From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Sat, 19 Oct 2013 21:08:03 +0000 (-0300)
Subject: [media] exynos4-is: Leave FIMC clocks enabled when runtime PM is disabled
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ea3f1a3db379788806a7b18f4cb5ede16c11bb80;p=openwrt%2Fstaging%2Fblogic.git

[media] exynos4-is: Leave FIMC clocks enabled when runtime PM is disabled

Driver should ensure a device can be also used normally when runtime
PM is disabled. So enable the FIMC clock in probe() in such situation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---

diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index f7915695c907..a7dfd07e8389 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -998,36 +998,39 @@ static int fimc_probe(struct platform_device *pdev)
 
 	ret = devm_request_irq(dev, res->start, fimc_irq_handler,
 			       0, dev_name(dev), fimc);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(dev, "failed to install irq (%d)\n", ret);
-		goto err_clk;
+		goto err_sclk;
 	}
 
 	ret = fimc_initialize_capture_subdev(fimc);
-	if (ret)
-		goto err_clk;
+	if (ret < 0)
+		goto err_sclk;
 
 	platform_set_drvdata(pdev, fimc);
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto err_sd;
+
+	if (!pm_runtime_enabled(dev)) {
+		ret = clk_enable(fimc->clock[CLK_GATE]);
+		if (ret < 0)
+			goto err_sd;
+	}
+
 	/* Initialize contiguous memory allocator */
 	fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(fimc->alloc_ctx)) {
 		ret = PTR_ERR(fimc->alloc_ctx);
-		goto err_pm;
+		goto err_gclk;
 	}
 
 	dev_dbg(dev, "FIMC.%d registered successfully\n", fimc->id);
-
-	pm_runtime_put(dev);
 	return 0;
-err_pm:
-	pm_runtime_put(dev);
+
+err_gclk:
+	clk_disable(fimc->clock[CLK_GATE]);
 err_sd:
 	fimc_unregister_capture_subdev(fimc);
-err_clk:
+err_sclk:
 	clk_disable(fimc->clock[CLK_BUS]);
 	fimc_clk_put(fimc);
 	return ret;