From: John Crispin Date: Mon, 17 Aug 2015 06:00:49 +0000 (+0000) Subject: ramips: fix Buffalo WMR-300 dts, board, image and profile names X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e4b6dcee5e7c67a11a417c04790ac22bb287aa58;p=openwrt%2Fstaging%2Fadrian.git ramips: fix Buffalo WMR-300 dts, board, image and profile names The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency). Signed-off-by: Piotr Dymacz SVN-Revision: 46628 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 0fab232aa9..334003d1ee 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -77,7 +77,7 @@ ramips_setup_interfaces() wizard8800 | \ wl-330n | \ - wmr300) + wmr-300) ucidef_set_interface_lan "eth0.1" ;; diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index e7499a8967..c8014bf20e 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -183,8 +183,8 @@ get_status_led() { whr-g300n) status_led="whr-g300n:green:router" ;; - wmr300) - status_led="buffalo:green:status" + wmr-300) + status_led="wmr-300:green:status" ;; wli-tx4-ag300n) status_led="buffalo:blue:power" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 9b37ce6854..98bd09455d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -320,7 +320,7 @@ ramips_board_detect() { name="w502u" ;; *"WMR-300") - name="wmr300" + name="wmr-300" ;; *"WHR-300HP2") name="whr-300hp2" diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 7249005594..e347d6f021 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -112,7 +112,7 @@ platform_check_image() { wl-341v3 | \ wli-tx4-ag300n | \ wzr-agl300nh | \ - wmr300 |\ + wmr-300 |\ wnce2001 | \ wr512-3gn |\ wr6202 |\ diff --git a/target/linux/ramips/dts/WMR-300.dts b/target/linux/ramips/dts/WMR-300.dts new file mode 100644 index 0000000000..3dae3ae2ae --- /dev/null +++ b/target/linux/ramips/dts/WMR-300.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = "buffalo,wmr-300", "ralink,mt7620n-soc"; + model = "Buffalo WMR-300"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "wllll"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "ephy"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + aoss1 { + label = "wmr-300:red:aoss"; + gpios = <&gpio2 1 1>; + }; + + aoss2 { + label = "wmr-300:green:aoss"; + gpios = <&gpio2 2 1>; + }; + + power { + label = "wmr-300:green:status"; + gpios = <&gpio2 4 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + + aoss { + label = "aoss"; + gpios = <&gpio0 2 1>; + linux,code = <0x211>; + }; + }; +}; diff --git a/target/linux/ramips/dts/WMR300.dts b/target/linux/ramips/dts/WMR300.dts deleted file mode 100644 index fbeec4c769..0000000000 --- a/target/linux/ramips/dts/WMR300.dts +++ /dev/null @@ -1,106 +0,0 @@ -/dts-v1/; - -/include/ "mt7620n.dtsi" - -/ { - compatible = "buffalo,wmr-300", "ralink,mt7620n-soc"; - model = "Buffalo WMR-300"; - - palmbus@10000000 { - gpio2: gpio@660 { - status = "okay"; - }; - - spi@b00 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0 0>; - linux,modalias = "m25p80", "en25q64"; - spi-max-frequency = <10000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; - }; - - ethernet@10100000 { - mtd-mac-address = <&factory 0x4>; - ralink,port-map = "wllll"; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "ephy"; - ralink,function = "gpio"; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - aoss1 { - label = "buffalo:red:aoss"; - gpios = <&gpio2 1 1>; - }; - - aoss2 { - label = "buffalo:green:aoss"; - gpios = <&gpio2 2 1>; - }; - - power { - label = "buffalo:green:status"; - gpios = <&gpio2 4 1>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 1>; - linux,code = <0x198>; - }; - - aoss { - label = "aoss"; - gpios = <&gpio0 2 1>; - linux,code = <0x211>; - }; - }; -}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index f3f40eb790..2539b5a29d 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -874,7 +874,7 @@ Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1) Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),y1s,Y1S) Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221) Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2) -Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300) +Image/Build/Profile/WMR-300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR-300) Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) @@ -908,7 +908,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/Y1S,$(1)) $(call Image/Build/Profile/MLW221,$(1)) $(call Image/Build/Profile/MLWG2,$(1)) - $(call Image/Build/Profile/WMR300,$(1)) + $(call Image/Build/Profile/WMR-300,$(1)) $(call Image/Build/Profile/RT-N14U,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/WT3020,$(1))