From: Sumit Garg Date: Tue, 14 Jun 2016 17:52:40 +0000 (-0400) Subject: arm: ls1021atwr: Add SD secure boot target X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e7e720c2cef046f67f23db0a54bd65f8b662531e;p=project%2Fbcm63xx%2Fu-boot.git arm: ls1021atwr: Add SD secure boot target Add SD secure boot target for ls1021atwr. Implement board specific spl_board_init() to setup CAAM stream ID and corresponding stream ID in SMMU. Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. Reviewed-by: Aneesh Bansal Signed-off-by: Sumit Garg Reviewed-by: Simon Glass Reviewed-by: York Sun --- diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index c69c9cba42..77482a947b 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -503,6 +503,13 @@ int board_init(void) return 0; } +#if defined(CONFIG_SPL_BUILD) +void spl_board_init(void) +{ + ls102xa_smmu_stream_id_init(); +} +#endif + #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig new file mode 100644 index 0000000000..c735d6da5e --- /dev/null +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1021ATWR=y +CONFIG_SPL=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SECURE_BOOT" +CONFIG_BOOTDELAY=0 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_OF_LIBFDT=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_RSA=y +CONFIG_DM=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 616aebb4e9..c588fdd34f 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -124,7 +124,18 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. + */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (0x400 + \ + (CONFIG_U_BOOT_HDR_SIZE / 512) +#else #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#endif /* ifdef CONFIG_SECURE_BOOT */ #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -137,7 +148,18 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 + +#ifdef CONFIG_U_BOOT_HDR_SIZE +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE) +#else #define CONFIG_SYS_MONITOR_LEN 0x80000 +#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif #ifdef CONFIG_QSPI_BOOT