From: Romain Mahoux Date: Tue, 8 Jun 2021 09:52:18 +0000 (+0200) Subject: ath79: add support for Compex WPJ558 (16M) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e2d08084c30e1f25559bfc1c745c0d0854a75636;p=openwrt%2Fstaging%2Fansuel.git ath79: add support for Compex WPJ558 (16M) Specifications: - SoC: QCA9558 - DRAM: 128MB DDR2 - Flash: 16MB SPI-NOR - Wireless: on-board abgn 2×2 2.4GHz radio - Ethernet: 2x 10/100/1000 Mbps (1x 802.11af PoE) - miniPCIe slot Flash instruction: - From u-boot tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj558-16m-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize boot - From cpximg loader The cpximg loader can be started either by holding the reset button during power up. Once it's running, a TFTP-server under 192.168.1.1 will accept the image appropriate for the board revision that is etched on the board. For example, if the board is labelled '6A07': tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj558-16m-squashfs-cpximg-6a07.bin Signed-off-by: Romain Mahoux [convert to nvmem, remove redundant lan_mac in 02_network] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts new file mode 100644 index 0000000000..61597c8909 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qca955x.dtsi" + +#include +#include + +/ { + compatible = "compex,wpj558-16m", "qca,qca9558"; + model = "Compex WPJ558 (16MB flash)"; + + aliases { + label-mac-device = ð0; + led-boot = &led_sig4; + led-failsafe = &led_sig4; + led-running = &led_sig4; + led-upgrade = &led_sig4; + }; + + leds { + compatible = "gpio-leds"; + + sig1 { + label = "red:sig1"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + sig2 { + label = "yellow:sig2"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + sig3 { + label = "green:sig3"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + led_sig4: sig4 { + label = "green:sig4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x030000>; + read-only; + }; + + firmware@30000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x030000 0xfc0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x56000000 0x00000101 0x00001616>; + phy-handle = <&phy0>; + + nvmem-cells = <&macaddr_uboot_2e010>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; + +&pcie0 { + status = "okay"; +}; + +&uboot { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_uboot_2e010: macaddr@2e010 { + reg = <0x2e010 0x6>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index d37fa4ba2b..e45d1aa73a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -221,6 +221,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:lan" "2:wan" ;; + compex,wpj558-16m) + ucidef_add_switch "switch0" \ + "1:wan" "5:lan" "6@eth0" + ;; devolo,dlan-pro-1200plus-ac|\ devolo,magic-2-wifi) ucidef_add_switch "switch0" \ @@ -528,6 +532,7 @@ ath79_setup_macs() wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1) ;; compex,wpj344-16m|\ + compex,wpj558-16m|\ compex,wpj563) wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 4b943ba282..5bcd4779d3 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -682,6 +682,20 @@ define Device/compex_wpj531-16m endef TARGET_DEVICES += compex_wpj531-16m +define Device/compex_wpj558-16m + SOC := qca9558 + IMAGE_SIZE := 16128k + DEVICE_VENDOR := Compex + DEVICE_MODEL := WPJ558 + DEVICE_VARIANT := 16M + SUPPORTED_DEVICES += wpj558 + IMAGES += cpximg-6a07.bin + IMAGE/cpximg-6a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | mkmylofw_16m 0x691 3 + DEVICE_PACKAGES := kmod-gpio-beeper +endef +TARGET_DEVICES += compex_wpj558-16m + define Device/compex_wpj563 SOC := qca9563 DEVICE_PACKAGES := kmod-usb2 kmod-usb3