From: Srinivas Kandagatla Date: Mon, 2 Jun 2014 09:09:30 +0000 (+0100) Subject: mmc: mmci: add edge support to data and command out in variant data. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e8740644ab5f906e131596d7580701b2ca855210;p=openwrt%2Fstaging%2Fblogic.git mmc: mmci: add edge support to data and command out in variant data. This patch adds edge support for data and command out to variant structure giving more flexibility to the driver to support more SOCs which have different clock register layout. Without this patch other new SOCs like Qcom will have to add more code to special case them Signed-off-by: Srinivas Kandagatla Reviewed-by: Linus Walleij [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2fb893313044..5228c5de334d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -53,6 +53,7 @@ static unsigned int fmax = 515633; * @clkreg: default value for MCICLOCK register * @clkreg_enable: enable value for MMCICLOCK register * @clkreg_8bit_bus_enable: enable value for 8 bit bus + * @clkreg_neg_edge_enable: enable value for inverted data/cmd output * @datalength_bits: number of bits in the MMCIDATALENGTH register * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY * is asserted (likewise for RX) @@ -74,6 +75,7 @@ struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; unsigned int clkreg_8bit_bus_enable; + unsigned int clkreg_neg_edge_enable; unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; @@ -143,6 +145,7 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, @@ -159,6 +162,7 @@ static struct variant_data variant_ux500v2 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE, .datalength_bits = 24, .sdio = true, @@ -314,7 +318,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) - clk |= MCI_ST_UX500_NEG_EDGE; + clk |= variant->clkreg_neg_edge_enable; mmci_write_clkreg(host, clk); }