++ clk_div = pllc_divide_table[(pllc_ctrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; + break; + case 2: -+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; ++ clk_div = pllc_divide_table[(pllc_ctrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; + break; + default: -+ pllcOut = 40000000; -+ clkDiv = 1; ++ pllc_out = 40000000; ++ clk_div = 1; + break; + } -+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; -+ cpuDiv = cpuDiv * 2 ?: 1; -+ return (pllcOut/(clkDiv * cpuDiv)); ++ ++ cpu_div = (clock_ctl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ cpu_div = cpu_div * 2 ?: 1; ++ ++ return pllc_out / (clk_div * cpu_div); +} + +static inline unsigned int diff --git a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch index e8879f41db..4f712ac9cd 100644 --- a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch +++ b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch @@ -562,11 +562,11 @@ +static void ar231x_check_link(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); -+ u16 phyData; ++ u16 phy_data; + -+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); -+ if (sp->phyData != phyData) { -+ if (phyData & BMSR_LSTATUS) { ++ phy_data = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); ++ if (sp->phy_data != phy_data) { ++ if (phy_data & BMSR_LSTATUS) { + /* link is present, ready link partner ability to deterine + duplexity */ + int duplex = 0; @@ -601,7 +601,7 @@ + /* no link */ + sp->link = 0; + } -+ sp->phyData = phyData; ++ sp->phy_data = phy_data; + } +} + @@ -1586,7 +1586,7 @@ + unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ + unsigned short mac; + unsigned short link; /* 0 - link down, 1 - link up */ -+ u16 phyData; ++ u16 phy_data; + + struct tasklet_struct rx_tasklet; + int unloading; diff --git a/target/linux/atheros/patches-3.10/210-reset_button.patch b/target/linux/atheros/patches-3.10/210-reset_button.patch index c1471903c4..8007ed4ddb 100644 --- a/target/linux/atheros/patches-3.10/210-reset_button.patch +++ b/target/linux/atheros/patches-3.10/210-reset_button.patch @@ -29,7 +29,7 @@ + struct gpio_keys_button *p; + int err; + -+ if (ar231x_board.config->resetConfigGpio == 0xffff) ++ if (ar231x_board.config->reset_config_gpio == 0xffff) + return -ENODEV; + + p = kzalloc(sizeof(*p), GFP_KERNEL); @@ -40,7 +40,7 @@ + p->type = EV_KEY; + p->code = KEY_RESTART; + p->debounce_interval = 60; -+ p->gpio = ar231x_board.config->resetConfigGpio; ++ p->gpio = ar231x_board.config->reset_config_gpio; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = 20;