From: Lokesh Vutla Date: Wed, 9 Mar 2016 10:09:33 +0000 (+0530) Subject: am335x: configs: Fix usb ether boot support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e77faeb7977a802905ec3a93781296ae1539fa85;p=project%2Fbcm63xx%2Fu-boot.git am335x: configs: Fix usb ether boot support CONFIG_SPL_NET_VCI_STRING is available only with BOOTP. So if CMD_DHCP is enabled for SPL in usb ether boot, it will not pass the right vendor name and failing to download the right file. Also all the net CMD_* are not required in SPL builds. So defining these only for non-SPL builds. Reported-by: Yan Liu Signed-off-by: Lokesh Vutla Reviewed-by: Sekhar Nori Reviewed-by: Tom Rini --- diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index edbd820549..4535b8cbea 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -28,6 +28,7 @@ #endif #define CONFIG_SYS_NS16550_CLK 48000000 +#ifndef CONFIG_SPL_BUILD /* Network defines. */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -38,9 +39,10 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_CMD_PING -#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ +#endif +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ /* * RTC related defines. To use bootcount you must set bootlimit in the * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT