From: Thomas Herzmann <thomas.herzmann@keymile.com>
Date: Fri, 8 Apr 2011 02:47:41 +0000 (+0000)
Subject: km/common: fix initial_boot_bank for bootpackages
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e80ab3e661428149105b5454c6111d17ddfb3b40;p=project%2Fbcm63xx%2Fu-boot.git

km/common: fix initial_boot_bank for bootpackages

The initial_boot_bank can be set when more than one application is
used in a bootpackage. But a value n <> 0 never led to booting from
bank n. Instead, bank 0 was booted. This patch fixes this.

Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
---

diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index cb6d0fb6c8..bc8a8961da 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -247,10 +247,10 @@
 		"printbootargs boot "					\
 		"\" && "						\
 		"setenv bootcmd \'"					\
-		"run bootrunner; reset"					\
+		"run actual bootrunner; reset"				\
 		"\' && "						\
 		"setenv altbootcmd \'"					\
-		"run actual0 bootcmd; reset"				\
+		"run backup bootrunner; reset"				\
 		"\' && "						\
 		"saveenv && "						\
 		"reset\0"						\
@@ -288,7 +288,7 @@
 	"addramfs="							\
 		"setenv bootargs \""					\
 		"${bootargs} phram.phram="				\
-		"rootfs${actual_bank},${rootfsaddr},${rootfssize}\"\0"	\
+		"rootfs${boot_bank},${rootfsaddr},${rootfssize}\"\0"	\
 	"addtty="							\
 		"setenv bootargs ${bootargs}"				\
 		" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0"	\
@@ -303,7 +303,7 @@
 	"flashargs="							\
 		"setenv bootargs "					\
 		"ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " "		\
-		"root=mtdblock:rootfs${actual_bank} "			\
+		"root=mtdblock:rootfs${boot_bank} "			\
 		"rootfstype=squashfs ro\0"				\
 	""
 
@@ -352,7 +352,7 @@
 		"cramfsload ${kernel_addr_r} uImage && "		\
 		"setenv actual_kernel_addr ${kernel_addr_r}\0"		\
 	"ubiattach=ubi part ${ubipartition}\0"				\
-	"ubicopy=ubi read ${cramfsaddr} bootfs${actual_bank}\0"		\
+	"ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0"		\
 	"ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0"		\
 	""
 
@@ -382,9 +382,10 @@
  * - 'default': setup default environment
  */
 #define CONFIG_KM_DEF_ENV_CONSTANTS					\
-	"actual=setenv actual_bank ${initial_boot_bank}\0"		\
-	"actual0=setenv actual_bank 0\0"				\
+	"actual=setenv boot_bank ${actual_bank}\0"			\
+	"backup=setenv boot_bank ${backup_bank}\0"			\
 	"actual_bank=${initial_boot_bank}\0"				\
+	"backup_bank=0\0"						\
 	"default="							\
 		"setenv default 'run newenv; reset' &&  "		\
 		"run release && saveenv; reset\0"			\