From: David Santamaría Rogado Date: Wed, 27 Feb 2019 14:36:19 +0000 (+0100) Subject: ar71xx: Change led trigger from usbdev to usbport X-Git-Tag: v19.07.0-rc1~1172 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e65f935de9e67ea07a251f114455f12e9555c5bf;p=openwrt%2Fstaging%2Fhauke.git ar71xx: Change led trigger from usbdev to usbport This patch changes all the legacy usbdev leds triggers to the use usbport. The problem is that the usbdev triggers get applied as usbport in sysfs but LuCI gets confused and is not able to show the configuration with usbdev. More information can be found in the PR: Signed-off-by: David Santamaría Rogado Signed-off-by: Christian Lamparter [extended commit message] --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 183495e57f..edca185c62 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -122,8 +122,8 @@ archer-c25-v1) ;; archer-c5|\ archer-c7) - ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "2-1" + ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt" ;; @@ -140,7 +140,7 @@ archer-c60-v2) case "$board" in archer-c59-v1|\ archer-c59-v2) - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ;; esac ;; @@ -156,20 +156,20 @@ archer-c7-v5) case "$board" in archer-c7-v4) - ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1" + ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" ;; esac case "$board" in archer-c7-v5) - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ;; esac ;; arduino-yun) ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" - ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1" + ucidef_set_led_usbport "usb" "USB" "arduino:white:usb" "1-1-port1" ;; bhr-4grv2) ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1" @@ -281,10 +281,10 @@ cr3000) ;; cr5000) ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt" - ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1" + ucidef_set_led_usbport "usb" "USB" "pcs:white:wps" "usb1-port1" ;; db120) - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ;; dr344) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" @@ -295,8 +295,8 @@ dragino2) ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1" ;; dw33d) - ucidef_set_led_usbdev "mmc" "MMC" "$board:blue:mmc" "1-1" - ucidef_set_led_usbdev "usb" "USB" "$board:blue:usb" "2-1" + ucidef_set_led_usbport "mmc" "MMC" "$board:blue:mmc" "usb1-port1" + ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb2-port1" ucidef_set_led_netdev "internet" "INTERNET" "$board:blue:internet" "eth0" ucidef_set_led_wlan "wlan2g" "WLAN-2.4G" "$board:blue:wlan-2g" "phy1tpt" ;; @@ -312,7 +312,7 @@ ens202ext) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13" ;; f9k1115v2) - ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1" + ucidef_set_led_usbport "usb2" "USB2" "belkin:green:usb2" "usb1-port1" ;; fritz300e) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" @@ -355,7 +355,7 @@ dir-615-c1) ;; dir-825-b1|\ dir-825-c1) - ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "d-link:blue:usb" "usb1-port1" case "$board" in dir-825-c1) @@ -385,7 +385,7 @@ dlan-pro-1200-ac) ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0" ;; e1700ac-v2) - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" ;; e558-v2|\ @@ -454,7 +454,7 @@ hornet-ub-x2) ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt" - ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "alfa:blue:usb" "usb1-port1" ;; koala) ucidef_set_led_default "power" "POWER" "$board:green:power" "1" @@ -527,7 +527,7 @@ mynet-rext) ucidef_set_led_wlan "wlan" "WLAN" "wd:blue:wireless" "phy0tpt" ;; mzk-w04u) - ucidef_set_led_usbdev "usb" "USB" "planex:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "planex:green:usb" "usb1-port1" ;; mzk-w300nh) ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt" @@ -538,15 +538,15 @@ nbg460n_550n_550nh) nbg6616) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wifi2g" "phy1tpt" ucidef_set_led_wlan "wlan5" "WLAN5" "$board:green:wifi5g" "phy0tpt" - ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1" + ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" ;; nbg6716) ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wifi2g" "phy1tpt" ucidef_set_led_wlan "wlan5" "WLAN5" "$board:white:wifi5g" "phy0tpt" - ucidef_set_led_usbdev "usb1" "USB1" "$board:white:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "$board:white:usb2" "2-1" + ucidef_set_led_usbport "usb1" "USB1" "$board:white:usb1" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB2" "$board:white:usb2" "usb2-port1" ;; om2p|\ om2p-hs|\ @@ -600,7 +600,7 @@ qihoo-c301) ;; r36a) ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0" - ucidef_set_led_usbdev "usb" "USB" "$board:blue:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb1-port1" ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" ;; @@ -616,13 +616,13 @@ zbt-we1526) case "$board" in t830) - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ;; esac ;; r6100) ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0" - ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "netgear:blue:usb" "usb1-port1" ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt" ;; rb-750) @@ -744,7 +744,7 @@ som9331) ucidef_set_led_switch "lan1" "LAN1" "$board:orange:lan1" "switch0" "0x08" ucidef_set_led_switch "lan2" "LAN2" "$board:orange:lan2" "switch0" "0x02" ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_usbdev "usb" "USB" "$board:green:system" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:system" "usb1-port1" ;; sr3200) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" @@ -771,13 +771,13 @@ tl-mr11u|\ tl-mr3020|\ tl-mr3040|\ tl-mr3040-v2) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ;; tl-mr3220|\ tl-mr3420) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" ;; tl-mr3220-v2|\ tl-wr741nd-v4) @@ -790,7 +790,7 @@ tl-wr741nd-v4) case "$board" in tl-mr3220-v2) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" ;; esac ;; @@ -808,7 +808,7 @@ tl-wr941nd-v5) case "$board" in tl-mr3420-v2|\ tl-wr842n-v2) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" ;; esac ;; @@ -873,17 +873,17 @@ tl-wdr3320-v2) ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" ;; tl-wdr3500) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" ;; tl-wdr4300) - ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1.1" - ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "1-1.2" + ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "1-1-port1" + ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "1-1-port2" ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" ;; tl-wdr4900-v2) - ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "2-1" + ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt" ;; @@ -913,7 +913,7 @@ tl-wr842n-v3) case "$board" in tl-wr842n-v3) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" ;; esac ;; @@ -925,7 +925,7 @@ tl-wr802n-v2) ;; tl-wr902ac-v1) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" ;; tl-wr940n-v4|\ @@ -953,12 +953,12 @@ tl-wr942n-v1) ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1.2" - ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "1-1.1" + ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "1-1-port2" + ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "1-1-port1" ;; tl-wr1043nd|\ tl-wr1043nd-v2) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; tl-wr1043n-v5|\ @@ -972,13 +972,13 @@ tl-wr1043nd-v4) case "$board" in tl-wr1043nd-v4) - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" ;; esac ;; tl-wr2543n) ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" - ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" ;; tube2h) ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" @@ -997,7 +997,7 @@ wndap360) ;; wndr3700) ucidef_set_led_default "wan" "WAN LED (green)" "netgear:green:wan" "0" - ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" ;; wi2a-ac200i) ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1" @@ -1009,7 +1009,7 @@ wndr3700v4|\ wndr4300) ucidef_set_led_switch "wan-green" "WAN (green)" "netgear:green:wan" "switch0" "0x20" "0x08" ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20" "0x06" - ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt" ;; @@ -1049,7 +1049,7 @@ wnr2000-v4) ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x04" ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08" ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10" - ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1" + ucidef_set_led_usbport "usb" "USB" "netgear:amber:status" "usb1-port1" ;; wnr2200) ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" @@ -1063,7 +1063,7 @@ wnr2200) ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" ;; wnr612-v2) ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" @@ -1093,12 +1093,12 @@ wzr-hp-ag300h) ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "buffalo:amber:band2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "buffalo:amber:band5g" "phy1tpt" - ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "buffalo:green:usb" "usb1-port1" ;; wzr-hp-g300nh) ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1" - ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1" + ucidef_set_led_usbport "usb" "USB" "buffalo:blue:usb" "usb1-port1" ;; wzr-hp-g300nh2|\ wzr-hp-g450h)