From: Piotr Dymacz Date: Wed, 13 Oct 2021 12:44:51 +0000 (+0200) Subject: imx: remove obsolete Kernel 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e245ae13eed498891bbca25b961022cb7938ff5c;p=openwrt%2Fstaging%2Fblocktrron.git imx: remove obsolete Kernel 5.4 Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/imx/config-5.4 b/target/linux/imx/config-5.4 deleted file mode 100644 index 3e6cf4746a..0000000000 --- a/target/linux/imx/config-5.4 +++ /dev/null @@ -1,420 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MXC=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_ERRATA_814220=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -# CONFIG_ARM_IMX_CPUFREQ_DT is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASN1=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_PM=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_IMX_GPT=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CLZ_TAB=y -CONFIG_COMMON_CLK=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CHACHA20=y -CONFIG_CRYPTO_CHACHA20_NEON=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32_ARM_CE=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DEV_FSL_CAAM=y -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y -CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y -# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set -# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y -CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y -CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 -CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_ARM=y -CONFIG_CRYPTO_SHA1_ARM_NEON=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SHA512_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MISC=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXTCON=y -CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin" -CONFIG_EXTRA_FIRMWARE_DIR="firmware" -CONFIG_F2FS_FS=y -# CONFIG_FEC is not set -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FS_ENCRYPTION=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -# CONFIG_GIANFAR is not set -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MXC=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_IMX_RNGC=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -# CONFIG_I2C_IMX_LPI2C is not set -CONFIG_IMX2_WDT=y -# CONFIG_IMX7ULP_WDT is not set -CONFIG_IMX_DMA=y -# CONFIG_IMX_GPCV2_PM_DOMAINS is not set -CONFIG_IMX_IRQSTEER=y -CONFIG_IMX_SDMA=y -CONFIG_IMX_THERMAL=y -# CONFIG_IMX_WEIM is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IO_URING=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -# CONFIG_JFFS2_FS is not set -CONFIG_KEYS=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -# CONFIG_MMC_MXC is not set -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_SDHCI_ESDHC_IMX is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MPILIB=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_GPMI_NAND=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -# CONFIG_MX3_IPU is not set -CONFIG_MXC_CLK=y -CONFIG_MXS_DMA=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -# CONFIG_NVMEM_IMX_IIM is not set -CONFIG_NVMEM_IMX_OCOTP=y -# CONFIG_NVMEM_SNVS_LPGPR is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_OPP=y -CONFIG_PPS=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -# CONFIG_PWM_IMX1 is not set -# CONFIG_PWM_IMX27 is not set -# CONFIG_PWM_IMX_TPM is not set -CONFIG_PWM_SYSFS=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_IMXDI is not set -# CONFIG_RTC_DRV_MXC is not set -# CONFIG_RTC_DRV_MXC_V2 is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCSI=y -# CONFIG_SENSORS_DRIVETEMP is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -# CONFIG_SOC_IMX50 is not set -# CONFIG_SOC_IMX51 is not set -# CONFIG_SOC_IMX53 is not set -# CONFIG_SOC_IMX6Q is not set -# CONFIG_SOC_IMX6SL is not set -# CONFIG_SOC_IMX6SLL is not set -# CONFIG_SOC_IMX6SX is not set -# CONFIG_SOC_IMX6UL is not set -# CONFIG_SOC_IMX7D is not set -# CONFIG_SOC_IMX7ULP is not set -# CONFIG_SOC_LS1021A is not set -# CONFIG_SOC_VF610 is not set -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_FSL_LPSPI is not set -# CONFIG_SPI_FSL_QUADSPI is not set -CONFIG_SPI_IMX=y -CONFIG_SPI_MASTER=y -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_STMP_DEVICE=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UCLAMP_TASK is not set -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_OF=y -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_EHCI_MXC is not set -CONFIG_USB_GADGET=y -CONFIG_USB_MXS_PHY=y -CONFIG_USB_OTG=y -CONFIG_USB_PHY=y -CONFIG_USB_ROLE_SWITCH=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ULPI_BUS=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VMSPLIT_2G=y -# CONFIG_VMSPLIT_3G is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch b/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch deleted file mode 100644 index e830897704..0000000000 --- a/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch +++ /dev/null @@ -1,481 +0,0 @@ -From 125120298dc05bb55a8874f07aa3f4bb6056bfb3 Mon Sep 17 00:00:00 2001 -From: Robert Jones -Date: Wed, 8 Jan 2020 07:44:21 -0800 -Subject: [PATCH 1/4] ARM: dts: imx: Add GW5907 board support - -The Gateworks GW5907 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE Phy - - bi-color front-panel LED - - 256MB NAND boot device - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - Digital IO expander (pca9555) - - Joystick 12bit adc (ads1015) - -Signed-off-by: Robert Jones -Reviewed-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5907.dts | 14 ++ - arch/arm/boot/dts/imx6q-gw5907.dts | 14 ++ - arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 399 ++++++++++++++++++++++++++++++++++ - 4 files changed, 429 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5907.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -418,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw560x.dtb \ - imx6dl-gw5903.dtb \ - imx6dl-gw5904.dtb \ -+ imx6dl-gw5907.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -489,6 +490,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw560x.dtb \ - imx6q-gw5903.dtb \ - imx6q-gw5904.dtb \ -+ imx6q-gw5907.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5907.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907"; -+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5907.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5907.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907"; -+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi -@@ -0,0 +1,398 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb_otg_vbus: regulator-usb-otg-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_otg_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&hdmi { -+ ddc-i2c-bus = <&i2c3>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ gpio@20 { -+ compatible = "nxp,pca9555"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ adc@48 { -+ compatible = "ti,ads1015"; -+ reg = <0x48>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel@4 { -+ reg = <4>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ -+ channel@5 { -+ reg = <5>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ -+ channel@6 { -+ reg = <6>; -+ ti,gain = <0>; -+ ti,datarate = <5>; -+ }; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_usb_otg_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 -+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart3: uart3grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch b/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch deleted file mode 100644 index 5c52bde70d..0000000000 --- a/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch +++ /dev/null @@ -1,581 +0,0 @@ -From a1fb69366bb16753f0fba6a891fbef5cdd97cfbe Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Wed, 8 Jan 2020 07:44:22 -0800 -Subject: [PATCH 2/4] ARM: dts: imx: Add GW5910 board support - -The Gateworks GW5910 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE RJ45 front-panel - - 1x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - - 5V to 60V DC input barrel jack - - 3axis accelerometer (lis2de12) - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - microSD socket (with UHS-I support) - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6) - - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6) - - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - - off-board SPI connector (1x chip-select) - -Signed-off-by: Tim Harvey -Signed-off-by: Robert Jones -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5910.dts | 14 + - arch/arm/boot/dts/imx6q-gw5910.dts | 14 + - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 491 ++++++++++++++++++++++++++++++++++ - 4 files changed, 521 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -419,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5903.dtb \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ -+ imx6dl-gw5910.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -491,6 +492,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5903.dtb \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ -+ imx6q-gw5910.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910"; -+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5910.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5910.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910"; -+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -0,0 +1,489 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ led2 = &led2; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ }; -+ -+ led2: user3 { -+ label = "user3"; -+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ -+ }; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_wl: regulator-wl { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_wl>; -+ compatible = "regulator-fixed"; -+ regulator-name = "wl"; -+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_bt: regulator-bt { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_reg_bt>; -+ compatible = "regulator-fixed"; -+ regulator-name = "bt"; -+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <100>; -+ enable-active-high; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+}; -+ -+ -+&ecspi3 { -+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi3>; -+ status = "okay"; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ accel@19 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_accel>; -+ compatible = "st,lis2de12"; -+ reg = <0x19>; -+ st,drdy-int-pin = <1>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 0>; -+ interrupt-names = "INT1"; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+/* off-board RS232 */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+/* serial console */ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+/* Sterling-LWB Bluetooth */ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart4>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ -+/* GPS */ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_5p0v>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+/* Sterling-LWB SDIO WiFi */ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ vmmc-supply = <®_3p3v>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&usdhc3 { -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; -+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; -+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -+ vmmc-supply = <®_3p3v>; -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_accel: accelmuxgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_ecspi3: escpi3grp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 -+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 -+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 -+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 -+ >; -+ }; -+ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_bt: regbtgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_reg_wl: regwlgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart4: uart4grp { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ >; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 -+ >; -+ }; -+ -+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch b/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch deleted file mode 100644 index 32f344c588..0000000000 --- a/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch +++ /dev/null @@ -1,434 +0,0 @@ -From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001 -From: Robert Jones -Date: Wed, 8 Jan 2020 07:44:23 -0800 -Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support - -The Gateworks GW5913 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - FEC GbE RJ45 front-panel - - 1x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM - - 6V to 60V DC input connector - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - nanoSIM socket - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - -Signed-off-by: Robert Jones -Reviewed-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++ - arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++ - arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++ - 4 files changed, 378 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -420,6 +420,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ - imx6dl-gw5910.dtb \ -+ imx6dl-gw5913.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ - imx6dl-hummingboard-som-v15.dtb \ -@@ -493,6 +494,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ - imx6q-gw5910.dtb \ -+ imx6q-gw5913.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ - imx6q-hummingboard-emmc-som-v15.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5913.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913"; -+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5913.dts -@@ -0,0 +1,14 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+ -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5913.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913"; -+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi -@@ -0,0 +1,347 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x20000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_5p0v: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "5P0V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ status = "okay"; -+}; -+ -+&wdog1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+}; -+ -+&iomuxc { -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart3: uart3grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch b/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch deleted file mode 100644 index da733ff357..0000000000 --- a/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch +++ /dev/null @@ -1,549 +0,0 @@ -From 9a820b55817011f53771e6bfebae5fe059f0a534 Mon Sep 17 00:00:00 2001 -From: Robert Jones -Date: Wed, 8 Jan 2020 07:44:24 -0800 -Subject: [PATCH 4/4] ARM: dts: imx: Add GW5912 board support - -The Gateworks GW5912 is an IMX6 SoC based single board computer with: - - IMX6Q or IMX6DL - - 32bit DDR3 DRAM - - GbE RJ45 front-panel - - 4x miniPCIe socket with PCI Gen2, USB2 - - 1x miniPCIe socket with PCI Gen2, USB2, mSATA - - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine - - 10V to 60V DC input barrel jack - - 3axis accelerometer (lis2de12) - - GPS (ublox ZOE-M8Q) - - bi-color front-panel LED - - 256MB NAND boot device - - nanoSIM/microSD socket (with UHS-I support) - - user pushbutton - - Gateworks System Controller (hwmon, pushbutton controller, EEPROM) - - CAN Bus transceiver (mcp2562) - - RS232 transceiver (1x UART with flow-control or 2x UART (build option) - - off-board SPI connector (1x chip-select) - -Signed-off-by: Robert Jones -Reviewed-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6dl-gw5912.dts | 13 + - arch/arm/boot/dts/imx6q-gw5912.dts | 13 + - arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 461 ++++++++++++++++++++++++++++++++++ - 4 files changed, 489 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6dl-gw5912.dts - create mode 100644 arch/arm/boot/dts/imx6q-gw5912.dts - create mode 100644 arch/arm/boot/dts/imx6qdl-gw5912.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -420,6 +420,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6dl-gw5904.dtb \ - imx6dl-gw5907.dtb \ - imx6dl-gw5910.dtb \ -+ imx6dl-gw5912.dtb \ - imx6dl-gw5913.dtb \ - imx6dl-hummingboard.dtb \ - imx6dl-hummingboard-emmc-som-v15.dtb \ -@@ -494,6 +495,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ - imx6q-gw5904.dtb \ - imx6q-gw5907.dtb \ - imx6q-gw5910.dtb \ -+ imx6q-gw5912.dtb \ - imx6q-gw5913.dtb \ - imx6q-h100.dtb \ - imx6q-hummingboard.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts -@@ -0,0 +1,13 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+#include "imx6dl.dtsi" -+#include "imx6qdl-gw5912.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912"; -+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-gw5912.dts -@@ -0,0 +1,13 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+/dts-v1/; -+#include "imx6q.dtsi" -+#include "imx6qdl-gw5912.dtsi" -+ -+/ { -+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912"; -+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi -@@ -0,0 +1,459 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright 2019 Gateworks Corporation -+ */ -+ -+#include -+ -+/ { -+ /* these are used by bootloader for disabling nodes */ -+ aliases { -+ led0 = &led0; -+ led1 = &led1; -+ led2 = &led2; -+ nand = &gpmi; -+ usb0 = &usbh1; -+ usb1 = &usbotg; -+ }; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpio_leds>; -+ -+ led0: user1 { -+ label = "user1"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led1: user2 { -+ label = "user2"; -+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ -+ }; -+ -+ led2: user3 { -+ label = "user3"; -+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ -+ }; -+ }; -+ -+ memory@10000000 { -+ device_type = "memory"; -+ reg = <0x10000000 0x40000000>; -+ }; -+ -+ pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pps>; -+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb_vbus: regulator-5p0v { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+}; -+ -+&can1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_flexcan1>; -+ status = "okay"; -+}; -+ -+&ecspi2 { -+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi2>; -+ status = "okay"; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ gpio@23 { -+ compatible = "nxp,pca9555"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@51 { -+ compatible = "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c02"; -+ reg = <0x52>; -+ pagesize = <16>; -+ }; -+ -+ eeprom@53 { -+ compatible = "atmel,24c02"; -+ reg = <0x53>; -+ pagesize = <16>; -+ }; -+ -+ rtc@68 { -+ compatible = "dallas,ds1672"; -+ reg = <0x68>; -+ }; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ accel@19 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_accel>; -+ compatible = "st,lis2de12"; -+ reg = <0x19>; -+ st,drdy-int-pin = <1>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 0>; -+ interrupt-names = "INT1"; -+ }; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pcie>; -+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; -+ -+&pwm1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */ -+ status = "disabled"; -+}; -+ -+&pwm2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ -+ status = "disabled"; -+}; -+ -+&pwm3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ -+ status = "disabled"; -+}; -+ -+&pwm4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ vbus-supply = <®_usb_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ vbus-supply = <®_usb_vbus>; -+ status = "okay"; -+}; -+ -+&usdhc3 { -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; -+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; -+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; -+ vmmc-supply = <®_3p3v>; -+ no-1-8-v; /* firmware will remove if board revision supports */ -+ status = "okay"; -+}; -+ -+&wdog1 { -+ status = "disabled"; -+}; -+ -+&wdog2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_wdog>; -+ fsl,ext-reset-output; -+ status = "okay"; -+}; -+ -+&iomuxc { -+ pinctrl_accel: accelmuxgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_ecspi2: escpi2grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 -+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 -+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 -+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 -+ >; -+ }; -+ -+ pinctrl_flexcan1: flexcan1grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 -+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 -+ >; -+ }; -+ -+ pinctrl_gpio_leds: gpioledsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 -+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 -+ >; -+ }; -+ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_pcie: pciegrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 -+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_pps: ppsgrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm1: pwm1grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm2: pwm2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm3: pwm3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_pwm4: pwm4grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1 -+ >; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1 -+ >; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ >; -+ }; -+ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 -+ >; -+ }; -+ -+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 -+ >; -+ }; -+ -+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 -+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ -+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 -+ >; -+ }; -+ -+ pinctrl_wdog: wdoggrp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 -+ >; -+ }; -+}; diff --git a/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch deleted file mode 100644 index f05c1f1ec1..0000000000 --- a/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 62e7f0b553038e3a1a1b2b067dd1fbdacd634e37 Mon Sep 17 00:00:00 2001 -From: Robert Jones -Date: Fri, 14 Feb 2020 13:02:41 -0800 -Subject: [PATCH] ARM: dts: imx6qdl-gw553x: add lsm9ds1 iio imu/magn support - -Add one node for the accel/gyro i2c device and another for the separate -magnetometer device in the lsm9ds1. - -Signed-off-by: Robert Jones -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi -@@ -173,6 +173,25 @@ - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - -+ magn@1c { -+ compatible = "st,lsm9ds1-magn"; -+ reg = <0x1c>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mag>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <2 IRQ_TYPE_EDGE_RISING>; -+ }; -+ -+ imu@6a { -+ compatible = "st,lsm9ds1-imu"; -+ reg = <0x6a>; -+ st,drdy-int-pin = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_imu>; -+ interrupt-parent = <&gpio7>; -+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ - ltc3676: pmic@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; -@@ -426,6 +445,12 @@ - >; - }; - -+ pinctrl_imu: imugrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 -+ >; -+ }; -+ - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 -@@ -449,6 +474,12 @@ - >; - }; - -+ pinctrl_mag: maggrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 -+ >; -+ }; -+ - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 diff --git a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch b/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch deleted file mode 100644 index 1d8844fb0d..0000000000 --- a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 66d19a4f8d0fa7539f90cad64d793b4dac6f6e5d Mon Sep 17 00:00:00 2001 -From: Robert Jones -Date: Fri, 14 Feb 2020 13:01:55 -0800 -Subject: [PATCH] ARM: dts: imx: ventana: add fxos8700 on gateworks boards - -Add fxos8700 iio imu entries for Gateworks ventana SBCs. - -Signed-off-by: Robert Jones -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 5 +++++ - arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 +++++ - arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 +++++ - 3 files changed, 15 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi -@@ -313,6 +313,11 @@ - interrupts = <12 2>; - wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; - }; -+ -+ accel@1e { -+ compatible = "nxp,fxos8700"; -+ reg = <0x1e>; -+ }; - }; - - &ldb { ---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi -@@ -304,6 +304,11 @@ - interrupts = <11 2>; - wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; -+ -+ accel@1e { -+ compatible = "nxp,fxos8700"; -+ reg = <0x1e>; -+ }; - }; - - &ldb { ---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi -@@ -361,6 +361,11 @@ - interrupts = <12 2>; - wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; - }; -+ -+ accel@1e { -+ compatible = "nxp,fxos8700"; -+ reg = <0x1e>; -+ }; - }; - - &ldb { diff --git a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch b/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch deleted file mode 100644 index 72a98a2b15..0000000000 --- a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch +++ /dev/null @@ -1,54 +0,0 @@ -From d2cf2f91ba5b6d7696b1870e28017a3e1a7a1bb8 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Fri, 28 Feb 2020 11:46:07 -0800 -Subject: [PATCH] ARM: dts: imx6qdl-gw5910: add CC1352 UART - -The GW5910-C revision adds a TI CC1352 connected to IMX UART4 - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 25 +++++++++++++++++++++++++ - 1 file changed, 25 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -218,6 +218,14 @@ - status = "okay"; - }; - -+/* cc1352 */ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart3>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ - /* Sterling-LWB Bluetooth */ - &uart4 { - pinctrl-names = "default"; -@@ -409,6 +417,23 @@ - >; - }; - -+ pinctrl_uart3: uart3grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 -+ MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 -+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ -+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ -+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ -+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ -+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ -+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ -+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ -+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ -+ >; -+ }; -+ - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 diff --git a/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch b/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch deleted file mode 100644 index 8d436be631..0000000000 --- a/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 957743b79b1ebb710f5498b61a212cebc302e685 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Wed, 29 Apr 2020 08:22:35 -0700 -Subject: [PATCH 01/20] ARM: dts: imx6qdl-gw552x: add USB OTG support - -The GW552x-B board revision adds USB OTG support. - -Enable the device-tree node and configure the OTG_ID pin. - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi -@@ -258,6 +258,14 @@ - status = "okay"; - }; - -+&usbotg { -+ vbus-supply = <®_5p0v>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ disable-over-current; -+ status = "okay"; -+}; -+ - &wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; -@@ -359,6 +367,12 @@ - >; - }; - -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 -+ >; -+ }; -+ - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 diff --git a/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch deleted file mode 100644 index 537b6f4d67..0000000000 --- a/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 9e72702a3d9a967edac02d8e937bce2b68b77814 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Tue, 12 May 2020 13:59:37 -0700 -Subject: [PATCH 05/20] ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn - support - -Add one node for the accel/gyro i2c device and another for the separate -magnetometer device in the lsm9ds1. - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 31 +++++++++++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi -@@ -295,6 +295,15 @@ - VDDIO-supply = <®_3p3v>; - }; - -+ magn@1c { -+ compatible = "st,lsm9ds1-magn"; -+ reg = <0x1c>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mag>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_RISING>; -+ }; -+ - tca8418: keypad@34 { - compatible = "ti,tca8418"; - pinctrl-names = "default"; -@@ -389,6 +398,16 @@ - }; - }; - }; -+ -+ imu@6a { -+ compatible = "st,lsm9ds1-imu"; -+ reg = <0x6a>; -+ st,drdy-int-pin = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_imu>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; -+ }; - }; - - &i2c3 { -@@ -609,6 +628,12 @@ - >; - }; - -+ pinctrl_imu: imugrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 -+ >; -+ }; -+ - pinctrl_keypad: keypadgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ -@@ -616,6 +641,12 @@ - >; - }; - -+ pinctrl_mag: maggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 -+ >; -+ }; -+ - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ diff --git a/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch deleted file mode 100644 index 4d24b40535..0000000000 --- a/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch +++ /dev/null @@ -1,69 +0,0 @@ -From c8756cbad816954be912ba32277ccd55fe7acc01 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Tue, 12 May 2020 13:59:56 -0700 -Subject: [PATCH 06/20] ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn - support - -Add one node for the accel/gyro i2c device and another for the separate -magnetometer device in the lsm9ds1. - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi -@@ -248,6 +248,15 @@ - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - -+ magn@1c { -+ compatible = "st,lsm9ds1-magn"; -+ reg = <0x1c>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_mag>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <17 IRQ_TYPE_EDGE_RISING>; -+ }; -+ - ltc3676: pmic@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; -@@ -320,6 +329,16 @@ - }; - }; - }; -+ -+ imu@6a { -+ compatible = "st,lsm9ds1-imu"; -+ reg = <0x6a>; -+ st,drdy-int-pin = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_imu>; -+ interrupt-parent = <&gpio4>; -+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; -+ }; - }; - - &i2c3 { -@@ -501,6 +520,18 @@ - >; - }; - -+ pinctrl_imu: imugrp { -+ fsl,pins = < -+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_mag: maggrp { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 -+ >; -+ }; -+ - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ diff --git a/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch b/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch deleted file mode 100644 index 545a6fddd5..0000000000 --- a/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch +++ /dev/null @@ -1,82 +0,0 @@ -From d40edafe80569c5b4d8893c1cdd1060c54ef433c Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Tue, 12 May 2020 14:54:15 -0700 -Subject: [PATCH 07/20] ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt - -The Sterling-LWB has a BCM4330 which has a UART based bluetooth -HCI. Add support for binding to the bcm_hci driver to take care -of handling the shutdown gpio and loading firmware. - -Because the shutdown gpio is more of an enable than a regulator -go ahead and replace the regulator with a shutdown-gpio. - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 32 ++++++++++++-------------------- - 1 file changed, 12 insertions(+), 20 deletions(-) - ---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -81,19 +81,6 @@ - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -- -- reg_bt: regulator-bt { -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_reg_bt>; -- compatible = "regulator-fixed"; -- regulator-name = "bt"; -- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; -- startup-delay-us = <100>; -- enable-active-high; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- regulator-always-on; -- }; - }; - - -@@ -229,9 +216,14 @@ - /* Sterling-LWB Bluetooth */ - &uart4 { - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_uart4>; -+ pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; - uart-has-rtscts; - status = "okay"; -+ -+ bluetooth { -+ compatible = "brcm,bcm4330-bt"; -+ shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ }; - }; - - /* GPS */ -@@ -286,6 +278,12 @@ - >; - }; - -+ pinctrl_bten: btengrp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 -+ >; -+ }; -+ - pinctrl_ecspi3: escpi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 -@@ -391,12 +389,6 @@ - >; - }; - -- pinctrl_reg_bt: regbtgrp { -- fsl,pins = < -- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 -- >; -- }; -- - pinctrl_reg_wl: regwlgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 diff --git a/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch b/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch deleted file mode 100644 index ce2fa2ee90..0000000000 --- a/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 4792ff641cc8993606013d27d84cda59d8cc76c5 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Tue, 12 May 2020 15:02:34 -0700 -Subject: [PATCH 08/20] ARM: dts: imx6qdl-gw5910: fix wlan regulator - -Connect the wl_reg regulator to usdhc2 such that it can be enabled -and disabled as needed. There is no need for this to be always-on. - -Signed-off-by: Tim Harvey -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi -@@ -79,7 +79,6 @@ - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -- regulator-always-on; - }; - }; - -@@ -249,7 +248,7 @@ - &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; -- vmmc-supply = <®_3p3v>; -+ vmmc-supply = <®_wl>; - non-removable; - bus-width = <4>; - status = "okay"; diff --git a/target/linux/imx/patches-5.4/100-bootargs.patch b/target/linux/imx/patches-5.4/100-bootargs.patch deleted file mode 100644 index cf63a3bdb1..0000000000 --- a/target/linux/imx/patches-5.4/100-bootargs.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/imx6dl-wandboard.dts -+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts -@@ -16,4 +16,8 @@ - device_type = "memory"; - reg = <0x10000000 0x40000000>; - }; -+ -+ chosen { -+ bootargs = "console=ttymxc0,115200"; -+ }; - }; diff --git a/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch b/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch deleted file mode 100644 index bae9df1734..0000000000 --- a/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch +++ /dev/null @@ -1,86 +0,0 @@ -arm: dts: apalis-ixora: Add status LEDs aliases - -Signed-off-by: Petr Å tetiar - ---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts -@@ -60,6 +60,10 @@ - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; -+ led-boot = &led_boot; -+ led-failsafe = &led_failsafe; -+ led-running = &led_running; -+ led-upgrade = &led_upgrade; - }; - - chosen { -@@ -127,22 +131,22 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - -- led4-green { -+ led_running: led4-green { - label = "LED_4_GREEN"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - -- led4-red { -+ led_upgrade: led4-red { - label = "LED_4_RED"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - }; - -- led5-green { -+ led_boot: led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - -- led5-red { -+ led_failsafe: led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; ---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -@@ -61,6 +61,10 @@ - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; -+ led-boot = &led_boot; -+ led-failsafe = &led_failsafe; -+ led-running = &led_running; -+ led-upgrade = &led_upgrade; - }; - - chosen { -@@ -128,22 +132,22 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - -- led4-green { -+ led_running: led4-green { - label = "LED_4_GREEN"; -- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - -- led4-red { -+ led_upgrade: led4-red { - label = "LED_4_RED"; -- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - }; - -- led5-green { -+ led_boot: led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - -- led5-red { -+ led_failsafe: led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch b/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch deleted file mode 100644 index f5afb66371..0000000000 --- a/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch +++ /dev/null @@ -1,76 +0,0 @@ -arm: dts: apalis-ixora: Add switch3 as reset button - -Signed-off-by: Petr Å tetiar - ---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts -@@ -74,7 +74,7 @@ - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gpio_keys>; -+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>; - - wakeup { - label = "Wake-Up"; -@@ -83,6 +83,13 @@ - debounce-interval = <10>; - wakeup-source; - }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -+ linux,code = ; -+ debounce-interval = <10>; -+ }; - }; - - lcd_display: disp0 { -@@ -298,4 +305,10 @@ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; -+ -+ pinctrl_switch3_ixora: switch3ixora { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 -+ >; -+ }; - }; ---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts -+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts -@@ -73,7 +73,7 @@ - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_gpio_keys>; -+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>; - - wakeup { - label = "Wake-Up"; -@@ -82,6 +82,13 @@ - debounce-interval = <10>; - wakeup-source; - }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -+ linux,code = ; -+ debounce-interval = <10>; -+ }; - }; - - lcd_display: disp0 { -@@ -299,4 +306,10 @@ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; -+ -+ pinctrl_switch3_ixora: switch3ixora { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 -+ >; -+ }; - };