From: Luka Perkov <luka@openwrt.org>
Date: Mon, 11 Aug 2014 20:35:04 +0000 (+0000)
Subject: imx6: kernel: fix occasional link failure
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e47c4d7014d26c33aaa7522f06b4db4581d54703;p=openwrt%2Fstaging%2Fdangole.git

imx6: kernel: fix occasional link failure

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42145
---

diff --git a/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch b/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
new file mode 100644
index 0000000000..e416d8332d
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/0060-pci_imx6_fix-link-failure.patch
@@ -0,0 +1,38 @@
+PCI: imx6: fix occasional link failure
+
+According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable
+for SS function) must remain deasserted until the reference clock is running
+at the appropriate frequency.
+
+Without this patch we find a high link failure rate (>5%) on certain
+IMX6 boards at various temperatures.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -262,11 +262,6 @@ static int imx6_pcie_deassert_core_reset
+ 	if (gpio_is_valid(imx6_pcie->power_on_gpio))
+ 		gpio_set_value(imx6_pcie->power_on_gpio, 1);
+ 
+-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+-			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+-			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+-
+ 	ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
+ 	if (ret) {
+ 		dev_err(pp->dev, "unable to enable sata_ref_100m\n");
+@@ -294,6 +289,12 @@ static int imx6_pcie_deassert_core_reset
+ 	/* allow the clocks to stabilize */
+ 	usleep_range(200, 500);
+ 
++	/* power up core phy and enable ref clock */
++	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
++			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
++	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
++			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
++
+ 	/* Some boards don't have PCIe reset GPIO. */
+ 	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+ 		gpio_set_value(imx6_pcie->reset_gpio, 0);