From: INAGAKI Hiroshi Date: Mon, 19 Feb 2018 05:35:42 +0000 (+0900) Subject: ramips: add support for Tama W06 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1;p=openwrt%2Fstaging%2Fdangole.git ramips: add support for Tama W06 Tama Electric Axing W06 is a 2.4 GHz band 11n router, based on Mediatek MT7688AN. Specification: - MT7688AN (575 MHz) - 64 MB of RAM (DDR2 SDRAM) - 16 MB of Flash (SPI) - 1T1R 2.4 GHz - 1x 10/100/1000 Mbps Ethernet - 4x LEDs (GPIO connected: 3), 1x button - 1x USB 2.0 Type-A (host) - UART header on PCB (GND, RX, TX, Vcc from RJ45 side) Flash instruction using sysupgrade image: 1. Connect micro-USB cable for power supply into W06 and turn on the router 2. Connect to wifi with SSID "tama-*" with password. Complete SSID and password are listed on the back of the router 3. Access to 192.168.1.1 and login with user name "admin" and password empty 4. In firmware update（ファームウェア更新） page, click "参照" button and click "ブラウザー" button to open file browser, select the sysupgrade image and press OK button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 16d38dd5fe..515656f647 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -362,6 +362,10 @@ rt-n14u) set_wifi_led "$boardname:blue:air" set_usb_led "$boardname:blue:usb" ;; +tama,w06) + ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" + ;; tew-714tru) set_usb_led "$boardname:red:usb" set_wifi_led "$boardname:green:wifi" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 946810b3e2..fe19a226f8 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -248,6 +248,7 @@ ramips_setup_interfaces() mzk-ex750np|\ na930|\ pbr-d1|\ + tama,w06|\ u25awf-h1|\ wli-tx4-ag300n|\ wmdr-143n|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 23d31e9463..a0610b257f 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -141,6 +141,7 @@ platform_check_image() { sap-g3200u3|\ sk-wb8|\ sl-r7205|\ + tama,w06|\ tew-638apb-v2|\ tew-691gr|\ tew-692gr|\ diff --git a/target/linux/ramips/dts/W06.dts b/target/linux/ramips/dts/W06.dts new file mode 100644 index 0000000000..c29a01ff99 --- /dev/null +++ b/target/linux/ramips/dts/W06.dts @@ -0,0 +1,115 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "tama,w06", "mediatek,mt7628an-soc"; + model = "Tama W06"; + + memory@0{ + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wps { + label = "w06:green:wps"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "w06:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wireless { + label = "w06:green:wlan"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart1", "p0led_an", "wdt"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xeb0000>; + }; + + partition@f00000 { + label = "user-data"; + reg = <0xf00000 0x100000>; + read-only; + }; + }; +}; + +&wmac { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index fe52809570..415075b22d 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -19,6 +19,14 @@ endef DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION +define Device/tama_w06 + DTS := W06 + IMAGE_SIZE := 15040k + DEVICE_TITLE := Tama W06 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci +endef +TARGET_DEVICES += tama_w06 + define Device/duzun-dm06 DTS := DUZUN-DM06 DEVICE_TITLE := DuZun DM06