From: Kevin Zhang Date: Sun, 27 Oct 2024 05:12:01 +0000 (-0400) Subject: uboot-rockchip: add support for NanoPi R3S X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e35f0493b1dd3cce1754d3ff93f88ac62f2ab390;p=openwrt%2Fstaging%2Fblocktrron.git uboot-rockchip: add support for NanoPi R3S This commit adds u-boot support for the NanoPi R3S. Signed-off-by: Kevin Zhang Link: https://github.com/openwrt/openwrt/pull/16738 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index dd22ac390e..7070ca973d 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -160,6 +160,13 @@ define U-Boot/rk3566/Default TPL:=rk3566_ddr_1056MHz_v1.21.bin endef +define U-Boot/nanopi-r3s-rk3566 + $(U-Boot/rk3566/Default) + NAME:=NanoPi R3S + BUILD_DEVICES:= \ + friendlyarm_nanopi-r3s +endef + define U-Boot/radxa-cm3-io-rk3566 $(U-Boot/rk3566/Default) NAME:=CM3 IO @@ -305,6 +312,7 @@ UBOOT_TARGETS := \ rock64-rk3328 \ rock-pi-e-rk3328 \ rock-pi-e-v3-rk3328 \ + nanopi-r3s-rk3566 \ radxa-cm3-io-rk3566 \ radxa-zero-3-rk3566 \ rock-3c-rk3566 \ diff --git a/package/boot/uboot-rockchip/patches/100-rockchip-add-FriendlyElec-NanoPi-R3S.patch b/package/boot/uboot-rockchip/patches/100-rockchip-add-FriendlyElec-NanoPi-R3S.patch new file mode 100644 index 0000000000..65d4b0416e --- /dev/null +++ b/package/boot/uboot-rockchip/patches/100-rockchip-add-FriendlyElec-NanoPi-R3S.patch @@ -0,0 +1,661 @@ +--- /dev/null ++++ b/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi +@@ -0,0 +1,25 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. ++ * (http://www.friendlyelec.com) ++ * ++ * Copyright (c) 2023 Tianling Shen ++ * ++ * Copyright (c) 2024 Kevin Zhang ++ */ ++ ++#include "rk356x-u-boot.dtsi" ++ ++&sdhci { ++ cap-mmc-highspeed; ++ mmc-hs200-1_8v; ++ mmc-hs400-1_8v; ++ mmc-hs400-enhanced-strobe; ++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; ++}; ++ ++&vcc5v0_usb { ++ /delete-property/ regulator-always-on; ++ /delete-property/ regulator-boot-on; ++}; ++ +--- /dev/null ++++ b/configs/nanopi-r3s-rk3566_defconfig +@@ -0,0 +1,73 @@ ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_DEFAULT_DEVICE_TREE="rk3566-nanopi-r3s" ++CONFIG_ROCKCHIP_RK3568=y ++CONFIG_TARGET_NANOPI_R3S_RK3566=y ++# CONFIG_OF_UPSTREAM is not set ++CONFIG_SPL_SERIAL=y ++CONFIG_DEBUG_UART_BASE=0xFE660000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYS_LOAD_ADDR=0xc00800 ++CONFIG_PCI=y ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_FIT_SIGNATURE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_LEGACY_IMAGE_FORMAT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-nanopi-r3s.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_SPL_MAX_SIZE=0x40000 ++CONFIG_SPL_PAD_TO=0x7f8000 ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_SPL_ATF=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_PMIC=y ++CONFIG_CMD_REGULATOR=y ++# CONFIG_SPL_DOS_PARTITION is not set ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_OF_LIVE=y ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_SPL_DM_SEQ_ALIAS=y ++CONFIG_SPL_REGMAP=y ++CONFIG_SPL_SYSCON=y ++CONFIG_SPL_CLK=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MISC=y ++CONFIG_SUPPORT_EMMC_RPMB=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y ++CONFIG_MMC_SDHCI_ROCKCHIP=y ++CONFIG_PHY_REALTEK=y ++CONFIG_DWC_ETH_QOS=y ++CONFIG_DWC_ETH_QOS_ROCKCHIP=y ++CONFIG_RTL8169=y ++CONFIG_PCIE_DW_ROCKCHIP=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_DM_PMIC=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_SPL_RAM=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYS_NS16550_MEM32=y ++CONFIG_SYSRESET=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_GENERIC=y +--- /dev/null ++++ b/arch/arm/dts/rk3566-nanopi-r3s.dts +@@ -0,0 +1,554 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Copyright (c) 2020 Rockchip Electronics Co., Ltd. ++ * ++ * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd. ++ * (http://www.friendlyelec.com) ++ * ++ * Copyright (c) 2024 Tianling Shen ++ */ ++ ++/dts-v1/; ++#include ++#include ++#include ++#include ++#include ++#include "rk3566.dtsi" ++ ++/ { ++ model = "FriendlyElec NanoPi R3S"; ++ compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566"; ++ ++ aliases { ++ ethernet0 = &gmac1; ++ mmc0 = &sdhci; ++ mmc1 = &sdmmc0; ++ }; ++ ++ chosen: chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&reset_button_pin>; ++ ++ button-reset { ++ label = "reset"; ++ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ debounce-interval = <50>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>; ++ ++ power_led: led-0 { ++ color = ; ++ function = LED_FUNCTION_POWER; ++ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ lan_led: led-1 { ++ color = ; ++ function = LED_FUNCTION_LAN; ++ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan_led: led-2 { ++ color = ; ++ function = LED_FUNCTION_WAN; ++ gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ vcc3v3_sys: regulator-vcc3v3-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_sys: regulator-vcc5v0-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vdd_usbc>; ++ }; ++ ++ vcc5v0_usb: regulator-vcc5v0_usb { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_usb_host_en>; ++ regulator-name = "vcc5v0_usb"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vdd_usbc: regulator-vdd-usbc { ++ compatible = "regulator-fixed"; ++ regulator-name = "vdd_usbc"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++}; ++ ++&combphy1 { ++ status = "okay"; ++}; ++ ++&combphy2 { ++ status = "okay"; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&gmac1 { ++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; ++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; ++ assigned-clock-rates = <0>, <125000000>; ++ clock_in_out = "output"; ++ phy-mode = "rgmii-id"; ++ phy-handle = <&rgmii_phy1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac1m0_miim ++ &gmac1m0_tx_bus2_level3 ++ &gmac1m0_rx_bus2 ++ &gmac1m0_rgmii_clk_level2 ++ &gmac1m0_rgmii_bus_level3>; ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ vdd_cpu: regulator@1c { ++ compatible = "tcs,tcs4525"; ++ reg = <0x1c>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1150000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ rk809: pmic@20 { ++ compatible = "rockchip,rk809"; ++ reg = <0x20>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ #clock-cells = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int>; ++ system-power-controller; ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc5-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ wakeup-source; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: DCDC_REG2 { ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vdd_npu: DCDC_REG4 { ++ regulator-name = "vdd_npu"; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG5 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_image: LDO_REG1 { ++ regulator-name = "vdda0v9_image"; ++ regulator-min-microvolt = <950000>; ++ regulator-max-microvolt = <950000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda_0v9: LDO_REG2 { ++ regulator-name = "vdda_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_pmu: LDO_REG3 { ++ regulator-name = "vdda0v9_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <900000>; ++ }; ++ }; ++ ++ vccio_acodec: LDO_REG4 { ++ regulator-name = "vccio_acodec"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vccio_sd: LDO_REG5 { ++ regulator-name = "vccio_sd"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_pmu: LDO_REG6 { ++ regulator-name = "vcc3v3_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcca_1v8: LDO_REG7 { ++ regulator-name = "vcca_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcca1v8_pmu: LDO_REG8 { ++ regulator-name = "vcca1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcca1v8_image: LDO_REG9 { ++ regulator-name = "vcca1v8_image"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v3: SWITCH_REG1 { ++ regulator-name = "vcc_3v3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_sd: SWITCH_REG2 { ++ regulator-name = "vcc3v3_sd"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ ++ hym8563: rtc@51 { ++ compatible = "haoyu,hym8563"; ++ reg = <0x51>; ++ #clock-cells = <0>; ++ clock-output-names = "hym8563"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hym8563_int>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ wakeup-source; ++ }; ++}; ++ ++&mdio1 { ++ rgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ interrupt-parent = <&gpio4>; ++ interrupts = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð_phy_reset_pin>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <100000>; ++ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pcie2x1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_reset_h>; ++ reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ gpio-leds { ++ lan_led_pin: lan-led-pin { ++ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ power_led_pin: power-led-pin { ++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ wan_led_pin: wan-led-pin { ++ rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ gmac { ++ eth_phy_reset_pin: eth-phy-reset-pin { ++ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ pcie { ++ pcie_reset_h: pcie-reset-h { ++ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int: pmic-int { ++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ rockchip-key { ++ reset_button_pin: reset-button-pin { ++ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ rtc { ++ hym8563_int: hym8563-int { ++ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb { ++ vcc5v0_usb_host_en: vcc5v0-usb-host-en { ++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmuio1-supply = <&vcc3v3_pmu>; ++ pmuio2-supply = <&vcc3v3_pmu>; ++ vccio1-supply = <&vccio_acodec>; ++ vccio2-supply = <&vcc_1v8>; ++ vccio3-supply = <&vccio_sd>; ++ vccio4-supply = <&vcc_3v3>; ++ vccio5-supply = <&vcc_1v8>; ++ vccio6-supply = <&vcc_3v3>; ++ vccio7-supply = <&vcc_3v3>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ max-frequency = <200000000>; ++ mmc-hs200-1_8v; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; ++ status = "okay"; ++}; ++ ++&sdmmc0 { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ disable-wp; ++ no-sdio; ++ no-mmc; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; ++ sd-uhs-sdr50; ++ vmmc-supply = <&vcc3v3_sd>; ++ vqmmc-supply = <&vccio_sd>; ++ status = "okay"; ++}; ++ ++&tsadc { ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb2phy0 { ++ status = "okay"; ++}; ++ ++&usb2phy0_host { ++ phy-supply = <&vcc5v0_usb>; ++ status = "okay"; ++}; ++ ++&usb2phy0_otg { ++ status = "okay"; ++}; ++ ++&usb_host0_xhci { ++ extcon = <&usb2phy0>; ++ status = "okay"; ++}; ++ ++&usb_host1_xhci { ++ status = "okay"; ++}; ++ ++&vop { ++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; ++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; ++ status = "okay"; ++}; ++ ++&vop_mmu { ++ status = "okay"; ++};