From: Matthias Schiffer Date: Sat, 25 Mar 2017 12:43:29 +0000 (+0100) Subject: iw: enable MESH ID in scan output X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ea1855949b97e679f3be1e644741a07562cfce03;p=openwrt%2Fstaging%2Fmans0n.git iw: enable MESH ID in scan output Make scan output useful for 802.11s meshes. The common print_ssid function is used, so this doesn't add any additional code. Based-on-patch-by: Jan-Tarek Butt Signed-off-by: Matthias Schiffer --- diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index 98836783df..3f92982a4a 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -155,7 +155,7 @@ printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3); printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]); printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2); -@@ -1380,6 +1381,13 @@ static void print_ie(const struct ie_pri +@@ -1380,6 +1381,14 @@ static void print_ie(const struct ie_pri static const struct ie_print ieprinters[] = { [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, @@ -163,13 +163,14 @@ + [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, + [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), }, + [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), }, ++ [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, + [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), }, + [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), }, +#if 0 [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), }, [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), }, -@@ -1389,14 +1397,8 @@ static const struct ie_print ieprinters[ +@@ -1389,21 +1398,15 @@ static const struct ie_print ieprinters[ [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), }, [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), }, [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), }, @@ -183,8 +184,8 @@ - [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), }, - [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, -@@ -1404,6 +1406,7 @@ static const struct ie_print ieprinters[ +- [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, + [127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), }, [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), }, [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), }, [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },