From: Samuele Longhi Date: Sat, 12 Oct 2024 16:20:49 +0000 (+0200) Subject: ramips: mt7621: add support for Gemtek WVRTM-127ACN and WVRTM-130ACN X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e80b596c58b361c76491b4ec1bd8865d2ccefe7e;p=openwrt%2Fstaging%2Fpepe2k.git ramips: mt7621: add support for Gemtek WVRTM-127ACN and WVRTM-130ACN The Gemtek WVRTM-127ACN is an indoor dual band wifi router with internal antennas and 3 Gigabit Ethernet ports. The Gemtek WVRTM-130ACN is an indoor dual band wifi router with external antennas and 5 Gigabit Ethernet ports. Hardware of WVRTM-127ACN: - SoC: Mediatek MT7621AT (880 MHz, dual core) - RAM: 128 MB - Storage: 128 MB NAND SLC flash - Ethernet: 3x 10/100/1000 Mbps LAN1,LAN2 & WAN - Wireless: 2.4GHz: Mediatek MT7603EN (802.11b/g/n) - Wireless: 5GHz: Mediatek MT7612EN (802.11n/ac) - LEDs: 11x - Buttons: 2x WPS, reset - USB: 1x 3.0 - Power: 56 VDC, 0.54 A, PoE+ IN (WAN) - PoE: 1x PoE+ 802.3af/at (WAN) - Uart: GND RX TX VCC - J2 (GND near WAN) - Board silkscreen: "WVRTM-127ACN_V02" "19K-513-8500R" "RoHS" "1717" Hardware of WVRTM-130ACN: - SoC: Mediatek MT7621AT (880 MHz, dual core) - RAM: 128 MB (Kioxia TC58BVG0S3HTA00) - Storage: 128 MB NAND SLC (Winbond W971GG6SB-25) - Ethernet: 5x 10/100/1000 Mbps LAN1,LAN2,LAN3,LAN4 & WAN - Wireless: 2.4GHz and 5GHz Mediatek MT7615DN (802.11ac/b/g/n) (DBDC) - LEDs: 10x - Buttons: 3x Power, WPS, reset - USB: 1x 3.0 - Power: 56 VDC, 0.54 A, PoE+ (WAN) - PoE: 1x PoE+ 802.3af/at (WAN) - Uart: GND RX TX VCC - J2 (GND near WAN) - Board silkscreen: "WVRTM-130ACN_V01" "19K-515-4500R" "RoHS" "2112" Enable access to uboot menu (needed in wvrtm-130acn): - The access to uboot menu is blocked by `bootdelay = 0` set in ubootenv. With stock firmware version 01.01.02.163 and previous, you can use CVE 2020-24365 command injection https://nvd.nist.gov/vuln/detail/CVE-2020-24365 python3 exploit.py -t 192.168.1.1 -c "fw_setenv bootdelay 3; fw_saveenv" Backup the stock firmware: - Connect via uart - Connect via ethernet and assign your pc the address 192.168.15.x/24 - Power on the device; and start typing '4' to enter uboot menu - Set factory mode and boot MT7621 # setenv factory 2; saveenv MT7621 # nand read 2800000 2000000 81000000; bootm - Telnet and copy all mtd blocks telnet 192.168.15.1 - Copy all mtd blocks and start webserver for N in $(seq 0 6); do dd if=/dev/mtd$N of=/tmp/eeprom_mtd$N.bin; done mount -o bind /tmp /www lighttpd -f /etc/lighttpd.conf - Backup stock rootfs_data (optional) dd if=/dev/mtd7 of=/tmp/eeprom_mtd7.bin dd if=/dev/mtd8 of=/tmp/eeprom_mtd8.bin - Download to your pc from http://192.168.15.1/eeprom_mtd$N.bin Installation: - Connect via uart - Connect via ethernet and assign your pc the address 10.10.10.3/24 - Start a tftp server and serve the image initramfs-kernel.bin mkdir /tmp/ftpd; cp initramfs-kernel.bin /tmp/ftpd/kernel.bin dnsmasq --enable-tftp --tftp-root=/tmp/ftpd - Power on the device; and start typing '4' to halt the bootloader - Change the active mtd partition from mtd6 to mtd5 (needed by uboot) MT7621 # setenv mtddevnum 5; saveenv - Write the openwrt initramfs in ram via tftp and boot it MT7621 # tftpboot 81000000 kernel.bin; bootm - From the initramfs create the ubi device and install openwrt via sysupgrade ubiformat /dev/mtd11 -y sysupgrade -n -v /tmp/sysupgrade.bin Recovery: Restore the stock firmware from the backup of the mtd blocks mtd write eeprom_mtd5.bin firmware mtd write eeprom_mtd6.bin Kernel2 mtd write eeprom_mtd7.bin Storage1 mtd write eeprom_mtd8.bin Storage2 ubiformat /dev/mtd8 -y reboot Links to previous works on wvrtm-127acn: https://github.com/digiampietro/hacking-gemtek https://forum.openwrt.org/t/add-support-for-gemtek-wvrtm-127acn-linkem-provider/168757 Signed-off-by: Samuele Longhi Link: https://github.com/openwrt/openwrt/pull/16685 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7621_gemtek_wvrtm-127acn.dts b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-127acn.dts new file mode 100644 index 0000000000..5cc287f6cc --- /dev/null +++ b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-127acn.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_gemtek_wvrtm-1xxacn.dtsi" + +/ { + compatible = "gemtek,wvrtm-127acn", "mediatek,mt7621-soc"; + model = "Gemtek WVRTM-127ACN"; +}; + +&nvmem_layout { + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x200>; + }; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <2400000 2500000>; + + led { + led-sources = <0>; + led-active-low; + }; + }; +}; + +&ports { + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_gemtek_wvrtm-130acn.dts b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-130acn.dts new file mode 100644 index 0000000000..eb5c079901 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-130acn.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_gemtek_wvrtm-1xxacn.dtsi" + +/ { + compatible = "gemtek,wvrtm-130acn", "mediatek,mt7621-soc"; + model = "Gemtek WVRTM-130ACN"; +}; + +&eeprom_factory_0 { + reg = <0x0 0x4da8>; +}; + +&macaddr_factory_4 { + compatible = "mac-base"; + #nvmem-cell-cells = <1>; +}; + +&keys { + button-2 { + label = "power"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + linux,code = ; + }; +}; + +&leds { + led-7 { + gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_WPS; + color = ; + }; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + #address-cells = <2>; + #size-cells = <0>; + + band@0 { + /* 2.4 GHz */ + reg = <0>; + nvmem-cells = <&macaddr_factory_4 (-1)>; + nvmem-cell-names = "mac-address"; + /* led_pin 0 */ + }; + + band@1 { + /* 5 GHz */ + reg = <1>; + nvmem-cells = <&macaddr_factory_4 0>; + nvmem-cell-names = "mac-address"; + /* led_pin 2 */ + }; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_gemtek_wvrtm-1xxacn.dtsi b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-1xxacn.dtsi new file mode 100644 index 0000000000..da334508ec --- /dev/null +++ b/target/linux/ramips/dts/mt7621_gemtek_wvrtm-1xxacn.dtsi @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" +#include +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = &gmac0; + }; + + chosen { + bootargs-override = "console=ttyS0,115200n1"; + }; + + gpio-export { + compatible = "gpio-export"; + + poe_24v_port4 { + gpio-export,name = "24v-poe:port4"; + gpio-export,output = <0>; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + }; + }; + + keys: keys { + compatible = "gpio-keys"; + + button-0 { + label = "wps"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "reset"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + num-chipselects = <0>; + + gpio_hc595: gpio_hc595@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <1000000>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_INDICATOR; + color = ; + function-enumerator = <0>; + }; + + led-1 { + gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_INDICATOR; + color = ; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_INDICATOR; + color = ; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_INDICATOR; + color = ; + function-enumerator = <3>; + }; + + led-4 { + gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_INDICATOR; + color = ; + function-enumerator = <4>; + }; + + led_power: led-5 { + gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = ; + }; + + led-6 { + gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + color = ; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + reg_usb_vbus: regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ubi-concat { + compatible = "mtd-concat"; + devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 &ubiconcat3>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x7380000>; + }; + }; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot2"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "factory"; + reg = <0x200000 0x100000>; + read-only; + + nvmem_layout: nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x200>; + }; + + macaddr_factory_4: eeprom@4 { + reg = <0x4 0x6>; + }; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; + }; + }; + + partition@300000 { + label = "u-boot-env"; + reg = <0x300000 0x280000>; + read-only; + }; + + partition@580000 { + label = "u-boot-env2"; + reg = <0x580000 0x280000>; + read-only; + }; + + partition@800000 { + label = "firmware"; + reg = <0x800000 0x2000000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + ubiconcat0: partition@400000 { + label = "ubiconcat0"; + reg = <0x400000 0x1c00000>; + }; + }; + + ubiconcat1: partition@2800000 { + label = "Kernel2"; + reg = <0x2800000 0x2000000>; + }; + + ubiconcat2: partition@4800000 { + label = "Storage1"; + reg = <0x4800000 0x1c00000>; + }; + + ubiconcat3: partition@6400000 { + label = "Storage2"; + reg = <0x6400000 0x1b80000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&state_default { + gpio { + groups = "rgmii2", "uart3"; + function = "gpio"; + }; +}; + +&switch0 { + ports: ports { + port@4 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + }; + }; +}; + +&xhci { + vbus-supply = <®_usb_vbus>; + vusb33-supply = <®_3p3v>; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 70454bcbaf..753e637adb 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1382,6 +1382,29 @@ define Device/gehua_ghl-r-001 endef TARGET_DEVICES += gehua_ghl-r-001 +define Device/gemtek_wvrtm-1xxacn + $(Device/nand) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 122368k + DEVICE_VENDOR := Gemtek + DEVICE_PACKAGES := kmod-gpio-nxp-74hc164 kmod-spi-gpio \ + kmod-usb3 -uboot-envtools +endef + +define Device/gemtek_wvrtm-127acn + $(Device/gemtek_wvrtm-1xxacn) + DEVICE_MODEL := WVRTM-127ACN + DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 +endef +TARGET_DEVICES += gemtek_wvrtm-127acn + +define Device/gemtek_wvrtm-130acn + $(Device/gemtek_wvrtm-1xxacn) + DEVICE_MODEL := WVRTM-130ACN + DEVICE_PACKAGES += kmod-mt7615-firmware +endef +TARGET_DEVICES += gemtek_wvrtm-130acn + define Device/glinet_gl-mt1300 $(Device/dsa-migration) IMAGE_SIZE := 32448k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 471f9ecfbd..c780443c1c 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -80,6 +80,7 @@ ramips_setup_interfaces() beeline,smartbox-giga|\ elecom,wmc-x1800gst|\ elecom,wrc-x1800gs|\ + gemtek,wvrtm-127acn|\ glinet,gl-mt1300|\ iodata,wn-deax1800gr|\ iptime,a3002mesh|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 97887ca8c3..17532f795b 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -99,6 +99,8 @@ platform_do_upgrade() { h3c,tx1806|\ haier,har-20s2u1|\ hiwifi,hc5962|\ + gemtek,wvrtm-127acn|\ + gemtek,wvrtm-130acn|\ iptime,a3004t|\ iptime,ax2004m|\ iptime,t5004|\