From: Sven Eckelmann Date: Mon, 30 Jul 2018 15:43:48 +0000 (+0200) Subject: ipq40xx: Limit usable channels for OpenMesh A62 PHYs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e3b8ae2b09e137ce2eae33551923daf302293a0c;p=openwrt%2Fstaging%2Fynezz.git ipq40xx: Limit usable channels for OpenMesh A62 PHYs The OpenMesh A62 is a tri-band device (1x 2.4GHz, 2x 5GHz) with special filters in front of the RX+TX paths to the 5GHz PHYs. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense. Signed-off-by: Sven Eckelmann --- diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 7201481fbc..8092e95e4c 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -222,6 +222,7 @@ status = "okay"; reg = <0x00010000 0 0 0 0>; qcom,ath10k-calibration-variant = "OM-A62"; + ieee80211-freq-limit = <5170000 5350000>; }; }; }; @@ -234,4 +235,5 @@ &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "OM-A62"; + ieee80211-freq-limit = <5470000 5875000>; };