From: Daniel Golle Date: Sat, 6 Mar 2021 19:04:15 +0000 (+0000) Subject: ipq806x: work-around borked QCA SDK bootloader X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e991c1b8a2385397fc1e657ed73878938997d951;p=openwrt%2Fstaging%2Fmans0n.git ipq806x: work-around borked QCA SDK bootloader The bootloader of many ipq806x boards seems to require the config node of the FIT image to be 'config@1' (or a secific different value). This requirement used to be implicitely satisfied because OpenWrt used to also call the configuration node inside a FIT image 'config@1'. However, as recent U-Boot now prohibits the use of the '@' symbol as part of node names, this was changed by commit 5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes") Explicitely restore the default name of the configuration node to 'config@1' on ipq806x. (ipq807x is unaffected as DEVICE_DTS_CONFIG default is set "config@hk01" in target/linux/ipq807x/image/Makefile) Reported-by: Chen Minqiang Signed-off-by: Daniel Golle --- diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index cb4058f4a1..6c091be335 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -28,6 +28,7 @@ define Device/Default KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) KERNEL_LOADADDR = 0x42208000 DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) + DEVICE_DTS_CONFIG := config@1 IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata IMAGE/sysupgrade.bin/squashfs :=