From: Linus Walleij Date: Tue, 21 May 2024 07:30:28 +0000 (+0200) Subject: ixp4xx: Add back support for D-Link DSM G600 A X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e7661a808e87753f47cea02312c85389f323ddf7;p=openwrt%2Fstaging%2Fansuel.git ixp4xx: Add back support for D-Link DSM G600 A OpenWrt supported the D-Link DSM G600 A in the past. It has 64 MB of RAM and 16 MB of flash so it will run just fine, and should be quite usable with a rootfs on an external harddrive. Signed-off-by: Linus Walleij --- diff --git a/target/linux/ixp4xx/base-files/etc/board.d/02_network b/target/linux/ixp4xx/base-files/etc/board.d/02_network index 7f75a2e20d..6a361d4f53 100644 --- a/target/linux/ixp4xx/base-files/etc/board.d/02_network +++ b/target/linux/ixp4xx/base-files/etc/board.d/02_network @@ -9,6 +9,7 @@ gateworks,gw2348|\ gateworks,gw2358) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; +dlink,dsm-g600-a|\ iom,nas-100d|\ linksys,nslu2) ucidef_set_interface_lan "eth0" "dhcp" diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile index 15f40821eb..ace533e50f 100644 --- a/target/linux/ixp4xx/image/Makefile +++ b/target/linux/ixp4xx/image/Makefile @@ -46,6 +46,18 @@ define Device/Default BLOCKSIZE := 128k endef +define Device/dlink_dsm_g600_a + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DSM G600 A + DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-pcf8563 kmod-via-velocity kmod-ata-artop kmod-ath5k wpad-basic-mbedtls + DEVICE_DTS := intel-ixp42x-dlink-dsm-g600 + KERNEL := kernel-bin | append-dtb + IMAGES := kernel.bin rootfs.bin + IMAGE/kernel.bin := append-kernel + IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k +endef +TARGET_DEVICES += dlink_dsm_g600_a + define Device/freecom_fsg_3 DEVICE_VENDOR := Freecom DEVICE_MODEL := FSG-3