From: Piotr Dymacz Date: Thu, 16 Jun 2016 16:08:03 +0000 (+0200) Subject: ar71xx: add support for Wallys DR531 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e767980eb897fbefc320f97b65944ce690ed1726;p=openwrt%2Fstaging%2Fdedeckeh.git ar71xx: add support for Wallys DR531 Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 6936b8c873..77bed5b73e 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -156,6 +156,11 @@ db120) ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1" ;; +dr531) + ucidef_set_led_netdev "lan" "LAN" "dr531:green:lan" "eth0" + ucidef_set_led_netdev "wan" "WAN" "dr531:green:wan" "eth1" + ;; + dragino2) ucidef_set_led_wlan "wlan" "WLAN" "dragino2:red:wlan" "phy0tpt" ucidef_set_led_netdev "lan" "LAN" "dragino2:red:lan" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 1ed593cc55..0922550017 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -426,6 +426,7 @@ unifiac-pro) "0@eth0" "2:lan" "3:wan" ;; +dr531 |\ wpj531) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 520fef8097..08e5fd0fc1 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -113,6 +113,9 @@ get_status_led() { dr344) status_led="dr344:green:status" ;; + dr531) + status_led="dr531:green:sig4" + ;; dragino2) status_led="dragino2:red:system" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 5b81f739f4..936725fa58 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -505,6 +505,9 @@ ar71xx_board_detect() { *DR344) name="dr344" ;; + *DR531) + name="dr531" + ;; *"Dragino v2") name="dragino2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 313e2e639b..f5a8d0d0a7 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -224,6 +224,7 @@ platform_check_image() { dlan-hotspot | \ dlan-pro-500-wp | \ dlan-pro-1200-ac | \ + dr531 | \ dragino2 | \ epg5000 | \ esr1750 | \ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 79d703b3db..4ecd09920f 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -76,6 +76,7 @@ CONFIG_ATH79_MACH_DLAN_HOTSPOT=y CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y CONFIG_ATH79_MACH_DR344=y +CONFIG_ATH79_MACH_DR531=y CONFIG_ATH79_MACH_DRAGINO2=y CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 52b9b5527e..9ab6fed9b7 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -522,6 +522,16 @@ config ATH79_MACH_DR344 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_DR531 + bool "Wallys DR531 board support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_DRAGINO2 bool "DRAGINO V2 support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index f8b0b2bb5a..33c274fcc4 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o +obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c new file mode 100644 index 0000000000..b638a9001c --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c @@ -0,0 +1,155 @@ +/* + * Wallys DR531 board support + * + * Copyright (C) 2016 Piotr Dymacz + * + * Based on mach-wpj531.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define DR531_GPIO_BUZZER 4 +#define DR531_GPIO_LED_WAN 11 +#define DR531_GPIO_LED_LAN 14 +#define DR531_GPIO_LED_SIG1 12 +#define DR531_GPIO_LED_SIG2 16 +#define DR531_GPIO_LED_SIG3 15 +#define DR531_GPIO_LED_SIG4 13 + +#define DR531_GPIO_BTN_RESET 17 + +#define DR531_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DR531_KEYS_DEBOUNCE_INTERVAL (3 * DR531_KEYS_POLL_INTERVAL) + +#define DR531_MAC0_OFFSET 0x0 +#define DR531_MAC1_OFFSET 0x8 +#define DR531_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led dr531_leds_gpio[] __initdata = { + { + .name = "dr531:green:wan", + .gpio = DR531_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "dr531:green:lan", + .gpio = DR531_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "dr531:green:sig1", + .gpio = DR531_GPIO_LED_SIG1, + .active_low = 1, + }, + { + .name = "dr531:green:sig2", + .gpio = DR531_GPIO_LED_SIG2, + .active_low = 1, + }, + { + .name = "dr531:green:sig3", + .gpio = DR531_GPIO_LED_SIG3, + .active_low = 1, + }, + { + .name = "dr531:green:sig4", + .gpio = DR531_GPIO_LED_SIG4, + .active_low = 1, + }, + { + .name = "dr531:buzzer", + .gpio = DR531_GPIO_BUZZER, + .active_low = 0, + } +}; + +static struct gpio_keys_button dr531_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DR531_KEYS_DEBOUNCE_INTERVAL, + .gpio = DR531_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init dr531_gpio_setup(void) +{ + ath79_gpio_direction_select(DR531_GPIO_BUZZER, true); + ath79_gpio_direction_select(DR531_GPIO_LED_WAN, true); + ath79_gpio_direction_select(DR531_GPIO_LED_LAN, true); + ath79_gpio_direction_select(DR531_GPIO_LED_SIG1, true); + ath79_gpio_direction_select(DR531_GPIO_LED_SIG2, true); + ath79_gpio_direction_select(DR531_GPIO_LED_SIG3, true); + ath79_gpio_direction_select(DR531_GPIO_LED_SIG4, true); + + ath79_gpio_output_select(DR531_GPIO_BUZZER, 0); + ath79_gpio_output_select(DR531_GPIO_LED_WAN, 0); + ath79_gpio_output_select(DR531_GPIO_LED_LAN, 0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dr531_leds_gpio), + dr531_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DR531_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dr531_gpio_keys), + dr531_gpio_keys); +} + +static void __init dr531_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); + + ath79_register_m25p80(NULL); + + dr531_gpio_setup(); + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_mdio(0, 0x0); + + /* LAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); + ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR531_MAC1_OFFSET, 0); + ath79_register_eth(0); + + /* WAN */ + ath79_switch_data.phy4_mii_en = 1; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR531_MAC0_OFFSET, 0); + ath79_register_eth(1); + + ath79_register_wmac(art + DR531_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_DR531, "DR531", "Wallys DR531", dr531_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index f40b4a43b5..3425ce901b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -72,6 +72,7 @@ enum ath79_mach_type { ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ ATH79_MACH_DR344, /* Wallys DR344 */ + ATH79_MACH_DR531, /* Wallys DR531 */ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index ea3273e141..bff3d263cc 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -67,6 +67,15 @@ define Device/gl-domino endef TARGET_DEVICES += gl-domino +define Device/dr531 + DEVICE_TITLE := Wallys DR531 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + BOARDNAME = DR531 + IMAGE_SIZE = 7808k + MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro +endef +TARGET_DEVICES += dr531 + define Device/wndr3700 DEVICE_TITLE := NETGEAR WNDR3700 DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev kmod-leds-wndr3700-usb