From: Lech Perczak <lech.perczak@gmail.com>
Date: Sun, 21 Jan 2024 23:14:16 +0000 (+0100)
Subject: ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e405b96fe774fbad9c4c465f41ad853a970439bf;p=openwrt%2Fstaging%2Fsvanheule.git

ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic

Since commit 6f2e1b7485f0 ("ath79: disable delays on AT803X config init")
Ubiquiti XW boards equipped with AR8035 PHY suffered from lack of
outbound traffic on the Ethernet port. This was caused by the fact, the
U-boot has set this during boot and it wasn't reset by the PHY driver,
and the corresponding setting in device tree was wrong.

Set the 'phy-mode = "rgmii-txid"' at the &eth0, and drop this property
from PHY node, as it is not parsed there. This causes the device to
connect using Ethernet once again.

Fixes: db4b6535f837 ("ath79: Add support for Ubiquity Bullet M (XW)")
Fixes: 6f2e1b7485f0 ("ath79: disable delays on AT803X config init")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---

diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
index 16d27dc016..ee73428625 100644
--- a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
@@ -11,7 +11,6 @@
 	status = "okay";
 
 	phy4: ethernet-phy@4 {
-		phy-mode = "rgmii";
 		reg = <4>;
 		max-speed = <100>;
 	};
@@ -20,7 +19,7 @@
 &eth0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	phy-handle = <&phy4>;
 
 	gmac-config {