From: Chukun Pan Date: Fri, 20 Sep 2024 15:10:26 +0000 (+0800) Subject: mediatek: filogic: reorder alphabetically X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e98987048ad73012cb29993c39c2de8682d64f9b;p=openwrt%2Fstaging%2Fpepe2k.git mediatek: filogic: reorder alphabetically Reorder scripts to keep alphabetical order. Signed-off-by: Chukun Pan --- diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 1437a120f5..dad5c293de 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -105,16 +105,16 @@ smartrg,sdg-8733a) ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:08:orange:wan" "wan" "link_100 link_1000" ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:08:white:wan" "wan" "link_10000" ;; -wavlink,wl-wn586x3) - ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" - ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" - ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx" - ;; tplink,re6000xd) ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx" ucidef_set_led_netdev "eth1" "lan-3" "blue:lan-2" "eth1" "link tx rx" ;; +wavlink,wl-wn586x3) + ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" + ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" + ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx" + ;; xiaomi,mi-router-wr30u-stock|\ xiaomi,mi-router-wr30u-ubootmod) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx" @@ -132,7 +132,7 @@ zyxel,ex5601-t0-ubootmod) ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx" ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx" ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx" - ;; + ;; esac board_config_flush diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 40d1b504e3..af5c4ceafe 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -8,9 +8,6 @@ mediatek_setup_interfaces() local board="$1" case $board in - acelink,ew-7886cax) - ucidef_set_interface_lan "eth0" "dhcp" - ;; abt,asr3000|\ cmcc,rax3000m|\ h3c,magic-nx30-pro|\ @@ -18,6 +15,9 @@ mediatek_setup_interfaces() zbtlink,zbt-z8103ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 ;; + acelink,ew-7886cax) + ucidef_set_interface_lan "eth0" "dhcp" + ;; acer,predator-w6) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 ;; @@ -36,10 +36,16 @@ mediatek_setup_interfaces() netcore,n60|\ ruijie,rg-x60-pro|\ unielec,u7981-01*|\ - zbtlink,zbt-z8102ax) + zbtlink,zbt-z8102ax|\ + zyxel,ex5601-t0-stock|\ + zyxel,ex5601-t0-ubootmod) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; - asus,tuf-ax6000) + asus,tuf-ax6000|\ + glinet,gl-mt6000|\ + tplink,tl-xdr4288|\ + tplink,tl-xdr6088|\ + tplink,tl-xtr8488) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1 ;; bananapi,bpi-r3) @@ -56,6 +62,13 @@ mediatek_setup_interfaces() comfast,cf-e393ax) ucidef_set_interfaces_lan_wan "lan1" eth1 ;; + cudy,ap3000outdoor-v1|\ + cudy,re3000-v1|\ + netgear,wax220|\ + ubnt,unifi-6-plus|\ + zyxel,nwa50ax-pro) + ucidef_set_interface_lan "eth0" + ;; cudy,m3000-v1|\ cudy,tr3000-v1|\ glinet,gl-mt2500|\ @@ -69,12 +82,6 @@ mediatek_setup_interfaces() dlink,aquila-pro-ai-m30-a1) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" internet ;; - glinet,gl-mt6000|\ - tplink,tl-xdr4288|\ - tplink,tl-xdr6088|\ - tplink,tl-xtr8488) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1 - ;; mediatek,mt7986a-rfb) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan6" "eth1 wan" ;; @@ -87,13 +94,6 @@ mediatek_setup_interfaces() mercusys,mr90x-v1) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1 ;; - cudy,ap3000outdoor-v1|\ - cudy,re3000-v1|\ - netgear,wax220|\ - ubnt,unifi-6-plus|\ - zyxel,nwa50ax-pro) - ucidef_set_interface_lan "eth0" - ;; smartrg,sdg-8622|\ smartrg,sdg-8632|\ smartrg,sdg-8733a|\ @@ -115,10 +115,6 @@ mediatek_setup_interfaces() xiaomi,redmi-router-ax6000-ubootmod) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" wan ;; - zyxel,ex5601-t0-stock|\ - zyxel,ex5601-t0-ubootmod) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 - ;; *) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan ;; diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 429728392a..edc0456566 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -131,13 +131,6 @@ platform_do_upgrade() { EMMC_ROOT_DEV="$(cmdline_get_var root)" emmc_do_upgrade "$1" ;; - xiaomi,mi-router-ax3000t|\ - xiaomi,mi-router-wr30u-stock|\ - xiaomi,redmi-router-ax6000-stock) - CI_KERN_UBIPART=ubi_kernel - CI_ROOT_UBIPART=ubi - nand_do_upgrade "$1" - ;; unielec,u7981-01*) local rootdev="$(cmdline_get_var root)" rootdev="${rootdev##*/}" @@ -155,6 +148,13 @@ platform_do_upgrade() { ;; esac ;; + xiaomi,mi-router-ax3000t|\ + xiaomi,mi-router-wr30u-stock|\ + xiaomi,redmi-router-ax6000-stock) + CI_KERN_UBIPART=ubi_kernel + CI_ROOT_UBIPART=ubi + nand_do_upgrade "$1" + ;; *) nand_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 3e10003e4c..83f1336444 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -83,6 +83,10 @@ define Build/append-gl-metadata } endef +define Build/append-openwrt-one-eeprom + dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@ +endef + define Build/zyxel-nwa-fit-filogic $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \ $@.its $@ "80 e1 ff ff ff ff ff ff ff ff" @@ -1047,10 +1051,6 @@ define Device/openembed_som7981 endef TARGET_DEVICES += openembed_som7981 -define Build/append-openwrt-one-eeprom - dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@ -endef - define Device/openwrt_one DEVICE_VENDOR := OpenWrt DEVICE_MODEL := One @@ -1404,7 +1404,6 @@ define Device/yuncore_ax835 endef TARGET_DEVICES += yuncore_ax835 - define Device/zbtlink_zbt-z8102ax DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-Z8102AX