From: blogic Date: Mon, 2 May 2016 18:50:56 +0000 (+0000) Subject: ramips: Fix documentation for the rt3050 switch driver. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e716fce5dab5871f7be1e72e453eb14e2cb68993;p=openwrt%2Fstaging%2Fadrian.git ramips: Fix documentation for the rt3050 switch driver. The prefix used in the driver is now "mediatek" instead of "ralink". Signed-off-by: Vittorio Gambaletta SVN-Revision: 49288 --- diff --git a/target/linux/ramips/patches-4.4/0516-Documentation-DT-net-mediatek-fix-documentation-for-.patch b/target/linux/ramips/patches-4.4/0516-Documentation-DT-net-mediatek-fix-documentation-for-.patch new file mode 100644 index 0000000000..7aa4943e8e --- /dev/null +++ b/target/linux/ramips/patches-4.4/0516-Documentation-DT-net-mediatek-fix-documentation-for-.patch @@ -0,0 +1,23 @@ +From: Vittorio Gambaletta +Date: Fri, 01 Jan 2016 00:00:00 +0100 +Subject: [PATCH 1/3] Documentation: DT: net: mediatek: Fix documentation for the rt3050 switch driver. + +The prefix used in the driver is now "mediatek" instead of "ralink". + +Signed-off-by: Vittorio Gambaletta +--- + +--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt ++++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt +@@ -14,9 +14,9 @@ Required properties: + - reset-names: Should contain the reset names "esw" + + Optional properties: +-- ralink,portmap: can be used to choose if the default switch setup is ++- mediatek,portmap: can be used to choose if the default switch setup is + llllw or wllll +-- ralink,led_polarity: override the active high/low settings of the leds ++- mediatek,led_polarity: override the active high/low settings of the leds + + Example: +