From: Alan Swanson <reiver@improbability.net>
Date: Wed, 29 May 2019 10:40:21 +0000 (+0100)
Subject: lantiq: BTHOMEHUBV5A: don't power off with restart button
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e7bd254ed98e3b41fbcabe0e069601c2d5aeaf58;p=openwrt%2Fstaging%2Faparcar.git

lantiq: BTHOMEHUBV5A: don't power off with restart button

The restart button is currently assigned to KEY_POWER power script but
an easily accessible button immediately powering off the device is
undesirable. Switch to using new KEY_POWER2 reboot script with 5 second
seen delay.

Fixes: FS#1965
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
---

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
index c251fc3fc7..166eec3419 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
@@ -48,7 +48,7 @@
 		restart {
 			label = "restart";
 			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_POWER2>;
 		};
 	};