From: John Crispin Date: Thu, 17 Dec 2015 09:26:28 +0000 (+0000) Subject: ramips: mt7621: add patch to setup CM memory region for palmbus X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e8890c6be0f2987625644bb731c496da2a483113;p=openwrt%2Fstaging%2Fnbd.git ramips: mt7621: add patch to setup CM memory region for palmbus This is tested and works on ubnt-erx. Signed-off-by: Nikolay Martynov SVN-Revision: 47903 --- diff --git a/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch b/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch new file mode 100644 index 0000000000..ba462bf92e --- /dev/null +++ b/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch @@ -0,0 +1,36 @@ +--- a/arch/mips/include/asm/mach-ralink/mt7621.h ++++ b/arch/mips/include/asm/mach-ralink/mt7621.h +@@ -13,6 +13,9 @@ + #ifndef _MT7621_REGS_H_ + #define _MT7621_REGS_H_ + ++#define MT7621_PALMBUS_BASE 0x1C000000 ++#define MT7621_PALMBUS_SIZE 0x03FFFFFF ++ + #define MT7621_SYSC_BASE 0x1E000000 + + #define SYSC_REG_CHIP_NAME0 0x00 +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -204,6 +204,21 @@ void prom_soc_init(struct ralink_soc_inf + mips_cm_probe(); + mips_cpc_probe(); + ++ if (mips_cm_numiocu()) { ++ /* mips_cm_probe() wipes out bootloader ++ config for CM regions and we have to configure them ++ again. This SoC cannot talk to pamlbus devices ++ witout proper iocu region set up. ++ ++ FIXME: it would be better to do this with values ++ from DT, but we need this very early because ++ without this we cannot talk to pretty much anything ++ including serial. ++ */ ++ write_gcr_reg0_base(MT7621_PALMBUS_BASE); ++ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | CM_GCR_REGn_MASK_CMTGT_IOCU0); ++ } ++ + if (!register_cps_smp_ops()) + return; + if (!register_cmp_smp_ops())