From: Adrian Schmutzler Date: Mon, 11 Nov 2019 15:27:50 +0000 (+0100) Subject: mediatek: split base-files into subtargets X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e845c094d5c9d6afbb1ab3f0815d6ed546b9d429;p=openwrt%2Fstaging%2Fsvanheule.git mediatek: split base-files into subtargets This splits some base-files across subtargets, as done previously on ath79 and ramips and also introduced for mt7629 subtarget here already. Most of the existing base-files content is specific to mt7623. While at it, apply the following fixes: - Remove lots of trailing whitespaces - Remove wildcard on unielec,u7623-02-emmc-512m - Remove inconsistent quotation marks in cases Signed-off-by: Adrian Schmutzler Acked-by: John Crispin --- diff --git a/target/linux/mediatek/base-files/etc/board.d/02_network b/target/linux/mediatek/base-files/etc/board.d/02_network deleted file mode 100755 index faa2434241..0000000000 --- a/target/linux/mediatek/base-files/etc/board.d/02_network +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/uci-defaults.sh -. /lib/functions/system.sh - -mediatek_setup_interfaces() -{ - local board="$1" - - case $board in - 'mediatek,mt7623a-rfb-emmc') - ucidef_set_interface_lan "lan0 lan1 lan2 lan3" - ucidef_set_interface_wan eth1 - ;; - 'bananapi,bpi-r2'|\ - "unielec,u7623"*) - ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" - ;; - esac -} - -mediatek_setup_macs() -{ - local board="$1" - - case $board in - "unielec,u7623"*) - mac=$(cat /sys/class/net/wan/address) - ucidef_set_interface_macaddr "wan" $mac - ;; - esac -} - -board_config_update -board=$(board_name) -mediatek_setup_interfaces $board -mediatek_setup_macs $board -board_config_flush - -exit 0 diff --git a/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac b/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac deleted file mode 100644 index 3d04000738..0000000000 --- a/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh -# Copyright (C) 2018 OpenWrt.org - -RECOVERY_PART=/dev/mmcblk0p1 - -preinit_set_mac_address() { - local mac - - . /lib/functions.sh - . /lib/functions/system.sh - - case $(board_name) in - "unielec,u7623"*) - if [ -b $RECOVERY_PART ]; then - insmod nls_cp437 - insmod nls_iso8859-1 - insmod fat - insmod vfat - mkdir -p /tmp/recovery - mount -o rw,noatime $RECOVERY_PART /tmp/recovery - - if [ -f "/tmp/recovery/mac_addr" ]; - then - mac=$(cat /tmp/recovery/mac_addr) - else - mac=$(cat /sys/class/net/eth0/address) - echo "$mac" > /tmp/recovery/mac_addr - fi - - sync - umount /tmp/recovery - rm -rf /tmp/recovery - fi - - ip link set dev wan address $mac 2> /dev/null - - mac=$(macaddr_add $mac 1) - - ip link set dev lan0 address $mac 2>/dev/null - ip link set dev lan1 address $mac 2>/dev/null - ip link set dev lan2 address $mac 2>/dev/null - ip link set dev lan3 address $mac 2>/dev/null - ;; - esac -} - -boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/mediatek/base-files/lib/preinit/79_move_config b/target/linux/mediatek/base-files/lib/preinit/79_move_config deleted file mode 100644 index 617336583e..0000000000 --- a/target/linux/mediatek/base-files/lib/preinit/79_move_config +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh -# Copyright (C) 2015 OpenWrt.org - -. /lib/upgrade/common.sh - -RECOVERY_PART=/dev/mmcblk0p1 - -move_config() { - if [ -b $RECOVERY_PART ]; then - insmod nls_cp437 - insmod nls_iso8859-1 - insmod fat - insmod vfat - mkdir -p /recovery - mount -o rw,noatime $RECOVERY_PART /recovery - [ -f "/recovery/$BACKUP_FILE" ] && mv -f "/recovery/$BACKUP_FILE" / - umount /recovery - fi -} - -boot_hook_add preinit_mount_root move_config diff --git a/target/linux/mediatek/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/base-files/lib/upgrade/platform.sh deleted file mode 100755 index 9c99ee1c18..0000000000 --- a/target/linux/mediatek/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,68 +0,0 @@ -platform_do_upgrade() { - local board=$(board_name) - case "$board" in - "unielec,u7623"*) - #Keep the persisten random mac address (if it exists) - mkdir -p /tmp/recovery - mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery - [ -f "/tmp/recovery/mac_addr" ] && \ - mv -f /tmp/recovery/mac_addr /tmp/ - umount /tmp/recovery - - #1310720 is the offset in bytes from the start of eMMC and to - #the location of the kernel (2560 512 byte sectors) - get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync - - mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery - [ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery - sync - umount /tmp/recovery - ;; - *) - default_do_upgrade "$1" - ;; - esac -} - -PART_NAME=firmware - -platform_check_image() { - local board=$(board_name) - local magic="$(get_magic_long "$1")" - - [ "$#" -gt 1 ] && return 1 - - case "$board" in - bananapi,bpi-r2|\ - "unielec,u7623"*) - [ "$magic" != "27051956" ] && { - echo "Invalid image type." - return 1 - } - return 0 - ;; - - *) - echo "Sysupgrade is not supported on your board yet." - return 1 - ;; - esac - - return 0 -} - -platform_copy_config_emmc() { - mkdir -p /recovery - mount -o rw,noatime /dev/mmcblk0p1 /recovery - cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE" - sync - umount /recovery -} - -platform_copy_config() { - case "$(board_name)" in - "unielec,u7623"*) - platform_copy_config_emmc - ;; - esac -} diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..d719a35dec --- /dev/null +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network @@ -0,0 +1,29 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +mediatek_setup_interfaces() +{ + local board="$1" + + case $board in + esac +} + +mediatek_setup_macs() +{ + local board="$1" + + case $board in + esac +} + +board_config_update +board=$(board_name) +mediatek_setup_interfaces $board +mediatek_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..f2264592a4 --- /dev/null +++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh @@ -0,0 +1,26 @@ +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} + +PART_NAME=firmware + +platform_check_image() { + local board=$(board_name) + + [ "$#" -gt 1 ] && return 1 + + case "$board" in + *) + echo "Sysupgrade is not supported on your board yet." + return 1 + ;; + esac + + return 0 +} diff --git a/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..07fd63fba7 --- /dev/null +++ b/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network @@ -0,0 +1,40 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +mediatek_setup_interfaces() +{ + local board="$1" + + case $board in + mediatek,mt7623a-rfb-emmc) + ucidef_set_interface_lan "lan0 lan1 lan2 lan3" + ucidef_set_interface_wan eth1 + ;; + bananapi,bpi-r2|\ + unielec,u7623-02-emmc-512m) + ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" + ;; + esac +} + +mediatek_setup_macs() +{ + local board="$1" + + case $board in + unielec,u7623-02-emmc-512m) + ucidef_set_interface_macaddr "wan" "$(cat /sys/class/net/wan/address)" + ;; + esac +} + +board_config_update +board=$(board_name) +mediatek_setup_interfaces $board +mediatek_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac b/target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac new file mode 100644 index 0000000000..7a73a2d84d --- /dev/null +++ b/target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac @@ -0,0 +1,47 @@ +#!/bin/sh +# Copyright (C) 2018 OpenWrt.org + +RECOVERY_PART=/dev/mmcblk0p1 + +preinit_set_mac_address() { + local mac + + . /lib/functions.sh + . /lib/functions/system.sh + + case $(board_name) in + unielec,u7623-02-emmc-512m) + if [ -b $RECOVERY_PART ]; then + insmod nls_cp437 + insmod nls_iso8859-1 + insmod fat + insmod vfat + mkdir -p /tmp/recovery + mount -o rw,noatime $RECOVERY_PART /tmp/recovery + + if [ -f "/tmp/recovery/mac_addr" ]; + then + mac=$(cat /tmp/recovery/mac_addr) + else + mac=$(cat /sys/class/net/eth0/address) + echo "$mac" > /tmp/recovery/mac_addr + fi + + sync + umount /tmp/recovery + rm -rf /tmp/recovery + fi + + ip link set dev wan address $mac 2> /dev/null + + mac=$(macaddr_add $mac 1) + + ip link set dev lan0 address $mac 2>/dev/null + ip link set dev lan1 address $mac 2>/dev/null + ip link set dev lan2 address $mac 2>/dev/null + ip link set dev lan3 address $mac 2>/dev/null + ;; + esac +} + +boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config b/target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config new file mode 100644 index 0000000000..617336583e --- /dev/null +++ b/target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config @@ -0,0 +1,21 @@ +#!/bin/sh +# Copyright (C) 2015 OpenWrt.org + +. /lib/upgrade/common.sh + +RECOVERY_PART=/dev/mmcblk0p1 + +move_config() { + if [ -b $RECOVERY_PART ]; then + insmod nls_cp437 + insmod nls_iso8859-1 + insmod fat + insmod vfat + mkdir -p /recovery + mount -o rw,noatime $RECOVERY_PART /recovery + [ -f "/recovery/$BACKUP_FILE" ] && mv -f "/recovery/$BACKUP_FILE" / + umount /recovery + fi +} + +boot_hook_add preinit_mount_root move_config diff --git a/target/linux/mediatek/mt7623/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7623/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..225fec0bca --- /dev/null +++ b/target/linux/mediatek/mt7623/base-files/lib/upgrade/platform.sh @@ -0,0 +1,68 @@ +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + unielec,u7623-02-emmc-512m) + #Keep the persisten random mac address (if it exists) + mkdir -p /tmp/recovery + mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery + [ -f "/tmp/recovery/mac_addr" ] && \ + mv -f /tmp/recovery/mac_addr /tmp/ + umount /tmp/recovery + + #1310720 is the offset in bytes from the start of eMMC and to + #the location of the kernel (2560 512 byte sectors) + get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync + + mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery + [ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery + sync + umount /tmp/recovery + ;; + *) + default_do_upgrade "$1" + ;; + esac +} + +PART_NAME=firmware + +platform_check_image() { + local board=$(board_name) + local magic="$(get_magic_long "$1")" + + [ "$#" -gt 1 ] && return 1 + + case "$board" in + bananapi,bpi-r2|\ + unielec,u7623-02-emmc-512m) + [ "$magic" != "27051956" ] && { + echo "Invalid image type." + return 1 + } + return 0 + ;; + *) + echo "Sysupgrade is not supported on your board yet." + return 1 + ;; + esac + + return 0 +} + +platform_copy_config_emmc() { + mkdir -p /recovery + mount -o rw,noatime /dev/mmcblk0p1 /recovery + cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE" + sync + umount /recovery +} + +platform_copy_config() { + case "$(board_name)" in + unielec,u7623-02-emmc-512m) + platform_copy_config_emmc + ;; + esac +}