From: Chukun Pan Date: Sat, 16 Oct 2021 10:02:40 +0000 (+0800) Subject: uboot-sunxi: add support for FriendlyARM NanoPi R1S H5 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e43eb16efe97a597a2ebaa9f549d1daec2c8c2ab;p=openwrt%2Fstaging%2Fjogo.git uboot-sunxi: add support for FriendlyARM NanoPi R1S H5 Merged in https://github.com/u-boot/u-boot/commit/e7510d2, adjust back to the current 2020.04 version. Signed-off-by: Chukun Pan --- diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 9dce3e448a..5c27407d15 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -270,6 +270,15 @@ define U-Boot/nanopi_neo2 ATF:=a64 endef +define U-Boot/nanopi_r1s_h5 + BUILD_SUBTARGET:=cortexa53 + NAME:=NanoPi R1S (H5) + BUILD_DEVICES:=friendlyarm_nanopi-r1s-h5 + DEPENDS:=+PACKAGE_u-boot-nanopi_r1s_h5:arm-trusted-firmware-sunxi-a64 + UENV:=a64 + ATF:=a64 +endef + define U-Boot/pine64_plus BUILD_SUBTARGET:=cortexa53 NAME:=Pine64 Plus A64 @@ -357,6 +366,7 @@ UBOOT_TARGETS := \ nanopi_neo_plus2 \ nanopi_neo2 \ nanopi_r1 \ + nanopi_r1s_h5 \ orangepi_zero \ orangepi_r1 \ orangepi_one \ diff --git a/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch new file mode 100644 index 0000000000..b89351d2e9 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch @@ -0,0 +1,271 @@ +From e7510d24cab4741f72489b9d67c2d42b18fe5374 Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Sun, 10 Oct 2021 21:36:57 +0800 +Subject: [PATCH] sunxi: Add support for FriendlyARM NanoPi R1S H5 + +This adds support for the NanoPi R1S H5 board. + +Allwinner H5 SoC +512MB DDR3 RAM +10/100/1000M Ethernet x 2 +RTL8189ETV WiFi 802.11b/g/n +USB 2.0 host port (A) +MicroSD Slot +Reset button +Serial Debug Port +WAN - LAN - SYS LED + +Signed-off-by: Chukun Pan +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 195 +++++++++++++++++++++++ + board/sunxi/MAINTAINERS | 5 + + configs/nanopi_r1s_h5_defconfig | 14 ++ + 4 files changed, 215 insertions(+) + create mode 100644 arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts + create mode 100644 configs/nanopi_r1s_h5_defconfig + +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index b8a382d1539..ed3d360bb10 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -638,6 +638,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ + sun50i-h5-libretech-all-h5-cc.dtb \ + sun50i-h5-nanopi-neo2.dtb \ + sun50i-h5-nanopi-neo-plus2.dtb \ ++ sun50i-h5-nanopi-r1s-h5.dtb \ + sun50i-h5-orangepi-zero-plus.dtb \ + sun50i-h5-orangepi-pc2.dtb \ + sun50i-h5-orangepi-prime.dtb \ +diff --git a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts +new file mode 100644 +index 00000000000..55bcdf8d1a0 +--- /dev/null ++++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts +@@ -0,0 +1,190 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2021 Chukun Pan ++ * ++ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is: ++ * Copyright (C) 2017 Antony Antony ++ * Copyright (C) 2016 ARM Ltd. ++ */ ++ ++/dts-v1/; ++#include "sun50i-h5.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "FriendlyARM NanoPi R1S H5"; ++ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; ++ ++ aliases { ++ ethernet0 = &emac; ++ ethernet1 = &rtl8189etv; ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ sys { ++ label = "nanopi:red:sys"; ++ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ lan { ++ label = "nanopi:green:lan"; ++ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan { ++ label = "nanopi:green:wan"; ++ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ r-gpio-keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ reg_usb0_vbus: usb0-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb0-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ ++ status = "okay"; ++ }; ++ ++ vdd_cpux: gpio-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; ++ gpios-states = <0x1>; ++ states = <1100000 0x0>, <1300000 0x1>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ post-power-on-delay-ms = <200>; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpux>; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii-id"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ eeprom@51 { ++ compatible = "microchip,24c02"; ++ reg = <0x51>; ++ pagesize = <16>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8189etv: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pa_pins>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB Type-A port's VBUS is always on */ ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ usb0_vbus-supply = <®_usb0_vbus>; ++ status = "okay"; ++}; +diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS +index 2543c94de79..56a0ee3689b 100644 +--- a/board/sunxi/MAINTAINERS ++++ b/board/sunxi/MAINTAINERS +@@ -358,6 +358,11 @@ M: Jelle van der Waa + S: Maintained + F: configs/nanopi_neo_air_defconfig + ++NANOPI-R1S-H5 BOARD ++M: Chukun Pan ++S: Maintained ++F: configs/nanopi_r1s_h5_defconfig ++ + NANOPI-A64 BOARD + M: Jagan Teki + S: Maintained +diff --git a/configs/nanopi_r1s_h5_defconfig b/configs/nanopi_r1s_h5_defconfig +new file mode 100644 +index 00000000000..27cf172d72a +--- /dev/null ++++ b/configs/nanopi_r1s_h5_defconfig +@@ -0,0 +1,14 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I_H5=y ++CONFIG_DRAM_CLK=672 ++CONFIG_DRAM_ZQ=3881977 ++# CONFIG_DRAM_ODT_EN is not set ++CONFIG_MACPWR="PD6" ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5" ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_OHCI_HCD=y