From: Ivan T. Ivanov <iivanov@mm-sol.com>
Date: Mon, 28 Apr 2014 13:34:23 +0000 (+0300)
Subject: usb: phy: msm: Use usb_add_phy_dev() to register device
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e695abb3c8b1b758843a1db2a73c98b3d14c173a;p=openwrt%2Fstaging%2Fblogic.git

usb: phy: msm: Use usb_add_phy_dev() to register device

There could be more than one USB2.0 PHY's on the platform.
This will allow all of them to be registered successfully.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 8e7956eb8a77..9dc79180b934 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1663,6 +1663,7 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy->init = msm_phy_init;
 	phy->set_power = msm_otg_set_power;
 	phy->notify_disconnect = msm_phy_notify_disconnect;
+	phy->type = USB_PHY_TYPE_USB2;
 
 	phy->io_ops = &msm_otg_io_ops;
 
@@ -1672,7 +1673,7 @@ static int msm_otg_probe(struct platform_device *pdev)
 
 	msm_usb_reset(phy);
 
-	ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2);
+	ret = usb_add_phy_dev(&motg->phy);
 	if (ret) {
 		dev_err(&pdev->dev, "usb_add_phy failed\n");
 		goto disable_ldo;