From: Russell King Date: Wed, 27 Nov 2019 11:45:15 +0000 (+0000) Subject: kernel: remove obsolete phylink/SFP patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e81a5b055658c599c37a07c3e83a7b08df81dd31;p=openwrt%2Fstaging%2Fjogo.git kernel: remove obsolete phylink/SFP patches Remove the old phylink/SFP patches from the OpenWRT build; these will be updated with a new set in subsequent. 450-reprobe_sfp_phy is also removed for several reasons: 1) it is not in mainline. 2) it breaks copper modules that do not have a PHY. 3) it makes backporting the current patch set harder. Discussion is ongoing with the patch author for a mainline Linux kernel patch for this. Signed-off-by: Russell King --- diff --git a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch deleted file mode 100644 index f2581ca6b7..0000000000 --- a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 0068a89747e7c1d9a0bbb7282a34382a4274638a Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Fri, 14 Apr 2017 16:41:55 +0100 -Subject: [PATCH] sfp: provide netdev sfp_bus and use for start/stop - -Add a netdev sfp_bus pointer for propagating the phylink start/stop -actions to the SFP cage: the SFP cage may not be directly connected to -phylink, but may be the other side of a fixed PHY, and SFP needs to -know when the netdev is brought up or taken down. - -Signed-off-by: Russell King ---- - drivers/net/phy/phylink.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -949,8 +949,8 @@ void phylink_start(struct phylink *pl) - - if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio)) - mod_timer(&pl->link_poll, jiffies + HZ); -- if (pl->sfp_bus) -- sfp_upstream_start(pl->sfp_bus); -+ if (pl->netdev->sfp_bus) -+ sfp_upstream_start(pl->netdev->sfp_bus); - if (pl->phydev) - phy_start(pl->phydev); - } -@@ -971,8 +971,8 @@ void phylink_stop(struct phylink *pl) - - if (pl->phydev) - phy_stop(pl->phydev); -- if (pl->sfp_bus) -- sfp_upstream_stop(pl->sfp_bus); -+ if (pl->netdev->sfp_bus) -+ sfp_upstream_stop(pl->netdev->sfp_bus); - if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio)) - del_timer_sync(&pl->link_poll); - diff --git a/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch b/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch deleted file mode 100644 index 9624b6cd81..0000000000 --- a/target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch +++ /dev/null @@ -1,155 +0,0 @@ -From 5f3ac54810055fec0cc667bb04c16f783830abff Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Fri, 14 Apr 2017 14:21:25 +0100 -Subject: [PATCH] net: phy: marvell10g: add SFP+ support - -Add support for SFP+ cages to the Marvell 10G PHY driver. This is -slightly complicated by the way phylib works in that we need to use -a multi-step process to attach the SFP bus, and we also need to track -the phylink state machine to know when the module's transmit disable -signal should change state. - -With appropriate DT changes, this allows the SFP+ canges on the -Macchiatobin platform to be functional. - -Signed-off-by: Russell King ---- - drivers/net/phy/marvell10g.c | 80 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 80 insertions(+) - ---- a/drivers/net/phy/marvell10g.c -+++ b/drivers/net/phy/marvell10g.c -@@ -25,6 +25,8 @@ - #include - #include - #include -+#include -+#include - - enum { - MV_PMA_BOOT = 0xc050, -@@ -56,6 +58,11 @@ enum { - }; - - struct mv3310_priv { -+ struct fwnode_handle *sfp_fwnode; -+ struct sfp_bus *sfp_bus; -+ enum phy_state state; -+ bool running; -+ - struct device *hwmon_dev; - char *hwmon_name; - }; -@@ -219,6 +226,27 @@ static int mv3310_hwmon_probe(struct phy - } - #endif - -+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -+{ -+ struct phy_device *phydev = upstream; -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; -+ phy_interface_t iface; -+ -+ sfp_parse_support(priv->sfp_bus, id, support); -+ iface = sfp_select_interface(priv->sfp_bus, id, support); -+ -+ if (iface != PHY_INTERFACE_MODE_10GKR) { -+ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static const struct sfp_upstream_ops mv3310_sfp_ops = { -+ .module_insert = mv3310_sfp_insert, -+}; -+ - static int mv3310_probe(struct phy_device *phydev) - { - struct mv3310_priv *priv; -@@ -249,9 +277,30 @@ static int mv3310_probe(struct phy_devic - if (ret) - return ret; - -+ if (phydev->mdio.dev.fwnode) { -+ struct fwnode_reference_args ref; -+ int ret; -+ -+ ret = fwnode_property_get_reference_args(phydev->mdio.dev.fwnode, -+ "sfp", NULL, 0, 0, -+ &ref); -+ if (ret == 0) -+ priv->sfp_fwnode = ref.fwnode; -+ } -+ - return 0; - } - -+static void mv3310_remove(struct phy_device *phydev) -+{ -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); -+ -+ if (priv->sfp_bus) -+ sfp_unregister_upstream(priv->sfp_bus); -+ -+ fwnode_handle_put(priv->sfp_fwnode); -+} -+ - static int mv3310_suspend(struct phy_device *phydev) - { - return 0; -@@ -262,8 +311,29 @@ static int mv3310_resume(struct phy_devi - return mv3310_hwmon_config(phydev, true); - } - -+static void mv3310_link_change_notify(struct phy_device *phydev) -+{ -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); -+ enum phy_state state = phydev->state; -+ bool running; -+ -+ if (priv->sfp_bus && priv->state != state) { -+ priv->state = state; -+ -+ running = state >= PHY_UP && state < PHY_HALTED; -+ if (priv->running != running) { -+ priv->running = running; -+ if (running) -+ sfp_upstream_start(priv->sfp_bus); -+ else -+ sfp_upstream_stop(priv->sfp_bus); -+ } -+ } -+} -+ - static int mv3310_config_init(struct phy_device *phydev) - { -+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); - __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; - u32 mask; - int val; -@@ -357,6 +427,14 @@ static int mv3310_config_init(struct phy - phydev->supported &= mask; - phydev->advertising &= phydev->supported; - -+ /* Would be nice to do this in the probe function, but unfortunately, -+ * phylib doesn't have phydev->attached_dev set there. -+ */ -+ if (priv->sfp_fwnode && !priv->sfp_bus) -+ priv->sfp_bus = sfp_register_upstream(priv->sfp_fwnode, -+ phydev->attached_dev, -+ phydev, &mv3310_sfp_ops); -+ - return 0; - } - -@@ -566,6 +644,8 @@ static struct phy_driver mv3310_drivers[ - .config_aneg = mv3310_config_aneg, - .aneg_done = mv3310_aneg_done, - .read_status = mv3310_read_status, -+ .remove = mv3310_remove, -+ .link_change_notify = mv3310_link_change_notify, - }, - }; - diff --git a/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch b/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch deleted file mode 100644 index 0c6cb72cb9..0000000000 --- a/target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 7e8bf5227f87601d8d74948bcae8846d2bdd6995 Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Fri, 14 Apr 2017 20:17:13 +0100 -Subject: [PATCH] sfp: add sfp+ compatible - -Add a compatible for SFP+ cages. SFP+ cages are backwards compatible, -but the ethernet device behind them may not support the slower speeds -of SFP modules. - -Signed-off-by: Russell King ---- - drivers/net/phy/sfp.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -230,6 +230,7 @@ static const struct sff_data sfp_data = - static const struct of_device_id sfp_of_match[] = { - { .compatible = "sff,sff", .data = &sff_data, }, - { .compatible = "sff,sfp", .data = &sfp_data, }, -+ { .compatible = "sff,sfp+", .data = &sfp_data, }, - { }, - }; - MODULE_DEVICE_TABLE(of, sfp_of_match); diff --git a/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch b/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch deleted file mode 100644 index 854ac68769..0000000000 --- a/target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch +++ /dev/null @@ -1,297 +0,0 @@ -From 4ce55fb01c473bf1ad2048f8b4db62dca392e6d2 Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Sun, 13 Sep 2015 01:06:31 +0100 -Subject: [PATCH] sfp: display SFP module information - -Signed-off-by: Russell King ---- - drivers/net/phy/sfp.c | 261 +++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 258 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -1132,6 +1132,184 @@ static void sfp_hwmon_remove(struct sfp - } - #endif - -+static const char *sfp_link_len(char *buf, size_t size, unsigned int length, -+ unsigned int multiplier) -+{ -+ if (length == 0) -+ return "unsupported/unspecified"; -+ -+ if (length == 255) { -+ *buf++ = '>'; -+ size -= 1; -+ length -= 1; -+ } -+ -+ length *= multiplier; -+ -+ if (length >= 1000) -+ snprintf(buf, size, "%u.%0*ukm", -+ length / 1000, -+ multiplier > 100 ? 1 : -+ multiplier > 10 ? 2 : 3, -+ length % 1000); -+ else -+ snprintf(buf, size, "%um", length); -+ -+ return buf; -+} -+ -+struct bitfield { -+ unsigned int mask; -+ unsigned int val; -+ const char *str; -+}; -+ -+static const struct bitfield sfp_options[] = { -+ { -+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL, -+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL, -+ .str = "hpl", -+ }, { -+ .mask = SFP_OPTIONS_PAGING_A2, -+ .val = SFP_OPTIONS_PAGING_A2, -+ .str = "paginga2", -+ }, { -+ .mask = SFP_OPTIONS_RETIMER, -+ .val = SFP_OPTIONS_RETIMER, -+ .str = "retimer", -+ }, { -+ .mask = SFP_OPTIONS_COOLED_XCVR, -+ .val = SFP_OPTIONS_COOLED_XCVR, -+ .str = "cooled", -+ }, { -+ .mask = SFP_OPTIONS_POWER_DECL, -+ .val = SFP_OPTIONS_POWER_DECL, -+ .str = "powerdecl", -+ }, { -+ .mask = SFP_OPTIONS_RX_LINEAR_OUT, -+ .val = SFP_OPTIONS_RX_LINEAR_OUT, -+ .str = "rxlinear", -+ }, { -+ .mask = SFP_OPTIONS_RX_DECISION_THRESH, -+ .val = SFP_OPTIONS_RX_DECISION_THRESH, -+ .str = "rxthresh", -+ }, { -+ .mask = SFP_OPTIONS_TUNABLE_TX, -+ .val = SFP_OPTIONS_TUNABLE_TX, -+ .str = "tunabletx", -+ }, { -+ .mask = SFP_OPTIONS_RATE_SELECT, -+ .val = SFP_OPTIONS_RATE_SELECT, -+ .str = "ratesel", -+ }, { -+ .mask = SFP_OPTIONS_TX_DISABLE, -+ .val = SFP_OPTIONS_TX_DISABLE, -+ .str = "txdisable", -+ }, { -+ .mask = SFP_OPTIONS_TX_FAULT, -+ .val = SFP_OPTIONS_TX_FAULT, -+ .str = "txfault", -+ }, { -+ .mask = SFP_OPTIONS_LOS_INVERTED, -+ .val = SFP_OPTIONS_LOS_INVERTED, -+ .str = "los-", -+ }, { -+ .mask = SFP_OPTIONS_LOS_NORMAL, -+ .val = SFP_OPTIONS_LOS_NORMAL, -+ .str = "los+", -+ }, { } -+}; -+ -+static const struct bitfield diagmon[] = { -+ { -+ .mask = SFP_DIAGMON_DDM, -+ .val = SFP_DIAGMON_DDM, -+ .str = "ddm", -+ }, { -+ .mask = SFP_DIAGMON_INT_CAL, -+ .val = SFP_DIAGMON_INT_CAL, -+ .str = "intcal", -+ }, { -+ .mask = SFP_DIAGMON_EXT_CAL, -+ .val = SFP_DIAGMON_EXT_CAL, -+ .str = "extcal", -+ }, { -+ .mask = SFP_DIAGMON_RXPWR_AVG, -+ .val = SFP_DIAGMON_RXPWR_AVG, -+ .str = "rxpwravg", -+ }, { } -+}; -+ -+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val) -+{ -+ char *p = out; -+ int n; -+ -+ *p = '\0'; -+ while (bits->mask) { -+ if ((val & bits->mask) == bits->val) { -+ n = snprintf(p, outsz, "%s%s", -+ out != p ? ", " : "", -+ bits->str); -+ if (n == outsz) -+ break; -+ p += n; -+ outsz -= n; -+ } -+ bits++; -+ } -+ -+ return out; -+} -+ -+static const char *sfp_connector(unsigned int connector) -+{ -+ switch (connector) { -+ case SFP_CONNECTOR_UNSPEC: -+ return "unknown/unspecified"; -+ case SFP_CONNECTOR_SC: -+ return "SC"; -+ case SFP_CONNECTOR_FIBERJACK: -+ return "Fiberjack"; -+ case SFP_CONNECTOR_LC: -+ return "LC"; -+ case SFP_CONNECTOR_MT_RJ: -+ return "MT-RJ"; -+ case SFP_CONNECTOR_MU: -+ return "MU"; -+ case SFP_CONNECTOR_SG: -+ return "SG"; -+ case SFP_CONNECTOR_OPTICAL_PIGTAIL: -+ return "Optical pigtail"; -+ case SFP_CONNECTOR_HSSDC_II: -+ return "HSSDC II"; -+ case SFP_CONNECTOR_COPPER_PIGTAIL: -+ return "Copper pigtail"; -+ default: -+ return "unknown"; -+ } -+} -+ -+static const char *sfp_encoding(unsigned int encoding) -+{ -+ switch (encoding) { -+ case SFP_ENCODING_UNSPEC: -+ return "unspecified"; -+ case SFP_ENCODING_8472_64B66B: -+ return "64b66b"; -+ case SFP_ENCODING_8B10B: -+ return "8b10b"; -+ case SFP_ENCODING_4B5B: -+ return "4b5b"; -+ case SFP_ENCODING_NRZ: -+ return "NRZ"; -+ case SFP_ENCODING_8472_MANCHESTER: -+ return "MANCHESTER"; -+ default: -+ return "unknown"; -+ } -+} -+ - /* Helpers */ - static void sfp_module_tx_disable(struct sfp *sfp) - { -@@ -1376,6 +1554,8 @@ static int sfp_sm_mod_probe(struct sfp * - { - /* SFP module inserted - read I2C data */ - struct sfp_eeprom_id id; -+ char date[9]; -+ char options[80]; - bool cotsworks; - u8 check; - int ret; -@@ -1432,12 +1612,87 @@ static int sfp_sm_mod_probe(struct sfp * - - sfp->id = id; - -- dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n", -+ date[0] = sfp->id.ext.datecode[4]; -+ date[1] = sfp->id.ext.datecode[5]; -+ date[2] = '-'; -+ date[3] = sfp->id.ext.datecode[2]; -+ date[4] = sfp->id.ext.datecode[3]; -+ date[5] = '-'; -+ date[6] = sfp->id.ext.datecode[0]; -+ date[7] = sfp->id.ext.datecode[1]; -+ date[8] = '\0'; -+ -+ dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %s\n", - (int)sizeof(id.base.vendor_name), id.base.vendor_name, - (int)sizeof(id.base.vendor_pn), id.base.vendor_pn, - (int)sizeof(id.base.vendor_rev), id.base.vendor_rev, -- (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, -- (int)sizeof(id.ext.datecode), id.ext.datecode); -+ (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, date); -+ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n", -+ sfp_connector(sfp->id.base.connector), -+ sfp_encoding(sfp->id.base.encoding), -+ sfp->id.base.br_nominal / 10, -+ sfp->id.base.br_nominal % 10, -+ sfp->id.ext.br_max, sfp->id.ext.br_min); -+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseLX%c 100BaseFX%c BaseBX10%c BasePX%c\n", -+ sfp->id.base.e1000_base_sx ? '+' : '-', -+ sfp->id.base.e1000_base_lx ? '+' : '-', -+ sfp->id.base.e1000_base_cx ? '+' : '-', -+ sfp->id.base.e1000_base_t ? '+' : '-', -+ sfp->id.base.e100_base_lx ? '+' : '-', -+ sfp->id.base.e100_base_fx ? '+' : '-', -+ sfp->id.base.e_base_bx10 ? '+' : '-', -+ sfp->id.base.e_base_px ? '+' : '-'); -+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n", -+ sfp->id.base.e10g_base_sr ? '+' : '-', -+ sfp->id.base.e10g_base_lr ? '+' : '-', -+ sfp->id.base.e10g_base_lrm ? '+' : '-', -+ sfp->id.base.e10g_base_er ? '+' : '-'); -+ -+ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active && -+ !sfp->id.base.e1000_base_t) { -+ char len_9um[16], len_om[16]; -+ -+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n", -+ be16_to_cpup(&sfp->id.base.optical_wavelength)); -+ -+ if (sfp->id.base.link_len[0] == 255) -+ strcpy(len_9um, ">254km"); -+ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255) -+ sprintf(len_9um, "%um", -+ sfp->id.base.link_len[1] * 100); -+ else if (sfp->id.base.link_len[0]) -+ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]); -+ else if (sfp->id.base.link_len[1] == 255) -+ strcpy(len_9um, ">25.4km"); -+ else -+ strcpy(len_9um, "unsupported"); -+ -+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um); -+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[3], 10)); -+ dev_info(sfp->dev, " 50µm MM OM2: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[2], 10)); -+ dev_info(sfp->dev, " 50µm MM OM3: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[5], 10)); -+ dev_info(sfp->dev, " 50µm MM OM4: %s\n", -+ sfp_link_len(len_om, sizeof(len_om), -+ sfp->id.base.link_len[4], 10)); -+ } else { -+ char len[16]; -+ dev_info(sfp->dev, " Copper length: %s\n", -+ sfp_link_len(len, sizeof(len), -+ sfp->id.base.link_len[4], 1)); -+ } -+ -+ dev_info(sfp->dev, " Options: %s\n", -+ sfp_bitfield(options, sizeof(options), sfp_options, -+ be16_to_cpu(sfp->id.ext.options))); -+ dev_info(sfp->dev, " Diagnostics: %s\n", -+ sfp_bitfield(options, sizeof(options), diagmon, -+ sfp->id.ext.diagmon)); - - /* Check whether we support this module */ - if (!sfp->type->module_supported(&sfp->id)) { diff --git a/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch b/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch deleted file mode 100644 index 69a31cb9f0..0000000000 --- a/target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch +++ /dev/null @@ -1,44 +0,0 @@ -From e26af2726067ff260b77485df6af8375b82bfb1d Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Sat, 23 Dec 2017 12:22:58 +0000 -Subject: [PATCH] sfp: more cotsworks fixes - -Cotsworks also gets the date code wrong. - -Signed-off-by: Russell King ---- - drivers/net/phy/sfp.c | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -1571,9 +1571,9 @@ static int sfp_sm_mod_probe(struct sfp * - return -EAGAIN; - } - -- /* Cotsworks do not seem to update the checksums when they -- * do the final programming with the final module part number, -- * serial number and date code. -+ /* Cotsworks do not seem to update the checksums when they update the -+ * module part number, serial number and date code. They also format -+ * the date code incorrectly. - */ - cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16); - -@@ -1612,11 +1612,12 @@ static int sfp_sm_mod_probe(struct sfp * - - sfp->id = id; - -- date[0] = sfp->id.ext.datecode[4]; -- date[1] = sfp->id.ext.datecode[5]; -+ /* Cotsworks also gets the date code wrong. */ -+ date[0] = sfp->id.ext.datecode[4 - 2 * cotsworks]; -+ date[1] = sfp->id.ext.datecode[5 - 2 * cotsworks]; - date[2] = '-'; -- date[3] = sfp->id.ext.datecode[2]; -- date[4] = sfp->id.ext.datecode[3]; -+ date[3] = sfp->id.ext.datecode[2 + 2 * cotsworks]; -+ date[4] = sfp->id.ext.datecode[3 + 2 * cotsworks]; - date[5] = '-'; - date[6] = sfp->id.ext.datecode[0]; - date[7] = sfp->id.ext.datecode[1]; diff --git a/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch deleted file mode 100644 index 833c515a11..0000000000 --- a/target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 29 Sep 2016 11:44:39 +0200 -Subject: [PATCH] sfp: retry phy probe if unsuccessful - -Some phys seem to take longer than 50 ms to come out of reset, so retry -until we find a phy. - -Signed-off-by: Jonas Gorski ---- - drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++------------- - 1 file changed, 25 insertions(+), 13 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -1374,7 +1374,7 @@ static void sfp_sm_phy_detach(struct sfp - sfp->mod_phy = NULL; - } - --static void sfp_sm_probe_phy(struct sfp *sfp) -+static int sfp_sm_probe_phy(struct sfp *sfp) - { - struct phy_device *phy; - int err; -@@ -1384,11 +1384,11 @@ static void sfp_sm_probe_phy(struct sfp - phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); - if (phy == ERR_PTR(-ENODEV)) { - dev_info(sfp->dev, "no PHY detected\n"); -- return; -+ return -EAGAIN; - } - if (IS_ERR(phy)) { - dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); -- return; -+ return PTR_ERR(phy); - } - - err = sfp_add_phy(sfp->sfp_bus, phy); -@@ -1396,11 +1396,13 @@ static void sfp_sm_probe_phy(struct sfp - phy_device_remove(phy); - phy_device_free(phy); - dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); -- return; -+ return err; - } - - sfp->mod_phy = phy; - phy_start(phy); -+ -+ return 0; - } - - static void sfp_sm_link_up(struct sfp *sfp) -@@ -1464,14 +1466,9 @@ static void sfp_sm_fault(struct sfp *sfp - - static void sfp_sm_mod_init(struct sfp *sfp) - { -- sfp_module_tx_enable(sfp); -+ int ret = 0; - -- /* Wait t_init before indicating that the link is up, provided the -- * current state indicates no TX_FAULT. If TX_FAULT clears before -- * this time, that's fine too. -- */ -- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); -- sfp->sm_retries = 5; -+ sfp_module_tx_enable(sfp); - - /* Setting the serdes link mode is guesswork: there's no - * field in the EEPROM which indicates what mode should -@@ -1485,7 +1482,22 @@ static void sfp_sm_mod_init(struct sfp * - if (sfp->id.base.e1000_base_t || - sfp->id.base.e100_base_lx || - sfp->id.base.e100_base_fx) -- sfp_sm_probe_phy(sfp); -+ ret = sfp_sm_probe_phy(sfp); -+ -+ if (!ret) { -+ /* Wait t_init before indicating that the link is up, provided -+ * the current state indicates no TX_FAULT. If TX_FAULT clears -+ * this time, that's fine too. -+ */ -+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); -+ sfp->sm_retries = 5; -+ return; -+ } -+ -+ if (ret == -EAGAIN) -+ sfp_sm_set_timer(sfp, T_PROBE_RETRY); -+ else -+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); - } - - static int sfp_sm_mod_hpower(struct sfp *sfp)