From: Rosen Penev Date: Fri, 9 Aug 2024 20:27:20 +0000 (-0700) Subject: mpc85xx: tl-wdr4900: use NVMEM for WAN X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e031ea8aabaef5d7a209e97b72b7b8d695fd3c37;p=openwrt%2Fstaging%2Fxback.git mpc85xx: tl-wdr4900: use NVMEM for WAN Now that the ports are defined in DTS, this is trivial to do. Avoids userspace handling. Signed-off-by: Rosen Penev Link: https://github.com/openwrt/openwrt/pull/16125 Signed-off-by: Robert Marko --- diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network index e5afcf7df6..601bd7e9f1 100644 --- a/target/linux/mpc85xx/base-files/etc/board.d/02_network +++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network @@ -28,7 +28,6 @@ ocedo,panda) ;; tplink,tl-wdr4900-v1) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" - ucidef_set_interface_macaddr "wan" "$(macaddr_add $(mtd_get_mac_binary u-boot 0x4fc00) 1)" ;; watchguard,firebox-t10) ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0" diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts index 5cf3c26fc9..0b22360562 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts @@ -63,7 +63,9 @@ #size-cells = <1>; macaddr_uboot_4fc00: macaddr@4fc00 { + compatible = "mac-base"; reg = <0x4fc00 0x6>; + #nvmem-cell-cells = <1>; }; }; }; @@ -148,6 +150,10 @@ reg = <1>; label = "wan"; phy-handle = <&phy_port1>; + + nvmem-cells = <&macaddr_uboot_4fc00 1>; + nvmem-cell-names = "mac-address"; + }; port@2 { @@ -187,7 +193,7 @@ enet0: ethernet@b0000 { phy-connection-type = "rgmii-id"; - nvmem-cells = <&macaddr_uboot_4fc00>; + nvmem-cells = <&macaddr_uboot_4fc00 0>; nvmem-cell-names = "mac-address"; fixed-link {