From: Luis Araneda Date: Sun, 13 May 2018 18:05:38 +0000 (-0400) Subject: zynq: reworked image creation process X-Git-Tag: state~1993 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dfac3ffd07f5a99b1605aec5a6b24f389a1a8827;p=openwrt%2Fstaging%2Fchunkeey.git zynq: reworked image creation process After commit a1248da (zynq: convert to new image build code), all boards, became unbootable, entering into a boot loop. Replace the compressed kernel zImage by an uncompressed Image, which is compressed after with gzip. Also, enable the creation of an initramfs image by default. Change images' filename to match the compatible string from the respective .dts file (_). Also, use the shared mkits.sh script and remove the target specific one. Fixes: FS#1204 Run-tested: ZedBoard Signed-off-by: Luis Araneda --- diff --git a/target/linux/zynq/Makefile b/target/linux/zynq/Makefile index 35598441fc..a8bbefccc7 100644 --- a/target/linux/zynq/Makefile +++ b/target/linux/zynq/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk ARCH:=arm BOARD:=zynq BOARDNAME:=Xilinx Zynq 7000 SoCs -FEATURES:=fpu gpio rtc usb usbgadget targz source-only +FEATURES:=fpu gpio rtc usb usbgadget ramdisk targz source-only CPU_TYPE:=cortex-a9 CPU_SUBTYPE:=neon MAINTAINER:=Jason Wu @@ -24,7 +24,7 @@ KERNEL_PATCHVER:=4.4 include $(INCLUDE_DIR)/target.mk -KERNELNAME:=zImage dtbs +KERNELNAME:=Image dtbs DEFAULT_PACKAGES += uboot-envtools diff --git a/target/linux/zynq/image/Makefile b/target/linux/zynq/image/Makefile index a4400c7287..70fb00be69 100644 --- a/target/linux/zynq/image/Makefile +++ b/target/linux/zynq/image/Makefile @@ -8,64 +8,46 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk ################################################# -# Images +# Default and templates ################################################# -# $(1): rootfs contents directory -define Image/mkfs/cpio - ( cd $(call mkfs_target_dir,$(1))/; find . | cpio -o -H newc | gzip -9n > $@ ) +define Device/Default + PROFILES := Default + KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) + KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs + KERNEL_PREFIX := $$(IMAGE_PREFIX) + KERNEL_LOADADDR := 0x8000 endef -# $(1): zynq board id -define Build/dtb - $(call Image/BuildDTB,$(DTS_DIR)/zynq-$(1).dts,$@.dtb) -endef - -define Build/uRamdisk - # Create uboot cpio.gz - mkimage -A arm -T ramdisk -C gzip -n "$(PROFILE) OpenWRT rootfs" \ - -d $(IMAGE_ROOTFS) $@.new - mv $@.new $@ -endef - -# $(1): FIT name/description -define Build/fit - # create FIT image with rootfs - ./mkits.sh \ - -D $(1) -o $@.its -k $(IMAGE_KERNEL) -d $(IMAGE_KERNEL).dtb \ - -C none -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \ - -A $(ARCH) -v $(LINUX_VERSION) -r $(IMAGE_ROOTFS) -z gzip - - PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@ +define Device/FitImageGzip + KERNEL_SUFFIX := -fit-uImage.itb + KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + KERNEL_NAME := Image endef ################################################# # Devices ################################################# -# default kernel load address -KERNEL_LOADADDR=0x8000 -KERNEL_ENTRY=0x8000 - -TARGET_FILESYSTEMS += cpio +define Device/digilent_zynq-zybo + $(call Device/FitImageGzip) + DEVICE_TITLE := ZYBO Development Board + DEVICE_DTS := zynq-zybo +endef +TARGET_DEVICES += digilent_zynq-zybo -# $(1): canonical device name -# $(2): lowercase device id -define ZynqDevice - define Device/$(1) - DEVICE_TITLE := $(1) development board - KERNEL := dtb $(2) | kernel-bin | uImage none - KERNEL_NAME = zImage - IMAGES := uramdisk.image.gz fit.itb - IMAGE/uramdisk.image.gz := uRamdisk - IMAGE/fit.itb := fit $(2) - IMAGE_NAME = $$$$(IMG_PREFIX)-$(2)-$$$$(2) - endef - TARGET_DEVICES += $(1) +define Device/xlnx_zynq-zc702 + $(call Device/FitImageGzip) + DEVICE_TITLE := ZC702 Development Board + DEVICE_DTS := zynq-zc702 endef +TARGET_DEVICES += xlnx_zynq-zc702 -$(eval $(call ZynqDevice,ZC702,zc702)) -$(eval $(call ZynqDevice,ZedBoard,zed)) -$(eval $(call ZynqDevice,ZYBO,zybo)) +define Device/xlnx_zynq-zed + $(call Device/FitImageGzip) + DEVICE_TITLE := Zed Development Board + DEVICE_DTS := zynq-zed +endef +TARGET_DEVICES += xlnx_zynq-zed $(eval $(call BuildImage)) diff --git a/target/linux/zynq/image/mkits.sh b/target/linux/zynq/image/mkits.sh deleted file mode 100755 index 2b00d0fc43..0000000000 --- a/target/linux/zynq/image/mkits.sh +++ /dev/null @@ -1,150 +0,0 @@ -#!/bin/bash -# -# Licensed under the terms of the GNU GPL License version 2 or later. -# -# Author: Peter Tyser -# -# U-Boot firmware supports the booting of images in the Flattened Image -# Tree (FIT) format. The FIT format uses a device tree structure to -# describe a kernel image, device tree blob, ramdisk, etc. This script -# creates an Image Tree Source (.its file) which can be passed to the -# 'mkimage' utility to generate an Image Tree Blob (.itb file). The .itb -# file can then be booted by U-Boot (or other bootloaders which support -# FIT images). See doc/uImage.FIT/howto.txt in U-Boot source code for -# additional information on FIT images. -# - -usage() { - echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \ - "-v version -k kernel [-D name -d dtb] -o its_file" - echo -e "\t-A ==> set architecture to 'arch'" - echo -e "\t-C ==> set compression type 'comp'" - echo -e "\t-a ==> set load address to 'addr' (hex)" - echo -e "\t-e ==> set entry point to 'entry' (hex)" - echo -e "\t-v ==> set kernel version to 'version'" - echo -e "\t-k ==> include kernel image 'kernel'" - echo -e "\t-D ==> human friendly Device Tree Blob 'name'" - echo -e "\t-d ==> include Device Tree Blob 'dtb'" - echo -e "\t-r ==> include ramdisk" - echo -e "\t-z ==> ramdisk compression type" - echo -e "\t-o ==> create output file 'its_file'" - exit 1 -} - -while getopts ":A:a:C:D:d:e:k:o:v:r:z:" OPTION -do - case $OPTION in - A ) ARCH=$OPTARG;; - a ) LOAD_ADDR=$OPTARG;; - C ) COMPRESS=$OPTARG;; - D ) DEVICE=$OPTARG;; - d ) DTB=$OPTARG;; - e ) ENTRY_ADDR=$OPTARG;; - k ) KERNEL=$OPTARG;; - o ) OUTPUT=$OPTARG;; - v ) VERSION=$OPTARG;; - r ) RAMDISK=$OPTARG;; - z ) RD_COMPRESS=$OPTARG;; - * ) echo "Invalid option passed to '$0' (options:$@)" - usage;; - esac -done - -# Make sure user entered all required parameters -if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \ - [ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \ - [ -z "${OUTPUT}" ]; then - usage -fi - -ARCH_UPPER=`echo $ARCH | tr '[:lower:]' '[:upper:]'` - -# Conditionally create fdt information -if [ -n "${DTB}" ]; then - FDT=" - fdt@1 { - description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\"; - data = /incbin/(\"${DTB}\"); - type = \"flat_dt\"; - arch = \"${ARCH}\"; - compression = \"none\"; - hash@1 { - algo = \"crc32\"; - }; - hash@2 { - algo = \"sha1\"; - }; - }; -" - CONF=" fdt = \"fdt@1\";" -fi - -# Conditionally create ramdisk node -if [ -n "${RAMDISK}" ]; then - RD_COMPRESS=${RD_COMPRESS:-none} - RD=" - ramdisk@1 { - description = \"${ARCH_UPPER} OpenWrt ${DEVICE} ramdisk\"; - data = /incbin/(\"${RAMDISK}\"); - type = \"ramdisk\"; - arch = \"${ARCH}\"; - os = \"linux\"; - compression = \"${RD_COMPRESS}\"; - hash@1 { - algo = \"crc32\"; - }; - hash@2 { - algo = \"sha1\"; - }; - }; -" - if [ -z "${CONF}" ]; then - CONF=" ramdisk = \"ramdisk@1\";" - else - CONF="$CONF - ramdisk = \"ramdisk@1\";" - fi -fi - -# Create a default, fully populated DTS file -DATA="/dts-v1/; - -/ { - description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\"; - #address-cells = <1>; - - images { - kernel@1 { - description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\"; - data = /incbin/(\"${KERNEL}\"); - type = \"kernel\"; - arch = \"${ARCH}\"; - os = \"linux\"; - compression = \"${COMPRESS}\"; - load = <${LOAD_ADDR}>; - entry = <${ENTRY_ADDR}>; - hash@1 { - algo = \"crc32\"; - }; - hash@2 { - algo = \"sha1\"; - }; - }; - -${RD} -${FDT} - - }; - - configurations { - default = \"config@1\"; - config@1 { - description = \"OpenWrt\"; - kernel = \"kernel@1\"; -${CONF} - }; - }; -};" - -# Write .its file to disk -echo "$DATA" > ${OUTPUT}