From: Eli Cohen Date: Wed, 17 Nov 2010 13:39:43 +0000 (+0000) Subject: IB/mlx4: Fix memory ordering of VLAN insertion control bits X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e27535b9c6e071d461be33b75a33047c9bb4c0ce;p=openwrt%2Fstaging%2Fblogic.git IB/mlx4: Fix memory ordering of VLAN insertion control bits We must fully update the control segment before marking it as valid, so that hardware doesn't start executing it before we're ready. Signed-off-by: Eli Cohen [ Move VLAN control bit setting to before wmb(). - Roland ] Signed-off-by: Roland Dreier --- diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 9a7794ac34c1..2001f20a4361 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? MLX4_WQE_CTRL_FENCE : 0) | size; + if (be16_to_cpu(vlan) < 0x1000) { + ctrl->ins_vlan = 1 << 6; + ctrl->vlan_tag = vlan; + } + /* * Make sure descriptor is fully written before * setting ownership bit (because HW can start @@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] | (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh; - if (be16_to_cpu(vlan) < 0x1000) { - ctrl->ins_vlan = 1 << 6; - ctrl->vlan_tag = vlan; - } - stamp = ind + qp->sq_spare_wqes; ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);