From: Dominik Brodowski Date: Thu, 29 Jul 2010 13:50:55 +0000 (+0200) Subject: pcmcia: move Vpp setup to struct pcmcia_device X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e8405f0f617856de0ceb7d04e65b663051451544;p=openwrt%2Fstaging%2Fblogic.git pcmcia: move Vpp setup to struct pcmcia_device Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan (for drivers/bluetooth) Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index e944aa0c5517..12cdc9ff39ad 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -194,9 +194,9 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 7ab8f29d5e0d..2c8d981c110d 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -686,7 +686,7 @@ static int bt3c_check_config(struct pcmcia_device *p_dev, p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { p_dev->resource[0]->start = cf->io.win[0].base; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 1c4f5e863b03..7ea6fa42fdef 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -615,7 +615,7 @@ static int btuart_check_config(struct pcmcia_device *p_dev, p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { p_dev->resource[0]->start = cf->io.win[0].base; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 2a4cb9c18f01..82690e409435 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -221,9 +221,9 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; @@ -311,7 +311,7 @@ static int ide_config(struct pcmcia_device *link) info->host = host; dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", 'a' + host->ports[0]->index * 2, - link->conf.Vpp / 10, link->conf.Vpp % 10); + link->vpp / 10, link->vpp % 10); kfree(stk); return 0; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index a024192b672a..ad07d61dc09b 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -191,9 +191,9 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -257,8 +257,8 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 31ce404baa3c..ab94c8aebddc 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -570,9 +570,9 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; link->conf.Attributes = 0; if(setvpp == 2) { - link->conf.Vpp = dev->vpp; + link->vpp = dev->vpp; } else { - link->conf.Vpp = 0; + link->vpp = 0; } link->conf.IntType = INT_MEMORY; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787c..488e7b45d54b 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -166,9 +166,9 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -244,8 +244,8 @@ static int airo_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c106..479f5084bac1 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -183,9 +183,9 @@ static int atmel_config_check(struct pcmcia_device *p_dev, /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d22..3f35dd4438ca 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -508,9 +508,9 @@ static int prism2_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -605,9 +605,9 @@ static int prism2_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp / 10, + link->vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d88539..f7e3fa6305b4 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -181,10 +181,10 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1b..1bbad101b559 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -243,10 +243,10 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 14b1a951e1b6..817d00adfc89 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -303,6 +303,7 @@ int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) ret = -EIO; goto unlock; } + p_dev->vpp = new_vpp; unlock: mutex_unlock(&s->ops_mutex); @@ -458,7 +459,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Do power control. We don't allow changes in Vcc. */ - s->socket.Vpp = req->Vpp; + s->socket.Vpp = p_dev->vpp; if (s->ops->set_socket(s, &s->socket)) { mutex_unlock(&s->ops_mutex); dev_printk(KERN_WARNING, &p_dev->dev, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index e872e0684273..50574e869418 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1624,10 +1624,10 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; } @@ -1749,8 +1749,8 @@ static int nsp_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "nsp_cs: index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) { - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) { + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); } if (link->conf.Attributes & CONF_ENABLE_IRQ) { printk(", irq %d", link->irq); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 7d475b2a79e8..9597442a0ac1 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -440,7 +440,7 @@ static int simple_config_check(struct pcmcia_device *p_dev, int *try = priv_data; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; p_dev->io_lines = ((*try & 0x1) == 0) ? diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 0e13a00eb2ed..8e8475298baa 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -152,10 +152,10 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1<conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ @@ -201,8 +201,8 @@ static int sl811_cs_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); printk(", io %pR", link->resource[0]); printk("\n"); diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index e13d0cd3f8f7..ccb8e6e0dd6b 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -22,7 +22,6 @@ /* For RequestConfiguration */ typedef struct config_req_t { u_int Attributes; - u_int Vpp; /* both Vpp1 and Vpp2 */ u_int IntType; u_int ConfigBase; u_char Status, Pin, Copy, ExtStatus; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 8e307b93f47b..6137fbc34abd 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -94,6 +94,7 @@ struct pcmcia_device { /* device setup */ unsigned int irq; struct resource *resource[PCMCIA_NUM_RESOURCES]; + unsigned int vpp; unsigned int io_lines; /* number of I/O lines */