From: Rafał Miłecki <rafal@milecki.pl>
Date: Thu, 21 Jan 2021 12:23:56 +0000 (+0100)
Subject: bcm4908: append UBI with rootfs to device images
X-Git-Tag: v21.02.0-rc1~485
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e78d3e44dddaaa89e101b42574f13bc6aeb6b6ae;p=openwrt%2Fopenwrt.git

bcm4908: append UBI with rootfs to device images

Also enable UBI kernel support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---

diff --git a/target/linux/bcm4908/config-5.4 b/target/linux/bcm4908/config-5.4
index aa2e088756..3dfa7b21dc 100644
--- a/target/linux/bcm4908/config-5.4
+++ b/target/linux/bcm4908/config-5.4
@@ -52,13 +52,19 @@ CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_COMMON_CLK=y
 CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_NULL2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_ZSTD=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DMA_REMAP=y
@@ -114,10 +120,13 @@ CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_DOMAIN_HIERARCHY=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
+# CONFIG_JFFS2_FS is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_MDIO_BCM_UNIMAC=y
 CONFIG_MDIO_BUS=y
 CONFIG_MDIO_DEVICE=y
@@ -129,6 +138,11 @@ CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_CORE=y
 CONFIG_MTD_NAND_ECC_SW_HAMMING=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPLIT_BCM_WFI_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_SG_DMA_LENGTH=y
@@ -180,6 +194,7 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SGL_ALLOC=y
 CONFIG_SMP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSE_IRQ=y
@@ -194,8 +209,18 @@ CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
 CONFIG_TREE_RCU=y
 CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_ZSTD=y
 CONFIG_UNMAP_KERNEL_AT_EL0=y
 CONFIG_USB_SUPPORT=y
 CONFIG_VMAP_STACK=y
 CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZONE_DMA32=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/bcm4908/image/Makefile b/target/linux/bcm4908/image/Makefile
index afe88e6902..d6b5f07e2a 100644
--- a/target/linux/bcm4908/image/Makefile
+++ b/target/linux/bcm4908/image/Makefile
@@ -23,7 +23,8 @@ define Build/bcm4908img
 	cp $(IMAGE_KERNEL) $@-bootfs/vmlinux.lz
 
 	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad --little-endian --squash-uids -v -e 128KiB -o $@-bootfs.jffs2 -d $@-bootfs -m none -n
-	$(STAGING_DIR_HOST)/bin/bcm4908img create $@ -f $@-bootfs.jffs2
+	$(STAGING_DIR_HOST)/bin/bcm4908img create $@.new -f $@-bootfs.jffs2 -a 0x20000 -f $@
+	mv $@.new $@
 endef
 
 define Device/Default
@@ -43,7 +44,7 @@ define Device/asus_gt-ac5300
   DEVICE_MODEL := GT-AC5300
   DEVICE_DTS := broadcom/bcm4908/bcm4908-asus-gt-ac5300
   IMAGES := bin
-  IMAGE/bin := bcm4908img
+  IMAGE/bin := append-ubi | bcm4908img
 endef
 TARGET_DEVICES += asus_gt-ac5300
 
@@ -52,7 +53,7 @@ define Device/netgear_r8000p
   DEVICE_MODEL := R8000P
   DEVICE_DTS := broadcom/bcm4908/bcm4906-netgear-r8000p
   IMAGES := bin
-  IMAGE/bin := bcm4908img
+  IMAGE/bin := append-ubi | bcm4908img
 endef
 TARGET_DEVICES += netgear_r8000p