From: Thibaut VARÈNE Date: Sun, 12 Jun 2022 19:48:40 +0000 (+0200) Subject: ath79: add support for RouterBOARD mAP X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e1223dbee332b89caf71850eb909104529595c31;p=openwrt%2Fstaging%2Flynxis.git ath79: add support for RouterBOARD mAP The MikroTik mAP-2nd (sold as mAP) is an indoor 2.4Ghz AP with 802.3af/at PoE input and passive PoE passthrough. See https://mikrotik.com/product/RBmAP2nD for more details. Specifications: - SoC: QCA9533 - RAM: 64MB - Storage: 16MB NOR - Wireless: QCA9533 802.11b/g/n 2x2 - Ethernet: 2x 10/100 ports, 802.3af/at PoE in port 1, 500 mA passive PoE out on port 2 - 7 user-controllable LEDs Note: the device is a tiny AP and does not distinguish between both ethernet ports roles, so they are both assigned to lan. With the current setup, ETH1 is connected to eth1 and ETH2 is connected to eth0 via the embedded switch port 2. Flashing: TFTP boot initramfs image and then perform sysupgrade. The "ETH1" port must be used to upload the TFTP image. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Tested-By: Andrew Powers-Holmes Signed-off-by: Thibaut VARÈNE --- diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts new file mode 100644 index 0000000000..25971e6f43 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-map-2nd.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + compatible = "mikrotik,routerboard-map-2nd", "qca,qca9533"; + model = "MikroTik RouterBOARD mAP-2nD (mAP)"; + + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-running = &led_user; + led-upgrade = &led_user; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "green:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + eth_1 { + label = "green:eth_1"; + gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>; + }; + + eth_2 { + label = "green:eth_2"; + gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>; + }; + + poe_out { + label = "red:poe_out"; + gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>; + }; + + led_user: user { + label = "green:user"; + gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + ap_cap { + label = "green:ap_cap"; + gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-export { + compatible = "gpio-export"; + + usb_power { + gpio-export,name = "usb-power"; + gpio-export,output = <1>; + gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>; + }; + + enable_poe_port5 { + gpio-export,name = "enable-poe"; + gpio-export,output = <0>; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pin_spi_cs1>; + + gpio_ext: gpio_ext@1 { + compatible = "fairchild,74hc595"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <25000000>; + }; +}; + + +&pinmux { + pin_spi_cs1: pinmux_spi_cs1 { + pinctrl-single,bits = <0x8 0x0a000000 0xff000000>; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index d8ae726e87..c90579fbb5 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -85,6 +85,15 @@ define Device/mikrotik_routerboard-lhg-5nd endef TARGET_DEVICES += mikrotik_routerboard-lhg-5nd +define Device/mikrotik_routerboard-map-2nd + $(Device/mikrotik_nor) + SOC := qca9533 + DEVICE_MODEL := RouterBOARD mAP-2nD (mAP) + DEVICE_PACKAGES += kmod-usb2 kmod-ledtrig-gpio + IMAGE_SIZE := 16256k +endef +TARGET_DEVICES += mikrotik_routerboard-map-2nd + define Device/mikrotik_routerboard-mapl-2nd $(Device/mikrotik_nor) SOC := qca9533 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index edb83b9baa..76b91a54a5 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -28,6 +28,11 @@ mikrotik,routerboard-lhg-5nd) ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100" ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100" ;; +mikrotik,routerboard-map-2nd) + ucidef_set_led_netdev "eth_1" "eth_1" "green:eth_1" "eth1" + ucidef_set_led_switch "eth_2" "eth_2" "green:eth_2" "switch0" "0x4" + ucidef_set_led_gpio "poe" "poe" "red:poe_out" "14" "0" + ;; mikrotik,routerboard-wapr-2nd) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100" diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index b05a41ec36..5646d8cf68 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -30,6 +30,9 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" ;; + mikrotik,routerboard-map-2nd) + ucidef_set_interface_lan "eth0 eth1" + ;; mikrotik,routerboard-962uigs-5hact2hnt) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" @@ -52,6 +55,7 @@ ath79_setup_macs() mikrotik,routerboard-912uag-2hpnd|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-lhg-5nd|\ + mikrotik,routerboard-map-2nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ mikrotik,routerboard-wap-2nd|\ diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0baed0665c..aa5354bfdb 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -31,6 +31,9 @@ case "$FIRMWARE" in mikrotik,routerboard-wapr-2nd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1) ;; + mikrotik,routerboard-map-2nd) + caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 3) + ;; mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2)