From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 5 Aug 2006 19:14:53 +0000 (-0700)
Subject: [PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disks
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e31f59ce593b073ee14241781edfb0637697eeb6;p=openwrt%2Fstaging%2Fblogic.git

[PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disks

At least Maxtor OneTouch III require a "start stop unit" command after auto
spin-down before the next access can proceed.  This patch activates the
responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index aaa74f293aaf..b08755e2e68f 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -2515,6 +2515,9 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 		sdev->skip_ms_page_8 = 1;
 	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
 		sdev->fix_capacity = 1;
+	if (scsi_id->ne->guid_vendor_id == 0x0010b9 && /* Maxtor's OUI */
+	    (sdev->type == TYPE_DISK || sdev->type == TYPE_RBC))
+		sdev->allow_restart = 1;
 	return 0;
 }