From: Thibaut VARENE Date: Mon, 6 Mar 2017 22:06:13 +0000 (+0100) Subject: ar71xx: add support for RB LHG 5nD X-Git-Tag: v18.06.0-rc1~3339 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e3dc036cbf53bb4c2538b619f986cc3cd2aabc87;p=openwrt%2Fopenwrt.git ar71xx: add support for RB LHG 5nD This patch adds support for the MikroTik RouterBOARD LHG 5 https://routerboard.com/RBLHG-5nD Specifications: - SoC: Atheros AR9344 (600MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin AR9344 5GHz, 2x2:2 - Ethernet: 1x100M Initial flash via initramfs, like all other RB devices. Signed-off-by: Thibaut VARENE --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 32d49318e6..686ae31b75 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -259,6 +259,15 @@ rb-2011uias-2hnd) ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" ;; +rb-lhg-5nd) + ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "rb:green:rssi0" "wlan0" "1" "100" "0" "13" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "rb:green:rssi1" "wlan0" "20" "100" "-19" "13" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "rb:green:rssi2" "wlan0" "40" "100" "-39" "13" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "rb:green:rssi3" "wlan0" "60" "100" "-59" "13" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "rb:green:rssi4" "wlan0" "80" "100" "-79" "13" + ;; rb-mapl-2nd) ucidef_set_led_default "power" "POWER" "rb:green:power" "1" ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index a55e50affb..20b34e8965 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -90,6 +90,7 @@ ar71xx_setup_interfaces() rb-911g-5hpnd|\ rb-912uag-2hpnd|\ rb-912uag-5hpnd|\ + rb-lhg-5nd|\ rb-mapl-2nd|\ rb-sxt2n|\ rb-sxt5n|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 461d0daf4b..0c4349ff2b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -306,6 +306,7 @@ get_status_led() { rb-912uag-5hpnd|\ rb-941-2nd|\ rb-951ui-2nd|\ + rb-lhg-5nd|\ rb-mapl-2nd) status_led="rb:green:user" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 8c87737928..4951e5b625 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -905,6 +905,9 @@ ar71xx_board_detect() { *"RouterBOARD 951Ui-2nD") name="rb-951ui-2nd" ;; + *"RouterBOARD LHG 5nD") + name="rb-lhg-5nd" + ;; *"RouterBOARD mAP L-2nD") name="rb-mapl-2nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f89ad2cda9..364a32f76c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -638,6 +638,7 @@ platform_check_image() { rb-750up-r2|\ rb-941-2nd|\ rb-951ui-2nd|\ + rb-lhg-5nd|\ rb-mapl-2nd) return 0 ;; @@ -689,6 +690,7 @@ platform_pre_upgrade() { rb-750up-r2|\ rb-941-2nd|\ rb-951ui-2nd|\ + rb-lhg-5nd|\ rb-mapl-2nd) # erase firmware if booted from initramfs [ -z "$(rootfs_type)" ] && mtd erase firmware diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 72f3591bbe..1bf00bd850 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -928,6 +928,7 @@ config ATH79_MACH_RB2011 config ATH79_MACH_RBSPI bool "MikroTik RouterBOARD SPI-NOR support" + select SOC_AR934X select SOC_QCA953X select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS @@ -943,6 +944,7 @@ config ATH79_MACH_RBSPI MikroTik RouterBOARD hAP MikroTik RouterBOARD hEX PoE lite MikroTik RouterBOARD hEX lite + MikroTik RouterBOARD LHG 5 MikroTik RouterBOARD cAP (EXPERIMENTAL) MikroTik RouterBOARD mAP (EXPERIMENTAL) MikroTik RouterBOARD wAP (EXPERIMENTAL) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index aeeeca6243..b26b1ae46e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -6,6 +6,7 @@ * - MikroTik RouterBOARD 951Ui-2nD * - MikroTik RouterBOARD 750UP r2 * - MikroTik RouterBOARD 750 r2 + * - MikroTik RouterBOARD LHG 5nD * * Preliminary support for the following hardware * - MikroTik RouterBOARD wAP2nD @@ -52,10 +53,12 @@ #define RBSPI_KEYS_DEBOUNCE_INTERVAL (3 * RBSPI_KEYS_POLL_INTERVAL) #define RBSPI_HAS_USB BIT(0) -#define RBSPI_HAS_WLAN BIT(1) -#define RBSPI_HAS_WAN4 BIT(2) /* has WAN port on PHY4 */ -#define RBSPI_HAS_SSR BIT(3) /* has an SSR on SPI bus 0 */ -#define RBSPI_HAS_POE BIT(4) +#define RBSPI_HAS_WLAN0 BIT(1) +#define RBSPI_HAS_WLAN1 BIT(2) +#define RBSPI_HAS_WAN4 BIT(3) /* has WAN port on PHY4 */ +#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */ +#define RBSPI_HAS_POE BIT(5) +#define RBSPI_HAS_MDIO1 BIT(6) #define RB_ROUTERBOOT_OFFSET 0x0000 #define RB_BIOS_SIZE 0x1000 @@ -324,6 +327,65 @@ static struct gpio_led rbmap_leds[] __initdata = { }, }; +/* RB LHG 5nD gpios */ +#define RBLHG_GPIO_LED_0 13 +#define RBLHG_GPIO_LED_1 12 +#define RBLHG_GPIO_LED_2 4 +#define RBLHG_GPIO_LED_3 21 +#define RBLHG_GPIO_LED_4 18 +#define RBLHG_GPIO_LED_ETH 14 +#define RBLHG_GPIO_LED_POWER 11 +#define RBLHG_GPIO_LED_USER 20 +#define RBLHG_GPIO_BTN_RESET 15 + +static struct gpio_led rblhg_leds[] __initdata = { + { + .name = "rb:green:rssi0", + .gpio = RBLHG_GPIO_LED_0, + .active_low = 1, + }, { + .name = "rb:green:rssi1", + .gpio = RBLHG_GPIO_LED_1, + .active_low = 1, + }, { + .name = "rb:green:rssi2", + .gpio = RBLHG_GPIO_LED_2, + .active_low = 1, + }, { + .name = "rb:green:rssi3", + .gpio = RBLHG_GPIO_LED_3, + .active_low = 1, + }, { + .name = "rb:green:rssi4", + .gpio = RBLHG_GPIO_LED_4, + .active_low = 1, + }, { + .name = "rb:green:eth", + .gpio = RBLHG_GPIO_LED_ETH, + .active_low = 1, + }, { + .name = "rb:green:user", + .gpio = RBLHG_GPIO_LED_USER, + .active_low = 1, + }, { + .name = "rb:blue:power", + .gpio = RBLHG_GPIO_LED_POWER, + .active_low = 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static struct gpio_keys_button rblhg_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, + .gpio = RBLHG_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + static struct gen_74x164_chip_platform_data rbspi_ssr_data = { .base = RBSPI_SSR_GPIO_BASE, @@ -360,12 +422,12 @@ static struct spi_board_info rbspi_spi_info[] = { } }; -void __init rbspi_wlan_init(int wmac_offset) +void __init rbspi_wlan_init(u16 id, int wmac_offset) { char *art_buf; u8 wlan_mac[ETH_ALEN]; - art_buf = rb_get_wlan_data(); + art_buf = rb_get_ext_wlan_data(id); if (!art_buf) return; @@ -423,10 +485,12 @@ static void __init rbspi_peripherals_setup(u32 flags) * Sets LAN/WAN/WLAN. */ static void __init rbspi_network_setup(u32 flags, int gmac1_offset, - int wmac_offset) + int wmac0_offset, int wmac1_offset) { /* for QCA953x that will init mdio1_device/data */ ath79_register_mdio(0, 0x0); + if (flags & RBSPI_HAS_MDIO1) + ath79_register_mdio(1, 0x0); if (flags & RBSPI_HAS_WAN4) { ath79_setup_ar934x_eth_cfg(0); @@ -455,12 +519,15 @@ static void __init rbspi_network_setup(u32 flags, int gmac1_offset, ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ath79_register_eth(1); - if (flags & RBSPI_HAS_WLAN) - rbspi_wlan_init(wmac_offset); + if (flags & RBSPI_HAS_WLAN0) + rbspi_wlan_init(0, wmac0_offset); + + if (flags & RBSPI_HAS_WLAN1) + rbspi_wlan_init(1, wmac1_offset); } /* - * Init the mAP lite hardware. + * Init the mAP lite hardware (QCA953x). * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. * Trying to use GMAC0 in direct mode was unsucessful, so we're * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal @@ -468,15 +535,15 @@ static void __init rbspi_network_setup(u32 flags, int gmac1_offset, */ static void __init rbmapl_setup(void) { - u32 flags = RBSPI_HAS_WLAN; + u32 flags = RBSPI_HAS_WLAN0; if (rbspi_platform_setup()) return; rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1); + /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 1, 0); ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds); @@ -491,7 +558,7 @@ static void __init rbmapl_setup(void) } /* - * Init the hAP lite hardware. + * Init the hAP lite hardware (QCA953x). * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4 * being assigned to LAN on the casing, and port 1 being assigned * to "internet" (WAN) on the casing. Port 1 is connected to PHY3. @@ -499,15 +566,15 @@ static void __init rbmapl_setup(void) */ static void __init rbhapl_setup(void) { - u32 flags = RBSPI_HAS_WLAN; + u32 flags = RBSPI_HAS_WLAN0; if (rbspi_platform_setup()) return; rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 4 */ - rbspi_network_setup(flags, 0, 4); + /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 4 */ + rbspi_network_setup(flags, 0, 4, 0); ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds); @@ -527,8 +594,8 @@ static void __init rbspi_952_750r2_setup(u32 flags) rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */ - rbspi_network_setup(flags, 1, 5); + /* GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 */ + rbspi_network_setup(flags, 1, 5, 0); if (flags & RBSPI_HAS_USB) gpio_request_one(RB952_GPIO_USB_POWER, @@ -549,7 +616,7 @@ static void __init rbspi_952_750r2_setup(u32 flags) } /* - * Init the hAP hardware. + * Init the hAP hardware (QCA953x). * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned * to LAN on the casing, and port 1 being assigned to "internet" (WAN). * Port 1 is connected to PHY4 (the ports are labelled in reverse physical @@ -559,7 +626,7 @@ static void __init rbspi_952_750r2_setup(u32 flags) */ static void __init rb952_setup(void) { - u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_WAN4 | RBSPI_HAS_USB | + u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_WAN4 | RBSPI_HAS_USB | RBSPI_HAS_SSR | RBSPI_HAS_POE; if (rbspi_platform_setup()) @@ -569,7 +636,7 @@ static void __init rb952_setup(void) } /* - * Init the hEX (PoE) lite hardware. + * Init the hEX (PoE) lite hardware (QCA953x). * The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without * WLAN. The 750 r2 (hEX lite) is nearly identical to the 750UP r2, only * without USB and POE. It shares the same bootloader board identifier. @@ -588,21 +655,45 @@ static void __init rb750upr2_setup(void) rbspi_952_750r2_setup(flags); } +/* + * Init the LHG hardware (AR9344). + * The LHG 5nD has a single ethernet port connected to PHY0. + * Wireless is provided via 5GHz WLAN1. + */ +static void __init rblhg_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN1 | RBSPI_HAS_MDIO1; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC, WLAN1 MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 0, 1); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rblhg_leds), rblhg_leds); + + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rblhg_gpio_keys), + rblhg_gpio_keys); +} + /* * Init the wAP hardware (EXPERIMENTAL). * The wAP 2nD has a single ethernet port. */ static void __init rbwap_setup(void) { - u32 flags = RBSPI_HAS_WLAN; + u32 flags = RBSPI_HAS_WLAN0; if (rbspi_platform_setup()) return; rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1); + /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 1, 0); ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds); } @@ -613,15 +704,15 @@ static void __init rbwap_setup(void) */ static void __init rbcap_setup(void) { - u32 flags = RBSPI_HAS_WLAN; + u32 flags = RBSPI_HAS_WLAN0; if (rbspi_platform_setup()) return; rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1); + /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ + rbspi_network_setup(flags, 0, 1, 0); gpio_request_one(RBCAP_GPIO_LED_ALL, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, @@ -637,7 +728,7 @@ static void __init rbcap_setup(void) */ static void __init rbmap_setup(void) { - u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_SSR | RBSPI_HAS_POE; + u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_SSR | RBSPI_HAS_POE; if (rbspi_platform_setup()) return; @@ -645,8 +736,8 @@ static void __init rbmap_setup(void) rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS; rbspi_peripherals_setup(flags); - /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 2 */ - rbspi_network_setup(flags, 0, 2); + /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 2 */ + rbspi_network_setup(flags, 0, 2, 0); if (flags & RBSPI_HAS_POE) gpio_request_one(RBMAP_GPIO_POE_POWER, @@ -661,6 +752,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index f3277cd2a0..478a1a9c6f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -178,6 +178,7 @@ enum ath79_mach_type { ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */ ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */ + ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */ ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */ ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */ diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk index 9338e5f916..f41fd34c8c 100644 --- a/target/linux/ar71xx/image/mikrotik.mk +++ b/target/linux/ar71xx/image/mikrotik.mk @@ -26,12 +26,12 @@ TARGET_DEVICES += nand-64m nand-large define Device/rb-nor-flash-16M DEVICE_TITLE := MikroTik RouterBoard with 16 MB SPI NOR flash - DEVICE_PACKAGES := rbcfg + DEVICE_PACKAGES := rbcfg rssileds IMAGE_SIZE := 16000k LOADER_TYPE := elf KERNEL_INSTALL := 1 KERNEL := kernel-bin | lzma | loader-kernel - SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-mapl-2nd + SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-lhg-5nd rb-mapl-2nd IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef diff --git a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch index ae65dff1d8..545de81416 100644 --- a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch +++ b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/prom.c +++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,25 @@ void __init prom_init(void) +@@ -136,6 +136,26 @@ void __init prom_init(void) initrd_end = initrd_start + fw_getenvl("initrd_size"); } #endif @@ -17,6 +17,7 @@ + strstr(arcs_cmdline, "board=H951L") || + strstr(arcs_cmdline, "board=952-hb") || + strstr(arcs_cmdline, "board=953gs") || ++ strstr(arcs_cmdline, "board=lhg") || + strstr(arcs_cmdline, "board=map-hb") || + strstr(arcs_cmdline, "board=2011L") || + strstr(arcs_cmdline, "board=2011r") ||