From: Christian Lamparter Date: Sun, 7 Jan 2018 20:27:49 +0000 (+0100) Subject: apm821xx: convert MR24 to use DT PHY defintion X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e4371779d2691553e6321e87d86212beaaa8b89d;p=openwrt%2Fstaging%2Fnbd.git apm821xx: convert MR24 to use DT PHY defintion Convert the MR24 to use the DT phy probing and at803x PHY driver. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/dts/meraki-mr24.dts b/target/linux/apm821xx/dts/meraki-mr24.dts index 2c2f8d281b..e06d37cbbd 100644 --- a/target/linux/apm821xx/dts/meraki-mr24.dts +++ b/target/linux/apm821xx/dts/meraki-mr24.dts @@ -89,6 +89,18 @@ &EMAC0 { status = "okay"; + + phy-mode = "rgmii-id"; + phy-map = <0x2>; + phy-address = <0x1>; + phy-handle = <&phy>; + + mdio { + phy: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; }; &POB0 { diff --git a/target/linux/apm821xx/nand/config-default b/target/linux/apm821xx/nand/config-default index 783305a850..ca6af461c7 100644 --- a/target/linux/apm821xx/nand/config-default +++ b/target/linux/apm821xx/nand/config-default @@ -1,3 +1,4 @@ +CONFIG_AT803X_PHY=y CONFIG_AR8216_PHY=y CONFIG_DMADEVICES=y CONFIG_DMA_ENGINE=y diff --git a/target/linux/apm821xx/patches-4.14/030-0001-net-ibm-emac-replace-custom-rgmii_mode_name-with-phy.patch b/target/linux/apm821xx/patches-4.14/030-0001-net-ibm-emac-replace-custom-rgmii_mode_name-with-phy.patch new file mode 100644 index 0000000000..28969a7b4a --- /dev/null +++ b/target/linux/apm821xx/patches-4.14/030-0001-net-ibm-emac-replace-custom-rgmii_mode_name-with-phy.patch @@ -0,0 +1,51 @@ +From 54e1b3004eb85f9317f6c4ceff2e097231c7f52a Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Wed, 20 Dec 2017 22:11:22 +0100 +Subject: [PATCH 1/3] net: ibm: emac: replace custom rgmii_mode_name with + phy_modes + +The common phylib defines the same names (in lower-case). +Since rgmii_mode_name() is used only in one place and +for a "notice-level" printk, I think it can be replaced. + +Signed-off-by: Christian Lamparter +--- + drivers/net/ethernet/ibm/emac/rgmii.c | 20 +------------------- + 1 file changed, 1 insertion(+), 19 deletions(-) + +--- a/drivers/net/ethernet/ibm/emac/rgmii.c ++++ b/drivers/net/ethernet/ibm/emac/rgmii.c +@@ -59,24 +59,6 @@ static inline int rgmii_valid_mode(int p + phy_mode == PHY_MODE_RTBI; + } + +-static inline const char *rgmii_mode_name(int mode) +-{ +- switch (mode) { +- case PHY_MODE_RGMII: +- return "RGMII"; +- case PHY_MODE_TBI: +- return "TBI"; +- case PHY_MODE_GMII: +- return "GMII"; +- case PHY_MODE_MII: +- return "MII"; +- case PHY_MODE_RTBI: +- return "RTBI"; +- default: +- BUG(); +- } +-} +- + static inline u32 rgmii_mode_mask(int mode, int input) + { + switch (mode) { +@@ -115,7 +97,7 @@ int rgmii_attach(struct platform_device + out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); + + printk(KERN_NOTICE "%pOF: input %d in %s mode\n", +- ofdev->dev.of_node, input, rgmii_mode_name(mode)); ++ ofdev->dev.of_node, input, phy_modes(mode)); + + ++dev->users; + diff --git a/target/linux/apm821xx/patches-4.14/030-0002-net-ibm-emac-replace-custom-PHY_MODE_-macros.patch b/target/linux/apm821xx/patches-4.14/030-0002-net-ibm-emac-replace-custom-PHY_MODE_-macros.patch new file mode 100644 index 0000000000..e4a722646e --- /dev/null +++ b/target/linux/apm821xx/patches-4.14/030-0002-net-ibm-emac-replace-custom-PHY_MODE_-macros.patch @@ -0,0 +1,246 @@ +From 1477bea9e6931f6be96f45b9d277690a26d0cd97 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Wed, 20 Dec 2017 22:19:24 +0100 +Subject: [PATCH 2/3] net: ibm: emac: replace custom PHY_MODE_* macros + +The ibm_emac driver predates the shared PHY_INTERFACE_MODE_ +enums provided by include/linux/phy.h by a few years. + +And while the driver has been retrofitted to use the PHYLIB, +the old definitions have stuck around to this day. + +Signed-off-by: Christian Lamparter +--- + drivers/net/ethernet/ibm/emac/core.c | 20 ++++++++++---------- + drivers/net/ethernet/ibm/emac/emac.h | 13 ------------- + drivers/net/ethernet/ibm/emac/phy.c | 10 +++++----- + drivers/net/ethernet/ibm/emac/rgmii.c | 20 ++++++++++---------- + drivers/net/ethernet/ibm/emac/zmii.c | 34 +++++++++++++++++----------------- + 5 files changed, 42 insertions(+), 55 deletions(-) + +--- a/drivers/net/ethernet/ibm/emac/core.c ++++ b/drivers/net/ethernet/ibm/emac/core.c +@@ -199,18 +199,18 @@ static void __emac_set_multicast_list(st + + static inline int emac_phy_supports_gige(int phy_mode) + { +- return phy_mode == PHY_MODE_GMII || +- phy_mode == PHY_MODE_RGMII || +- phy_mode == PHY_MODE_SGMII || +- phy_mode == PHY_MODE_TBI || +- phy_mode == PHY_MODE_RTBI; ++ return phy_mode == PHY_INTERFACE_MODE_GMII || ++ phy_mode == PHY_INTERFACE_MODE_RGMII || ++ phy_mode == PHY_INTERFACE_MODE_SGMII || ++ phy_mode == PHY_INTERFACE_MODE_TBI || ++ phy_mode == PHY_INTERFACE_MODE_RTBI; + } + + static inline int emac_phy_gpcs(int phy_mode) + { +- return phy_mode == PHY_MODE_SGMII || +- phy_mode == PHY_MODE_TBI || +- phy_mode == PHY_MODE_RTBI; ++ return phy_mode == PHY_INTERFACE_MODE_SGMII || ++ phy_mode == PHY_INTERFACE_MODE_TBI || ++ phy_mode == PHY_INTERFACE_MODE_RTBI; + } + + static inline void emac_tx_enable(struct emac_instance *dev) +@@ -2865,7 +2865,7 @@ static int emac_init_config(struct emac_ + /* PHY mode needs some decoding */ + dev->phy_mode = of_get_phy_mode(np); + if (dev->phy_mode < 0) +- dev->phy_mode = PHY_MODE_NA; ++ dev->phy_mode = PHY_INTERFACE_MODE_NA; + + /* Check EMAC version */ + if (of_device_is_compatible(np, "ibm,emac4sync")) { +@@ -3168,7 +3168,7 @@ static int emac_probe(struct platform_de + printk(KERN_INFO "%s: EMAC-%d %pOF, MAC %pM\n", + ndev->name, dev->cell_index, np, ndev->dev_addr); + +- if (dev->phy_mode == PHY_MODE_SGMII) ++ if (dev->phy_mode == PHY_INTERFACE_MODE_SGMII) + printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name); + + if (dev->phy.address >= 0) +--- a/drivers/net/ethernet/ibm/emac/emac.h ++++ b/drivers/net/ethernet/ibm/emac/emac.h +@@ -104,19 +104,6 @@ struct emac_regs { + } u1; + }; + +-/* +- * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY) +- */ +-#define PHY_MODE_NA PHY_INTERFACE_MODE_NA +-#define PHY_MODE_MII PHY_INTERFACE_MODE_MII +-#define PHY_MODE_RMII PHY_INTERFACE_MODE_RMII +-#define PHY_MODE_SMII PHY_INTERFACE_MODE_SMII +-#define PHY_MODE_RGMII PHY_INTERFACE_MODE_RGMII +-#define PHY_MODE_TBI PHY_INTERFACE_MODE_TBI +-#define PHY_MODE_GMII PHY_INTERFACE_MODE_GMII +-#define PHY_MODE_RTBI PHY_INTERFACE_MODE_RTBI +-#define PHY_MODE_SGMII PHY_INTERFACE_MODE_SGMII +- + /* EMACx_MR0 */ + #define EMAC_MR0_RXI 0x80000000 + #define EMAC_MR0_TXI 0x40000000 +--- a/drivers/net/ethernet/ibm/emac/phy.c ++++ b/drivers/net/ethernet/ibm/emac/phy.c +@@ -96,7 +96,7 @@ int emac_mii_reset_gpcs(struct mii_phy * + if ((val & BMCR_ISOLATE) && limit > 0) + gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); + +- if (limit > 0 && phy->mode == PHY_MODE_SGMII) { ++ if (limit > 0 && phy->mode == PHY_INTERFACE_MODE_SGMII) { + /* Configure GPCS interface to recommended setting for SGMII */ + gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */ + gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */ +@@ -313,16 +313,16 @@ static int cis8201_init(struct mii_phy * + epcr &= ~EPCR_MODE_MASK; + + switch (phy->mode) { +- case PHY_MODE_TBI: ++ case PHY_INTERFACE_MODE_TBI: + epcr |= EPCR_TBI_MODE; + break; +- case PHY_MODE_RTBI: ++ case PHY_INTERFACE_MODE_RTBI: + epcr |= EPCR_RTBI_MODE; + break; +- case PHY_MODE_GMII: ++ case PHY_INTERFACE_MODE_GMII: + epcr |= EPCR_GMII_MODE; + break; +- case PHY_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII: + default: + epcr |= EPCR_RGMII_MODE; + } +--- a/drivers/net/ethernet/ibm/emac/rgmii.c ++++ b/drivers/net/ethernet/ibm/emac/rgmii.c +@@ -52,25 +52,25 @@ + /* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ + static inline int rgmii_valid_mode(int phy_mode) + { +- return phy_mode == PHY_MODE_GMII || +- phy_mode == PHY_MODE_MII || +- phy_mode == PHY_MODE_RGMII || +- phy_mode == PHY_MODE_TBI || +- phy_mode == PHY_MODE_RTBI; ++ return phy_mode == PHY_INTERFACE_MODE_GMII || ++ phy_mode == PHY_INTERFACE_MODE_MII || ++ phy_mode == PHY_INTERFACE_MODE_RGMII || ++ phy_mode == PHY_INTERFACE_MODE_TBI || ++ phy_mode == PHY_INTERFACE_MODE_RTBI; + } + + static inline u32 rgmii_mode_mask(int mode, int input) + { + switch (mode) { +- case PHY_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII: + return RGMII_FER_RGMII(input); +- case PHY_MODE_TBI: ++ case PHY_INTERFACE_MODE_TBI: + return RGMII_FER_TBI(input); +- case PHY_MODE_GMII: ++ case PHY_INTERFACE_MODE_GMII: + return RGMII_FER_GMII(input); +- case PHY_MODE_MII: ++ case PHY_INTERFACE_MODE_MII: + return RGMII_FER_MII(input); +- case PHY_MODE_RTBI: ++ case PHY_INTERFACE_MODE_RTBI: + return RGMII_FER_RTBI(input); + default: + BUG(); +--- a/drivers/net/ethernet/ibm/emac/zmii.c ++++ b/drivers/net/ethernet/ibm/emac/zmii.c +@@ -49,20 +49,20 @@ + */ + static inline int zmii_valid_mode(int mode) + { +- return mode == PHY_MODE_MII || +- mode == PHY_MODE_RMII || +- mode == PHY_MODE_SMII || +- mode == PHY_MODE_NA; ++ return mode == PHY_INTERFACE_MODE_MII || ++ mode == PHY_INTERFACE_MODE_RMII || ++ mode == PHY_INTERFACE_MODE_SMII || ++ mode == PHY_INTERFACE_MODE_NA; + } + + static inline const char *zmii_mode_name(int mode) + { + switch (mode) { +- case PHY_MODE_MII: ++ case PHY_INTERFACE_MODE_MII: + return "MII"; +- case PHY_MODE_RMII: ++ case PHY_INTERFACE_MODE_RMII: + return "RMII"; +- case PHY_MODE_SMII: ++ case PHY_INTERFACE_MODE_SMII: + return "SMII"; + default: + BUG(); +@@ -72,11 +72,11 @@ static inline const char *zmii_mode_name + static inline u32 zmii_mode_mask(int mode, int input) + { + switch (mode) { +- case PHY_MODE_MII: ++ case PHY_INTERFACE_MODE_MII: + return ZMII_FER_MII(input); +- case PHY_MODE_RMII: ++ case PHY_INTERFACE_MODE_RMII: + return ZMII_FER_RMII(input); +- case PHY_MODE_SMII: ++ case PHY_INTERFACE_MODE_SMII: + return ZMII_FER_SMII(input); + default: + return 0; +@@ -106,18 +106,18 @@ int zmii_attach(struct platform_device * + * Please, always specify PHY mode in your board port to avoid + * any surprises. + */ +- if (dev->mode == PHY_MODE_NA) { +- if (*mode == PHY_MODE_NA) { ++ if (dev->mode == PHY_INTERFACE_MODE_NA) { ++ if (*mode == PHY_INTERFACE_MODE_NA) { + u32 r = dev->fer_save; + + ZMII_DBG(dev, "autodetecting mode, FER = 0x%08x" NL, r); + + if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) +- dev->mode = PHY_MODE_MII; ++ dev->mode = PHY_INTERFACE_MODE_MII; + else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) +- dev->mode = PHY_MODE_RMII; ++ dev->mode = PHY_INTERFACE_MODE_RMII; + else +- dev->mode = PHY_MODE_SMII; ++ dev->mode = PHY_INTERFACE_MODE_SMII; + } else + dev->mode = *mode; + +@@ -126,7 +126,7 @@ int zmii_attach(struct platform_device * + zmii_mode_name(dev->mode)); + } else { + /* All inputs must use the same mode */ +- if (*mode != PHY_MODE_NA && *mode != dev->mode) { ++ if (*mode != PHY_INTERFACE_MODE_NA && *mode != dev->mode) { + printk(KERN_ERR + "%pOF: invalid mode %d specified for input %d\n", + ofdev->dev.of_node, *mode, input); +@@ -246,7 +246,7 @@ static int zmii_probe(struct platform_de + + mutex_init(&dev->lock); + dev->ofdev = ofdev; +- dev->mode = PHY_MODE_NA; ++ dev->mode = PHY_INTERFACE_MODE_NA; + + rc = -ENXIO; + if (of_address_to_resource(np, 0, ®s)) { diff --git a/target/linux/apm821xx/patches-4.14/030-0003-net-ibm-emac-support-RGMII-RX-TX-ID-phymode.patch b/target/linux/apm821xx/patches-4.14/030-0003-net-ibm-emac-support-RGMII-RX-TX-ID-phymode.patch new file mode 100644 index 0000000000..16074c7ee6 --- /dev/null +++ b/target/linux/apm821xx/patches-4.14/030-0003-net-ibm-emac-support-RGMII-RX-TX-ID-phymode.patch @@ -0,0 +1,59 @@ +From 0a49f0d1958440f7928047433c983eece05a3723 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Thu, 14 Dec 2017 19:51:50 +0100 +Subject: [PATCH 3/3] net: ibm: emac: support RGMII-[RX|TX]ID phymode + +The RGMII spec allows compliance for devices that implement an internal +delay on TXC and/or RXC inside the transmitter. This patch adds the +necessary RGMII_[RX|TX]ID mode code to handle such PHYs with the +emac driver. + +Signed-off-by: Christian Lamparter + +--- +v3: - replace PHY_MODE_* with PHY_INTERFACE_MODE_* + - replace rgmii_mode_name() with phy_modes[] + +v2: - utilize phy_interface_mode_is_rgmii() +--- + drivers/net/ethernet/ibm/emac/core.c | 4 ++-- + drivers/net/ethernet/ibm/emac/rgmii.c | 7 +++++-- + 2 files changed, 7 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/ibm/emac/core.c ++++ b/drivers/net/ethernet/ibm/emac/core.c +@@ -199,8 +199,8 @@ static void __emac_set_multicast_list(st + + static inline int emac_phy_supports_gige(int phy_mode) + { +- return phy_mode == PHY_INTERFACE_MODE_GMII || +- phy_mode == PHY_INTERFACE_MODE_RGMII || ++ return phy_interface_mode_is_rgmii(phy_mode) || ++ phy_mode == PHY_INTERFACE_MODE_GMII || + phy_mode == PHY_INTERFACE_MODE_SGMII || + phy_mode == PHY_INTERFACE_MODE_TBI || + phy_mode == PHY_INTERFACE_MODE_RTBI; +--- a/drivers/net/ethernet/ibm/emac/rgmii.c ++++ b/drivers/net/ethernet/ibm/emac/rgmii.c +@@ -52,9 +52,9 @@ + /* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ + static inline int rgmii_valid_mode(int phy_mode) + { +- return phy_mode == PHY_INTERFACE_MODE_GMII || ++ return phy_interface_mode_is_rgmii(phy_mode) || ++ phy_mode == PHY_INTERFACE_MODE_GMII || + phy_mode == PHY_INTERFACE_MODE_MII || +- phy_mode == PHY_INTERFACE_MODE_RGMII || + phy_mode == PHY_INTERFACE_MODE_TBI || + phy_mode == PHY_INTERFACE_MODE_RTBI; + } +@@ -63,6 +63,9 @@ static inline u32 rgmii_mode_mask(int mo + { + switch (mode) { + case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_RGMII_TXID: + return RGMII_FER_RGMII(input); + case PHY_INTERFACE_MODE_TBI: + return RGMII_FER_TBI(input);