From: John Crispin Date: Fri, 29 Apr 2016 11:34:56 +0000 (+0000) Subject: ramips: add support for Planex MZK-EX750NP. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e05cc286ec19fa634eb7d991fc49582047074735;p=openwrt%2Fsvn-archive%2Farchive.git ramips: add support for Planex MZK-EX750NP. add support for Planex MZK-EX750NP. MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA SVN-Revision: 49268 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index aeaab3395a..47e1e6a6a3 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -206,6 +206,10 @@ mr-102n) set_wifi_led "$board:green:wlan" set_usb_led "$board:green:usb" ;; +mzk-ex750np) + ucidef_set_led_default "power" "power" "$board:red:power" "1" + set_wifi_led "$board:red:wifi" + ;; na930) set_usb_led "$board:blue:status" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index c6c740f623..ee690f6375 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -165,6 +165,7 @@ ramips_setup_interfaces() d105|\ hpm|\ mzk-ex300np|\ + mzk-ex750np|\ na930|\ wli-tx4-ag300n|\ wrh-300cr) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 20ff8fff38..c638d16a81 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -41,7 +41,8 @@ get_status_led() { hlk-rm04|\ jhr-n825r|\ mpr-a1|\ - mpr-a2) + mpr-a2|\ + mzk-ex750np) status_led="$board:red:power" ;; ai-br100|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 2c669c5a5b..0ac0f68bb5 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -298,6 +298,9 @@ ramips_board_detect() { *"MZK-EX300NP") name="mzk-ex300np" ;; + *"MZK-EX750NP") + name="mzk-ex750np" + ;; *"MZK-W300NH2"*) name="mzk-w300nh2" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 2b24030ecd..86ea4a33bd 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -90,6 +90,7 @@ platform_check_image() { mzk-750dhp|\ mzk-dp150n|\ mzk-ex300np|\ + mzk-ex750np|\ mzk-w300nh2|\ mzk-wdpr|\ nbg-419n|\ diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts new file mode 100644 index 0000000000..9b5b418080 --- /dev/null +++ b/target/linux/ramips/dts/MZK-EX750NP.dts @@ -0,0 +1,150 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "Planex MZK-EX750NP"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x730000>; + }; + + partition@780000 { + label = "Udata"; + reg = <0x780000 0x80000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "nd_sd", "rgmii2", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "mzk-ex750np:red:power"; + gpios = <&gpio0 14 1>; + }; + + wifi { + label = "mzk-ex750np:red:wifi"; + gpios = <&gpio3 0 1>; + }; + + wps { + label = "mzk-ex750np:green:wps"; + gpios = <&gpio0 10 1>; + }; + + rep { + label = "mzk-ex750np:blue:rep"; + gpios = <&gpio2 16 1>; + }; + + wifi1 { + label = "mzk-ex750np:blue:wifi1"; + gpios = <&gpio2 19 1>; + }; + + wifi2 { + label = "mzk-ex750np:blue:wifi2"; + gpios = <&gpio2 18 1>; + }; + + wifi3 { + label = "mzk-ex750np:blue:wifi3"; + gpios = <&gpio2 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 13 0>; + linux,code = <0x211>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 35cb46a52d..09c0ec27a0 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930 Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) Image/Build/Profile/MZK-EX300NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP) +Image/Build/Profile/MZK-EX750NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP) Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661) Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761) Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861) @@ -149,6 +150,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DB-WRT01,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) $(call Image/Build/Profile/MZK-EX300NP,$(1)) + $(call Image/Build/Profile/MZK-EX750NP,$(1)) $(call Image/Build/Profile/NA930,$(1)) $(call Image/Build/Profile/HC5661,$(1)) $(call Image/Build/Profile/HC5761,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/planex.mk b/target/linux/ramips/mt7620/profiles/planex.mk index 157cf8d334..f461aeb211 100644 --- a/target/linux/ramips/mt7620/profiles/planex.mk +++ b/target/linux/ramips/mt7620/profiles/planex.mk @@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description Package set optimized for the Planex MZK-EX300NP. endef $(eval $(call Profile,MZK-EX300NP)) + + +define Profile/MZK-EX750NP + NAME:=Planex MZK-EX750NP + PACKAGES:= kmod-mt76 kmod-mt7610e +endef + +define Profile/MZK-EX750NP/Description + Package set optimized for the Planex MZK-EX750NP. +endef +$(eval $(call Profile,MZK-EX750NP))