From: Markos Chandras Date: Thu, 9 Jul 2015 09:40:52 +0000 (+0100) Subject: MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e87569cd6c57cfe8c3fbbd20a5cf5cefb8b14156;p=openwrt%2Fstaging%2Fblogic.git MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6 R6 has dropped the MMUExtDef field from the config4 register and it now returns 0. However, the return value means nothing in that case and the only supported configuration for R6 is the VTLB+FTLB (MMUextDef == 3). As a result, rework the code so that the correct value is set for R6 cores. Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10651/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6da5f2db6792..62dae429fe70 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -546,7 +546,16 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c) if (cpu_has_tlb) { if (((config4 & MIPS_CONF4_IE) >> 29) == 2) c->options |= MIPS_CPU_TLBINV; - mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + /* + * This is a bit ugly. R6 has dropped that field from + * config4 and the only valid configuration is VTLB+FTLB so + * set a good value for mmuextdef for that case. + */ + if (cpu_has_mips_r6) + mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT; + else + mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + switch (mmuextdef) { case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT: c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;