From: Guennadi Liakhovetski Date: Sat, 30 Aug 2008 22:39:47 +0000 (+0200) Subject: NAND: add NAND driver for S3C64XX X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=e0056b341069796eaea11eae0fc8eb93a3dceaac;p=project%2Fbcm63xx%2Fu-boot.git NAND: add NAND driver for S3C64XX Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski --- diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 19233105a2..b0abe6e523 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -37,6 +37,7 @@ endif COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o endif COBJS := $(COBJS-y) diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c new file mode 100644 index 0000000000..159fe76aa5 --- /dev/null +++ b/drivers/mtd/nand/s3c64xx.c @@ -0,0 +1,319 @@ +/* + * (C) Copyright 2006 DENX Software Engineering + * + * Implementation for U-Boot 1.1.6 by Samsung + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include +#include + +#include +#include + +#define MAX_CHIPS 2 +static int nand_cs[MAX_CHIPS] = {0, 1}; + +#ifdef CONFIG_NAND_SPL +#define printf(arg...) do {} while (0) +#endif + +/* Nand flash definition values by jsgood */ +#ifdef S3C_NAND_DEBUG +/* + * Function to print out oob buffer for debugging + * Written by jsgood + */ +static void print_oob(const char *header, struct mtd_info *mtd) +{ + int i; + struct nand_chip *chip = mtd->priv; + + printf("%s:\t", header); + + for (i = 0; i < 64; i++) + printf("%02x ", chip->oob_poi[i]); + + printf("\n"); +} +#endif /* S3C_NAND_DEBUG */ + +#ifdef CONFIG_NAND_SPL +static u_char nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readb(this->IO_ADDR_R); +} + +static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + writeb(buf[i], this->IO_ADDR_W); +} + +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + buf[i] = readb(this->IO_ADDR_R); +} +#endif + +static void s3c_nand_select_chip(struct mtd_info *mtd, int chip) +{ + int ctrl = readl(NFCONT); + + switch (chip) { + case -1: + ctrl |= 6; + break; + case 0: + ctrl &= ~2; + break; + case 1: + ctrl &= ~4; + break; + default: + return; + } + + writel(ctrl, NFCONT); +} + +/* + * Hardware specific access to control-lines function + * Written by jsgood + */ +static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + this->IO_ADDR_W = (void __iomem *)NFCMMD; + else if (ctrl & NAND_ALE) + this->IO_ADDR_W = (void __iomem *)NFADDR; + else + this->IO_ADDR_W = (void __iomem *)NFDATA; + if (ctrl & NAND_NCE) + s3c_nand_select_chip(mtd, *(int *)this->priv); + else + s3c_nand_select_chip(mtd, -1); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +/* + * Function for checking device ready pin + * Written by jsgood + */ +static int s3c_nand_device_ready(struct mtd_info *mtdinfo) +{ + return !!(readl(NFSTAT) & NFSTAT_RnB); +} + +#ifdef CFG_S3C_NAND_HWECC +/* + * This function is called before encoding ecc codes to ready ecc engine. + * Written by jsgood + */ +static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + u_long nfcont, nfconf; + + /* + * The original driver used 4-bit ECC for "new" MLC chips, i.e., for + * those with non-zero ID[3][3:2], which anyway only holds for ST + * (Numonyx) chips + */ + nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT; + + writel(nfconf, NFCONF); + + /* Initialize & unlock */ + nfcont = readl(NFCONT); + nfcont |= NFCONT_INITECC; + nfcont &= ~NFCONT_MECCLOCK; + + if (mode == NAND_ECC_WRITE) + nfcont |= NFCONT_ECC_ENC; + else if (mode == NAND_ECC_READ) + nfcont &= ~NFCONT_ECC_ENC; + + writel(nfcont, NFCONT); +} + +/* + * This function is called immediately after encoding ecc codes. + * This function returns encoded ecc codes. + * Written by jsgood + */ +static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + u_long nfcont, nfmecc0; + + /* Lock */ + nfcont = readl(NFCONT); + nfcont |= NFCONT_MECCLOCK; + writel(nfcont, NFCONT); + + nfmecc0 = readl(NFMECC0); + + ecc_code[0] = nfmecc0 & 0xff; + ecc_code[1] = (nfmecc0 >> 8) & 0xff; + ecc_code[2] = (nfmecc0 >> 16) & 0xff; + ecc_code[3] = (nfmecc0 >> 24) & 0xff; + + return 0; +} + +/* + * This function determines whether read data is good or not. + * If SLC, must write ecc codes to controller before reading status bit. + * If MLC, status bit is already set, so only reading is needed. + * If status bit is good, return 0. + * If correctable errors occured, do that. + * If uncorrectable errors occured, return -1. + * Written by jsgood + */ +static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + int ret = -1; + u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr; + u_char err_type, repaired; + + /* SLC: Write ecc to compare */ + nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0]; + nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2]; + writel(nfmeccdata0, NFMECCDATA0); + writel(nfmeccdata1, NFMECCDATA1); + + /* Read ecc status */ + nfestat0 = readl(NFESTAT0); + err_type = nfestat0 & 0x3; + + switch (err_type) { + case 0: /* No error */ + ret = 0; + break; + + case 1: + /* + * 1 bit error (Correctable) + * (nfestat0 >> 7) & 0x7ff :error byte number + * (nfestat0 >> 4) & 0x7 :error bit number + */ + err_byte_addr = (nfestat0 >> 7) & 0x7ff; + repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7)); + + printf("S3C NAND: 1 bit error detected at byte %ld. " + "Correcting from 0x%02x to 0x%02x...OK\n", + err_byte_addr, dat[err_byte_addr], repaired); + + dat[err_byte_addr] = repaired; + + ret = 1; + break; + + case 2: /* Multiple error */ + case 3: /* ECC area error */ + printf("S3C NAND: ECC uncorrectable error detected. " + "Not correctable.\n"); + ret = -1; + break; + } + + return ret; +} +#endif /* CFG_S3C_NAND_HWECC */ + +/* + * Board-specific NAND initialization. The following members of the + * argument are board-specific (per include/linux/mtd/nand.h): + * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device + * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device + * - hwcontrol: hardwarespecific function for accesing control-lines + * - dev_ready: hardwarespecific function for accesing device ready/busy line + * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must + * only be provided if a hardware ECC is available + * - eccmode: mode of ecc, see defines + * - chip_delay: chip dependent delay for transfering data from array to + * read regs (tR) + * - options: various chip options. They can partly be set to inform + * nand_scan about special functionality. See the defines for further + * explanation + * Members with a "?" were not set in the merged testing-NAND branch, + * so they are not set here either. + */ +int board_nand_init(struct nand_chip *nand) +{ + static int chip_n; + + if (chip_n >= MAX_CHIPS) + return -ENODEV; + + NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6; + + nand->IO_ADDR_R = (void __iomem *)NFDATA; + nand->IO_ADDR_W = (void __iomem *)NFDATA; + nand->cmd_ctrl = s3c_nand_hwcontrol; + nand->dev_ready = s3c_nand_device_ready; + nand->select_chip = s3c_nand_select_chip; + nand->options = 0; +#ifdef CONFIG_NAND_SPL + nand->read_byte = nand_read_byte; + nand->write_buf = nand_write_buf; + nand->read_buf = nand_read_buf; +#endif + +#ifdef CFG_S3C_NAND_HWECC + nand->ecc.hwctl = s3c_nand_enable_hwecc; + nand->ecc.calculate = s3c_nand_calculate_ecc; + nand->ecc.correct = s3c_nand_correct_data; + + /* + * If you get more than 1 NAND-chip with different page-sizes on the + * board one day, it will get more complicated... + */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.size = CFG_NAND_ECCSIZE; + nand->ecc.bytes = CFG_NAND_ECCBYTES; +#else + nand->ecc.mode = NAND_ECC_SOFT; +#endif /* ! CFG_S3C_NAND_HWECC */ + + nand->priv = nand_cs + chip_n++; + + return 0; +}