From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Thu, 5 Dec 2013 20:43:33 +0000 (-0700)
Subject: staging: comedi: amplc_pci230: tidy up irq request
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e10c19a83c223777d5b302c683fdbad9cc57ff53;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: amplc_pci230: tidy up irq request

Clean up the irq request in the attach of this driver and remove the
dev_{level} noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 58e7a43586e6..48a0f527b431 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -2633,7 +2633,7 @@ static int pci230_attach_common(struct comedi_device *dev,
 	struct comedi_subdevice *s;
 	unsigned long iobase1, iobase2;
 	/* PCI230's I/O spaces 1 and 2 respectively. */
-	int irq_hdl, rc;
+	int rc;
 
 	comedi_set_hw_dev(dev, &pci_dev->dev);
 
@@ -2705,16 +2705,12 @@ static int pci230_attach_common(struct comedi_device *dev,
 	outw(devpriv->adcg, dev->iobase + PCI230_ADCG);
 	outw(devpriv->adccon | PCI230_ADC_FIFO_RESET,
 	     dev->iobase + PCI230_ADCCON);
-	/* Register the interrupt handler. */
-	irq_hdl = request_irq(pci_dev->irq, pci230_interrupt,
-			      IRQF_SHARED, "amplc_pci230", dev);
-	if (irq_hdl < 0) {
-		dev_warn(dev->class_dev,
-			 "unable to register irq %u, commands will not be available\n",
-			 pci_dev->irq);
-	} else {
-		dev->irq = pci_dev->irq;
-		dev_dbg(dev->class_dev, "registered irq %u\n", pci_dev->irq);
+
+	if (pci_dev->irq) {
+		rc = request_irq(pci_dev->irq, pci230_interrupt, IRQF_SHARED,
+				 dev->board_name, dev);
+		if (rc == 0)
+			dev->irq = pci_dev->irq;
 	}
 
 	rc = comedi_alloc_subdevices(dev, 3);
@@ -2730,14 +2726,14 @@ static int pci230_attach_common(struct comedi_device *dev,
 	s->range_table = &pci230_ai_range;
 	s->insn_read = &pci230_ai_rinsn;
 	s->len_chanlist = 256;	/* but there are restrictions. */
-	/* Only register commands if the interrupt handler is installed. */
-	if (irq_hdl == 0) {
+	if (dev->irq) {
 		dev->read_subdev = s;
 		s->subdev_flags |= SDF_CMD_READ;
 		s->do_cmd = &pci230_ai_cmd;
 		s->do_cmdtest = &pci230_ai_cmdtest;
 		s->cancel = pci230_ai_cancel;
 	}
+
 	s = &dev->subdevices[1];
 	/* analog output subdevice */
 	if (thisboard->ao_chans > 0) {
@@ -2749,9 +2745,7 @@ static int pci230_attach_common(struct comedi_device *dev,
 		s->insn_write = &pci230_ao_winsn;
 		s->insn_read = &pci230_ao_rinsn;
 		s->len_chanlist = thisboard->ao_chans;
-		/* Only register commands if the interrupt handler is
-		 * installed. */
-		if (irq_hdl == 0) {
+		if (dev->irq) {
 			dev->write_subdev = s;
 			s->subdev_flags |= SDF_CMD_WRITE;
 			s->do_cmd = &pci230_ao_cmd;
@@ -2761,6 +2755,7 @@ static int pci230_attach_common(struct comedi_device *dev,
 	} else {
 		s->type = COMEDI_SUBD_UNUSED;
 	}
+
 	s = &dev->subdevices[2];
 	/* digital i/o subdevice */
 	if (thisboard->have_dio) {