From: Jo-Philipp Wich Date: Tue, 19 Jul 2016 22:13:15 +0000 (+0200) Subject: ar71xx: fix default network config of WZR-HP-G300NH and CR3000 X-Git-Tag: v17.01.0-rc1~2018 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e633a1b48f8504a17ea1d2d89ed760da03e41380;p=openwrt%2Fopenwrt.git ar71xx: fix default network config of WZR-HP-G300NH and CR3000 The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the lan interface to a vlan tagged device while the switch was set up in untagged mode, leading to broken lan side ethernet connectivity by default. Fix the issue by emitting untagged interfaces, consistent with the switch setting on the device. Signed-off-by: Jo-Philipp Wich --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 301304ac3b..7c4958a71f 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -258,13 +258,13 @@ wrt160nl) ;; wzr-hp-g300nh) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" + ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" ;; cr3000) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" + ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" ;;