From: Piotr Dymacz Date: Sat, 8 Oct 2016 01:36:35 +0000 (+0200) Subject: ar71xx: add support for YunCore CPE830 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e33dcd1cfe105cb0e1ad09887144e4911eac653f;p=openwrt%2Fstaging%2Fneocturne.git ar71xx: add support for YunCore CPE830 CPE830 is a clone of AP90Q, with different type of antenna (panel) and additional 4 LEDs for WiFi signal level indication. Use the same flash approach as for YunCore AP90Q. Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 2cf72d61d3..383695ca87 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -58,6 +58,7 @@ ap147-010) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt" ;; ap90q|\ +cpe830|\ cpe870|\ dr531) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" @@ -67,6 +68,7 @@ dr531) ap90q) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; + cpe830|\ cpe870) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index e619749609..b18a096b59 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -48,6 +48,7 @@ get_status_led() { status_led="$board:green:power" ;; ap90q|\ + cpe830|\ cpe870|\ gl-inet) status_led="$board:green:lan" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 0d4c1e0a49..37af9d44d4 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -526,6 +526,9 @@ ar71xx_board_detect() { name="cpe510" tplink_pharos_board_detect ;; + *CPE830) + name="cpe830" + ;; *CPE870) name="cpe870" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 66f630884f..887a0f0c1e 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -188,6 +188,7 @@ platform_check_image() { cf-e380ac-v2|\ cf-e520n|\ cf-e530n|\ + cpe830|\ cpe870|\ dgl-5500-a1|\ dhp-1565-a1|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 794e7f809c..c6a757a7eb 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -69,6 +69,7 @@ CONFIG_ATH79_MACH_CF_E380AC_V2=y CONFIG_ATH79_MACH_CF_E520N=y CONFIG_ATH79_MACH_CF_E530N=y CONFIG_ATH79_MACH_CPE510=y +CONFIG_ATH79_MACH_CPE830=y CONFIG_ATH79_MACH_CPE870=y CONFIG_ATH79_MACH_CR3000=y CONFIG_ATH79_MACH_CR5000=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 6daa093a01..001edbeb17 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1211,6 +1211,15 @@ config ATH79_MACH_CPE510 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_CPE830 + bool "YunCore CPE830 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_CPE870 bool "YunCore CPE870 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index b718d6bfd3..ac2dbbb23f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o +obj-$(CONFIG_ATH79_MACH_CPE830) += mach-ap90q.o obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c index 35e578122e..2e9d34d658 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c @@ -1,5 +1,7 @@ /* - * YunCore AP90Q board support + * Support for YunCore boards: + * - AP90Q + * - CPE830 * * Copyright (C) 2016 Piotr Dymacz * @@ -23,6 +25,7 @@ #include "dev-wmac.h" #include "machtypes.h" +/* AP90Q */ #define AP90Q_GPIO_LED_WAN 4 #define AP90Q_GPIO_LED_WLAN 12 #define AP90Q_GPIO_LED_LAN 16 @@ -61,40 +64,62 @@ static struct gpio_keys_button ap90q_gpio_keys[] __initdata = { }, }; -static void __init ap90q_gpio_setup(void) -{ - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); - - /* Mute LEDs on boot */ - gpio_set_value(AP90Q_GPIO_LED_LAN, 1); - gpio_set_value(AP90Q_GPIO_LED_WAN, 1); - - ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); +/* CPE830 */ +#define CPE830_GPIO_LED_LINK4 0 +#define CPE830_GPIO_LED_LINK1 1 +#define CPE830_GPIO_LED_LINK2 2 +#define CPE830_GPIO_LED_LINK3 3 +#define CPE830_GPIO_LED_WAN 4 +#define CPE830_GPIO_LED_WLAN 12 +#define CPE830_GPIO_LED_LAN 16 - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), - ap90q_leds_gpio); +#define CPE830_GPIO_BTN_RESET 17 - ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap90q_gpio_keys), - ap90q_gpio_keys); -} +static struct gpio_led cpe830_leds_gpio[] __initdata = { + { + .name = "cpe830:green:lan", + .gpio = CPE830_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "cpe830:green:wan", + .gpio = CPE830_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "cpe830:green:wlan", + .gpio = CPE830_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "cpe830:green:link1", + .gpio = CPE830_GPIO_LED_LINK1, + .active_low = 1, + }, + { + .name = "cpe830:green:link2", + .gpio = CPE830_GPIO_LED_LINK2, + .active_low = 1, + }, + { + .name = "cpe830:green:link3", + .gpio = CPE830_GPIO_LED_LINK3, + .active_low = 1, + }, + { + .name = "cpe830:green:link4", + .gpio = CPE830_GPIO_LED_LINK4, + .active_low = 1, + }, +}; -static void __init ap90q_setup(void) +static void __init ap90q_cpe830_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_m25p80(NULL); - ap90q_gpio_setup(); - ath79_setup_ar933x_phy4_switch(false, false); ath79_register_mdio(0, 0x0); @@ -118,6 +143,59 @@ static void __init ap90q_setup(void) ath79_register_eth(0); ath79_register_wmac(art, NULL); + + /* For LED on GPIO4 */ + ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); + + ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); + ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); + ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); + + /* Mute LEDs on boot */ + gpio_set_value(AP90Q_GPIO_LED_LAN, 1); + gpio_set_value(AP90Q_GPIO_LED_WAN, 1); + + ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); + ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); + ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); + + ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap90q_gpio_keys), + ap90q_gpio_keys); +} + +static void __init ap90q_setup(void) +{ + ap90q_cpe830_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), + ap90q_leds_gpio); } MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup); + +static void __init cpe830_setup(void) +{ + ap90q_cpe830_common_setup(); + + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK1, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK2, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK3, true); + ath79_gpio_direction_select(CPE830_GPIO_LED_LINK4, true); + + /* Mute LEDs on boot */ + gpio_set_value(CPE830_GPIO_LED_LINK1, 1); + gpio_set_value(CPE830_GPIO_LED_LINK2, 1); + gpio_set_value(CPE830_GPIO_LED_LINK3, 1); + gpio_set_value(CPE830_GPIO_LED_LINK4, 1); + + ath79_gpio_output_select(CPE830_GPIO_LED_LINK1, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK2, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK3, 0); + ath79_gpio_output_select(CPE830_GPIO_LED_LINK4, 0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe830_leds_gpio), + cpe830_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_CPE830, "CPE830", "YunCore CPE830", cpe830_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 50ecff46f5..9a8da22f65 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -61,6 +61,7 @@ enum ath79_mach_type { ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */ ATH79_MACH_CPE210, /* TP-LINK CPE210 */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_CPE830, /* YunCore CPE830 */ ATH79_MACH_CPE870, /* YunCore CPE870 */ ATH79_MACH_CR3000, /* PowerCloud CR3000 */ ATH79_MACH_CR5000, /* PowerCloud CR5000 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 0b8a216a25..331509a15a 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -80,6 +80,14 @@ define Device/cf-e530n endef TARGET_DEVICES += cf-e530n +define Device/cpe830 + $(Device/ap90q) + DEVICE_TITLE := YunCore CPE830 + DEVICE_PACKAGES := rssileds + BOARDNAME = CPE830 +endef +TARGET_DEVICES += cpe830 + define Device/cpe870 DEVICE_TITLE := YunCore CPE870 DEVICE_PACKAGES := rssileds