From: David Bauer Date: Wed, 3 Mar 2021 09:23:00 +0000 (+0100) Subject: ath79: drop cs-gpios property X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e5f81ea3fe79ad484d454f5959814b3a1b094dcb;p=openwrt%2Fstaging%2Fynezz.git ath79: drop cs-gpios property The spi-ath79 driver performs the chipselect by writing to dedicated register in the SPI register block. So the GPIO numbers were not used. Tested-on: Enterasys WS-AP3705i Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi index 109ed0caf3..b8176dc059 100644 --- a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi +++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi @@ -219,7 +219,6 @@ &spi { status = "okay"; - cs-gpios = <0>, <0>; flash0: flash@0 { compatible = "jedec,spi-nor"; diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi index 98f6759eac..df28111598 100644 --- a/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi +++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi @@ -107,8 +107,6 @@ &spi { status = "okay"; - cs-gpios = <0>, <0>; - flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts index 7cb051a475..111d06491e 100644 --- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts +++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts @@ -163,8 +163,6 @@ &spi { status = "okay"; - cs-gpios = <0>, <0>; - flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts index 52becec18b..8f8276255a 100644 --- a/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts +++ b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts @@ -114,8 +114,6 @@ &spi { status = "okay"; - cs-gpios = <0>, <0>; - flash@0 { compatible = "jedec,spi-nor"; reg = <0>;