From: INAGAKI Hiroshi Date: Sat, 30 Mar 2024 06:33:58 +0000 (+0900) Subject: ramips: add support for Buffalo WSR-2533DHPLS X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ea8d140b25f2f197c49896a31b20a4af89b94c9d;p=openwrt%2Fstaging%2Fwigyori.git ramips: add support for Buffalo WSR-2533DHPLS Buffalo WSR-2533DHPLS is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Very similar to Buffalo WSR-2533DHPL, but with NAND, different GPIO and TRX partitions. Specification: - SoC : MediaTek MT7621AT - RAM : DDR3 256 MiB (Samsung K4B2G1646F-BYMA) - Flash : RAW-NAND 128 MiB (Winbond W29N01HV or KIOXIA TC58BVG0S3HTAI0) - WLAN : 2.4/5 GHz (2x MediaTek MT7615N) - Ethernet : 10/100/1000 Mbps - Switch : MediaTek MT7530 (SoC) 4 ports - LED/keys : 8x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB (J4) - arrangement : 3.3V, GND, TX, RX from triangle-mark - settings : 115200n8 - Power : 12VDC 1.5A Flash instruction using factory.bin image: 1. boot WSR-2533DHPLS normally with "Router" mode 2. access to the WebI ("http://192.168.11.1/") on the device and open firmware update page ("管理" -> "ファームウェア更新") 3. select the OpenWrt factory.bin image and click update ("更新実行") button Attention: do not use "factory-uboot.bin" image 4. Wait ~120 seconds to complete flashing Flash instruction using initramfs image: 1. prepare the TFTP server with the initramfs image renamed to "linux.trx-recovery" and IP address "192.168.11.2" 2. press the "AOSS" button while powering on the WSR-2533DHPLS 3. after 10 seconds, release the "AOSS" button, WSR-2533DHPLS downloads the initramfs image and boot with it automatically 4. on the initramfs image, download the factory-uboot.bin image to the device and perform sysupgrade with it and "-F" option 5. wait ~120 seconds to complete flashing Notes: - The embedded addresses in eeprom data in Factory partition have Buffalo's OUI, but they don't match with the actual addresses assigned to wlan devices. So fixup addresses by the user-space script. root@localhost:/# hexdump -C /dev/mtdblock3 | grep "^0000[08]000\s" 00000000 15 76 a0 00 88 57 ee bc 01 a8 15 76 c3 14 00 80 |.v...W.....v....| 00008000 15 76 a0 00 88 57 ee bc 01 f8 15 76 c3 14 00 80 |.v...W.....v....| See "MAC addresses" below for actual addresses. - There are 2x factory*.bin images for different purposes. - factory.bin : for flashing on OEM WebUI - factory-uboot.bin: for flashing on OEM bootloader or initramfs image factory-uboot.bin is useful for recoverying the device, or refreshing when the kernel partition is expanded in the future. sysupgrade on this device accepts factory-uboot.bin with option "-F", but on that situation, user configurations won't be kept, so it's not for normal use. MAC addresses: LAN : 90:96:F3:xx:xx:30 (board_data, "mac" (text)) WAN : 90:96:F3:xx:xx:30 (board_data, "mac" (text)) 2.4 GHz: 90:96:F3:xx:xx:31 5 GHz : 90:96:F3:xx:xx:38 [original work] Signed-off-by: Audun-Marius Gangstø [convert to ubi, fix/improve DT, add sysupgrade support] Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpls.dts b/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpls.dts new file mode 100644 index 0000000000..9ed94cf7b2 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpls.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_buffalo_wsr-2533dhplx.dtsi" + +/ { + compatible = "buffalo,wsr-2533dhpls", "mediatek,mt7621-soc"; + model = "Buffalo WSR-2533DHPLS"; + + chosen { + bootargs = "console=ttyS0,115200n8 ubi.block=0,rootfs root=/dev/ubiblock0_0"; + }; +}; + +&nand { + status = "okay"; + + mediatek,nmbm; + /* + * - u-boot - (kernel (6MiB, in "firmware")) + * - Kernel2 - WTB + */ + mediatek,bmt-remap-range = <0x0 0x780000>, + <0x1980000 0x5b00000>; +}; + +&partitions { + partition@100000 { + label = "factory"; + reg = <0x100000 0x80000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x4da8>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + }; + }; + + partition@180000 { + compatible = "brcm,trx"; + brcm,trx-magic = <0x534c4844>; + label = "firmware"; + reg = <0x180000 0x1800000>; + }; + + partition@1980000 { + label = "Kernel2"; + reg = <0x1980000 0x1800000>; + }; + + partition@3180000 { + label = "glbcfg"; + reg = <0x3180000 0x200000>; + read-only; + }; + + partition@3380000 { + label = "board_data"; + reg = <0x3380000 0x200000>; + read-only; + }; + + partition@3580000 { + label = "debug_log"; + reg = <0x3580000 0x900000>; + read-only; + }; + + partition@3e80000 { + label = "WTB"; + reg = <0x3e80000 0x3600000>; + read-only; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhplx.dtsi b/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhplx.dtsi new file mode 100644 index 0000000000..33d23d4675 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhplx.dtsi @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + color = ; + function = "router"; + }; + + led-1 { + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_WLAN; + }; + + led-2 { + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_WAN_ONLINE; + }; + + led-3 { + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_WAN_ONLINE; + }; + + led_power_green: led-4 { + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_POWER; + }; + + led_power_amber: led-5 { + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_POWER; + }; + + led-6 { + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_WLAN; + }; + + led-7 { + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + color = ; + function = "router"; + }; + }; + + keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-aoss { + label = "aoss"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + switch-router { + label = "router"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&gmac1 { + status = "okay"; + label = "wan"; + phy-handle = <ðphy0>; +}; + +ðphy0 { + /delete-property/ interrupts; +}; + +&switch0 { + ports { + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan3"; + }; + }; +}; + +&nand { + status = "okay"; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <0x01>; + + partition@0 { + label = "u-boot"; + reg = <0x00 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x80000>; + read-only; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&pcie1 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart2", "uart3"; + function = "gpio"; + }; +}; + +&xhci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0643cd29f4..904fd11b1a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -7,7 +7,13 @@ include ./common-tp-link.mk DEFAULT_SOC := mt7621 -DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID +DEVICE_VARS += BUFFALO_TRX_MAGIC ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID + +define Image/Prepare + # For UBI we want only one extra block + rm -f $(KDIR)/ubi_mark + echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark +endef define Build/append-dlink-covr-metadata echo -ne '{"supported_devices": "$(1)", "firmware": "' > $@metadata.tmp @@ -533,6 +539,38 @@ define Device/buffalo_wsr-2533dhpl endef TARGET_DEVICES += buffalo_wsr-2533dhpl +define Device/buffalo_wsr-2533dhplx + $(Device/dsa-migration) + DEVICE_VENDOR := Buffalo + DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools + BUFFALO_TAG_PLATFORM := MTK + BUFFALO_TAG_VERSION := 9.99 + BUFFALO_TAG_MINOR := 9.99 + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + KERNEL_SIZE := 6144k + IMAGES += factory.bin factory-uboot.bin + IMAGE/factory.bin = append-ubi | \ + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark |\ + buffalo-enc $$(DEVICE_MODEL) 9.99 -l | \ + buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | \ + buffalo-dhp-image + IMAGE/factory-uboot.bin := append-ubi | \ + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | append-metadata + IMAGE/sysupgrade.bin := \ + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \ + sysupgrade-tar kernel=$$$$@ | append-metadata +endef + +define Device/buffalo_wsr-2533dhpls + $(Device/buffalo_wsr-2533dhplx) + DEVICE_MODEL := WSR-2533DHPLS + BUFFALO_TRX_MAGIC := 0x534c4844 + IMAGE_SIZE := 24576k +endef +TARGET_DEVICES += buffalo_wsr-2533dhpls + define Device/buffalo_wsr-600dhp $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index ea479ddd38..71a342f8f4 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ ramips_setup_interfaces() alfa-network,ax1800rm|\ ampedwireless,ally-r1900k|\ asus,rt-ax53u|\ + buffalo,wsr-2533dhpls|\ gehua,ghl-r-001|\ h3c,tx1800-plus|\ h3c,tx1801-plus|\ @@ -215,7 +216,8 @@ ramips_setup_macs() label_mac=$(macaddr_add "$wan_mac" 3) lan_mac=$label_mac ;; - buffalo,wsr-1166dhp) + buffalo,wsr-1166dhp|\ + buffalo,wsr-2533dhpls) wan_mac=$(mtd_get_mac_ascii board_data "mac") lan_mac=$wan_mac label_mac=$wan_mac diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 0ec46bb0ea..9350d67466 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -27,6 +27,13 @@ case "$board" in hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28) [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress ;; + buffalo,wsr-2533dhpls) + lan_mac_addr=$(mtd_get_mac_ascii board_data "mac") + [ "$PHYNBR" = "0" ] && \ + macaddr_add $lan_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && \ + macaddr_add $lan_mac_addr 8 > /sys${DEVPATH}/macaddress + ;; comfast,cf-e390ax) [ "$PHYNBR" = "0" ] && echo -n "$(mtd_get_mac_binary factory 0x0004)" > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && echo -n "$(mtd_get_mac_binary factory 0x8004)" > /sys${DEVPATH}/macaddress diff --git a/target/linux/ramips/mt7621/base-files/etc/uci-defaults/09_fix_crc b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/09_fix_crc new file mode 100644 index 0000000000..89889bc1c2 --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/09_fix_crc @@ -0,0 +1,19 @@ +. /lib/functions.sh + +# don't modify FW data when booting with initramfs image +fstype="$(/bin/mount | awk '($3 ~ /^\/$/) && ($5 !~ /rootfs/) { print $5 }')" +[ "$fstype" = "tmpfs" ] && \ + exit 0 + +fixup_trx_crc() { + local trx_magic="$1" + local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"\(kernel\|linux\)".*/\1/p' /proc/mtd) + + mtd -M $trx_magic ${kernel_size:+-c 0x$kernel_size} fixtrx firmware +} + +case "$(board_name)" in +buffalo,wsr-2533dhpls) + fixup_trx_crc 0x44484C53 + ;; +esac diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/buffalo.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/buffalo.sh new file mode 100644 index 0000000000..8040d4c768 --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/buffalo.sh @@ -0,0 +1,109 @@ +# The mtd partitions "firmware" and "Kernel2" on NAND flash are os-image +# partitions. These partitions are called as "Image1/Image2" in U-Boot +# on WSR-2533DHPLx devices, and they are checked conditions when booting. +# "Image1" is always used for booting. +# +# == U-Boot Behaviors == +# +# - "Image1"/"Image2" images are good, images are different or +# "Image2" image is broken +# -> copy os-image to "Image2" from "Image1" +# +# - "Image1" image is broken +# -> copy os-image to "Image1" from "Image2" +# +# - "Image1"/"Image2" images are broken +# -> fall to U-Boot command line + +# TRX magic numbers of each model +case "$(board_name)" in +buffalo,wsr-2533dhpls) + BUFFALO_TRX_MAGIC="44484c53" # "DHLS" + ;; +esac + +buffalo_check_image() { + local board="$1" + local boardname="$(echo $board | tr ',' '_')" + local magic="$2" + local fw_image="$3" + + # return error state if TRX + UBI formatted image specified + # to notify about configurations + if [ "$magic" = "$BUFFALO_TRX_MAGIC" ]; then + echo "Your configurations won't be saved if factory-uboot.bin image specified." + echo "But if you want to upgrade, please execute sysupgrade with \"-F\" option." + return 1 + fi + + # check if valid tar file specifed + if ! tar tf "$fw_image" &>/dev/null; then + echo "Specified file is not a tar archive: $fw_image" + return 1 + fi + + local control_len=$( (tar xf $fw_image sysupgrade-$boardname/CONTROL -O | wc -c) 2> /dev/null) + + # check if valid sysupgrade tar archive + if [ "$control_len" = "0" ]; then + echo "Invalid sysupgrade file: $fw_image" + return 1 + fi + + local kern_part_len=$(grep "\"linux\"" /proc/mtd | sed "s/mtd[0-9]*:[ \t]*\([^ \t]*\).*/\1/") + [ -z "$kern_part_len" ] && { + echo "Unable to get \"linux\" partition size" + return 1 + } + kern_part_len=$((0x$kern_part_len)) + + # this also checks if the sysupgrade image is for correct models + local kern_bin_len=$( (tar xf $fw_image sysupgrade-${boardname}/kernel -O | wc -c) 2> /dev/null) + if [ -z "$kern_bin_len" ]; then + echo "Failed to get new kernel size, is valid sysupgrade image specified for the device?" + return 1 + fi + + # kernel binary has a trx header (len: 28 (0x1c)) + kern_bin_len=$((kern_bin_len - 28)) + + if [ "$kern_bin_len" != "$kern_part_len" ]; then + echo -n "The length of new kernel is invalid for current " + echo "\"linux\" partition, please use factory-uboot.bin image." + echo "\"linux\" partition: $kern_part_len, new kernel: $kern_bin_len" + return 1 + fi +} + +# for TRX + UBI formatted image +buffalo_upgrade_ubinized() { + sync + echo 3 > /proc/sys/vm/drop_caches + + local mtdnum="$( find_mtd_index "ubi" )" + # if no "ubi", don't return error for the purpose of recovery + # ex: recovery after accidental erasing "firmware" partition + if [ ! "$mtdnum" ]; then + echo "cannot find ubi mtd partition \"ubi\", skip detachment" + else + ubidetach -m "$mtdnum" + fi + + # erase all data in "firmware" + mtd erase "${PART_NAME}" + # write TRX + UBI formatted image to "firmware" + get_image "$1" | mtd $MTD_ARGS write - "${PART_NAME:-firmware}" + if [ $? -ne 0 ]; then + echo "Failed to write the specified image." + exit 1 + fi +} + +buffalo_do_upgrade() { + if [ "$(get_magic_long "$1")" = "$BUFFALO_TRX_MAGIC" ]; then + buffalo_upgrade_ubinized "$1" + else + CI_KERNPART="firmware" + nand_do_upgrade "$1" + fi +} diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 46ca89e991..82eda0bf2f 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -9,6 +9,17 @@ RAMFS_COPY_BIN='fw_printenv fw_setenv' RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' platform_check_image() { + local board=$(board_name) + local magic="$(get_magic_long "$1")" + + [ "$#" -gt 1 ] && return 1 + + case "$board" in + buffalo,wsr-2533dhpls) + buffalo_check_image "$board" "$magic" "$1" || return 1 + ;; + esac + return 0 } @@ -132,6 +143,9 @@ platform_do_upgrade() { zyxel,nwa55axe) nand_do_upgrade "$1" ;; + buffalo,wsr-2533dhpls) + buffalo_do_upgrade "$1" + ;; elecom,wrc-x1800gs) [ "$(fw_printenv -n bootmenu_delay)" != "0" ] || \ fw_setenv bootmenu_delay 3