From: Chen Minqiang Date: Fri, 22 Feb 2019 14:38:59 +0000 (+0800) Subject: ramips: rework network settings for HC5861 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e15bda603a9aad3564c46071c07b299703ec0f71;p=openwrt%2Fstaging%2Fneocturne.git ramips: rework network settings for HC5861 dts: disable port4 and leave it ephy mode because it connect to nothing switch port5 connected to GE port we use it as wan port Signed-off-by: Chen Minqiang --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8417ac68ab..6657b7273d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -315,11 +315,14 @@ ramips_setup_interfaces() "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; hc5661|\ - hc5861|\ y1s) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" ;; + hc5861) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "5:wan" "6@eth0" + ;; iodata,wn-ac1167gr) ucidef_add_switch "switch1" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" diff --git a/target/linux/ramips/dts/HC5861.dts b/target/linux/ramips/dts/HC5861.dts index 09e2383e3a..76b2ce1088 100644 --- a/target/linux/ramips/dts/HC5861.dts +++ b/target/linux/ramips/dts/HC5861.dts @@ -72,15 +72,9 @@ status = "okay"; mtd-mac-address = <&factory 0x4>; pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; mediatek,portmap = "wllll"; - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - port@5 { status = "okay"; phy-handle = <&phy5>; @@ -90,11 +84,6 @@ mdio-bus { status = "okay"; - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - phy5: ethernet-phy@5 { reg = <5>; phy-mode = "rgmii"; @@ -102,18 +91,22 @@ }; }; -&gsw { - mediatek,port4 = "gmac"; -}; - &pcie { status = "okay"; }; &pcie0 { - mt76@0,0 { + wifi@0,0 { + compatible = "pci14c3,7662"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; + +&state_default { + gpio { + ralink,group = "uartf", "wled", "rgmii2", "ephy"; + ralink,function = "gpio"; + }; +};