From: Felix Fietkau Date: Sat, 14 May 2016 15:38:56 +0000 (+0200) Subject: mac80211: update to wireless-testing 2016-05-12 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=df93d53a4b7a5ce284dc0c6509057979f233cb92;p=openwrt%2Fstaging%2Fadrian.git mac80211: update to wireless-testing 2016-05-12 Signed-off-by: Felix Fietkau --- diff --git a/package/kernel/acx-mac80211/patches/300-api_sync.patch b/package/kernel/acx-mac80211/patches/300-api_sync.patch new file mode 100644 index 0000000000..94d61351aa --- /dev/null +++ b/package/kernel/acx-mac80211/patches/300-api_sync.patch @@ -0,0 +1,83 @@ +--- a/main.c ++++ b/main.c +@@ -497,7 +497,7 @@ int acx_free_mechanics(acx_device_t *ade + + int acx_init_ieee80211(acx_device_t *adev, struct ieee80211_hw *hw) + { +- hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; ++ __clear_bit(IEEE80211_HW_RX_INCLUDES_FCS, hw->flags); + hw->queues = 1; + hw->wiphy->max_scan_ssids = 1; + +@@ -525,14 +525,14 @@ int acx_init_ieee80211(acx_device_t *ade + /* We base signal quality on winlevel approach of previous driver + * TODO OW 20100615 This should into a common init code + */ +- hw->flags |= IEEE80211_HW_SIGNAL_UNSPEC; ++ __set_bit(IEEE80211_HW_SIGNAL_UNSPEC, hw->flags); + hw->max_signal = 100; + + if (IS_ACX100(adev)) { +- adev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = ++ adev->hw->wiphy->bands[NL80211_BAND_2GHZ] = + &acx100_band_2GHz; + } else if (IS_ACX111(adev)) +- adev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = ++ adev->hw->wiphy->bands[NL80211_BAND_2GHZ] = + &acx111_band_2GHz; + else { + log(L_ANY, "Error: Unknown device"); +@@ -945,8 +945,8 @@ void acx_op_configure_filter(struct ieee + changed_flags, *total_flags); + + /* OWI TODO: Set also FIF_PROBE_REQ ? */ +- *total_flags &= (FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL +- | FIF_CONTROL | FIF_OTHER_BSS); ++ *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL ++ | FIF_OTHER_BSS); + + logf1(L_DEBUG, "2: *total_flags=0x%08x\n", *total_flags); + +@@ -1045,9 +1045,10 @@ void acx_op_tx(struct ieee80211_hw *hw, + } + + int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, +- struct cfg80211_scan_request *req) ++ struct ieee80211_scan_request *hw_req) + { + acx_device_t *adev = hw2adev(hw); ++ struct cfg80211_scan_request *req = &hw_req->req; + struct sk_buff *skb; + size_t ssid_len = 0; + u8 *ssid = NULL; +@@ -1082,7 +1083,7 @@ int acx_op_hw_scan(struct ieee80211_hw * + goto out; + } + #else +- skb = ieee80211_probereq_get(adev->hw, adev->vif, ssid, ssid_len, ++ skb = ieee80211_probereq_get(adev->hw, vif->addr, ssid, ssid_len, + req->ie_len); + if (!skb) { + ret = -ENOMEM; +--- a/main.h ++++ b/main.h +@@ -62,7 +62,7 @@ void acx_op_tx(struct ieee80211_hw *hw, + #endif + + int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, +- struct cfg80211_scan_request *req); ++ struct ieee80211_scan_request *req); + + int acx_recover_hw(acx_device_t *adev); + +--- a/cardsetting.c ++++ b/cardsetting.c +@@ -159,7 +159,7 @@ int acx_set_channel(acx_device_t *adev, + int res = 0; + + adev->rx_status.freq = freq; +- adev->rx_status.band = IEEE80211_BAND_2GHZ; ++ adev->rx_status.band = NL80211_BAND_2GHZ; + + adev->channel = channel; + diff --git a/package/kernel/acx-mac80211/patches/300-kernel_4_2.patch b/package/kernel/acx-mac80211/patches/300-kernel_4_2.patch deleted file mode 100644 index ee92b943e5..0000000000 --- a/package/kernel/acx-mac80211/patches/300-kernel_4_2.patch +++ /dev/null @@ -1,67 +0,0 @@ -diff --git a/main.c b/main.c -index bfec856..3c482d9 100644 ---- a/main.c -+++ b/main.c -@@ -497,7 +497,7 @@ int acx_free_mechanics(acx_device_t *adev) - - int acx_init_ieee80211(acx_device_t *adev, struct ieee80211_hw *hw) - { -- hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; -+ __clear_bit(IEEE80211_HW_RX_INCLUDES_FCS, hw->flags); - hw->queues = 1; - hw->wiphy->max_scan_ssids = 1; - -@@ -525,7 +525,7 @@ int acx_init_ieee80211(acx_device_t *adev, struct ieee80211_hw *hw) - /* We base signal quality on winlevel approach of previous driver - * TODO OW 20100615 This should into a common init code - */ -- hw->flags |= IEEE80211_HW_SIGNAL_UNSPEC; -+ __set_bit(IEEE80211_HW_SIGNAL_UNSPEC, hw->flags); - hw->max_signal = 100; - - if (IS_ACX100(adev)) { -@@ -945,8 +945,8 @@ void acx_op_configure_filter(struct ieee80211_hw *hw, - changed_flags, *total_flags); - - /* OWI TODO: Set also FIF_PROBE_REQ ? */ -- *total_flags &= (FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL -- | FIF_CONTROL | FIF_OTHER_BSS); -+ *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL -+ | FIF_OTHER_BSS); - - logf1(L_DEBUG, "2: *total_flags=0x%08x\n", *total_flags); - -@@ -1045,9 +1045,10 @@ void acx_op_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, - } - - int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, -- struct cfg80211_scan_request *req) -+ struct ieee80211_scan_request *hw_req) - { - acx_device_t *adev = hw2adev(hw); -+ struct cfg80211_scan_request *req = &hw_req->req; - struct sk_buff *skb; - size_t ssid_len = 0; - u8 *ssid = NULL; -@@ -1082,7 +1083,7 @@ int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - goto out; - } - #else -- skb = ieee80211_probereq_get(adev->hw, adev->vif, ssid, ssid_len, -+ skb = ieee80211_probereq_get(adev->hw, vif->addr, ssid, ssid_len, - req->ie_len); - if (!skb) { - ret = -ENOMEM; -diff --git a/main.h b/main.h -index 293f5c8..84ecb9a 100644 ---- a/main.h -+++ b/main.h -@@ -62,7 +62,7 @@ void acx_op_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, - #endif - - int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, -- struct cfg80211_scan_request *req); -+ struct ieee80211_scan_request *req); - - int acx_recover_hw(acx_device_t *adev); - diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index 4ab3899133..5bbb7da5ff 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 -PKG_VERSION:=2016-01-10 +PKG_VERSION:=2016-05-12 PKG_RELEASE:=1 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources PKG_BACKPORT_VERSION:= -PKG_MD5SUM:=be5fae2e8d6f7490f9b073374fb895ba +PKG_MD5SUM:=2142cf38509896dca108624e7c193611 PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) @@ -884,7 +884,7 @@ endef define KernelPackage/lib80211 $(call KernelPackage/mac80211/Default) TITLE:=802.11 Networking stack - DEPENDS:=+kmod-cfg80211 + DEPENDS:=+kmod-cfg80211 +kmod-crypto-hash FILES:= \ $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \ $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \ diff --git a/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch b/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch deleted file mode 100644 index 9adfd8f719..0000000000 --- a/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Felix Fietkau -Date: Thu, 28 Jan 2016 15:16:35 +0100 -Subject: [PATCH] backports: add skb_free_frag() - -Signed-off-by: Felix Fietkau ---- - ---- a/backport-include/linux/skbuff.h -+++ b/backport-include/linux/skbuff.h -@@ -300,4 +300,11 @@ int skb_ensure_writable(struct sk_buff * - - #endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) */ - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0) -+static inline void skb_free_frag(void *data) -+{ -+ put_page(virt_to_head_page(data)); -+} -+#endif -+ - #endif /* __BACKPORT_SKBUFF_H */ diff --git a/package/kernel/mac80211/patches/004-header-backport-GENL_UNS_ADMIN_PERM.patch b/package/kernel/mac80211/patches/004-header-backport-GENL_UNS_ADMIN_PERM.patch new file mode 100644 index 0000000000..38d655fe05 --- /dev/null +++ b/package/kernel/mac80211/patches/004-header-backport-GENL_UNS_ADMIN_PERM.patch @@ -0,0 +1,21 @@ +From: Felix Fietkau +Date: Sat, 14 May 2016 16:39:35 +0200 +Subject: [PATCH] header: backport GENL_UNS_ADMIN_PERM + +Signed-off-by: Felix Fietkau +--- + create mode 100644 backport-include/uapi/linux/genetlink.h + +--- /dev/null ++++ b/backport-include/uapi/linux/genetlink.h +@@ -0,0 +1,10 @@ ++#ifndef __COMPAT_UAPI_LINUX_GENETLINK_H ++#define __COMPAT_UAPI_LINUX_GENETLINK_H ++ ++#include_next ++ ++#ifndef GENL_UNS_ADMIN_PERM ++#define GENL_UNS_ADMIN_PERM GENL_ADMIN_PERM ++#endif ++ ++#endif diff --git a/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch b/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch deleted file mode 100644 index 9b672a8d14..0000000000 --- a/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Felix Fietkau -Date: Thu, 28 Jan 2016 15:19:22 +0100 -Subject: [PATCH] backports: add napi_alloc_frag - -Signed-off-by: Felix Fietkau ---- - ---- a/backport-include/linux/netdevice.h -+++ b/backport-include/linux/netdevice.h -@@ -232,6 +232,10 @@ static inline void backport_unregister_n - #define unregister_netdevice_many LINUX_BACKPORT(unregister_netdevice_many) - #endif - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) -+#define napi_alloc_frag netdev_alloc_frag -+#endif -+ - /* - * Complicated way of saying: We only backport netdev_rss_key stuff on kernels - * that either already have net_get_random_once() (>= 3.13) or where we've been diff --git a/package/kernel/mac80211/patches/005-header-backport-nla_put_u64_64bit-and-nla_put_64bit.patch b/package/kernel/mac80211/patches/005-header-backport-nla_put_u64_64bit-and-nla_put_64bit.patch new file mode 100644 index 0000000000..e20d87a7fd --- /dev/null +++ b/package/kernel/mac80211/patches/005-header-backport-nla_put_u64_64bit-and-nla_put_64bit.patch @@ -0,0 +1,158 @@ +From: Felix Fietkau +Date: Sat, 14 May 2016 16:40:16 +0200 +Subject: [PATCH] header: backport nla_put_u64_64bit and nla_put_64bit + +Signed-off-by: Felix Fietkau +--- + +--- a/backport-include/net/netlink.h ++++ b/backport-include/net/netlink.h +@@ -189,4 +189,148 @@ static inline __le64 nla_get_le64(const + } + #endif /* < 4.4 */ + ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) ++ ++/** ++ * nla_need_padding_for_64bit - test 64-bit alignment of the next attribute ++ * @skb: socket buffer the message is stored in ++ * ++ * Return true if padding is needed to align the next attribute (nla_data()) to ++ * a 64-bit aligned area. ++ */ ++static inline bool nla_need_padding_for_64bit(struct sk_buff *skb) ++{ ++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ++ /* The nlattr header is 4 bytes in size, that's why we test ++ * if the skb->data _is_ aligned. A NOP attribute, plus ++ * nlattr header for next attribute, will make nla_data() ++ * 8-byte aligned. ++ */ ++ if (IS_ALIGNED((unsigned long)skb_tail_pointer(skb), 8)) ++ return true; ++#endif ++ return false; ++} ++ ++/** ++ * nla_align_64bit - 64-bit align the nla_data() of next attribute ++ * @skb: socket buffer the message is stored in ++ * @padattr: attribute type for the padding ++ * ++ * Conditionally emit a padding netlink attribute in order to make ++ * the next attribute we emit have a 64-bit aligned nla_data() area. ++ * This will only be done in architectures which do not have ++ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS defined. ++ * ++ * Returns zero on success or a negative error code. ++ */ ++static inline int nla_align_64bit(struct sk_buff *skb, int padattr) ++{ ++ if (nla_need_padding_for_64bit(skb) && ++ !nla_reserve(skb, padattr, 0)) ++ return -EMSGSIZE; ++ ++ return 0; ++} ++ ++/** ++ * __nla_reserve_64bit - reserve room for attribute on the skb and align it ++ * @skb: socket buffer to reserve room on ++ * @attrtype: attribute type ++ * @attrlen: length of attribute payload ++ * @padattr: attribute type for the padding ++ * ++ * Adds a netlink attribute header to a socket buffer and reserves ++ * room for the payload but does not copy it. It also ensure that this ++ * attribute will have a 64-bit aligned nla_data() area. ++ * ++ * The caller is responsible to ensure that the skb provides enough ++ * tailroom for the attribute header and payload. ++ */ ++static inline struct nlattr *__nla_reserve_64bit(struct sk_buff *skb, int attrtype, ++ int attrlen, int padattr) ++{ ++ if (nla_need_padding_for_64bit(skb)) ++ nla_align_64bit(skb, padattr); ++ ++ return __nla_reserve(skb, attrtype, attrlen); ++} ++ ++/** ++ * __nla_put_64bit - Add a netlink attribute to a socket buffer and align it ++ * @skb: socket buffer to add attribute to ++ * @attrtype: attribute type ++ * @attrlen: length of attribute payload ++ * @data: head of attribute payload ++ * @padattr: attribute type for the padding ++ * ++ * The caller is responsible to ensure that the skb provides enough ++ * tailroom for the attribute header and payload. ++ */ ++static inline void __nla_put_64bit(struct sk_buff *skb, int attrtype, int attrlen, ++ const void *data, int padattr) ++{ ++ struct nlattr *nla; ++ ++ nla = __nla_reserve_64bit(skb, attrtype, attrlen, padattr); ++ memcpy(nla_data(nla), data, attrlen); ++} ++ ++/** ++ * nla_total_size_64bit - total length of attribute including padding ++ * @payload: length of payload ++ */ ++static inline int nla_total_size_64bit(int payload) ++{ ++ return NLA_ALIGN(nla_attr_size(payload)) ++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ++ + NLA_ALIGN(nla_attr_size(0)) ++#endif ++ ; ++} ++ ++/** ++ * nla_put_64bit - Add a netlink attribute to a socket buffer and align it ++ * @skb: socket buffer to add attribute to ++ * @attrtype: attribute type ++ * @attrlen: length of attribute payload ++ * @data: head of attribute payload ++ * @padattr: attribute type for the padding ++ * ++ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store ++ * the attribute header and payload. ++ */ ++static inline int nla_put_64bit(struct sk_buff *skb, int attrtype, int attrlen, ++ const void *data, int padattr) ++{ ++ size_t len; ++ ++ if (nla_need_padding_for_64bit(skb)) ++ len = nla_total_size_64bit(attrlen); ++ else ++ len = nla_total_size(attrlen); ++ if (unlikely(skb_tailroom(skb) < len)) ++ return -EMSGSIZE; ++ ++ __nla_put_64bit(skb, attrtype, attrlen, data, padattr); ++ return 0; ++} ++ ++/** ++ * nla_put_u64_64bit - Add a u64 netlink attribute to a skb and align it ++ * @skb: socket buffer to add attribute to ++ * @attrtype: attribute type ++ * @value: numeric value ++ * @padattr: attribute type for the padding ++ */ ++static inline int nla_put_u64_64bit(struct sk_buff *skb, int attrtype, ++ u64 value, int padattr) ++{ ++ return nla_put_64bit(skb, attrtype, sizeof(u64), &value, padattr); ++} ++ ++ ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) */ ++ + #endif /* __BACKPORT_NET_NETLINK_H */ diff --git a/package/kernel/mac80211/patches/006-compat-bump-rhashtable-backport-version-due-to-API-c.patch b/package/kernel/mac80211/patches/006-compat-bump-rhashtable-backport-version-due-to-API-c.patch new file mode 100644 index 0000000000..1fdad3c633 --- /dev/null +++ b/package/kernel/mac80211/patches/006-compat-bump-rhashtable-backport-version-due-to-API-c.patch @@ -0,0 +1,18 @@ +From: Felix Fietkau +Date: Sat, 14 May 2016 16:44:57 +0200 +Subject: [PATCH] compat: bump rhashtable backport version due to API changes + +Signed-off-by: Felix Fietkau +--- + +--- a/compat/Kconfig ++++ b/compat/Kconfig +@@ -139,7 +139,7 @@ config BPAUTO_BUILD_WANT_DEV_COREDUMP + config BPAUTO_RHASHTABLE + bool + # current API of rhashtable was introduced in version 4.1 +- depends on KERNEL_4_1 ++ depends on KERNEL_4_7 + # not very nice - but better than always having it + default y if MAC80211 + #h-file linux/rhashtable.h diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch index fd1e1cff30..e9a140c26f 100644 --- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch +++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch @@ -1,6 +1,6 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -476,44 +476,6 @@ USB_IPHETH= +@@ -481,45 +481,6 @@ USB_IPHETH= USB_SIERRA_NET= USB_VL600= USB_NET_CH9200= @@ -37,6 +37,7 @@ -BCMA_DRIVER_PCI= -BCMA_DRIVER_PCI_HOSTMODE= -BCMA_DRIVER_MIPS= +-BCMA_PFLASH= -BCMA_SFLASH= -BCMA_NFLASH= -BCMA_DRIVER_GMAC_CMN= @@ -56,7 +57,7 @@ return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev); #else return bus->chipco.dev; -@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct +@@ -4901,7 +4901,7 @@ static int b43_wireless_core_init(struct } if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ diff --git a/package/kernel/mac80211/patches/080-disable_clk_backport.patch b/package/kernel/mac80211/patches/080-disable_clk_backport.patch deleted file mode 100644 index 3765591ebb..0000000000 --- a/package/kernel/mac80211/patches/080-disable_clk_backport.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/compat/compat-3.6.c -+++ b/compat/compat-3.6.c -@@ -147,17 +147,3 @@ int sg_alloc_table_from_pages(struct sg_ - return 0; - } - EXPORT_SYMBOL_GPL(sg_alloc_table_from_pages); -- --/* whoopsie ! */ --#ifndef CONFIG_COMMON_CLK --int clk_enable(struct clk *clk) --{ -- return 0; --} --EXPORT_SYMBOL_GPL(clk_enable); -- --void clk_disable(struct clk *clk) --{ --} --EXPORT_SYMBOL_GPL(clk_disable); --#endif diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch index 02f46c778d..b65b0bd00e 100644 --- a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch +++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch @@ -34,12 +34,9 @@ #include "aes_ccm.h" -void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic, -- size_t mic_len) +static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0, + u8 *a, u8 *b) - { -- struct scatterlist sg[3]; ++{ + int i; + + crypto_cipher_encrypt_one(tfm, b, b_0); @@ -54,55 +51,56 @@ + for (i = 0; i < AES_BLOCK_SIZE; i++) + aad[i] ^= b[i]; + crypto_cipher_encrypt_one(tfm, a, aad); - -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *) aead_req_data; ++ + /* Mask out bits from auth-only-b_0 */ + b_0[0] &= 0x07; - -- memset(aead_req, 0, sizeof(aead_req_data)); ++ + /* S_0 is used to encrypt T (= MIC) */ + b_0[14] = 0; + b_0[15] = 0; + crypto_cipher_encrypt_one(tfm, s_0, b_0); +} - -- sg_init_table(sg, 3); -- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_set_buf(&sg[1], data, data_len); -- sg_set_buf(&sg[2], mic, mic_len); - -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_crypt(aead_req, sg, sg, data_len, b_0); -- aead_request_set_ad(aead_req, sg[0].length); ++ ++ +void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, -+ u8 *data, size_t data_len, u8 *mic, -+ size_t mic_len) -+{ + u8 *data, size_t data_len, u8 *mic, + size_t mic_len) + { +- struct scatterlist sg[3]; + int i, j, last_len, num_blocks; + u8 b[AES_BLOCK_SIZE]; + u8 s_0[AES_BLOCK_SIZE]; + u8 e[AES_BLOCK_SIZE]; + u8 *pos, *cpos; -+ + +- char aead_req_data[sizeof(struct aead_request) + +- crypto_aead_reqsize(tfm)] +- __aligned(__alignof__(struct aead_request)); +- struct aead_request *aead_req = (void *) aead_req_data; + num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); + last_len = data_len % AES_BLOCK_SIZE; + aes_ccm_prepare(tfm, b_0, aad, s_0, b, b); -+ + +- memset(aead_req, 0, sizeof(aead_req_data)); + /* Process payload blocks */ + pos = data; + cpos = data; + for (j = 1; j <= num_blocks; j++) { + int blen = (j == num_blocks && last_len) ? + last_len : AES_BLOCK_SIZE; -+ + +- sg_init_table(sg, 3); +- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); +- sg_set_buf(&sg[1], data, data_len); +- sg_set_buf(&sg[2], mic, mic_len); + /* Authentication followed by encryption */ + for (i = 0; i < blen; i++) + b[i] ^= pos[i]; + crypto_cipher_encrypt_one(tfm, b, b); -+ + +- aead_request_set_tfm(aead_req, tfm); +- aead_request_set_crypt(aead_req, sg, sg, data_len, b_0); +- aead_request_set_ad(aead_req, sg[0].length); + b_0[14] = (j >> 8) & 0xff; + b_0[15] = j & 0xff; + crypto_cipher_encrypt_one(tfm, e, b_0); @@ -125,37 +123,30 @@ - crypto_aead_reqsize(tfm)] - __aligned(__alignof__(struct aead_request)); - struct aead_request *aead_req = (void *) aead_req_data; -- -- if (data_len == 0) -- return -EINVAL; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- sg_init_table(sg, 3); -- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_set_buf(&sg[1], data, data_len); -- sg_set_buf(&sg[2], mic, mic_len); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0); -- aead_request_set_ad(aead_req, sg[0].length); + int i, j, last_len, num_blocks; + u8 *pos, *cpos; + u8 a[AES_BLOCK_SIZE]; + u8 b[AES_BLOCK_SIZE]; + u8 s_0[AES_BLOCK_SIZE]; -+ + +- if (data_len == 0) +- return -EINVAL; + num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); + last_len = data_len % AES_BLOCK_SIZE; + aes_ccm_prepare(tfm, b_0, aad, s_0, a, b); -+ + +- memset(aead_req, 0, sizeof(aead_req_data)); + /* Process payload blocks */ + cpos = data; + pos = data; + for (j = 1; j <= num_blocks; j++) { + int blen = (j == num_blocks && last_len) ? + last_len : AES_BLOCK_SIZE; -+ + +- sg_init_table(sg, 3); +- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); +- sg_set_buf(&sg[1], data, data_len); +- sg_set_buf(&sg[2], mic, mic_len); + /* Decryption followed by authentication */ + b_0[14] = (j >> 8) & 0xff; + b_0[15] = j & 0xff; @@ -166,7 +157,10 @@ + } + crypto_cipher_encrypt_one(tfm, a, a); + } -+ + +- aead_request_set_tfm(aead_req, tfm); +- aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0); +- aead_request_set_ad(aead_req, sg[0].length); + for (i = 0; i < mic_len; i++) { + if ((mic[i] ^ s_0[i]) != a[i]) + return -1; @@ -185,12 +179,12 @@ { - struct crypto_aead *tfm; - int err; -+ struct crypto_cipher *tfm; - +- - tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) - return tfm; -- ++ struct crypto_cipher *tfm; + - err = crypto_aead_setkey(tfm, key, key_len); - if (err) - goto free_aead; @@ -309,7 +303,7 @@ #endif /* AES_GMAC_H */ --- a/net/mac80211/key.h +++ b/net/mac80211/key.h -@@ -84,7 +84,7 @@ struct ieee80211_key { +@@ -88,7 +88,7 @@ struct ieee80211_key { * Management frames. */ u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN]; @@ -320,7 +314,7 @@ struct { --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c -@@ -307,7 +307,8 @@ ieee80211_crypto_tkip_decrypt(struct iee +@@ -304,7 +304,8 @@ ieee80211_crypto_tkip_decrypt(struct iee } @@ -330,7 +324,7 @@ { __le16 mask_fc; int a4_included, mgmt; -@@ -337,14 +338,8 @@ static void ccmp_special_blocks(struct s +@@ -334,14 +335,8 @@ static void ccmp_special_blocks(struct s else qos_tid = 0; @@ -347,7 +341,7 @@ /* Nonce: Nonce Flags | A2 | PN * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7) -@@ -352,6 +347,8 @@ static void ccmp_special_blocks(struct s +@@ -349,6 +344,8 @@ static void ccmp_special_blocks(struct s b_0[1] = qos_tid | (mgmt << 4); memcpy(&b_0[2], hdr->addr2, ETH_ALEN); memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN); @@ -356,7 +350,7 @@ /* AAD (extra authenticate-only data) / masked 802.11 header * FC | A1 | A2 | A3 | SC | [A4] | [QC] */ -@@ -463,7 +460,7 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -460,7 +457,7 @@ static int ccmp_encrypt_skb(struct ieee8 return 0; pos += IEEE80211_CCMP_HDR_LEN; @@ -365,7 +359,7 @@ ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len, skb_put(skb, mic_len), mic_len); -@@ -534,7 +531,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee +@@ -537,7 +534,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee u8 aad[2 * AES_BLOCK_SIZE]; u8 b_0[AES_BLOCK_SIZE]; /* hardware didn't decrypt/verify MIC */ diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch index d1d9fbd9b1..3ca166ff45 100644 --- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch +++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch @@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph +@@ -850,7 +850,6 @@ static int ieee80211_stop_ap(struct wiph sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; __sta_info_flush(sdata, true); diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch index 2855a88af7..3029598437 100644 --- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch +++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch @@ -18,7 +18,7 @@ static int ieee80211_ifa6_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -1087,14 +1087,14 @@ int ieee80211_register_hw(struct ieee802 +@@ -1089,14 +1089,14 @@ int ieee80211_register_hw(struct ieee802 rtnl_unlock(); @@ -35,7 +35,7 @@ local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; result = register_inet6addr_notifier(&local->ifa6_notifier); if (result) -@@ -1103,13 +1103,13 @@ int ieee80211_register_hw(struct ieee802 +@@ -1105,13 +1105,13 @@ int ieee80211_register_hw(struct ieee802 return 0; @@ -52,7 +52,7 @@ fail_ifa: #endif rtnl_lock(); -@@ -1137,10 +1137,10 @@ void ieee80211_unregister_hw(struct ieee +@@ -1139,10 +1139,10 @@ void ieee80211_unregister_hw(struct ieee tasklet_kill(&local->tx_pending_tasklet); tasklet_kill(&local->tasklet); diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch index a99cbd2bee..29f05c44d6 100644 --- a/package/kernel/mac80211/patches/210-ap_scan.patch +++ b/package/kernel/mac80211/patches/210-ap_scan.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -1999,7 +1999,7 @@ static int ieee80211_scan(struct wiphy * +@@ -2008,7 +2008,7 @@ static int ieee80211_scan(struct wiphy * * the frames sent while scanning on other channel will be * lost) */ diff --git a/package/kernel/mac80211/patches/302-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch b/package/kernel/mac80211/patches/302-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch new file mode 100644 index 0000000000..7caa9be5a8 --- /dev/null +++ b/package/kernel/mac80211/patches/302-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch @@ -0,0 +1,37 @@ +From: Felix Fietkau +Date: Sat, 14 May 2016 14:51:02 +0200 +Subject: [PATCH] Revert "ath9k: interpret requested txpower in EIRP + domain" + +This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411. +--- + +--- a/drivers/net/wireless/ath/ath9k/hw.c ++++ b/drivers/net/wireless/ath/ath9k/hw.c +@@ -2914,7 +2914,8 @@ void ath9k_hw_apply_txpower(struct ath_h + { + struct ath_regulatory *reg = ath9k_hw_regulatory(ah); + struct ieee80211_channel *channel; +- int chan_pwr, new_pwr; ++ int chan_pwr, new_pwr, max_gain; ++ int ant_gain, ant_reduction = 0; + + if (!chan) + return; +@@ -2922,10 +2923,15 @@ void ath9k_hw_apply_txpower(struct ath_h + channel = chan->chan; + chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER); + new_pwr = min_t(int, chan_pwr, reg->power_limit); ++ max_gain = chan_pwr - new_pwr + channel->max_antenna_gain * 2; ++ ++ ant_gain = get_antenna_gain(ah, chan); ++ if (ant_gain > max_gain) ++ ant_reduction = ant_gain - max_gain; + + ah->eep_ops->set_txpower(ah, chan, + ath9k_regd_get_ctl(reg, chan), +- get_antenna_gain(ah, chan), new_pwr, test); ++ ant_reduction, new_pwr, test); + } + + void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) diff --git a/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch b/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch deleted file mode 100644 index 22b987aa7a..0000000000 --- a/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch +++ /dev/null @@ -1,95 +0,0 @@ -From: Felix Fietkau -Date: Thu, 14 Jan 2016 03:14:03 +0100 -Subject: [PATCH] ath9k_hw: add low power tx gain table for AR953x - -Used in some newer TP-Link AR9533 devices. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c -@@ -698,6 +698,9 @@ static void ar9003_tx_gain_table_mode2(s - else if (AR_SREV_9340(ah)) - INIT_INI_ARRAY(&ah->iniModesTxGain, - ar9340Modes_low_ob_db_tx_gain_table_1p0); -+ else if (AR_SREV_9531_11(ah)) -+ INIT_INI_ARRAY(&ah->iniModesTxGain, -+ qca953x_1p1_modes_no_xpa_low_power_tx_gain_table); - else if (AR_SREV_9485_11_OR_LATER(ah)) - INIT_INI_ARRAY(&ah->iniModesTxGain, - ar9485Modes_low_ob_db_tx_gain_1_1); ---- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h -+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h -@@ -757,6 +757,71 @@ static const u32 qca953x_1p1_modes_xpa_t - {0x00016448, 0x6c927a70}, - }; - -+static const u32 qca953x_1p1_modes_no_xpa_low_power_tx_gain_table[][2] = { -+ /* Addr allmodes */ -+ {0x0000a2dc, 0xfff55592}, -+ {0x0000a2e0, 0xfff99924}, -+ {0x0000a2e4, 0xfffe1e00}, -+ {0x0000a2e8, 0xffffe000}, -+ {0x0000a410, 0x000050d6}, -+ {0x0000a500, 0x00000069}, -+ {0x0000a504, 0x0400006b}, -+ {0x0000a508, 0x0800006d}, -+ {0x0000a50c, 0x0c000269}, -+ {0x0000a510, 0x1000026b}, -+ {0x0000a514, 0x1400026d}, -+ {0x0000a518, 0x18000669}, -+ {0x0000a51c, 0x1c00066b}, -+ {0x0000a520, 0x1d000a68}, -+ {0x0000a524, 0x21000a6a}, -+ {0x0000a528, 0x25000a6c}, -+ {0x0000a52c, 0x29000a6e}, -+ {0x0000a530, 0x2d0012a9}, -+ {0x0000a534, 0x310012ab}, -+ {0x0000a538, 0x350012ad}, -+ {0x0000a53c, 0x39001b0a}, -+ {0x0000a540, 0x3d001b0c}, -+ {0x0000a544, 0x41001b0e}, -+ {0x0000a548, 0x43001bae}, -+ {0x0000a54c, 0x45001914}, -+ {0x0000a550, 0x47001916}, -+ {0x0000a554, 0x49001b96}, -+ {0x0000a558, 0x49001b96}, -+ {0x0000a55c, 0x49001b96}, -+ {0x0000a560, 0x49001b96}, -+ {0x0000a564, 0x49001b96}, -+ {0x0000a568, 0x49001b96}, -+ {0x0000a56c, 0x49001b96}, -+ {0x0000a570, 0x49001b96}, -+ {0x0000a574, 0x49001b96}, -+ {0x0000a578, 0x49001b96}, -+ {0x0000a57c, 0x49001b96}, -+ {0x0000a600, 0x00000000}, -+ {0x0000a604, 0x00000000}, -+ {0x0000a608, 0x00000000}, -+ {0x0000a60c, 0x00000000}, -+ {0x0000a610, 0x00000000}, -+ {0x0000a614, 0x00000000}, -+ {0x0000a618, 0x00804201}, -+ {0x0000a61c, 0x01408201}, -+ {0x0000a620, 0x01408502}, -+ {0x0000a624, 0x01408502}, -+ {0x0000a628, 0x01408502}, -+ {0x0000a62c, 0x01408502}, -+ {0x0000a630, 0x01408502}, -+ {0x0000a634, 0x01408502}, -+ {0x0000a638, 0x01408502}, -+ {0x0000a63c, 0x01408502}, -+ {0x0000b2dc, 0xfff55592}, -+ {0x0000b2e0, 0xfff99924}, -+ {0x0000b2e4, 0xfffe1e00}, -+ {0x0000b2e8, 0xffffe000}, -+ {0x00016044, 0x044922db}, -+ {0x00016048, 0x6c927a70}, -+ {0x00016444, 0x044922db}, -+ {0x00016448, 0x6c927a70}, -+}; -+ - static const u32 qca953x_2p0_baseband_core[][2] = { - /* Addr allmodes */ - {0x00009800, 0xafe68e30}, diff --git a/package/kernel/mac80211/patches/303-mac80211-mesh-flush-mesh-paths-unconditionally.patch b/package/kernel/mac80211/patches/303-mac80211-mesh-flush-mesh-paths-unconditionally.patch new file mode 100644 index 0000000000..518d0a31da --- /dev/null +++ b/package/kernel/mac80211/patches/303-mac80211-mesh-flush-mesh-paths-unconditionally.patch @@ -0,0 +1,146 @@ +From: Bob Copeland +Date: Sun, 15 May 2016 13:19:16 -0400 +Subject: [PATCH] mac80211: mesh: flush mesh paths unconditionally + +Currently, the mesh paths associated with a nexthop station are cleaned +up in the following code path: + + __sta_info_destroy_part1 + synchronize_net() + __sta_info_destroy_part2 + -> cleanup_single_sta + -> mesh_sta_cleanup + -> mesh_plink_deactivate + -> mesh_path_flush_by_nexthop + +However, there are a couple of problems here: + +1) the paths aren't flushed at all if the MPM is running in userspace + (e.g. when using wpa_supplicant or authsae) + +2) there is no synchronize_rcu between removing the path and readers + accessing the nexthop, which means the following race is possible: + +CPU0 CPU1 +~~~~ ~~~~ + sta_info_destroy_part1() + synchronize_net() +rcu_read_lock() +mesh_nexthop_resolve() + mpath = mesh_path_lookup() + [...] -> mesh_path_flush_by_nexthop() + sta = rcu_dereference( + mpath->next_hop) + kfree(sta) + access sta <-- CRASH + +Fix both of these by unconditionally flushing paths before destroying +the sta, and by adding a synchronize_net() after path flush to ensure +no active readers can still dereference the sta. + +Fixes this crash: + +[ 348.529295] BUG: unable to handle kernel paging request at 00020040 +[ 348.530014] IP: [] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] +[ 348.530014] *pde = 00000000 +[ 348.530014] Oops: 0000 [#1] PREEMPT +[ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] +[ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 +[ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 +[ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 +[ 348.530014] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 +[ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] +[ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 +[ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 +[ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 +[ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 +[ 348.530014] Stack: +[ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 +[ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 +[ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 +[ 348.530014] Call Trace: +[ 348.530014] [] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] +[ 348.530014] [] mesh_nexthop_resolve+0x34/0xd8 [mac80211] +[ 348.530014] [] ieee80211_xmit+0x92/0xc1 [mac80211] +[ 348.530014] [] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] +[ 348.530014] [] ? sch_direct_xmit+0xd7/0x1b3 +[ 348.530014] [] ? __local_bh_enable_ip+0x5d/0x7b +[ 348.530014] [] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] +[ 348.530014] [] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] +[ 348.530014] [] ? netif_skb_features+0x14d/0x30a +[ 348.530014] [] ieee80211_subif_start_xmit+0xa/0xe [mac80211] +[ 348.530014] [] dev_hard_start_xmit+0x1f8/0x267 +[ 348.530014] [] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 +[ 348.530014] [] sch_direct_xmit+0x8b/0x1b3 +[ 348.530014] [] __dev_queue_xmit+0x2c8/0x513 +[ 348.530014] [] dev_queue_xmit+0xa/0xc +[ 348.530014] [] batadv_send_skb_packet+0xd6/0xec [batman_adv] +[ 348.530014] [] batadv_send_unicast_skb+0x15/0x4a [batman_adv] +[ 348.530014] [] batadv_dat_send_data+0x27e/0x310 [batman_adv] +[ 348.530014] [] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] +[ 348.530014] [] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] +[ 348.530014] [] batadv_interface_tx+0x206/0x385 [batman_adv] +[ 348.530014] [] dev_hard_start_xmit+0x1f8/0x267 +[ 348.530014] [] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 +[ 348.530014] [] sch_direct_xmit+0x8b/0x1b3 +[ 348.530014] [] __dev_queue_xmit+0x2c8/0x513 +[ 348.530014] [] ? igb_xmit_frame+0x57/0x72 [igb] +[ 348.530014] [] dev_queue_xmit+0xa/0xc +[ 348.530014] [] br_dev_queue_push_xmit+0xeb/0xfb [bridge] +[ 348.530014] [] br_forward_finish+0x29/0x74 [bridge] +[ 348.530014] [] ? deliver_clone+0x3b/0x3b [bridge] +[ 348.530014] [] __br_forward+0x89/0xe7 [bridge] +[ 348.530014] [] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] +[ 348.530014] [] deliver_clone+0x34/0x3b [bridge] +[ 348.530014] [] ? br_flood+0x95/0x95 [bridge] +[ 348.530014] [] br_flood+0x77/0x95 [bridge] +[ 348.530014] [] br_flood_forward+0x13/0x1a [bridge] +[ 348.530014] [] ? br_flood+0x95/0x95 [bridge] +[ 348.530014] [] br_handle_frame_finish+0x392/0x3db [bridge] +[ 348.530014] [] ? nf_iterate+0x2b/0x6b +[ 348.530014] [] br_handle_frame+0x1e6/0x240 [bridge] +[ 348.530014] [] ? br_handle_local_finish+0x6a/0x6a [bridge] +[ 348.530014] [] __netif_receive_skb_core+0x43a/0x66b +[ 348.530014] [] ? br_handle_frame_finish+0x3db/0x3db [bridge] +[ 348.530014] [] ? resched_curr+0x19/0x37 +[ 348.530014] [] ? check_preempt_wakeup+0xbf/0xfe +[ 348.530014] [] ? ktime_get_with_offset+0x5c/0xfc +[ 348.530014] [] __netif_receive_skb+0x47/0x55 +[ 348.530014] [] netif_receive_skb_internal+0x40/0x5a +[ 348.530014] [] napi_gro_receive+0x3a/0x94 +[ 348.530014] [] igb_poll+0x6fd/0x9ad [igb] +[ 348.530014] [] ? swake_up_locked+0x14/0x26 +[ 348.530014] [] net_rx_action+0xde/0x250 +[ 348.530014] [] __do_softirq+0x8a/0x163 +[ 348.530014] [] ? __hrtimer_tasklet_trampoline+0x19/0x19 +[ 348.530014] [] do_softirq_own_stack+0x26/0x2c +[ 348.530014] +[ 348.530014] [] irq_exit+0x31/0x6f +[ 348.530014] [] do_IRQ+0x8d/0xa0 +[ 348.530014] [] common_interrupt+0x2c/0x40 +[ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 +[ 348.530014] EIP: [] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 +[ 348.530014] CR2: 0000000000020040 +[ 348.530014] ---[ end trace 48556ac26779732e ]--- +[ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt +[ 348.530014] Kernel Offset: disabled + +Cc: stable@vger.kernel.org +Reported-by: Fred Veldini +Tested-by: Fred Veldini +Signed-off-by: Bob Copeland +--- + +--- a/net/mac80211/mesh.c ++++ b/net/mac80211/mesh.c +@@ -161,6 +161,10 @@ void mesh_sta_cleanup(struct sta_info *s + del_timer_sync(&sta->mesh->plink_timer); + } + ++ /* make sure no readers can access nexthop sta from here on */ ++ mesh_path_flush_by_nexthop(sta); ++ synchronize_net(); ++ + if (changed) + ieee80211_mbss_info_change_notify(sdata, changed); + } diff --git a/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch b/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch deleted file mode 100644 index 7bb74353eb..0000000000 --- a/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch +++ /dev/null @@ -1,156 +0,0 @@ -From: Eli Cooper -Date: Thu, 14 Jan 2016 00:07:12 +0800 -Subject: [PATCH] rt2x00: fix monitor mode regression - -Since commit df1404650ccbfeb76a84f301f22316be0d00a864 monitor mode for rt2x00 -has been made effectively useless because the hardware filter is configured to -drop packets whose intended recipient is not the device, regardless of the -presence of monitor mode interfaces. - -This patch fixes this regression by adding explicit monitor mode support, and -configuring the hardware filter accordingly. - -Signed-off-by: Eli Cooper ---- - ---- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c -@@ -273,8 +273,10 @@ static void rt2400pci_config_filter(stru - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); -- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, -+ !rt2x00dev->is_monitoring && - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); ---- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c -@@ -274,8 +274,10 @@ static void rt2500pci_config_filter(stru - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); -- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, -+ !rt2x00dev->is_monitoring && - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, RXCSR0_DROP_MCAST, ---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -@@ -437,8 +437,10 @@ static void rt2500usb_config_filter(stru - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); -- rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, -+ !rt2x00dev->is_monitoring && - !rt2x00dev->intf_ap_count); - rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); - rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -1490,7 +1490,8 @@ void rt2800_config_filter(struct rt2x00_ - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); -- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -844,11 +844,13 @@ struct rt2x00_dev { - * - Open sta interface count. - * - Association count. - * - Beaconing enabled count. -+ * - Whether the device is monitoring. - */ - unsigned int intf_ap_count; - unsigned int intf_sta_count; - unsigned int intf_associated; - unsigned int intf_beaconing; -+ bool is_monitoring; - - /* - * Interface combinations ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c -@@ -244,6 +244,16 @@ void rt2x00lib_config(struct rt2x00_dev - (ieee80211_flags & IEEE80211_CONF_CHANGE_PS)) - cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); - -+ if (ieee80211_flags & IEEE80211_CONF_CHANGE_MONITOR) { -+ if (conf->flags & IEEE80211_CONF_MONITOR) { -+ rt2x00_dbg(rt2x00dev, "Monitor mode is enabled\n"); -+ rt2x00dev->is_monitoring = true; -+ } else { -+ rt2x00_dbg(rt2x00dev, "Monitor mode is disabled\n"); -+ rt2x00dev->is_monitoring = false; -+ } -+ } -+ - /* - * Start configuration. - */ ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1204,6 +1204,7 @@ int rt2x00lib_start(struct rt2x00_dev *r - rt2x00dev->intf_ap_count = 0; - rt2x00dev->intf_sta_count = 0; - rt2x00dev->intf_associated = 0; -+ rt2x00dev->is_monitoring = false; - - /* Enable the radio */ - retval = rt2x00lib_enable_radio(rt2x00dev); ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c -@@ -385,11 +385,6 @@ void rt2x00mac_configure_filter(struct i - *total_flags |= FIF_PSPOLL; - } - -- /* -- * Check if there is any work left for us. -- */ -- if (rt2x00dev->packet_filter == *total_flags) -- return; - rt2x00dev->packet_filter = *total_flags; - - rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); ---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c -@@ -530,8 +530,10 @@ static void rt61pci_config_filter(struct - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); -- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, -+ !rt2x00dev->is_monitoring && - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, ---- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c -@@ -480,8 +480,10 @@ static void rt73usb_config_filter(struct - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); -- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); -+ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, -+ !rt2x00dev->is_monitoring); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, -+ !rt2x00dev->is_monitoring && - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, diff --git a/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch b/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch deleted file mode 100644 index 049059aa24..0000000000 --- a/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 15 Jan 2016 18:17:17 +0800 -Subject: [PATCH] ath9k: avoid ANI restart if no trigger - -Fixes commit 54da20d83f0e ("ath9k_hw: improve ANI processing and rx desensitizing parameters") - -Call ath9k_ani_restart() only when the phy error rate reach the -ANI immunity threshold. Sync the logic with internal code base. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/ani.c -+++ b/drivers/net/wireless/ath/ath9k/ani.c -@@ -444,14 +444,16 @@ void ath9k_hw_ani_monitor(struct ath_hw - ofdmPhyErrRate < ah->config.ofdm_trig_low) { - ath9k_hw_ani_lower_immunity(ah); - aniState->ofdmsTurn = !aniState->ofdmsTurn; -+ ath9k_ani_restart(ah); - } else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) { - ath9k_hw_ani_ofdm_err_trigger(ah); - aniState->ofdmsTurn = false; -+ ath9k_ani_restart(ah); - } else if (cckPhyErrRate > ah->config.cck_trig_high) { - ath9k_hw_ani_cck_err_trigger(ah); - aniState->ofdmsTurn = true; -+ ath9k_ani_restart(ah); - } -- ath9k_ani_restart(ah); - } - } - EXPORT_SYMBOL(ath9k_hw_ani_monitor); diff --git a/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch b/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch deleted file mode 100644 index a1ac67c828..0000000000 --- a/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch +++ /dev/null @@ -1,91 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 15 Jan 2016 18:17:18 +0800 -Subject: [PATCH] ath9k: clean up ANI per-channel pointer checking - -commit c24bd3620c50 ("ath9k: Do not maintain ANI state per-channel") -removed per-channel handling, the code to check 'curchan' also -should be removed as never used. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/ani.c -+++ b/drivers/net/wireless/ath/ath9k/ani.c -@@ -126,12 +126,8 @@ static void ath9k_hw_update_mibstats(str - - static void ath9k_ani_restart(struct ath_hw *ah) - { -- struct ar5416AniState *aniState; -- -- if (!ah->curchan) -- return; -+ struct ar5416AniState *aniState = &ah->ani; - -- aniState = &ah->ani; - aniState->listenTime = 0; - - ENABLE_REGWRITE_BUFFER(ah); -@@ -221,12 +217,7 @@ static void ath9k_hw_set_ofdm_nil(struct - - static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah) - { -- struct ar5416AniState *aniState; -- -- if (!ah->curchan) -- return; -- -- aniState = &ah->ani; -+ struct ar5416AniState *aniState = &ah->ani; - - if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL) - ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false); -@@ -281,12 +272,7 @@ static void ath9k_hw_set_cck_nil(struct - - static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah) - { -- struct ar5416AniState *aniState; -- -- if (!ah->curchan) -- return; -- -- aniState = &ah->ani; -+ struct ar5416AniState *aniState = &ah->ani; - - if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL) - ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1, -@@ -299,9 +285,7 @@ static void ath9k_hw_ani_cck_err_trigger - */ - static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah) - { -- struct ar5416AniState *aniState; -- -- aniState = &ah->ani; -+ struct ar5416AniState *aniState = &ah->ani; - - /* lower OFDM noise immunity */ - if (aniState->ofdmNoiseImmunityLevel > 0 && -@@ -329,7 +313,7 @@ void ath9k_ani_reset(struct ath_hw *ah, - struct ath_common *common = ath9k_hw_common(ah); - int ofdm_nil, cck_nil; - -- if (!ah->curchan) -+ if (!chan) - return; - - BUG_ON(aniState == NULL); -@@ -416,14 +400,10 @@ static bool ath9k_hw_ani_read_counters(s - - void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan) - { -- struct ar5416AniState *aniState; -+ struct ar5416AniState *aniState = &ah->ani; - struct ath_common *common = ath9k_hw_common(ah); - u32 ofdmPhyErrRate, cckPhyErrRate; - -- if (!ah->curchan) -- return; -- -- aniState = &ah->ani; - if (!ath9k_hw_ani_read_counters(ah)) - return; - diff --git a/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch b/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch deleted file mode 100644 index cf8194aa33..0000000000 --- a/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 15 Jan 2016 18:17:19 +0800 -Subject: [PATCH] ath9k: do not reset while BB panic(0x4000409) on ar9561 - -BB panic(0x4000409) observed while AP enabling/disabling -bursting. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -2071,7 +2071,8 @@ void ar9003_hw_attach_phy_ops(struct ath - * to be disabled. - * - * 0x04000409: Packet stuck on receive. -- * Full chip reset is required for all chips except AR9340. -+ * Full chip reset is required for all chips except -+ * AR9340, AR9531 and AR9561. - */ - - /* -@@ -2100,7 +2101,7 @@ bool ar9003_hw_bb_watchdog_check(struct - case 0x04000b09: - return true; - case 0x04000409: -- if (AR_SREV_9340(ah) || AR_SREV_9531(ah)) -+ if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah)) - return false; - else - return true; diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch b/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch deleted file mode 100644 index 80b781ca54..0000000000 --- a/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 15 Jan 2016 18:17:20 +0800 -Subject: [PATCH] ath9k: fix inconsistent use of tab and space in - indentation - -Minor changes for indenting. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -@@ -5485,11 +5485,11 @@ unsigned int ar9003_get_paprd_scale_fact - AR9300_PAPRD_SCALE_1); - else { - if (chan->channel >= 5700) -- return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20), -- AR9300_PAPRD_SCALE_1); -+ return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20), -+ AR9300_PAPRD_SCALE_1); - else if (chan->channel >= 5400) - return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), -- AR9300_PAPRD_SCALE_2); -+ AR9300_PAPRD_SCALE_2); - else - return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), - AR9300_PAPRD_SCALE_1); diff --git a/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch deleted file mode 100644 index d4088664bf..0000000000 --- a/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 15 Jan 2016 18:17:21 +0800 -Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580 - -One crash issue be found on ar9300: RTC_RC reg read leads crash, leading -the data bus error, due to RTC_RC reg write not happen properly. - -Warm Reset trigger in continuous beacon stuck for one of the customer for -other chip, noticed the MAC was stuck in RTC reset. After analysis noticed -DMA did not complete when RTC was put in reset. - -So, before resetting the MAC need to make sure there are no pending DMA -transactions because this reset does not reset all parts of the chip. - -The 12th and 11th bit of MAC _DMA_CFG register used to do that. - 12 cfg_halt_ack 0x0 - 0 DMA has not yet halted - 1 DMA has halted - 11 cfg_halt_req 0x0 - 0 DMA logic operates normally - 1 Request DMA logic to stop so software can reset the MAC - -The Bit [12] of this register indicates when the halt has taken effect or -not. the DMA halt IS NOT recoverable; once software sets bit [11] to -request a DMA halt, software must wait for bit [12] to be set and reset -the MAC. - -So, the same thing we implemented for ar9580 chip. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at - if (ath9k_hw_mci_is_enabled(ah)) - ar9003_mci_check_gpm_offset(ah); - -+ /* DMA HALT added to resolve ar9300 and ar9580 bus error during -+ * RTC_RC reg read -+ */ -+ if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) { -+ REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); -+ ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK, -+ 20 * AH_WAIT_TIMEOUT); -+ REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); -+ } -+ - REG_WRITE(ah, AR_RTC_RC, rst_flags); - - REGWRITE_BUFFER_FLUSH(ah); ---- a/drivers/net/wireless/ath/ath9k/reg.h -+++ b/drivers/net/wireless/ath/ath9k/reg.h -@@ -34,8 +34,10 @@ - #define AR_CFG_SWRG 0x00000010 - #define AR_CFG_AP_ADHOC_INDICATION 0x00000020 - #define AR_CFG_PHOK 0x00000100 --#define AR_CFG_CLK_GATE_DIS 0x00000400 - #define AR_CFG_EEBS 0x00000200 -+#define AR_CFG_CLK_GATE_DIS 0x00000400 -+#define AR_CFG_HALT_REQ 0x00000800 -+#define AR_CFG_HALT_ACK 0x00001000 - #define AR_CFG_PCI_MASTER_REQ_Q_THRESH 0x00060000 - #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17 - diff --git a/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch b/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch deleted file mode 100644 index d9511c8d5f..0000000000 --- a/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch +++ /dev/null @@ -1,19 +0,0 @@ -From: Felix Fietkau -Date: Fri, 15 Jan 2016 15:59:45 +0100 -Subject: [PATCH] brcmfmac: add missing include - -linux/module.h is required for defining module parameters - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -17,6 +17,7 @@ - #include - #include - #include -+#include - #include - #include - #include "core.h" diff --git a/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch b/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch deleted file mode 100644 index 711e019e2b..0000000000 --- a/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch +++ /dev/null @@ -1,118 +0,0 @@ -From: Hante Meuleman -Date: Tue, 19 Jan 2016 12:39:24 +0100 -Subject: [PATCH] brcmfmac: fix sdio sg table alloc crash - -With commit 7d34b0560567 ("brcmfmac: Move all module parameters to -one place") a bug was introduced causing a null pointer exception. -This patch fixes the bug by initializing the sg table till after -the settings have been initialized. - -Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") -Reported-by: Marc Zyngier -Tested-by: Marc Zyngier -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -@@ -879,11 +879,24 @@ int brcmf_sdiod_abort(struct brcmf_sdio_ - return 0; - } - --static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) -+void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) - { -+ struct sdio_func *func; -+ struct mmc_host *host; -+ uint max_blocks; - uint nents; - int err; - -+ func = sdiodev->func[2]; -+ host = func->card->host; -+ sdiodev->sg_support = host->max_segs > 1; -+ max_blocks = min_t(uint, host->max_blk_count, 511u); -+ sdiodev->max_request_size = min_t(uint, host->max_req_size, -+ max_blocks * func->cur_blksize); -+ sdiodev->max_segment_count = min_t(uint, host->max_segs, -+ SG_MAX_SINGLE_ALLOC); -+ sdiodev->max_segment_size = host->max_seg_size; -+ - if (!sdiodev->sg_support) - return; - -@@ -1021,9 +1034,6 @@ static void brcmf_sdiod_host_fixup(struc - - static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) - { -- struct sdio_func *func; -- struct mmc_host *host; -- uint max_blocks; - int ret = 0; - - sdiodev->num_funcs = 2; -@@ -1054,26 +1064,6 @@ static int brcmf_sdiod_probe(struct brcm - goto out; - } - -- /* -- * determine host related variables after brcmf_sdiod_probe() -- * as func->cur_blksize is properly set and F2 init has been -- * completed successfully. -- */ -- func = sdiodev->func[2]; -- host = func->card->host; -- sdiodev->sg_support = host->max_segs > 1; -- max_blocks = min_t(uint, host->max_blk_count, 511u); -- sdiodev->max_request_size = min_t(uint, host->max_req_size, -- max_blocks * func->cur_blksize); -- sdiodev->max_segment_count = min_t(uint, host->max_segs, -- SG_MAX_SINGLE_ALLOC); -- sdiodev->max_segment_size = host->max_seg_size; -- -- /* allocate scatter-gather table. sg support -- * will be disabled upon allocation failure. -- */ -- brcmf_sdiod_sgtable_alloc(sdiodev); -- - ret = brcmf_sdiod_freezer_attach(sdiodev); - if (ret) - goto out; -@@ -1084,7 +1074,7 @@ static int brcmf_sdiod_probe(struct brcm - ret = -ENODEV; - goto out; - } -- brcmf_sdiod_host_fixup(host); -+ brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host); - out: - if (ret) - brcmf_sdiod_remove(sdiodev); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -4114,6 +4114,11 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - goto fail; - } - -+ /* allocate scatter-gather table. sg support -+ * will be disabled upon allocation failure. -+ */ -+ brcmf_sdiod_sgtable_alloc(bus->sdiodev); -+ - /* Query the F2 block size, set roundup accordingly */ - bus->blocksize = bus->sdiodev->func[2]->cur_blksize; - bus->roundup = min(max_roundup, bus->blocksize); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -@@ -342,6 +342,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_ - - /* Issue an abort to the specified function */ - int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); -+void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev); - void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, - enum brcmf_sdiod_state state); - #ifdef CONFIG_PM_SLEEP diff --git a/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch b/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch deleted file mode 100644 index 287d6e13bd..0000000000 --- a/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: Felix Fietkau -Date: Thu, 21 Jan 2016 16:28:44 +0100 -Subject: [PATCH] ath9k_hw: ignore eeprom magic mismatch on flash based devices - -Many AR913x based devices (maybe others too) do not have a valid EEPROM -magic in their calibration data partition. - -Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping") -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom.c -@@ -150,18 +150,18 @@ int ath9k_hw_nvram_swap_data(struct ath_ - return -EIO; - } - -- if (magic == AR5416_EEPROM_MAGIC) { -- *swap_needed = false; -- } else if (swab16(magic) == AR5416_EEPROM_MAGIC) { -+ *swap_needed = false; -+ if (swab16(magic) == AR5416_EEPROM_MAGIC) { - if (ah->ah_flags & AH_NO_EEP_SWAP) { - ath_info(common, - "Ignoring endianness difference in EEPROM magic bytes.\n"); -- -- *swap_needed = false; - } else { - *swap_needed = true; - } -- } else { -+ } else if (magic != AR5416_EEPROM_MAGIC) { -+ if (ath9k_hw_use_flash(ah)) -+ return 0; -+ - ath_err(common, - "Invalid EEPROM Magic (0x%04x).\n", magic); - return -EINVAL; diff --git a/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch b/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch deleted file mode 100644 index 070efa98e8..0000000000 --- a/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch +++ /dev/null @@ -1,55 +0,0 @@ -From: Felix Fietkau -Date: Fri, 22 Jan 2016 01:05:56 +0100 -Subject: [PATCH] ath9k: do not limit the number of DFS interfaces to 1 - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -751,14 +751,6 @@ static const struct ieee80211_iface_comb - - #endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */ - --static const struct ieee80211_iface_limit if_dfs_limits[] = { -- { .max = 1, .types = BIT(NL80211_IFTYPE_AP) | --#ifdef CPTCFG_MAC80211_MESH -- BIT(NL80211_IFTYPE_MESH_POINT) | --#endif -- BIT(NL80211_IFTYPE_ADHOC) }, --}; -- - static const struct ieee80211_iface_combination if_comb[] = { - { - .limits = if_limits, -@@ -766,6 +758,11 @@ static const struct ieee80211_iface_comb - .max_interfaces = 2048, - .num_different_channels = 1, - .beacon_int_infra_match = true, -+#ifdef CPTCFG_ATH9K_DFS_CERTIFIED -+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | -+ BIT(NL80211_CHAN_WIDTH_20) | -+ BIT(NL80211_CHAN_WIDTH_40), -+#endif - }, - { - .limits = wds_limits, -@@ -774,18 +771,6 @@ static const struct ieee80211_iface_comb - .num_different_channels = 1, - .beacon_int_infra_match = true, - }, --#ifdef CPTCFG_ATH9K_DFS_CERTIFIED -- { -- .limits = if_dfs_limits, -- .n_limits = ARRAY_SIZE(if_dfs_limits), -- .max_interfaces = 1, -- .num_different_channels = 1, -- .beacon_int_infra_match = true, -- .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | -- BIT(NL80211_CHAN_WIDTH_20) | -- BIT(NL80211_CHAN_WIDTH_40), -- } --#endif - }; - - #ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT diff --git a/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch b/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch deleted file mode 100644 index 61cafc7625..0000000000 --- a/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Michal Kazior -Date: Thu, 21 Jan 2016 14:23:07 +0100 -Subject: [PATCH] mac80211: fix txq queue related crashes - -The driver can access the queue simultanously -while mac80211 tears down the interface. Without -spinlock protection this could lead to corrupting -sk_buff_head and subsequently to an invalid -pointer dereference. - -Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") -Signed-off-by: Michal Kazior ---- - ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -977,7 +977,10 @@ static void ieee80211_do_stop(struct iee - if (sdata->vif.txq) { - struct txq_info *txqi = to_txq_info(sdata->vif.txq); - -+ spin_lock_bh(&txqi->queue.lock); - ieee80211_purge_tx_queue(&local->hw, &txqi->queue); -+ spin_unlock_bh(&txqi->queue.lock); -+ - atomic_set(&sdata->txqs_len[txqi->txq.ac], 0); - } - diff --git a/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch b/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch deleted file mode 100644 index 844d43bfc7..0000000000 --- a/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: Michal Kazior -Date: Mon, 25 Jan 2016 14:43:24 +0100 -Subject: [PATCH] mac80211: fix unnecessary frame drops in mesh fwding - -The ieee80211_queue_stopped() expects hw queue -number but it was given raw WMM AC number instead. - -This could cause frame drops and problems with -traffic in some cases - most notably if driver -doesn't map AC numbers to queue numbers 1:1 and -uses ieee80211_stop_queues() and -ieee80211_wake_queue() only without ever calling -ieee80211_wake_queues(). - -On ath10k it was possible to hit this problem in -the following case: - - 1. wlan0 uses queue 0 - (ath10k maps queues per vif) - 2. offchannel uses queue 15 - 3. queues 1-14 are unused - 4. ieee80211_stop_queues() - 5. ieee80211_wake_queue(q=0) - 6. ieee80211_wake_queue(q=15) - (other queues are not woken up because both - driver and mac80211 know other queues are - unused) - 7. ieee80211_rx_h_mesh_fwding() - 8. ieee80211_select_queue_80211() returns 2 - 9. ieee80211_queue_stopped(q=2) returns true - 10. frame is dropped (oops!) - -Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") -Signed-off-by: Michal Kazior ---- - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -2235,7 +2235,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 - struct ieee80211_local *local = rx->local; - struct ieee80211_sub_if_data *sdata = rx->sdata; - struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; -- u16 q, hdrlen; -+ u16 ac, q, hdrlen; - - hdr = (struct ieee80211_hdr *) skb->data; - hdrlen = ieee80211_hdrlen(hdr->frame_control); -@@ -2304,7 +2304,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 - ether_addr_equal(sdata->vif.addr, hdr->addr3)) - return RX_CONTINUE; - -- q = ieee80211_select_queue_80211(sdata, skb, hdr); -+ ac = ieee80211_select_queue_80211(sdata, skb, hdr); -+ q = sdata->vif.hw_queue[ac]; - if (ieee80211_queue_stopped(&local->hw, q)) { - IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion); - return RX_DROP_MONITOR; diff --git a/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch b/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch deleted file mode 100644 index 5b3efbdc5a..0000000000 --- a/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch +++ /dev/null @@ -1,103 +0,0 @@ -From: Sachin Kulkarni -Date: Tue, 12 Jan 2016 14:30:19 +0530 -Subject: [PATCH] mac80211: Requeue work after scan complete for all VIF - types. - -During a sw scan ieee80211_iface_work ignores work items for all vifs. -However after the scan complete work is requeued only for STA, ADHOC -and MESH iftypes. - -This occasionally results in event processing getting delayed/not -processed for iftype AP when it coexists with a STA. This can result -in data halt and eventually disconnection on the AP interface. - -Signed-off-by: Sachin Kulkarni -Cc: linux-wireless@vger.kernel.org -Cc: johannes@sipsolutions.net ---- - ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -1731,7 +1731,6 @@ void ieee80211_ibss_notify_scan_complete - if (sdata->vif.type != NL80211_IFTYPE_ADHOC) - continue; - sdata->u.ibss.last_scan_completed = jiffies; -- ieee80211_queue_work(&local->hw, &sdata->work); - } - mutex_unlock(&local->iflist_mtx); - } ---- a/net/mac80211/mesh.c -+++ b/net/mac80211/mesh.c -@@ -1369,17 +1369,6 @@ out: - sdata_unlock(sdata); - } - --void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) --{ -- struct ieee80211_sub_if_data *sdata; -- -- rcu_read_lock(); -- list_for_each_entry_rcu(sdata, &local->interfaces, list) -- if (ieee80211_vif_is_mesh(&sdata->vif) && -- ieee80211_sdata_running(sdata)) -- ieee80211_queue_work(&local->hw, &sdata->work); -- rcu_read_unlock(); --} - - void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) - { ---- a/net/mac80211/mesh.h -+++ b/net/mac80211/mesh.h -@@ -362,14 +362,10 @@ static inline bool mesh_path_sel_is_hwmp - return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP; - } - --void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local); -- - void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata); - void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata); - void ieee80211s_stop(void); - #else --static inline void --ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {} - static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata) - { return false; } - static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata) ---- a/net/mac80211/mlme.c -+++ b/net/mac80211/mlme.c -@@ -3978,8 +3978,6 @@ static void ieee80211_restart_sta_timer( - if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) - ieee80211_queue_work(&sdata->local->hw, - &sdata->u.mgd.monitor_work); -- /* and do all the other regular work too */ -- ieee80211_queue_work(&sdata->local->hw, &sdata->work); - } - } - ---- a/net/mac80211/scan.c -+++ b/net/mac80211/scan.c -@@ -314,6 +314,7 @@ static void __ieee80211_scan_completed(s - bool was_scanning = local->scanning; - struct cfg80211_scan_request *scan_req; - struct ieee80211_sub_if_data *scan_sdata; -+ struct ieee80211_sub_if_data *sdata; - - lockdep_assert_held(&local->mtx); - -@@ -373,7 +374,15 @@ static void __ieee80211_scan_completed(s - - ieee80211_mlme_notify_scan_completed(local); - ieee80211_ibss_notify_scan_completed(local); -- ieee80211_mesh_notify_scan_completed(local); -+ -+ /* Requeue all the work that might have been ignored while -+ * the scan was in progress -+ */ -+ list_for_each_entry_rcu(sdata, &local->interfaces, list) { -+ if (ieee80211_sdata_running(sdata)) -+ ieee80211_queue_work(&sdata->local->hw, &sdata->work); -+ } -+ - if (was_scanning) - ieee80211_start_next_roc(local); - } diff --git a/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch b/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch deleted file mode 100644 index 52fecb96b0..0000000000 --- a/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: Sara Sharon -Date: Mon, 25 Jan 2016 15:46:35 +0200 -Subject: [PATCH] mac80211: fix ibss scan parameters - -When joining IBSS a full scan should be initiated in order to search -for existing cell, unless the fixed_channel parameter was set. -A default channel to create the IBSS on if no cell was found is -provided as well. -However - a scan is initiated only on the default channel provided -regardless of whether ifibss->fixed_channel is set or not, with the -obvious result of the cell not joining existing IBSS cell that is -on another channel. - -Fixes: 76bed0f43b27 ("mac80211: IBSS fix scan request") -Signed-off-by: Sara Sharon -Signed-off-by: Emmanuel Grumbach ---- - ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -7,6 +7,7 @@ - * Copyright 2007, Michael Wu - * Copyright 2009, Johannes Berg - * Copyright 2013-2014 Intel Mobile Communications GmbH -+ * Copyright(c) 2016 Intel Deutschland GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as -@@ -1483,14 +1484,21 @@ static void ieee80211_sta_find_ibss(stru - - sdata_info(sdata, "Trigger new scan to find an IBSS to join\n"); - -- num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy, -- &ifibss->chandef, -- channels, -- ARRAY_SIZE(channels)); - scan_width = cfg80211_chandef_to_scan_width(&ifibss->chandef); -- ieee80211_request_ibss_scan(sdata, ifibss->ssid, -- ifibss->ssid_len, channels, num, -- scan_width); -+ -+ if (ifibss->fixed_channel) { -+ num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy, -+ &ifibss->chandef, -+ channels, -+ ARRAY_SIZE(channels)); -+ ieee80211_request_ibss_scan(sdata, ifibss->ssid, -+ ifibss->ssid_len, channels, -+ num, scan_width); -+ } else { -+ ieee80211_request_ibss_scan(sdata, ifibss->ssid, -+ ifibss->ssid_len, NULL, -+ 0, scan_width); -+ } - } else { - int interval = IEEE80211_SCAN_INTERVAL; - diff --git a/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch b/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch deleted file mode 100644 index e78df36600..0000000000 --- a/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: Chris Bainbridge -Date: Wed, 27 Jan 2016 15:46:18 +0000 -Subject: [PATCH] net/mac80211/agg-rx.c: fix use of uninitialised values - -Use kzalloc instead of kmalloc for struct tid_ampdu_rx. Fixes: - -[ 7.976605] UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29 -[ 7.976608] load of value 2 is not a valid value for type '_Bool' -[ 7.976611] CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265 -[ 7.976613] Hardware name: Apple Inc. MacBookPro10,2/Mac-AFD8A9D944EA4843, BIOS MBP102.88Z.0106.B0A.1509130955 09/13/2015 -[ 7.976616] Workqueue: phy0 rt2x00usb_work_rxdone -[ 7.976619] 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007 -[ 7.976622] ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500 -[ 7.976626] ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032 -[ 7.976629] Call Trace: -[ 7.976633] [] dump_stack+0x45/0x5f -[ 7.976637] [] ubsan_epilogue+0xd/0x40 -[ 7.976642] [] __ubsan_handle_load_invalid_value+0x67/0x70 -[ 7.976646] [] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730 -[ 7.976650] [] ieee80211_prepare_and_rx_handle+0xd04/0x1c00 -[ 7.976654] [] ? usb_hcd_map_urb_for_dma+0x65e/0x960 -[ 7.976659] [] __ieee80211_rx_handle_packet+0x1f3/0x750 -[ 7.976663] [] ieee80211_rx_napi+0x447/0x990 -[ 7.976667] [] rt2x00lib_rxdone+0x305/0xbd0 -[ 7.976670] [] ? dequeue_task_fair+0x64f/0x1de0 -[ 7.976674] [] ? sched_clock_cpu+0xe6/0x150 -[ 7.976678] [] rt2x00usb_work_rxdone+0x7c/0x140 -[ 7.976682] [] process_one_work+0x226/0x860 -[ 7.976686] [] worker_thread+0x5c/0x680 -[ 7.976690] [] ? process_one_work+0x860/0x860 -[ 7.976693] [] kthread+0xf6/0x150 -[ 7.976697] [] ? kthread_worker_fn+0x310/0x310 -[ 7.976700] [] ret_from_fork+0x3f/0x70 -[ 7.976703] [] ? kthread_worker_fn+0x310/0x310 - -Link: https://lkml.org/lkml/2016/1/26/230 -Signed-off-by: Chris Bainbridge ---- - ---- a/net/mac80211/agg-rx.c -+++ b/net/mac80211/agg-rx.c -@@ -327,7 +327,7 @@ void __ieee80211_start_rx_ba_session(str - } - - /* prepare A-MPDU MLME for Rx aggregation */ -- tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL); -+ tid_agg_rx = kzalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL); - if (!tid_agg_rx) - goto end; - diff --git a/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch b/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch deleted file mode 100644 index 5bf53b918c..0000000000 --- a/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: Konstantin Khlebnikov -Date: Fri, 29 Jan 2016 11:35:12 +0300 -Subject: [PATCH] mac80211: minstrel_ht: fix out-of-bound in - minstrel_ht_set_best_prob_rate - -Patch fixes this splat - -BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0 -[mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0 - -Signed-off-by: Konstantin Khlebnikov -Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -414,15 +414,16 @@ minstrel_ht_set_best_prob_rate(struct mi - (max_tp_group != MINSTREL_CCK_GROUP)) - return; - -+ max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES; -+ max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES; -+ max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma; -+ - if (mrs->prob_ewma > MINSTREL_FRAC(75, 100)) { - cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx, - mrs->prob_ewma); - if (cur_tp_avg > tmp_tp_avg) - mi->max_prob_rate = index; - -- max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES; -- max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES; -- max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma; - max_gpr_tp_avg = minstrel_ht_get_tp_avg(mi, max_gpr_group, - max_gpr_idx, - max_gpr_prob); -@@ -431,7 +432,7 @@ minstrel_ht_set_best_prob_rate(struct mi - } else { - if (mrs->prob_ewma > tmp_prob) - mi->max_prob_rate = index; -- if (mrs->prob_ewma > mg->rates[mg->max_group_prob_rate].prob_ewma) -+ if (mrs->prob_ewma > max_gpr_prob) - mg->max_group_prob_rate = index; - } - } diff --git a/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch b/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch deleted file mode 100644 index 655dc4bfa9..0000000000 --- a/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Felix Fietkau -Date: Tue, 2 Feb 2016 14:39:08 +0100 -Subject: [PATCH] mac80211: move A-MSDU skb_linearize call to - ieee80211_amsdu_to_8023s - -Prepararation for zero-copy A-MSDU support with page fragment SKBs - -Signed-off-by: Felix Fietkau -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -2203,9 +2203,6 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx - skb->dev = dev; - __skb_queue_head_init(&frame_list); - -- if (skb_linearize(skb)) -- return RX_DROP_UNUSABLE; -- - ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr, - rx->sdata->vif.type, - rx->local->hw.extra_tx_headroom, true); ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -657,6 +657,9 @@ void ieee80211_amsdu_to_8023s(struct sk_ - int remaining, err; - u8 dst[ETH_ALEN], src[ETH_ALEN]; - -+ if (skb_linearize(skb)) -+ goto out; -+ - if (has_80211_header) { - err = ieee80211_data_to_8023(skb, addr, iftype); - if (err) diff --git a/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch b/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch deleted file mode 100644 index b646ab36dd..0000000000 --- a/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch +++ /dev/null @@ -1,186 +0,0 @@ -From: Felix Fietkau -Date: Tue, 2 Feb 2016 14:39:09 +0100 -Subject: [PATCH] cfg80211: add function for 802.3 conversion with separate - output buffer - -Use skb_copy_bits in preparation for allowing fragmented skbs - -Signed-off-by: Felix Fietkau -Signed-off-by: Johannes Berg ---- - ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -393,9 +393,9 @@ unsigned int ieee80211_get_hdrlen_from_s - } - EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); - --unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) -+static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags) - { -- int ae = meshhdr->flags & MESH_FLAGS_AE; -+ int ae = flags & MESH_FLAGS_AE; - /* 802.11-2012, 8.2.4.7.3 */ - switch (ae) { - default: -@@ -407,21 +407,31 @@ unsigned int ieee80211_get_mesh_hdrlen(s - return 18; - } - } -+ -+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) -+{ -+ return __ieee80211_get_mesh_hdrlen(meshhdr->flags); -+} - EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); - --int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, -- enum nl80211_iftype iftype) -+static int __ieee80211_data_to_8023(struct sk_buff *skb, struct ethhdr *ehdr, -+ const u8 *addr, enum nl80211_iftype iftype) - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; -- u16 hdrlen, ethertype; -- u8 *payload; -- u8 dst[ETH_ALEN]; -- u8 src[ETH_ALEN] __aligned(2); -+ struct { -+ u8 hdr[ETH_ALEN] __aligned(2); -+ __be16 proto; -+ } payload; -+ struct ethhdr tmp; -+ u16 hdrlen; -+ u8 mesh_flags = 0; - - if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) - return -1; - - hdrlen = ieee80211_hdrlen(hdr->frame_control); -+ if (skb->len < hdrlen + 8) -+ return -1; - - /* convert IEEE 802.11 header + possible LLC headers into Ethernet - * header -@@ -432,8 +442,11 @@ int ieee80211_data_to_8023(struct sk_buf - * 1 0 BSSID SA DA n/a - * 1 1 RA TA DA SA - */ -- memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); -- memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); -+ memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN); -+ memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN); -+ -+ if (iftype == NL80211_IFTYPE_MESH_POINT) -+ skb_copy_bits(skb, hdrlen, &mesh_flags, 1); - - switch (hdr->frame_control & - cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { -@@ -450,44 +463,31 @@ int ieee80211_data_to_8023(struct sk_buf - iftype != NL80211_IFTYPE_STATION)) - return -1; - if (iftype == NL80211_IFTYPE_MESH_POINT) { -- struct ieee80211s_hdr *meshdr = -- (struct ieee80211s_hdr *) (skb->data + hdrlen); -- /* make sure meshdr->flags is on the linear part */ -- if (!pskb_may_pull(skb, hdrlen + 1)) -- return -1; -- if (meshdr->flags & MESH_FLAGS_AE_A4) -+ if (mesh_flags & MESH_FLAGS_AE_A4) - return -1; -- if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { -+ if (mesh_flags & MESH_FLAGS_AE_A5_A6) { - skb_copy_bits(skb, hdrlen + - offsetof(struct ieee80211s_hdr, eaddr1), -- dst, ETH_ALEN); -- skb_copy_bits(skb, hdrlen + -- offsetof(struct ieee80211s_hdr, eaddr2), -- src, ETH_ALEN); -+ tmp.h_dest, 2 * ETH_ALEN); - } -- hdrlen += ieee80211_get_mesh_hdrlen(meshdr); -+ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); - } - break; - case cpu_to_le16(IEEE80211_FCTL_FROMDS): - if ((iftype != NL80211_IFTYPE_STATION && - iftype != NL80211_IFTYPE_P2P_CLIENT && - iftype != NL80211_IFTYPE_MESH_POINT) || -- (is_multicast_ether_addr(dst) && -- ether_addr_equal(src, addr))) -+ (is_multicast_ether_addr(tmp.h_dest) && -+ ether_addr_equal(tmp.h_source, addr))) - return -1; - if (iftype == NL80211_IFTYPE_MESH_POINT) { -- struct ieee80211s_hdr *meshdr = -- (struct ieee80211s_hdr *) (skb->data + hdrlen); -- /* make sure meshdr->flags is on the linear part */ -- if (!pskb_may_pull(skb, hdrlen + 1)) -- return -1; -- if (meshdr->flags & MESH_FLAGS_AE_A5_A6) -+ if (mesh_flags & MESH_FLAGS_AE_A5_A6) - return -1; -- if (meshdr->flags & MESH_FLAGS_AE_A4) -+ if (mesh_flags & MESH_FLAGS_AE_A4) - skb_copy_bits(skb, hdrlen + - offsetof(struct ieee80211s_hdr, eaddr1), -- src, ETH_ALEN); -- hdrlen += ieee80211_get_mesh_hdrlen(meshdr); -+ tmp.h_source, ETH_ALEN); -+ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); - } - break; - case cpu_to_le16(0): -@@ -498,33 +498,33 @@ int ieee80211_data_to_8023(struct sk_buf - break; - } - -- if (!pskb_may_pull(skb, hdrlen + 8)) -- return -1; -- -- payload = skb->data + hdrlen; -- ethertype = (payload[6] << 8) | payload[7]; -+ skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)); -+ tmp.h_proto = payload.proto; - -- if (likely((ether_addr_equal(payload, rfc1042_header) && -- ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || -- ether_addr_equal(payload, bridge_tunnel_header))) { -+ if (likely((ether_addr_equal(payload.hdr, rfc1042_header) && -+ tmp.h_proto != htons(ETH_P_AARP) && -+ tmp.h_proto != htons(ETH_P_IPX)) || -+ ether_addr_equal(payload.hdr, bridge_tunnel_header))) - /* remove RFC1042 or Bridge-Tunnel encapsulation and - * replace EtherType */ -- skb_pull(skb, hdrlen + 6); -- memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); -- memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); -- } else { -- struct ethhdr *ehdr; -- __be16 len; -+ hdrlen += ETH_ALEN + 2; -+ else -+ tmp.h_proto = htons(skb->len); - -- skb_pull(skb, hdrlen); -- len = htons(skb->len); -+ pskb_pull(skb, hdrlen); -+ -+ if (!ehdr) - ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); -- memcpy(ehdr->h_dest, dst, ETH_ALEN); -- memcpy(ehdr->h_source, src, ETH_ALEN); -- ehdr->h_proto = len; -- } -+ memcpy(ehdr, &tmp, sizeof(tmp)); -+ - return 0; - } -+ -+int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, -+ enum nl80211_iftype iftype) -+{ -+ return __ieee80211_data_to_8023(skb, NULL, addr, iftype); -+} - EXPORT_SYMBOL(ieee80211_data_to_8023); - - int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, diff --git a/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch b/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch deleted file mode 100644 index 2eeed22af0..0000000000 --- a/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch +++ /dev/null @@ -1,159 +0,0 @@ -From: Felix Fietkau -Date: Tue, 2 Feb 2016 14:39:10 +0100 -Subject: [PATCH] cfg80211: add support for non-linear skbs in - ieee80211_amsdu_to_8023s - -Signed-off-by: Felix Fietkau -Signed-off-by: Johannes Berg ---- - ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -644,73 +644,75 @@ int ieee80211_data_from_8023(struct sk_b - } - EXPORT_SYMBOL(ieee80211_data_from_8023); - -+static struct sk_buff * -+__ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, -+ int offset, int len) -+{ -+ struct sk_buff *frame; -+ -+ if (skb->len - offset < len) -+ return NULL; -+ -+ /* -+ * Allocate and reserve two bytes more for payload -+ * alignment since sizeof(struct ethhdr) is 14. -+ */ -+ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len); -+ -+ skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); -+ skb_copy_bits(skb, offset, skb_put(frame, len), len); -+ -+ return frame; -+} - - void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, - const u8 *addr, enum nl80211_iftype iftype, - const unsigned int extra_headroom, - bool has_80211_header) - { -+ unsigned int hlen = ALIGN(extra_headroom, 4); - struct sk_buff *frame = NULL; - u16 ethertype; - u8 *payload; -- const struct ethhdr *eth; -- int remaining, err; -- u8 dst[ETH_ALEN], src[ETH_ALEN]; -- -- if (skb_linearize(skb)) -- goto out; -+ int offset = 0, remaining, err; -+ struct ethhdr eth; -+ bool reuse_skb = true; -+ bool last = false; - - if (has_80211_header) { -- err = ieee80211_data_to_8023(skb, addr, iftype); -+ err = __ieee80211_data_to_8023(skb, ð, addr, iftype); - if (err) - goto out; -- -- /* skip the wrapping header */ -- eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); -- if (!eth) -- goto out; -- } else { -- eth = (struct ethhdr *) skb->data; - } - -- while (skb != frame) { -+ while (!last) { -+ unsigned int subframe_len; -+ int len; - u8 padding; -- __be16 len = eth->h_proto; -- unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); -- -- remaining = skb->len; -- memcpy(dst, eth->h_dest, ETH_ALEN); -- memcpy(src, eth->h_source, ETH_ALEN); - -+ skb_copy_bits(skb, offset, ð, sizeof(eth)); -+ len = ntohs(eth.h_proto); -+ subframe_len = sizeof(struct ethhdr) + len; - padding = (4 - subframe_len) & 0x3; -+ - /* the last MSDU has no padding */ -+ remaining = skb->len - offset; - if (subframe_len > remaining) - goto purge; - -- skb_pull(skb, sizeof(struct ethhdr)); -+ offset += sizeof(struct ethhdr); - /* reuse skb for the last subframe */ -- if (remaining <= subframe_len + padding) -+ last = remaining <= subframe_len + padding; -+ if (!skb_is_nonlinear(skb) && last) { -+ skb_pull(skb, offset); - frame = skb; -- else { -- unsigned int hlen = ALIGN(extra_headroom, 4); -- /* -- * Allocate and reserve two bytes more for payload -- * alignment since sizeof(struct ethhdr) is 14. -- */ -- frame = dev_alloc_skb(hlen + subframe_len + 2); -+ reuse_skb = true; -+ } else { -+ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len); - if (!frame) - goto purge; - -- skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); -- memcpy(skb_put(frame, ntohs(len)), skb->data, -- ntohs(len)); -- -- eth = (struct ethhdr *)skb_pull(skb, ntohs(len) + -- padding); -- if (!eth) { -- dev_kfree_skb(frame); -- goto purge; -- } -+ offset += len + padding; - } - - skb_reset_network_header(frame); -@@ -719,24 +721,20 @@ void ieee80211_amsdu_to_8023s(struct sk_ - - payload = frame->data; - ethertype = (payload[6] << 8) | payload[7]; -- - if (likely((ether_addr_equal(payload, rfc1042_header) && - ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || - ether_addr_equal(payload, bridge_tunnel_header))) { -- /* remove RFC1042 or Bridge-Tunnel -- * encapsulation and replace EtherType */ -- skb_pull(frame, 6); -- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); -- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); -- } else { -- memcpy(skb_push(frame, sizeof(__be16)), &len, -- sizeof(__be16)); -- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); -- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); -+ eth.h_proto = htons(ethertype); -+ skb_pull(frame, ETH_ALEN + 2); - } -+ -+ memcpy(skb_push(frame, sizeof(eth)), ð, sizeof(eth)); - __skb_queue_tail(list, frame); - } - -+ if (!reuse_skb) -+ dev_kfree_skb(skb); -+ - return; - - purge: diff --git a/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch b/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch deleted file mode 100644 index c4155a1181..0000000000 --- a/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch +++ /dev/null @@ -1,155 +0,0 @@ -From: Sven Eckelmann -Date: Tue, 26 Jan 2016 17:11:13 +0100 -Subject: [PATCH] mac80211: Parse legacy and HT rate in injected frames - -Drivers/devices without their own rate control algorithm can get the -information what rates they should use from either the radiotap header of -injected frames or from the rate control algorithm. But the parsing of the -legacy rate information from the radiotap header was removed in commit -e6a9854b05c1 ("mac80211/drivers: rewrite the rate control API"). - -The removal of this feature heavily reduced the usefulness of frame -injection when wanting to simulate specific transmission behavior. Having -rate parsing together with MCS rates and retry support allows a fine -grained selection of the tx behavior of injected frames for these kind of -tests. - -Signed-off-by: Sven Eckelmann -Cc: Simon Wunderlich -Signed-off-by: Johannes Berg ---- - ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -708,12 +708,14 @@ enum mac80211_tx_info_flags { - * protocol frame (e.g. EAP) - * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll - * frame (PS-Poll or uAPSD). -+ * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information - * - * These flags are used in tx_info->control.flags. - */ - enum mac80211_tx_control_flags { - IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), - IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), -+ IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), - }; - - /* ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -710,6 +710,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021 - - info->control.short_preamble = txrc.short_preamble; - -+ /* don't ask rate control when rate already injected via radiotap */ -+ if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT) -+ return TX_CONTINUE; -+ - if (tx->sta) - assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); - -@@ -1665,15 +1669,24 @@ void ieee80211_xmit(struct ieee80211_sub - ieee80211_tx(sdata, sta, skb, false); - } - --static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb) -+static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local, -+ struct sk_buff *skb) - { - struct ieee80211_radiotap_iterator iterator; - struct ieee80211_radiotap_header *rthdr = - (struct ieee80211_radiotap_header *) skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -+ struct ieee80211_supported_band *sband = -+ local->hw.wiphy->bands[info->band]; - int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, - NULL); - u16 txflags; -+ u16 rate = 0; -+ bool rate_found = false; -+ u8 rate_retries = 0; -+ u16 rate_flags = 0; -+ u8 mcs_known, mcs_flags; -+ int i; - - info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | - IEEE80211_TX_CTL_DONTFRAG; -@@ -1724,6 +1737,35 @@ static bool ieee80211_parse_tx_radiotap( - info->flags |= IEEE80211_TX_CTL_NO_ACK; - break; - -+ case IEEE80211_RADIOTAP_RATE: -+ rate = *iterator.this_arg; -+ rate_flags = 0; -+ rate_found = true; -+ break; -+ -+ case IEEE80211_RADIOTAP_DATA_RETRIES: -+ rate_retries = *iterator.this_arg; -+ break; -+ -+ case IEEE80211_RADIOTAP_MCS: -+ mcs_known = iterator.this_arg[0]; -+ mcs_flags = iterator.this_arg[1]; -+ if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS)) -+ break; -+ -+ rate_found = true; -+ rate = iterator.this_arg[2]; -+ rate_flags = IEEE80211_TX_RC_MCS; -+ -+ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI && -+ mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) -+ rate_flags |= IEEE80211_TX_RC_SHORT_GI; -+ -+ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && -+ mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40) -+ rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; -+ break; -+ - /* - * Please update the file - * Documentation/networking/mac80211-injection.txt -@@ -1738,6 +1780,32 @@ static bool ieee80211_parse_tx_radiotap( - if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ - return false; - -+ if (rate_found) { -+ info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT; -+ -+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { -+ info->control.rates[i].idx = -1; -+ info->control.rates[i].flags = 0; -+ info->control.rates[i].count = 0; -+ } -+ -+ if (rate_flags & IEEE80211_TX_RC_MCS) { -+ info->control.rates[0].idx = rate; -+ } else { -+ for (i = 0; i < sband->n_bitrates; i++) { -+ if (rate * 5 != sband->bitrates[i].bitrate) -+ continue; -+ -+ info->control.rates[0].idx = i; -+ break; -+ } -+ } -+ -+ info->control.rates[0].flags = rate_flags; -+ info->control.rates[0].count = min_t(u8, rate_retries + 1, -+ local->hw.max_rate_tries); -+ } -+ - /* - * remove the radiotap header - * iterator->_max_length was sanity-checked against -@@ -1819,7 +1887,7 @@ netdev_tx_t ieee80211_monitor_start_xmit - IEEE80211_TX_CTL_INJECTED; - - /* process and remove the injection radiotap header */ -- if (!ieee80211_parse_tx_radiotap(skb)) -+ if (!ieee80211_parse_tx_radiotap(local, skb)) - goto fail; - - rcu_read_lock(); diff --git a/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch b/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch deleted file mode 100644 index e7bfb9c83d..0000000000 --- a/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch +++ /dev/null @@ -1,317 +0,0 @@ -From: Felix Fietkau -Date: Fri, 5 Feb 2016 01:38:51 +0100 -Subject: [PATCH] mac80211: add A-MSDU tx support - -Requires software tx queueing support. frag_list support (for zero-copy) -is optional. - -Signed-off-by: Felix Fietkau ---- - ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -709,6 +709,7 @@ enum mac80211_tx_info_flags { - * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll - * frame (PS-Poll or uAPSD). - * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information -+ * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame - * - * These flags are used in tx_info->control.flags. - */ -@@ -716,6 +717,7 @@ enum mac80211_tx_control_flags { - IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), - IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), - IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), -+ IEEE80211_TX_CTRL_AMSDU = BIT(3), - }; - - /* -@@ -1728,6 +1730,7 @@ struct ieee80211_sta_rates { - * size is min(max_amsdu_len, 7935) bytes. - * Both additional HT limits must be enforced by the low level driver. - * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2). -+ * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control. - * @txq: per-TID data TX queues (if driver uses the TXQ abstraction) - */ - struct ieee80211_sta { -@@ -1748,6 +1751,7 @@ struct ieee80211_sta { - bool mfp; - u8 max_amsdu_subframes; - u16 max_amsdu_len; -+ u16 max_rc_amsdu_len; - - struct ieee80211_txq *txq[IEEE80211_NUM_TIDS]; - -@@ -1961,6 +1965,15 @@ struct ieee80211_txq { - * order and does not need to manage its own reorder buffer or BA session - * timeout. - * -+ * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated -+ * A-MSDU frames. Requires software tx queueing and fast-xmit support. -+ * When not using minstrel/minstrel_ht rate control, the driver should -+ * limit the maximum A-MSDU size based on the current tx rate by setting -+ * max_rc_amsdu_len in struct ieee80211_sta. -+ * -+ * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list -+ * skbs, needed for zero-copy software A-MSDU. -+ * - * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays - */ - enum ieee80211_hw_flags { -@@ -1998,6 +2011,8 @@ enum ieee80211_hw_flags { - IEEE80211_HW_BEACON_TX_STATUS, - IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR, - IEEE80211_HW_SUPPORTS_REORDERING_BUFFER, -+ IEEE80211_HW_TX_AMSDU, -+ IEEE80211_HW_TX_FRAG_LIST, - - /* keep last, obviously */ - NUM_IEEE80211_HW_FLAGS -@@ -2070,6 +2085,9 @@ enum ieee80211_hw_flags { - * size is smaller (an example is LinkSys WRT120N with FW v1.0.07 - * build 002 Jun 18 2012). - * -+ * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum -+ * of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list. -+ * - * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX - * (if %IEEE80211_HW_QUEUE_CONTROL is set) - * -@@ -2124,6 +2142,7 @@ struct ieee80211_hw { - u8 max_rate_tries; - u8 max_rx_aggregation_subframes; - u8 max_tx_aggregation_subframes; -+ u8 max_tx_fragments; - u8 offchannel_tx_hw_queue; - u8 radiotap_mcs_details; - u16 radiotap_vht_details; ---- a/net/mac80211/agg-tx.c -+++ b/net/mac80211/agg-tx.c -@@ -935,6 +935,7 @@ void ieee80211_process_addba_resp(struct - size_t len) - { - struct tid_ampdu_tx *tid_tx; -+ struct ieee80211_txq *txq; - u16 capab, tid; - u8 buf_size; - bool amsdu; -@@ -945,6 +946,10 @@ void ieee80211_process_addba_resp(struct - buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6; - buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes); - -+ txq = sta->sta.txq[tid]; -+ if (!amsdu && txq) -+ set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags); -+ - mutex_lock(&sta->ampdu_mlme.mtx); - - tid_tx = rcu_dereference_protected_tid_tx(sta, tid); ---- a/net/mac80211/debugfs.c -+++ b/net/mac80211/debugfs.c -@@ -127,6 +127,8 @@ static const char *hw_flag_names[NUM_IEE - FLAG(BEACON_TX_STATUS), - FLAG(NEEDS_UNIQUE_STA_ADDR), - FLAG(SUPPORTS_REORDERING_BUFFER), -+ FLAG(TX_AMSDU), -+ FLAG(TX_FRAG_LIST), - - /* keep last for the build bug below */ - (void *)0x1 ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -799,6 +799,7 @@ struct mac80211_qos_map { - enum txq_info_flags { - IEEE80211_TXQ_STOP, - IEEE80211_TXQ_AMPDU, -+ IEEE80211_TXQ_NO_AMSDU, - }; - - struct txq_info { ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1318,6 +1318,10 @@ struct sk_buff *ieee80211_tx_dequeue(str - out: - spin_unlock_bh(&txqi->queue.lock); - -+ if (skb && skb_has_frag_list(skb) && -+ !ieee80211_hw_check(&local->hw, TX_FRAG_LIST)) -+ skb_linearize(skb); -+ - return skb; - } - EXPORT_SYMBOL(ieee80211_tx_dequeue); -@@ -2757,6 +2761,163 @@ void ieee80211_clear_fast_xmit(struct st - kfree_rcu(fast_tx, rcu_head); - } - -+static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local, -+ struct sk_buff *skb, int headroom, -+ int *subframe_len) -+{ -+ int amsdu_len = *subframe_len + sizeof(struct ethhdr); -+ int padding = (4 - amsdu_len) & 3; -+ -+ if (skb_headroom(skb) < headroom || skb_tailroom(skb) < padding) { -+ I802_DEBUG_INC(local->tx_expand_skb_head); -+ -+ if (pskb_expand_head(skb, headroom, padding, GFP_ATOMIC)) { -+ wiphy_debug(local->hw.wiphy, -+ "failed to reallocate TX buffer\n"); -+ return false; -+ } -+ } -+ -+ if (padding) { -+ *subframe_len += padding; -+ memset(skb_put(skb, padding), 0, padding); -+ } -+ -+ return true; -+} -+ -+static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata, -+ struct ieee80211_fast_tx *fast_tx, -+ struct sk_buff *skb) -+{ -+ struct ieee80211_local *local = sdata->local; -+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -+ struct ieee80211_hdr *hdr; -+ struct ethhdr amsdu_hdr; -+ int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header); -+ int subframe_len = skb->len - hdr_len; -+ void *data; -+ u8 *qc; -+ -+ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) -+ return false; -+ -+ if (info->control.flags & IEEE80211_TX_CTRL_AMSDU) -+ return true; -+ -+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(amsdu_hdr), -+ &subframe_len)) -+ return false; -+ -+ amsdu_hdr.h_proto = cpu_to_be16(subframe_len); -+ memcpy(amsdu_hdr.h_source, skb->data + fast_tx->sa_offs, ETH_ALEN); -+ memcpy(amsdu_hdr.h_dest, skb->data + fast_tx->da_offs, ETH_ALEN); -+ -+ data = skb_push(skb, sizeof(amsdu_hdr)); -+ memmove(data, data + sizeof(amsdu_hdr), hdr_len); -+ memcpy(data + hdr_len, &amsdu_hdr, sizeof(amsdu_hdr)); -+ -+ hdr = data; -+ qc = ieee80211_get_qos_ctl(hdr); -+ *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT; -+ -+ info->control.flags |= IEEE80211_TX_CTRL_AMSDU; -+ -+ return true; -+} -+ -+static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, -+ struct sta_info *sta, -+ struct ieee80211_fast_tx *fast_tx, -+ struct sk_buff *skb) -+{ -+ struct ieee80211_local *local = sdata->local; -+ u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; -+ struct ieee80211_txq *txq = sta->sta.txq[tid]; -+ struct txq_info *txqi; -+ struct sk_buff **frag_tail, *head; -+ int subframe_len = skb->len - ETH_ALEN; -+ u8 max_subframes = sta->sta.max_amsdu_subframes; -+ int max_frags = local->hw.max_tx_fragments; -+ int max_amsdu_len = sta->sta.max_amsdu_len; -+ __be16 len; -+ void *data; -+ bool ret = false; -+ int n = 1, nfrags; -+ -+ if (!ieee80211_hw_check(&local->hw, TX_AMSDU)) -+ return false; -+ -+ if (!txq) -+ return false; -+ -+ txqi = to_txq_info(txq); -+ if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags)) -+ return false; -+ -+ if (sta->sta.max_rc_amsdu_len) -+ max_amsdu_len = min_t(int, max_amsdu_len, -+ sta->sta.max_rc_amsdu_len); -+ -+ spin_lock_bh(&txqi->queue.lock); -+ -+ head = skb_peek_tail(&txqi->queue); -+ if (!head) -+ goto out; -+ -+ if (skb->len + head->len > max_amsdu_len) -+ goto out; -+ -+ /* -+ * HT A-MPDU limits maximum MPDU size to 4095 bytes. Since aggregation -+ * sessions are started/stopped without txq flush, use the limit here -+ * to avoid having to de-aggregate later. -+ */ -+ if (skb->len + head->len > 4095 && -+ !sta->sta.vht_cap.vht_supported) -+ goto out; -+ -+ if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) -+ goto out; -+ -+ nfrags = 1 + skb_shinfo(skb)->nr_frags; -+ nfrags += 1 + skb_shinfo(head)->nr_frags; -+ frag_tail = &skb_shinfo(head)->frag_list; -+ while (*frag_tail) { -+ nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags; -+ frag_tail = &(*frag_tail)->next; -+ n++; -+ } -+ -+ if (max_subframes && n > max_subframes) -+ goto out; -+ -+ if (max_frags && nfrags > max_frags) -+ goto out; -+ -+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + 2, -+ &subframe_len)) -+ return false; -+ -+ ret = true; -+ data = skb_push(skb, ETH_ALEN + 2); -+ memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN); -+ -+ data += 2 * ETH_ALEN; -+ len = cpu_to_be16(subframe_len); -+ memcpy(data, &len, 2); -+ memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header)); -+ -+ head->len += skb->len; -+ head->data_len += skb->len; -+ *frag_tail = skb; -+ -+out: -+ spin_unlock_bh(&txqi->queue.lock); -+ -+ return ret; -+} -+ - static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, - struct net_device *dev, struct sta_info *sta, - struct ieee80211_fast_tx *fast_tx, -@@ -2811,6 +2972,10 @@ static bool ieee80211_xmit_fast(struct i - - ieee80211_tx_stats(dev, skb->len + extra_head); - -+ if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) && -+ ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb)) -+ return true; -+ - /* will not be crypto-handled beyond what we do here, so use false - * as the may-encrypt argument for the resize to not account for - * more room than we already have in 'extra_head' diff --git a/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch b/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch deleted file mode 100644 index 9277b2cabc..0000000000 --- a/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch +++ /dev/null @@ -1,64 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 20 Jan 2016 16:46:04 +0100 -Subject: [PATCH] brcmfmac: fix setting primary channel for 80 MHz width -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -First of all it changes the way we calculate primary channel offset. If -we use e.g. 80 MHz channel with primary frequency 5180 MHz (which means -center frequency is 5210 MHz) it makes sense to calculate primary offset -as -30 MHz. -Then it fixes values we compare primary_offset with. We were comparing -offset in MHz against -2 or 2 which was resulting in picking a wrong -primary channel. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -247,7 +247,7 @@ static u16 chandef_to_chanspec(struct br - brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n", - ch->chan->center_freq, ch->center_freq1, ch->width); - ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1); -- primary_offset = ch->center_freq1 - ch->chan->center_freq; -+ primary_offset = ch->chan->center_freq - ch->center_freq1; - switch (ch->width) { - case NL80211_CHAN_WIDTH_20: - case NL80211_CHAN_WIDTH_20_NOHT: -@@ -256,24 +256,21 @@ static u16 chandef_to_chanspec(struct br - break; - case NL80211_CHAN_WIDTH_40: - ch_inf.bw = BRCMU_CHAN_BW_40; -- if (primary_offset < 0) -+ if (primary_offset > 0) - ch_inf.sb = BRCMU_CHAN_SB_U; - else - ch_inf.sb = BRCMU_CHAN_SB_L; - break; - case NL80211_CHAN_WIDTH_80: - ch_inf.bw = BRCMU_CHAN_BW_80; -- if (primary_offset < 0) { -- if (primary_offset < -CH_10MHZ_APART) -- ch_inf.sb = BRCMU_CHAN_SB_UU; -- else -- ch_inf.sb = BRCMU_CHAN_SB_UL; -- } else { -- if (primary_offset > CH_10MHZ_APART) -- ch_inf.sb = BRCMU_CHAN_SB_LL; -- else -- ch_inf.sb = BRCMU_CHAN_SB_LU; -- } -+ if (primary_offset == -30) -+ ch_inf.sb = BRCMU_CHAN_SB_LL; -+ else if (primary_offset == -10) -+ ch_inf.sb = BRCMU_CHAN_SB_LU; -+ else if (primary_offset == 10) -+ ch_inf.sb = BRCMU_CHAN_SB_UL; -+ else -+ ch_inf.sb = BRCMU_CHAN_SB_UU; - break; - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: diff --git a/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch b/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch deleted file mode 100644 index d7018dab3d..0000000000 --- a/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch +++ /dev/null @@ -1,51 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 17:57:01 +0100 -Subject: [PATCH] brcmfmac: analyze descriptors of current component only -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far we were looking for address descriptors without a check for -crossing current component border. In case of dealing with unsupported -descriptor or descriptor missing at all the code would incorrectly get -data from another component. - -Consider this binary-described component from BCM4366 EROM: -4bf83b01 TAG==CI CID==0x83b -20080201 TAG==CI PORTS==0+1 WRAPPERS==0+1 -18400035 TAG==ADDR SZ_SZD TYPE_SLAVE -00050000 -18107085 TAG==ADDR SZ_4K TYPE_SWRAP - -Driver was assigning invalid base address to this core: -brcmfmac: [6 ] core 0x83b:32 base 0x18109000 wrap 0x18107000 -which came from totally different component defined in EROM: -43b36701 TAG==CI CID==0x367 -00000201 TAG==CI PORTS==0+1 WRAPPERS==0+0 -18109005 TAG==ADDR SZ_4K TYPE_SLAVE - -This change will also allow us to support components without wrapper -address in the future. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -@@ -803,7 +803,14 @@ static int brcmf_chip_dmp_get_regaddr(st - *eromaddr -= 4; - return -EFAULT; - } -- } while (desc != DMP_DESC_ADDRESS); -+ } while (desc != DMP_DESC_ADDRESS && -+ desc != DMP_DESC_COMPONENT); -+ -+ /* stop if we crossed current component border */ -+ if (desc == DMP_DESC_COMPONENT) { -+ *eromaddr -= 4; -+ return 0; -+ } - - /* skip upper 32-bit address descriptor */ - if (val & DMP_DESC_ADDRSIZE_GT32) diff --git a/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch b/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch deleted file mode 100644 index 045ab4953b..0000000000 --- a/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 17:57:02 +0100 -Subject: [PATCH] brcmfmac: allow storing PMU core without wrapper address -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Separated PMU core can be found in new devices and should be used for -accessing PMU registers (which were routed through ChipCommon so far). -This core is one of exceptions that doesn't have or need wrapper address -to be still safely accessible. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -@@ -883,7 +883,8 @@ int brcmf_chip_dmp_erom_scan(struct brcm - rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S; - - /* need core with ports */ -- if (nmw + nsw == 0) -+ if (nmw + nsw == 0 && -+ id != BCMA_CORE_PMU) - continue; - - /* try to obtain register address info */ diff --git a/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch b/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch deleted file mode 100644 index 7b7ba4f743..0000000000 --- a/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 17:57:03 +0100 -Subject: [PATCH] brcmfmac: read extended capabilities of ChipCommon core -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is an extra bitfield with info about some present hardware. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -@@ -1025,6 +1025,9 @@ static int brcmf_chip_setup(struct brcmf - /* get chipcommon capabilites */ - pub->cc_caps = chip->ops->read32(chip->ctx, - CORE_CC_REG(base, capabilities)); -+ pub->cc_caps_ext = chip->ops->read32(chip->ctx, -+ CORE_CC_REG(base, -+ capabilities_ext)); - - /* get pmu caps & rev */ - if (pub->cc_caps & CC_CAP_PMU) { ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h -@@ -27,6 +27,7 @@ - * @chip: chip identifier. - * @chiprev: chip revision. - * @cc_caps: chipcommon core capabilities. -+ * @cc_caps_ext: chipcommon core extended capabilities. - * @pmucaps: PMU capabilities. - * @pmurev: PMU revision. - * @rambase: RAM base address (only applicable for ARM CR4 chips). -@@ -38,6 +39,7 @@ struct brcmf_chip { - u32 chip; - u32 chiprev; - u32 cc_caps; -+ u32 cc_caps_ext; - u32 pmucaps; - u32 pmurev; - u32 rambase; diff --git a/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch b/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch deleted file mode 100644 index 2af6fd93bc..0000000000 --- a/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch +++ /dev/null @@ -1,148 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 17:57:04 +0100 -Subject: [PATCH] brcmfmac: access PMU registers using standalone PMU core if - available -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -On recent Broadcom chipsets PMU is present as separated core and it -can't be accessed using ChipCommon anymore as it fails with e.g.: -[ 18.198412] Unhandled fault: imprecise external abort (0x1406) at 0xb6da200f - -Add a new helper function that will return a proper core that should be -used for accessing PMU registers. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c -@@ -1014,6 +1014,7 @@ static int brcmf_chip_setup(struct brcmf - { - struct brcmf_chip *pub; - struct brcmf_core_priv *cc; -+ struct brcmf_core *pmu; - u32 base; - u32 val; - int ret = 0; -@@ -1030,9 +1031,10 @@ static int brcmf_chip_setup(struct brcmf - capabilities_ext)); - - /* get pmu caps & rev */ -+ pmu = brcmf_chip_get_pmu(pub); /* after reading cc_caps_ext */ - if (pub->cc_caps & CC_CAP_PMU) { - val = chip->ops->read32(chip->ctx, -- CORE_CC_REG(base, pmucapabilities)); -+ CORE_CC_REG(pmu->base, pmucapabilities)); - pub->pmurev = val & PCAP_REV_MASK; - pub->pmucaps = val; - } -@@ -1131,6 +1133,23 @@ struct brcmf_core *brcmf_chip_get_chipco - return &cc->pub; - } - -+struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub) -+{ -+ struct brcmf_core *cc = brcmf_chip_get_chipcommon(pub); -+ struct brcmf_core *pmu; -+ -+ /* See if there is separated PMU core available */ -+ if (cc->rev >= 35 && -+ pub->cc_caps_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) { -+ pmu = brcmf_chip_get_core(pub, BCMA_CORE_PMU); -+ if (pmu) -+ return pmu; -+ } -+ -+ /* Fallback to ChipCommon core for older hardware */ -+ return cc; -+} -+ - bool brcmf_chip_iscoreup(struct brcmf_core *pub) - { - struct brcmf_core_priv *core; -@@ -1301,6 +1320,7 @@ bool brcmf_chip_sr_capable(struct brcmf_ - { - u32 base, addr, reg, pmu_cc3_mask = ~0; - struct brcmf_chip_priv *chip; -+ struct brcmf_core *pmu = brcmf_chip_get_pmu(pub); - - brcmf_dbg(TRACE, "Enter\n"); - -@@ -1320,9 +1340,9 @@ bool brcmf_chip_sr_capable(struct brcmf_ - case BRCM_CC_4335_CHIP_ID: - case BRCM_CC_4339_CHIP_ID: - /* read PMU chipcontrol register 3 */ -- addr = CORE_CC_REG(base, chipcontrol_addr); -+ addr = CORE_CC_REG(pmu->base, chipcontrol_addr); - chip->ops->write32(chip->ctx, addr, 3); -- addr = CORE_CC_REG(base, chipcontrol_data); -+ addr = CORE_CC_REG(pmu->base, chipcontrol_data); - reg = chip->ops->read32(chip->ctx, addr); - return (reg & pmu_cc3_mask) != 0; - case BRCM_CC_43430_CHIP_ID: -@@ -1330,12 +1350,12 @@ bool brcmf_chip_sr_capable(struct brcmf_ - reg = chip->ops->read32(chip->ctx, addr); - return reg != 0; - default: -- addr = CORE_CC_REG(base, pmucapabilities_ext); -+ addr = CORE_CC_REG(pmu->base, pmucapabilities_ext); - reg = chip->ops->read32(chip->ctx, addr); - if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) - return false; - -- addr = CORE_CC_REG(base, retention_ctl); -+ addr = CORE_CC_REG(pmu->base, retention_ctl); - reg = chip->ops->read32(chip->ctx, addr); - return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | - PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h -@@ -85,6 +85,7 @@ struct brcmf_chip *brcmf_chip_attach(voi - void brcmf_chip_detach(struct brcmf_chip *chip); - struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid); - struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip); -+struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub); - bool brcmf_chip_iscoreup(struct brcmf_core *core); - void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset); - void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset, ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -3615,7 +3615,6 @@ brcmf_sdio_drivestrengthinit(struct brcm - const struct sdiod_drive_str *str_tab = NULL; - u32 str_mask; - u32 str_shift; -- u32 base; - u32 i; - u32 drivestrength_sel = 0; - u32 cc_data_temp; -@@ -3658,14 +3657,15 @@ brcmf_sdio_drivestrengthinit(struct brcm - } - - if (str_tab != NULL) { -+ struct brcmf_core *pmu = brcmf_chip_get_pmu(ci); -+ - for (i = 0; str_tab[i].strength != 0; i++) { - if (drivestrength >= str_tab[i].strength) { - drivestrength_sel = str_tab[i].sel; - break; - } - } -- base = brcmf_chip_get_chipcommon(ci)->base; -- addr = CORE_CC_REG(base, chipcontrol_addr); -+ addr = CORE_CC_REG(pmu->base, chipcontrol_addr); - brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); - cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); - cc_data_temp &= ~str_mask; -@@ -3835,8 +3835,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - goto fail; - - /* set PMUControl so a backplane reset does PMU state reload */ -- reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base, -- pmucontrol); -+ reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); - reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); - if (err) - goto fail; diff --git a/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch b/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch deleted file mode 100644 index 35887fcb59..0000000000 --- a/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 17:57:05 +0100 -Subject: [PATCH] brcmfmac: add support for 14e4:4365 PCI ID with BCM4366 - chipset -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -On Broadcom ARM routers BCM4366 cards are available with 14e4:4365 ID. -Unfortunately this ID was already used by Broadcom for cards with -BCM43142, a totally different chipset requiring SoftMAC driver. To avoid -a conflict between brcmfmac and bcma use more specific ID entry with -subvendor and subdevice specified. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -1951,6 +1951,9 @@ static const struct dev_pm_ops brcmf_pci - - #define BRCMF_PCIE_DEVICE(dev_id) { BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\ - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } -+#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev) { \ -+ BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\ -+ subvend, subdev, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } - - static struct pci_device_id brcmf_pcie_devid_table[] = { - BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID), -@@ -1966,6 +1969,7 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE_SUB(0x4365, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4365), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID), diff --git a/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch b/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch deleted file mode 100644 index 6ce60f1960..0000000000 --- a/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 31 Jan 2016 12:14:34 +0100 -Subject: [PATCH] brcmfmac: treat NULL character in NVRAM as separator -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Platform NVRAM (stored on a flash partition) has entries separated by a -NULL (\0) char. Our parsing code switches from VALUE state to IDLE -whenever it meets a NULL (\0). When that happens our IDLE handler should -simply consume it and analyze whatever is placed ahead. - -This fixes harmless warnings spamming debugging output: -[ 155.165624] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=20: ignoring invalid character -[ 155.180806] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=44: ignoring invalid character -[ 155.195971] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=63: ignoring invalid character - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c -@@ -93,7 +93,7 @@ static enum nvram_parser_state brcmf_nvr - c = nvp->data[nvp->pos]; - if (c == '\n') - return COMMENT; -- if (is_whitespace(c)) -+ if (is_whitespace(c) || c == '\0') - goto proceed; - if (c == '#') - return COMMENT; diff --git a/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch b/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch deleted file mode 100644 index 012dea1e3a..0000000000 --- a/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: Sjoerd Simons -Date: Mon, 25 Jan 2016 11:47:29 +0100 -Subject: [PATCH] brcmfmac: sdio: Increase the default timeouts a bit - -On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems -the card responds very quickly most of the time, unfortunately during -initialisation it sometimes seems to take just a bit over 2 seconds to -respond. - -This results intialization failing with message like: - brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52 - brcmf_bus_start: failed: -52 - brcmf_sdio_firmware_callback: dongle is not responding - -Increasing the timeout to allow for a bit more headroom allows the -card to initialize reliably. - -A quick search online after diagnosing/fixing this showed that Google -has a similar patch in their ChromeOS tree, so this doesn't seem -specific to the board I'm using. - -Signed-off-by: Sjoerd Simons -Reviewed-by: Julian Calaby -Acked-by: Arend van Spriel -Reviewed-by: Douglas Anderson -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -45,8 +45,8 @@ - #include "chip.h" - #include "firmware.h" - --#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000) --#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000) -+#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) -+#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) - - #ifdef DEBUG - diff --git a/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch deleted file mode 100644 index 71f7a40433..0000000000 --- a/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Miaoqing Pan -Date: Fri, 5 Feb 2016 09:45:50 +0800 -Subject: [PATCH] ath9k: make NF load complete quickly and reliably - -Make NF load complete quickly and reliably. NF load execution -is delayed by HW to end of frame if frame Rx or Tx is ongoing. -Increasing timeout to max frame duration. If NF cal is ongoing -before NF load, stop it before load, and restart it afterwards. - -Signed-off-by: Miaoqing Pan ---- - ---- a/drivers/net/wireless/ath/ath9k/calib.c -+++ b/drivers/net/wireless/ath/ath9k/calib.c -@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; - struct ath_common *common = ath9k_hw_common(ah); - s16 default_nf = ath9k_hw_get_default_nf(ah, chan); -+ u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL); - - if (ah->caldata) - h = ah->caldata->nfCalHist; -@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - } - - /* -+ * stop NF cal if ongoing to ensure NF load completes immediately -+ * (or after end rx/tx frame if ongoing) -+ */ -+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { -+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -+ REG_RMW_BUFFER_FLUSH(ah); -+ ENABLE_REG_RMW_BUFFER(ah); -+ } -+ -+ /* - * Load software filtered NF value into baseband internal minCCApwr - * variable. - */ -@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - - /* - * Wait for load to complete, should be fast, a few 10s of us. -- * The max delay was changed from an original 250us to 10000us -- * since 250us often results in NF load timeout and causes deaf -- * condition during stress testing 12/12/2009 -+ * The max delay was changed from an original 250us to 22.2 msec. -+ * This would increase timeout to the longest possible frame -+ * (11n max length 22.1 msec) - */ -- for (j = 0; j < 10000; j++) { -+ for (j = 0; j < 22200; j++) { - if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & -- AR_PHY_AGC_CONTROL_NF) == 0) -+ AR_PHY_AGC_CONTROL_NF) == 0) - break; - udelay(10); - } - - /* -+ * Restart NF so it can continue. -+ */ -+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { -+ ENABLE_REG_RMW_BUFFER(ah); -+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF) -+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, -+ AR_PHY_AGC_CONTROL_ENABLE_NF); -+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF) -+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, -+ AR_PHY_AGC_CONTROL_NO_UPDATE_NF); -+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -+ REG_RMW_BUFFER_FLUSH(ah); -+ } -+ -+ /* - * We timed out waiting for the noisefloor to load, probably due to an - * in-progress rx. Simply return here and allow the load plenty of time - * to complete before the next calibration interval. We need to avoid -@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - * here, the baseband nf cal will just be capped by our present - * noisefloor until the next calibration timer. - */ -- if (j == 10000) { -+ if (j == 22200) { - ath_dbg(common, ANY, - "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", - REG_READ(ah, AR_PHY_AGC_CONTROL)); diff --git a/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch b/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch deleted file mode 100644 index f7f9df946a..0000000000 --- a/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch +++ /dev/null @@ -1,54 +0,0 @@ -From: Henning Rogge -Date: Wed, 3 Feb 2016 13:58:36 +0100 -Subject: [PATCH] mac80211: Remove MPP table entries with MPath - -Make the mesh_path_del() function remove all mpp table entries -that are proxied by the removed mesh path. - -Acked-by: Bob Copeland -Signed-off-by: Henning Rogge -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/mesh_pathtbl.c -+++ b/net/mac80211/mesh_pathtbl.c -@@ -835,6 +835,29 @@ void mesh_path_flush_by_nexthop(struct s - rcu_read_unlock(); - } - -+static void mpp_flush_by_proxy(struct ieee80211_sub_if_data *sdata, -+ const u8 *proxy) -+{ -+ struct mesh_table *tbl; -+ struct mesh_path *mpp; -+ struct mpath_node *node; -+ int i; -+ -+ rcu_read_lock(); -+ read_lock_bh(&pathtbl_resize_lock); -+ tbl = resize_dereference_mpp_paths(); -+ for_each_mesh_entry(tbl, node, i) { -+ mpp = node->mpath; -+ if (ether_addr_equal(mpp->mpp, proxy)) { -+ spin_lock(&tbl->hashwlock[i]); -+ __mesh_path_del(tbl, node); -+ spin_unlock(&tbl->hashwlock[i]); -+ } -+ } -+ read_unlock_bh(&pathtbl_resize_lock); -+ rcu_read_unlock(); -+} -+ - static void table_flush_by_iface(struct mesh_table *tbl, - struct ieee80211_sub_if_data *sdata) - { -@@ -892,6 +915,9 @@ int mesh_path_del(struct ieee80211_sub_i - int hash_idx; - int err = 0; - -+ /* flush relevant mpp entries first */ -+ mpp_flush_by_proxy(sdata, addr); -+ - read_lock_bh(&pathtbl_resize_lock); - tbl = resize_dereference_mesh_paths(); - hash_idx = mesh_table_hash(addr, sdata, tbl); diff --git a/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch b/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch deleted file mode 100644 index 740993c9e0..0000000000 --- a/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch +++ /dev/null @@ -1,104 +0,0 @@ -From: Henning Rogge -Date: Wed, 3 Feb 2016 13:58:37 +0100 -Subject: [PATCH] mac80211: let unused MPP table entries timeout - -Remember the last time when a mpp table entry is used for -rx or tx and remove them after MESH_PATH_EXPIRE time. - -Acked-by: Bob Copeland -Signed-off-by: Henning Rogge -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/mesh_pathtbl.c -+++ b/net/mac80211/mesh_pathtbl.c -@@ -942,6 +942,46 @@ enddel: - } - - /** -+ * mpp_path_del - delete a mesh proxy path from the table -+ * -+ * @addr: addr address (ETH_ALEN length) -+ * @sdata: local subif -+ * -+ * Returns: 0 if successful -+ */ -+static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) -+{ -+ struct mesh_table *tbl; -+ struct mesh_path *mpath; -+ struct mpath_node *node; -+ struct hlist_head *bucket; -+ int hash_idx; -+ int err = 0; -+ -+ read_lock_bh(&pathtbl_resize_lock); -+ tbl = resize_dereference_mpp_paths(); -+ hash_idx = mesh_table_hash(addr, sdata, tbl); -+ bucket = &tbl->hash_buckets[hash_idx]; -+ -+ spin_lock(&tbl->hashwlock[hash_idx]); -+ hlist_for_each_entry(node, bucket, list) { -+ mpath = node->mpath; -+ if (mpath->sdata == sdata && -+ ether_addr_equal(addr, mpath->dst)) { -+ __mesh_path_del(tbl, node); -+ goto enddel; -+ } -+ } -+ -+ err = -ENXIO; -+enddel: -+ mesh_paths_generation++; -+ spin_unlock(&tbl->hashwlock[hash_idx]); -+ read_unlock_bh(&pathtbl_resize_lock); -+ return err; -+} -+ -+/** - * mesh_path_tx_pending - sends pending frames in a mesh path queue - * - * @mpath: mesh path to activate -@@ -1157,6 +1197,17 @@ void mesh_path_expire(struct ieee80211_s - time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE)) - mesh_path_del(mpath->sdata, mpath->dst); - } -+ -+ tbl = rcu_dereference(mpp_paths); -+ for_each_mesh_entry(tbl, node, i) { -+ if (node->mpath->sdata != sdata) -+ continue; -+ mpath = node->mpath; -+ if ((!(mpath->flags & MESH_PATH_FIXED)) && -+ time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE)) -+ mpp_path_del(mpath->sdata, mpath->dst); -+ } -+ - rcu_read_unlock(); - } - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -2291,6 +2291,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 - spin_lock_bh(&mppath->state_lock); - if (!ether_addr_equal(mppath->mpp, mpp_addr)) - memcpy(mppath->mpp, mpp_addr, ETH_ALEN); -+ mppath->exp_time = jiffies; - spin_unlock_bh(&mppath->state_lock); - } - rcu_read_unlock(); ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -2171,8 +2171,11 @@ static struct sk_buff *ieee80211_build_h - mpp_lookup = true; - } - -- if (mpp_lookup) -+ if (mpp_lookup) { - mppath = mpp_path_lookup(sdata, skb->data); -+ if (mppath) -+ mppath->exp_time = jiffies; -+ } - - if (mppath && mpath) - mesh_path_del(mpath->sdata, mpath->dst); diff --git a/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch b/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch deleted file mode 100644 index 0c36b1d568..0000000000 --- a/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch +++ /dev/null @@ -1,143 +0,0 @@ -From: Henning Rogge -Date: Wed, 3 Feb 2016 13:58:38 +0100 -Subject: [PATCH] mac80211: Unify mesh and mpp path removal function - -mpp_path_del() and mesh_path_del() are mostly the same function. -Move common code into a new static function. - -Acked-by: Bob Copeland -Signed-off-by: Henning Rogge -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/mesh_pathtbl.c -+++ b/net/mac80211/mesh_pathtbl.c -@@ -55,16 +55,21 @@ int mpp_paths_generation; - static DEFINE_RWLOCK(pathtbl_resize_lock); - - -+static inline struct mesh_table *resize_dereference_paths( -+ struct mesh_table __rcu *table) -+{ -+ return rcu_dereference_protected(table, -+ lockdep_is_held(&pathtbl_resize_lock)); -+} -+ - static inline struct mesh_table *resize_dereference_mesh_paths(void) - { -- return rcu_dereference_protected(mesh_paths, -- lockdep_is_held(&pathtbl_resize_lock)); -+ return resize_dereference_paths(mesh_paths); - } - - static inline struct mesh_table *resize_dereference_mpp_paths(void) - { -- return rcu_dereference_protected(mpp_paths, -- lockdep_is_held(&pathtbl_resize_lock)); -+ return resize_dereference_paths(mpp_paths); - } - - /* -@@ -899,14 +904,17 @@ void mesh_path_flush_by_iface(struct iee - } - - /** -- * mesh_path_del - delete a mesh path from the table -+ * table_path_del - delete a path from the mesh or mpp table - * -- * @addr: dst address (ETH_ALEN length) -+ * @tbl: mesh or mpp path table - * @sdata: local subif -+ * @addr: dst address (ETH_ALEN length) - * - * Returns: 0 if successful - */ --int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) -+static int table_path_del(struct mesh_table __rcu *rcu_tbl, -+ struct ieee80211_sub_if_data *sdata, -+ const u8 *addr) - { - struct mesh_table *tbl; - struct mesh_path *mpath; -@@ -915,11 +923,7 @@ int mesh_path_del(struct ieee80211_sub_i - int hash_idx; - int err = 0; - -- /* flush relevant mpp entries first */ -- mpp_flush_by_proxy(sdata, addr); -- -- read_lock_bh(&pathtbl_resize_lock); -- tbl = resize_dereference_mesh_paths(); -+ tbl = resize_dereference_paths(rcu_tbl); - hash_idx = mesh_table_hash(addr, sdata, tbl); - bucket = &tbl->hash_buckets[hash_idx]; - -@@ -935,9 +939,30 @@ int mesh_path_del(struct ieee80211_sub_i - - err = -ENXIO; - enddel: -- mesh_paths_generation++; - spin_unlock(&tbl->hashwlock[hash_idx]); -+ return err; -+} -+ -+/** -+ * mesh_path_del - delete a mesh path from the table -+ * -+ * @addr: dst address (ETH_ALEN length) -+ * @sdata: local subif -+ * -+ * Returns: 0 if successful -+ */ -+int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) -+{ -+ int err = 0; -+ -+ /* flush relevant mpp entries first */ -+ mpp_flush_by_proxy(sdata, addr); -+ -+ read_lock_bh(&pathtbl_resize_lock); -+ err = table_path_del(mesh_paths, sdata, addr); -+ mesh_paths_generation++; - read_unlock_bh(&pathtbl_resize_lock); -+ - return err; - } - -@@ -951,33 +976,13 @@ enddel: - */ - static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) - { -- struct mesh_table *tbl; -- struct mesh_path *mpath; -- struct mpath_node *node; -- struct hlist_head *bucket; -- int hash_idx; - int err = 0; - - read_lock_bh(&pathtbl_resize_lock); -- tbl = resize_dereference_mpp_paths(); -- hash_idx = mesh_table_hash(addr, sdata, tbl); -- bucket = &tbl->hash_buckets[hash_idx]; -- -- spin_lock(&tbl->hashwlock[hash_idx]); -- hlist_for_each_entry(node, bucket, list) { -- mpath = node->mpath; -- if (mpath->sdata == sdata && -- ether_addr_equal(addr, mpath->dst)) { -- __mesh_path_del(tbl, node); -- goto enddel; -- } -- } -- -- err = -ENXIO; --enddel: -- mesh_paths_generation++; -- spin_unlock(&tbl->hashwlock[hash_idx]); -+ err = table_path_del(mpp_paths, sdata, addr); -+ mpp_paths_generation++; - read_unlock_bh(&pathtbl_resize_lock); -+ - return err; - } - diff --git a/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch b/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch deleted file mode 100644 index 4dc6d663ed..0000000000 --- a/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch +++ /dev/null @@ -1,51 +0,0 @@ -From: Sven Eckelmann -Date: Tue, 2 Feb 2016 08:12:26 +0100 -Subject: [PATCH] mac80211: minstrel: Change expected throughput unit back to - Kbps - -The change from cur_tp to the function -minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the -current throughput. For example in minstrel_ht the correct -conversion between them would be: - - mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..). - -This factor 10 must also be included in the calculation of -minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to -return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing -algorithms like B.A.T.M.A.N. V will make incorrect decision based on these -values. Its kernel based implementation expects expected_throughput always -to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps]. - -The same requirement has iw or olsrdv2's nl80211 based statistics module -which retrieve the same data via NL80211_STA_INFO_TX_BITRATE. - -Cc: stable@vger.kernel.org -Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function") -Signed-off-by: Sven Eckelmann -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/rc80211_minstrel.c -+++ b/net/mac80211/rc80211_minstrel.c -@@ -711,7 +711,7 @@ static u32 minstrel_get_expected_through - * computing cur_tp - */ - tmp_mrs = &mi->r[idx].stats; -- tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma); -+ tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma) * 10; - tmp_cur_tp = tmp_cur_tp * 1200 * 8 / 1024; - - return tmp_cur_tp; ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -1335,7 +1335,8 @@ static u32 minstrel_ht_get_expected_thro - prob = mi->groups[i].rates[j].prob_ewma; - - /* convert tp_avg from pkt per second in kbps */ -- tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * AVG_PKT_SIZE * 8 / 1024; -+ tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * 10; -+ tp_avg = tp_avg * AVG_PKT_SIZE * 8 / 1024; - - return tp_avg; - } diff --git a/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch b/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch deleted file mode 100644 index 1fd016f7f6..0000000000 --- a/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch +++ /dev/null @@ -1,307 +0,0 @@ -From: Hante Meuleman -Date: Sun, 7 Feb 2016 18:08:24 +0100 -Subject: [PATCH] brcmfmac: Increase nr of supported flowrings. -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -New generation devices have firmware which has more than 256 flowrings. -E.g. following debugging message comes from 14e4:4365 BCM4366: -[ 194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264 - -At various code places (related to flowrings) we were using u8 which -could lead to storing wrong number or infinite loops when indexing with -this type. This issue was quite easy to spot in brcmf_flowring_detach -where it led to infinite loop e.g. on failed initialization. - -This patch switches code to proper types and increases the maximum -number of supported flowrings to 512. - -Originally this change was sent in September 2015, but back it was -causing a regression on BCM43602 resulting in: -Unable to handle kernel NULL pointer dereference at virtual address ... - -The reason for this regression was missing update (s/u8/u16) of struct -brcmf_flowring_ring. This problem was handled in 9f64df9 ("brcmfmac: Fix -bug in flowring management."). Starting with that it's safe to apply -this original patch as it doesn't cause a regression anymore. - -This patch fixes an infinite loop on BCM4366 which is supported since -4.4 so it makes sense to apply it to stable 4.4+. - -Cc: # 4.4+ -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Rafał Miłecki ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c -@@ -32,7 +32,7 @@ - #define BRCMF_FLOWRING_LOW (BRCMF_FLOWRING_HIGH - 256) - #define BRCMF_FLOWRING_INVALID_IFIDX 0xff - --#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] + fifo + ifidx * 16) -+#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] * 2 + fifo + ifidx * 16) - #define BRCMF_FLOWRING_HASH_STA(fifo, ifidx) (fifo + ifidx * 16) - - static const u8 brcmf_flowring_prio2fifo[] = { -@@ -68,7 +68,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f - u8 prio, u8 ifidx) - { - struct brcmf_flowring_hash *hash; -- u8 hash_idx; -+ u16 hash_idx; - u32 i; - bool found; - bool sta; -@@ -88,6 +88,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f - } - hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) : - BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx); -+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); - found = false; - hash = flow->hash; - for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) { -@@ -98,6 +99,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f - break; - } - hash_idx++; -+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); - } - if (found) - return hash[hash_idx].flowid; -@@ -111,7 +113,7 @@ u32 brcmf_flowring_create(struct brcmf_f - { - struct brcmf_flowring_ring *ring; - struct brcmf_flowring_hash *hash; -- u8 hash_idx; -+ u16 hash_idx; - u32 i; - bool found; - u8 fifo; -@@ -131,6 +133,7 @@ u32 brcmf_flowring_create(struct brcmf_f - } - hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) : - BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx); -+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); - found = false; - hash = flow->hash; - for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) { -@@ -140,6 +143,7 @@ u32 brcmf_flowring_create(struct brcmf_f - break; - } - hash_idx++; -+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); - } - if (found) { - for (i = 0; i < flow->nrofrings; i++) { -@@ -169,7 +173,7 @@ u32 brcmf_flowring_create(struct brcmf_f - } - - --u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid) -+u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; - -@@ -179,7 +183,7 @@ u8 brcmf_flowring_tid(struct brcmf_flowr - } - - --static void brcmf_flowring_block(struct brcmf_flowring *flow, u8 flowid, -+static void brcmf_flowring_block(struct brcmf_flowring *flow, u16 flowid, - bool blocked) - { - struct brcmf_flowring_ring *ring; -@@ -228,10 +232,10 @@ static void brcmf_flowring_block(struct - } - - --void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid) -+void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; -- u8 hash_idx; -+ u16 hash_idx; - struct sk_buff *skb; - - ring = flow->rings[flowid]; -@@ -253,7 +257,7 @@ void brcmf_flowring_delete(struct brcmf_ - } - - --u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid, - struct sk_buff *skb) - { - struct brcmf_flowring_ring *ring; -@@ -279,7 +283,7 @@ u32 brcmf_flowring_enqueue(struct brcmf_ - } - - --struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid) -+struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; - struct sk_buff *skb; -@@ -300,7 +304,7 @@ struct sk_buff *brcmf_flowring_dequeue(s - } - - --void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid, -+void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid, - struct sk_buff *skb) - { - struct brcmf_flowring_ring *ring; -@@ -311,7 +315,7 @@ void brcmf_flowring_reinsert(struct brcm - } - - --u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid) -+u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; - -@@ -326,7 +330,7 @@ u32 brcmf_flowring_qlen(struct brcmf_flo - } - - --void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid) -+void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; - -@@ -340,10 +344,10 @@ void brcmf_flowring_open(struct brcmf_fl - } - - --u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid) -+u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid) - { - struct brcmf_flowring_ring *ring; -- u8 hash_idx; -+ u16 hash_idx; - - ring = flow->rings[flowid]; - hash_idx = ring->hash_id; -@@ -384,7 +388,7 @@ void brcmf_flowring_detach(struct brcmf_ - struct brcmf_pub *drvr = bus_if->drvr; - struct brcmf_flowring_tdls_entry *search; - struct brcmf_flowring_tdls_entry *remove; -- u8 flowid; -+ u16 flowid; - - for (flowid = 0; flowid < flow->nrofrings; flowid++) { - if (flow->rings[flowid]) -@@ -408,7 +412,7 @@ void brcmf_flowring_configure_addr_mode( - struct brcmf_bus *bus_if = dev_get_drvdata(flow->dev); - struct brcmf_pub *drvr = bus_if->drvr; - u32 i; -- u8 flowid; -+ u16 flowid; - - if (flow->addr_mode[ifidx] != addr_mode) { - for (i = 0; i < ARRAY_SIZE(flow->hash); i++) { -@@ -434,7 +438,7 @@ void brcmf_flowring_delete_peer(struct b - struct brcmf_flowring_tdls_entry *prev; - struct brcmf_flowring_tdls_entry *search; - u32 i; -- u8 flowid; -+ u16 flowid; - bool sta; - - sta = (flow->addr_mode[ifidx] == ADDR_INDIRECT); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h -@@ -16,7 +16,7 @@ - #define BRCMFMAC_FLOWRING_H - - --#define BRCMF_FLOWRING_HASHSIZE 256 -+#define BRCMF_FLOWRING_HASHSIZE 512 /* has to be 2^x */ - #define BRCMF_FLOWRING_INVALID_ID 0xFFFFFFFF - - -@@ -24,7 +24,7 @@ struct brcmf_flowring_hash { - u8 mac[ETH_ALEN]; - u8 fifo; - u8 ifidx; -- u8 flowid; -+ u16 flowid; - }; - - enum ring_status { -@@ -61,16 +61,16 @@ u32 brcmf_flowring_lookup(struct brcmf_f - u8 prio, u8 ifidx); - u32 brcmf_flowring_create(struct brcmf_flowring *flow, u8 da[ETH_ALEN], - u8 prio, u8 ifidx); --void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid); --void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid); --u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid); --u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -+void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid); -+void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid); -+u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid); -+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid, - struct sk_buff *skb); --struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid); --void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid, -+struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid); -+void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid, - struct sk_buff *skb); --u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid); --u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid); -+u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid); -+u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid); - struct brcmf_flowring *brcmf_flowring_attach(struct device *dev, u16 nrofrings); - void brcmf_flowring_detach(struct brcmf_flowring *flow); - void brcmf_flowring_configure_addr_mode(struct brcmf_flowring *flow, int ifidx, ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -@@ -677,7 +677,7 @@ static u32 brcmf_msgbuf_flowring_create( - } - - --static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u8 flowid) -+static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid) - { - struct brcmf_flowring *flow = msgbuf->flow; - struct brcmf_commonring *commonring; -@@ -1310,7 +1310,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct - } - - --void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid) -+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid) - { - struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd; - struct msgbuf_tx_flowring_delete_req *delete; -@@ -1415,6 +1415,13 @@ int brcmf_proto_msgbuf_attach(struct brc - u32 count; - - if_msgbuf = drvr->bus_if->msgbuf; -+ -+ if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) { -+ brcmf_err("driver not configured for this many flowrings %d\n", -+ if_msgbuf->nrof_flowrings); -+ if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1; -+ } -+ - msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL); - if (!msgbuf) - goto fail; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h -@@ -33,7 +33,7 @@ - - - int brcmf_proto_msgbuf_rx_trigger(struct device *dev); --void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid); -+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid); - int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr); - void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr); - #else diff --git a/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch b/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch deleted file mode 100644 index e414f23784..0000000000 --- a/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Felix Fietkau -Date: Mon, 8 Feb 2016 14:24:36 +0100 -Subject: [PATCH] cfg80211: fix faulty variable initialization in - ieee80211_amsdu_to_8023s - -reuse_skb is set to true if the code decides to use the last segment. -Fixes a memory leak - -Signed-off-by: Felix Fietkau ---- - ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -676,7 +676,7 @@ void ieee80211_amsdu_to_8023s(struct sk_ - u8 *payload; - int offset = 0, remaining, err; - struct ethhdr eth; -- bool reuse_skb = true; -+ bool reuse_skb = false; - bool last = false; - - if (has_80211_header) { diff --git a/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch b/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch deleted file mode 100644 index 6e2d0cf5b0..0000000000 --- a/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch +++ /dev/null @@ -1,132 +0,0 @@ -From: Felix Fietkau -Date: Mon, 8 Feb 2016 14:33:19 +0100 -Subject: [PATCH] cfg80211: reuse existing page fragments in A-MSDU rx - -This massively reduces data copying and thus improves rx performance - -Signed-off-by: Felix Fietkau ---- - ---- a/net/wireless/util.c -+++ b/net/wireless/util.c -@@ -644,23 +644,93 @@ int ieee80211_data_from_8023(struct sk_b - } - EXPORT_SYMBOL(ieee80211_data_from_8023); - -+static void -+__frame_add_frag(struct sk_buff *skb, struct page *page, -+ void *ptr, int len, int size) -+{ -+ struct skb_shared_info *sh = skb_shinfo(skb); -+ int page_offset; -+ -+ atomic_inc(&page->_count); -+ page_offset = ptr - page_address(page); -+ skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size); -+} -+ -+static void -+__ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame, -+ int offset, int len) -+{ -+ struct skb_shared_info *sh = skb_shinfo(skb); -+ const skb_frag_t *frag = &sh->frags[-1]; -+ struct page *frag_page; -+ void *frag_ptr; -+ int frag_len, frag_size; -+ int head_size = skb->len - skb->data_len; -+ int cur_len; -+ -+ frag_page = virt_to_head_page(skb->head); -+ frag_ptr = skb->data; -+ frag_size = head_size; -+ -+ while (offset >= frag_size) { -+ offset -= frag_size; -+ frag++; -+ frag_page = skb_frag_page(frag); -+ frag_ptr = skb_frag_address(frag); -+ frag_size = skb_frag_size(frag); -+ } -+ -+ frag_ptr += offset; -+ frag_len = frag_size - offset; -+ -+ cur_len = min(len, frag_len); -+ -+ __frame_add_frag(frame, frag_page, frag_ptr, cur_len, frag_size); -+ len -= cur_len; -+ -+ while (len > 0) { -+ frag++; -+ frag_len = skb_frag_size(frag); -+ cur_len = min(len, frag_len); -+ __frame_add_frag(frame, skb_frag_page(frag), -+ skb_frag_address(frag), cur_len, frag_len); -+ len -= cur_len; -+ } -+} -+ - static struct sk_buff * - __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, -- int offset, int len) -+ int offset, int len, bool reuse_frag) - { - struct sk_buff *frame; -+ int cur_len = len; - - if (skb->len - offset < len) - return NULL; - - /* -+ * When reusing framents, copy some data to the head to simplify -+ * ethernet header handling and speed up protocol header processing -+ * in the stack later. -+ */ -+ if (reuse_frag) -+ cur_len = min_t(int, len, 32); -+ -+ /* - * Allocate and reserve two bytes more for payload - * alignment since sizeof(struct ethhdr) is 14. - */ -- frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len); -+ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len); - - skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); -- skb_copy_bits(skb, offset, skb_put(frame, len), len); -+ skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len); -+ -+ len -= cur_len; -+ if (!len) -+ return frame; -+ -+ offset += cur_len; -+ __ieee80211_amsdu_copy_frag(skb, frame, offset, len); - - return frame; - } -@@ -676,6 +746,7 @@ void ieee80211_amsdu_to_8023s(struct sk_ - u8 *payload; - int offset = 0, remaining, err; - struct ethhdr eth; -+ bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb); - bool reuse_skb = false; - bool last = false; - -@@ -703,12 +774,13 @@ void ieee80211_amsdu_to_8023s(struct sk_ - offset += sizeof(struct ethhdr); - /* reuse skb for the last subframe */ - last = remaining <= subframe_len + padding; -- if (!skb_is_nonlinear(skb) && last) { -+ if (!skb_is_nonlinear(skb) && !reuse_frag && last) { - skb_pull(skb, offset); - frame = skb; - reuse_skb = true; - } else { -- frame = __ieee80211_amsdu_copy(skb, hlen, offset, len); -+ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len, -+ reuse_frag); - if (!frame) - goto purge; - diff --git a/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch b/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch deleted file mode 100644 index f8f4f0999d..0000000000 --- a/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Lorenzo Bianconi -Date: Wed, 10 Feb 2016 16:08:17 +0100 -Subject: [PATCH] mac80211: fix wiphy supported_band access - -Fix wiphy supported_band access in tx radiotap parsing. In particular, -info->band is always set to 0 (IEEE80211_BAND_2GHZ) since it has not -assigned yet. This cause a kernel crash on 5GHz only devices. -Move ieee80211_parse_tx_radiotap() after info->band assignment - -Signed-off-by: Lorenzo Bianconi ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1890,10 +1890,6 @@ netdev_tx_t ieee80211_monitor_start_xmit - info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_CTL_INJECTED; - -- /* process and remove the injection radiotap header */ -- if (!ieee80211_parse_tx_radiotap(local, skb)) -- goto fail; -- - rcu_read_lock(); - - /* -@@ -1955,6 +1951,10 @@ netdev_tx_t ieee80211_monitor_start_xmit - goto fail_rcu; - - info->band = chandef->chan->band; -+ /* process and remove the injection radiotap header */ -+ if (!ieee80211_parse_tx_radiotap(local, skb)) -+ goto fail_rcu; -+ - ieee80211_xmit(sdata, NULL, skb); - rcu_read_unlock(); - diff --git a/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch b/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch deleted file mode 100644 index acaacf7cac..0000000000 --- a/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch +++ /dev/null @@ -1,61 +0,0 @@ -From: Felix Fietkau -Date: Thu, 18 Feb 2016 19:30:05 +0100 -Subject: [PATCH] mac80211: minstrel_ht: set A-MSDU tx limits based on selected - max_prob_rate - -Prevents excessive A-MSDU aggregation at low data rates or bad -conditions. - -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -883,6 +883,39 @@ minstrel_ht_set_rate(struct minstrel_pri - ratetbl->rate[offset].flags = flags; - } - -+static int -+minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi) -+{ -+ int group = mi->max_prob_rate / MCS_GROUP_RATES; -+ const struct mcs_group *g = &minstrel_mcs_groups[group]; -+ int rate = mi->max_prob_rate % MCS_GROUP_RATES; -+ -+ /* Disable A-MSDU if max_prob_rate is bad */ -+ if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100)) -+ return 1; -+ -+ /* If the rate is slower than single-stream MCS1, make A-MSDU limit small */ -+ if (g->duration[rate] > MCS_DURATION(1, 0, 52)) -+ return 500; -+ -+ /* -+ * If the rate is slower than single-stream MCS4, limit A-MSDU to usual -+ * data packet size -+ */ -+ if (g->duration[rate] > MCS_DURATION(1, 0, 104)) -+ return 1500; -+ -+ /* -+ * If the rate is slower than single-stream MCS7, limit A-MSDU to twice -+ * the usual data packet size -+ */ -+ if (g->duration[rate] > MCS_DURATION(1, 0, 260)) -+ return 3000; -+ -+ /* unlimited */ -+ return 0; -+} -+ - static void - minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) - { -@@ -907,6 +940,7 @@ minstrel_ht_update_rates(struct minstrel - minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate); - } - -+ mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi); - rates->rate[i].idx = -1; - rate_control_set_rates(mp->hw, mi->sta, rates); - } diff --git a/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch b/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch deleted file mode 100644 index 32a2ad6f0b..0000000000 --- a/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Felix Fietkau -Date: Thu, 18 Feb 2016 19:45:33 +0100 -Subject: [PATCH] mac80211: minstrel_ht: set default tx aggregation timeout to - 0 - -The value 5000 was put here with the addition of the timeout field to -ieee80211_start_tx_ba_session. It was originally added in mac80211 to -save resources for drivers like iwlwifi, which only supports a limited -number of concurrent aggregation sessions. - -Since iwlwifi does not use minstrel_ht and other drivers don't need -this, 0 is a better default - especially since there have been -recent reports of aggregation setup related issues reproduced with -ath9k. This should improve stability without causing any adverse -effects. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -692,7 +692,7 @@ minstrel_aggr_check(struct ieee80211_sta - if (likely(sta->ampdu_mlme.tid_tx[tid])) - return; - -- ieee80211_start_tx_ba_session(pubsta, tid, 5000); -+ ieee80211_start_tx_ba_session(pubsta, tid, 0); - } - - static void diff --git a/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch b/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch deleted file mode 100644 index 229351ba56..0000000000 --- a/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Felix Fietkau -Date: Wed, 24 Feb 2016 12:03:13 +0100 -Subject: [PATCH] mac80211: minstrel_ht: fix a logic error in RTS/CTS handling -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's -a dual-stream rate and the sta is in dynamic SMPS mode. - -Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS") -Reported-by: Matías Richart -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -872,7 +872,7 @@ minstrel_ht_set_rate(struct minstrel_pri - * - if station is in dynamic SMPS (and streams > 1) - * - for fallback rates, to increase chances of getting through - */ -- if (offset > 0 && -+ if (offset > 0 || - (mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC && - group->streams > 1)) { - ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts; diff --git a/package/kernel/mac80211/patches/338-mac80211-Fix-Public-Action-frame-RX-in-AP-mode.patch b/package/kernel/mac80211/patches/338-mac80211-Fix-Public-Action-frame-RX-in-AP-mode.patch deleted file mode 100644 index 56cd94aa15..0000000000 --- a/package/kernel/mac80211/patches/338-mac80211-Fix-Public-Action-frame-RX-in-AP-mode.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Jouni Malinen -Date: Tue, 1 Mar 2016 00:29:00 +0200 -Subject: [PATCH] mac80211: Fix Public Action frame RX in AP mode - -Public Action frames use special rules for how the BSSID field (Address -3) is set. A wildcard BSSID is used in cases where the transmitter and -recipient are not members of the same BSS. As such, we need to accept -Public Action frames with wildcard BSSID. - -Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when -operating as AP") added a rule that drops Action frames to TDLS-peers -based on an Action frame having different DA (Address 1) and BSSID -(Address 3) values. This is not correct since it misses the possibility -of BSSID being a wildcard BSSID in which case the Address 1 would not -necessarily match. - -Fix this by allowing mac80211 to accept wildcard BSSID in an Action -frame when in AP mode. - -Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") -Cc: stable@vger.kernel.org -Signed-off-by: Jouni Malinen -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -3374,6 +3374,7 @@ static bool ieee80211_accept_frame(struc - return false; - /* ignore action frames to TDLS-peers */ - if (ieee80211_is_action(hdr->frame_control) && -+ !is_broadcast_ether_addr(bssid) && - !ether_addr_equal(bssid, hdr->addr1)) - return false; - } diff --git a/package/kernel/mac80211/patches/339-cfg80211-add-radiotap-VHT-info-to-rtap_namespace_siz.patch b/package/kernel/mac80211/patches/339-cfg80211-add-radiotap-VHT-info-to-rtap_namespace_siz.patch deleted file mode 100644 index 15d6cd03ea..0000000000 --- a/package/kernel/mac80211/patches/339-cfg80211-add-radiotap-VHT-info-to-rtap_namespace_siz.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Lorenzo Bianconi -Date: Fri, 19 Feb 2016 11:43:04 +0100 -Subject: [PATCH] cfg80211: add radiotap VHT info to rtap_namespace_sizes - -Add IEEE80211_RADIOTAP_VHT entry to rtap_namespace_sizes array in order to -define alignment and size of VHT info in tx radiotap - -Signed-off-by: Lorenzo Bianconi -Signed-off-by: Johannes Berg ---- - ---- a/net/wireless/radiotap.c -+++ b/net/wireless/radiotap.c -@@ -43,6 +43,7 @@ static const struct radiotap_align_size - [IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, }, - [IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, }, - [IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, }, -+ [IEEE80211_RADIOTAP_VHT] = { .align = 2, .size = 12, }, - /* - * add more here as they are defined in radiotap.h - */ diff --git a/package/kernel/mac80211/patches/340-mac80211-fix-parsing-of-40Mhz-in-injected-radiotap-h.patch b/package/kernel/mac80211/patches/340-mac80211-fix-parsing-of-40Mhz-in-injected-radiotap-h.patch deleted file mode 100644 index de1b38625c..0000000000 --- a/package/kernel/mac80211/patches/340-mac80211-fix-parsing-of-40Mhz-in-injected-radiotap-h.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Sven Eckelmann -Date: Wed, 24 Feb 2016 16:25:49 +0100 -Subject: [PATCH] mac80211: fix parsing of 40Mhz in injected radiotap - header - -The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2 -bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if -the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be -confused with IEEE80211_RADIOTAP_MCS_BW_20U. - -Fixes: 5ec3aed9ba4c ("mac80211: Parse legacy and HT rate in injected frames") -Signed-off-by: Sven Eckelmann ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1689,7 +1689,7 @@ static bool ieee80211_parse_tx_radiotap( - bool rate_found = false; - u8 rate_retries = 0; - u16 rate_flags = 0; -- u8 mcs_known, mcs_flags; -+ u8 mcs_known, mcs_flags, mcs_bw; - int i; - - info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | -@@ -1765,8 +1765,9 @@ static bool ieee80211_parse_tx_radiotap( - mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) - rate_flags |= IEEE80211_TX_RC_SHORT_GI; - -+ mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK; - if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && -- mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40) -+ mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40) - rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - break; - diff --git a/package/kernel/mac80211/patches/341-mac80211-parse-VHT-info-in-injected-frames.patch b/package/kernel/mac80211/patches/341-mac80211-parse-VHT-info-in-injected-frames.patch deleted file mode 100644 index ac1f2517f2..0000000000 --- a/package/kernel/mac80211/patches/341-mac80211-parse-VHT-info-in-injected-frames.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Lorenzo Bianconi -Date: Tue, 23 Feb 2016 15:43:35 +0100 -Subject: [PATCH] mac80211: parse VHT info in injected frames - -Add VHT radiotap parsing support to ieee80211_parse_tx_radiotap(). -That capability has been tested using a d-link dir-860l rev b1 running -OpenWrt trunk and mt76 driver - -Signed-off-by: Lorenzo Bianconi ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1690,6 +1690,8 @@ static bool ieee80211_parse_tx_radiotap( - u8 rate_retries = 0; - u16 rate_flags = 0; - u8 mcs_known, mcs_flags, mcs_bw; -+ u16 vht_known; -+ u8 vht_mcs = 0, vht_nss = 0; - int i; - - info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | -@@ -1771,6 +1773,32 @@ static bool ieee80211_parse_tx_radiotap( - rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - break; - -+ case IEEE80211_RADIOTAP_VHT: -+ vht_known = get_unaligned_le16(iterator.this_arg); -+ rate_found = true; -+ -+ rate_flags = IEEE80211_TX_RC_VHT_MCS; -+ if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) && -+ (iterator.this_arg[2] & -+ IEEE80211_RADIOTAP_VHT_FLAG_SGI)) -+ rate_flags |= IEEE80211_TX_RC_SHORT_GI; -+ if (vht_known & -+ IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) { -+ if (iterator.this_arg[3] == 1) -+ rate_flags |= -+ IEEE80211_TX_RC_40_MHZ_WIDTH; -+ else if (iterator.this_arg[3] == 4) -+ rate_flags |= -+ IEEE80211_TX_RC_80_MHZ_WIDTH; -+ else if (iterator.this_arg[3] == 11) -+ rate_flags |= -+ IEEE80211_TX_RC_160_MHZ_WIDTH; -+ } -+ -+ vht_mcs = iterator.this_arg[4] >> 4; -+ vht_nss = iterator.this_arg[4] & 0xF; -+ break; -+ - /* - * Please update the file - * Documentation/networking/mac80211-injection.txt -@@ -1796,6 +1824,9 @@ static bool ieee80211_parse_tx_radiotap( - - if (rate_flags & IEEE80211_TX_RC_MCS) { - info->control.rates[0].idx = rate; -+ } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) { -+ ieee80211_rate_set_vht(info->control.rates, vht_mcs, -+ vht_nss); - } else { - for (i = 0; i < sband->n_bitrates; i++) { - if (rate * 5 != sband->bitrates[i].bitrate) diff --git a/package/kernel/mac80211/patches/342-mac80211-do-not-pass-injected-frames-without-a-valid.patch b/package/kernel/mac80211/patches/342-mac80211-do-not-pass-injected-frames-without-a-valid.patch deleted file mode 100644 index d7452c29c1..0000000000 --- a/package/kernel/mac80211/patches/342-mac80211-do-not-pass-injected-frames-without-a-valid.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Felix Fietkau -Date: Wed, 2 Mar 2016 15:51:40 +0100 -Subject: [PATCH] mac80211: do not pass injected frames without a valid rate to - the driver - -Fall back to rate control if the requested bitrate was not found. - -Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1837,6 +1837,9 @@ static bool ieee80211_parse_tx_radiotap( - } - } - -+ if (info->control.rates[0].idx < 0) -+ info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT; -+ - info->control.rates[0].flags = rate_flags; - info->control.rates[0].count = min_t(u8, rate_retries + 1, - local->hw.max_rate_tries); diff --git a/package/kernel/mac80211/patches/343-mac80211-minstrel_ht-improve-sample-rate-skip-logic.patch b/package/kernel/mac80211/patches/343-mac80211-minstrel_ht-improve-sample-rate-skip-logic.patch deleted file mode 100644 index 55ff817009..0000000000 --- a/package/kernel/mac80211/patches/343-mac80211-minstrel_ht-improve-sample-rate-skip-logic.patch +++ /dev/null @@ -1,77 +0,0 @@ -From: Felix Fietkau -Date: Thu, 3 Mar 2016 23:20:06 +0100 -Subject: [PATCH] mac80211: minstrel_ht: improve sample rate skip logic - -There were a few issues that were slowing down the process of finding -the optimal rate, especially on devices with multi-rate retry -limitations: - -When max_tp_rate[0] was slower than max_tp_rate[1], the code did not -sample max_tp_rate[1], which would often allow it to switch places with -max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the -rate is otherwise good). - -Also, sample attempts of rates between max_tp_rate[0] and [1] were being -ignored in this case, because the code only checked if the rate was -slower than [1]. - -Fix this by checking against the fastest / second fastest max_tp_rate -instead of assuming a specific order between the two. - -In my tests this patch significantly reduces the time until minstrel_ht -finds the optimal rate right after assoc - -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -958,6 +958,7 @@ minstrel_get_sample_rate(struct minstrel - struct minstrel_rate_stats *mrs; - struct minstrel_mcs_group_data *mg; - unsigned int sample_dur, sample_group, cur_max_tp_streams; -+ int tp_rate1, tp_rate2; - int sample_idx = 0; - - if (mi->sample_wait > 0) { -@@ -979,14 +980,22 @@ minstrel_get_sample_rate(struct minstrel - mrs = &mg->rates[sample_idx]; - sample_idx += sample_group * MCS_GROUP_RATES; - -+ /* Set tp_rate1, tp_rate2 to the highest / second highest max_tp_rate */ -+ if (minstrel_get_duration(mi->max_tp_rate[0]) > -+ minstrel_get_duration(mi->max_tp_rate[1])) { -+ tp_rate1 = mi->max_tp_rate[1]; -+ tp_rate2 = mi->max_tp_rate[0]; -+ } else { -+ tp_rate1 = mi->max_tp_rate[0]; -+ tp_rate2 = mi->max_tp_rate[1]; -+ } -+ - /* - * Sampling might add some overhead (RTS, no aggregation) -- * to the frame. Hence, don't use sampling for the currently -- * used rates. -+ * to the frame. Hence, don't use sampling for the highest currently -+ * used highest throughput or probability rate. - */ -- if (sample_idx == mi->max_tp_rate[0] || -- sample_idx == mi->max_tp_rate[1] || -- sample_idx == mi->max_prob_rate) -+ if (sample_idx == mi->max_tp_rate[0] || sample_idx == mi->max_prob_rate) - return -1; - - /* -@@ -1001,10 +1010,10 @@ minstrel_get_sample_rate(struct minstrel - * if the link is working perfectly. - */ - -- cur_max_tp_streams = minstrel_mcs_groups[mi->max_tp_rate[0] / -+ cur_max_tp_streams = minstrel_mcs_groups[tp_rate1 / - MCS_GROUP_RATES].streams; - sample_dur = minstrel_get_duration(sample_idx); -- if (sample_dur >= minstrel_get_duration(mi->max_tp_rate[1]) && -+ if (sample_dur >= minstrel_get_duration(tp_rate2) && - (cur_max_tp_streams - 1 < - minstrel_mcs_groups[sample_group].streams || - sample_dur >= minstrel_get_duration(mi->max_prob_rate))) { diff --git a/package/kernel/mac80211/patches/344-0001-brcmfmac-change-function-name-for-brcmf_cfg80211_wai.patch b/package/kernel/mac80211/patches/344-0001-brcmfmac-change-function-name-for-brcmf_cfg80211_wai.patch deleted file mode 100644 index e3427de732..0000000000 --- a/package/kernel/mac80211/patches/344-0001-brcmfmac-change-function-name-for-brcmf_cfg80211_wai.patch +++ /dev/null @@ -1,99 +0,0 @@ -From: Arend van Spriel -Date: Wed, 17 Feb 2016 11:26:50 +0100 -Subject: [PATCH] brcmfmac: change function name for - brcmf_cfg80211_wait_vif_event_timeout() - -Dropping the '_timeout' from the function name as the fact that a timeout -value is passed makes it obvious a timeout is used. Also helps to keep code -lines a bit shorter and easier to stick to 80 char boundary. - -Reviewed-by: Hante Meuleman -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -564,8 +564,8 @@ struct wireless_dev *brcmf_ap_add_vif(st - } - - /* wait for firmware event */ -- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, -- BRCMF_VIF_EVENT_TIMEOUT); -+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD, -+ BRCMF_VIF_EVENT_TIMEOUT); - brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (!err) { - brcmf_err("timeout occurred\n"); -@@ -6395,8 +6395,9 @@ bool brcmf_cfg80211_vif_event_armed(stru - - return armed; - } --int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, -- u8 action, ulong timeout) -+ -+int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg, -+ u8 action, ulong timeout) - { - struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -@@ -402,8 +402,8 @@ bool brcmf_get_vif_state_any(struct brcm - void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif); - bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); --int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, -- u8 action, ulong timeout); -+int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg, -+ u8 action, ulong timeout); - s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, - struct brcmf_if *ifp, bool aborted, - bool fw_abort); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -@@ -1988,8 +1988,8 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8 - brcmf_cfg80211_arm_vif_event(cfg, NULL); - return err; - } -- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE, -- BRCMF_VIF_EVENT_TIMEOUT); -+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_CHANGE, -+ BRCMF_VIF_EVENT_TIMEOUT); - brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (!err) { - brcmf_err("No BRCMF_E_IF_CHANGE event received\n"); -@@ -2090,8 +2090,8 @@ static struct wireless_dev *brcmf_p2p_cr - } - - /* wait for firmware event */ -- err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD, -- BRCMF_VIF_EVENT_TIMEOUT); -+ err = brcmf_cfg80211_wait_vif_event(p2p->cfg, BRCMF_E_IF_ADD, -+ BRCMF_VIF_EVENT_TIMEOUT); - brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL); - brcmf_fweh_p2pdev_setup(pri_ifp, false); - if (!err) { -@@ -2180,8 +2180,8 @@ struct wireless_dev *brcmf_p2p_add_vif(s - } - - /* wait for firmware event */ -- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, -- BRCMF_VIF_EVENT_TIMEOUT); -+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD, -+ BRCMF_VIF_EVENT_TIMEOUT); - brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (!err) { - brcmf_err("timeout occurred\n"); -@@ -2274,8 +2274,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - } - if (!err) { - /* wait for firmware event */ -- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, -- BRCMF_VIF_EVENT_TIMEOUT); -+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL, -+ BRCMF_VIF_EVENT_TIMEOUT); - if (!err) - err = -EIO; - else diff --git a/package/kernel/mac80211/patches/344-0002-brcmfmac-Limit-memory-allocs-to-64K.patch b/package/kernel/mac80211/patches/344-0002-brcmfmac-Limit-memory-allocs-to-64K.patch deleted file mode 100644 index 9c336f774f..0000000000 --- a/package/kernel/mac80211/patches/344-0002-brcmfmac-Limit-memory-allocs-to-64K.patch +++ /dev/null @@ -1,127 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:51 +0100 -Subject: [PATCH] brcmfmac: Limit memory allocs to <64K - -Some systems have problems with allocating memory allocation larger -then 64K. Often on unload/load or suspend/resume a failure is -reported: Could not allocate wiphy device. This patch makes the -escan intermediate storage buf dynamically allocated, and smaller -than 64K. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -1125,7 +1125,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy - - /* Arm scan timeout timer */ - mod_timer(&cfg->escan_timeout, jiffies + -- WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000); -+ BRCMF_ESCAN_TIMER_INTERVAL_MS * HZ / 1000); - - return 0; - -@@ -3020,7 +3020,7 @@ brcmf_cfg80211_escan_handler(struct brcm - - list = (struct brcmf_scan_results *) - cfg->escan_info.escan_buf; -- if (bi_length > WL_ESCAN_BUF_SIZE - list->buflen) { -+ if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) { - brcmf_err("Buffer is too small: ignoring\n"); - goto exit; - } -@@ -3033,8 +3033,8 @@ brcmf_cfg80211_escan_handler(struct brcm - bss_info_le)) - goto exit; - } -- memcpy(&(cfg->escan_info.escan_buf[list->buflen]), -- bss_info_le, bi_length); -+ memcpy(&cfg->escan_info.escan_buf[list->buflen], bss_info_le, -+ bi_length); - list->version = le32_to_cpu(bss_info_le->version); - list->buflen += bi_length; - list->count++; -@@ -5402,14 +5402,14 @@ static void brcmf_deinit_priv_mem(struct - { - kfree(cfg->conf); - cfg->conf = NULL; -- kfree(cfg->escan_ioctl_buf); -- cfg->escan_ioctl_buf = NULL; - kfree(cfg->extra_buf); - cfg->extra_buf = NULL; - kfree(cfg->wowl.nd); - cfg->wowl.nd = NULL; - kfree(cfg->wowl.nd_info); - cfg->wowl.nd_info = NULL; -+ kfree(cfg->escan_info.escan_buf); -+ cfg->escan_info.escan_buf = NULL; - } - - static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg) -@@ -5417,9 +5417,6 @@ static s32 brcmf_init_priv_mem(struct br - cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL); - if (!cfg->conf) - goto init_priv_mem_out; -- cfg->escan_ioctl_buf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); -- if (!cfg->escan_ioctl_buf) -- goto init_priv_mem_out; - cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); - if (!cfg->extra_buf) - goto init_priv_mem_out; -@@ -5431,6 +5428,9 @@ static s32 brcmf_init_priv_mem(struct br - GFP_KERNEL); - if (!cfg->wowl.nd_info) - goto init_priv_mem_out; -+ cfg->escan_info.escan_buf = kzalloc(BRCMF_ESCAN_BUF_SIZE, GFP_KERNEL); -+ if (!cfg->escan_info.escan_buf) -+ goto init_priv_mem_out; - - return 0; - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -@@ -28,8 +28,11 @@ - #define WL_ROAM_TRIGGER_LEVEL -75 - #define WL_ROAM_DELTA 20 - --#define WL_ESCAN_BUF_SIZE (1024 * 64) --#define WL_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */ -+/* Keep BRCMF_ESCAN_BUF_SIZE below 64K (65536). Allocing over 64K can be -+ * problematic on some systems and should be avoided. -+ */ -+#define BRCMF_ESCAN_BUF_SIZE 65000 -+#define BRCMF_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */ - - #define WL_ESCAN_ACTION_START 1 - #define WL_ESCAN_ACTION_CONTINUE 2 -@@ -205,7 +208,7 @@ enum wl_escan_state { - - struct escan_info { - u32 escan_state; -- u8 escan_buf[WL_ESCAN_BUF_SIZE]; -+ u8 *escan_buf; - struct wiphy *wiphy; - struct brcmf_if *ifp; - s32 (*run)(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp, -@@ -278,7 +281,6 @@ struct brcmf_cfg80211_wowl { - * @escan_info: escan information. - * @escan_timeout: Timer for catch scan timeout. - * @escan_timeout_work: scan timeout worker. -- * @escan_ioctl_buf: dongle command buffer for escan commands. - * @vif_list: linked list of vif instances. - * @vif_cnt: number of vif instances. - * @vif_event: vif event signalling. -@@ -309,7 +311,6 @@ struct brcmf_cfg80211_info { - struct escan_info escan_info; - struct timer_list escan_timeout; - struct work_struct escan_timeout_work; -- u8 *escan_ioctl_buf; - struct list_head vif_list; - struct brcmf_cfg80211_vif_event vif_event; - struct completion vif_disabled; diff --git a/package/kernel/mac80211/patches/344-0003-brcmfmac-check-for-wowl-support-before-enumerating-f.patch b/package/kernel/mac80211/patches/344-0003-brcmfmac-check-for-wowl-support-before-enumerating-f.patch deleted file mode 100644 index ee3d9f37a8..0000000000 --- a/package/kernel/mac80211/patches/344-0003-brcmfmac-check-for-wowl-support-before-enumerating-f.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Franky Lin -Date: Wed, 17 Feb 2016 11:26:52 +0100 -Subject: [PATCH] brcmfmac: check for wowl support before enumerating feature - flag - -In some cases wiphy->wowlan could be NULL if firmware doesn't have the -support. Driver should check for support before walking down the feature -flags. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Hante Meuleman -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -6594,7 +6594,8 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_RANDOM_MAC)) { - wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR; - #ifdef CONFIG_PM -- if (wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT) -+ if (wiphy->wowlan && -+ wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT) - wiphy->features |= NL80211_FEATURE_ND_RANDOM_MAC_ADDR; - #endif - } diff --git a/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch b/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch deleted file mode 100644 index c52cac87b9..0000000000 --- a/package/kernel/mac80211/patches/344-0004-brcmfmac-Configure-country-code-using-device-specifi.patch +++ /dev/null @@ -1,214 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:53 +0100 -Subject: [PATCH] brcmfmac: Configure country code using device specific - settings - -Country code configuration in a device is a device specific -operation. For this the country code as specified by reg notifier -(iso3166 alpha2) needs to be translated to a device specific -country locale and revision number. This patch adds this -translation and puts a placeholder in the device specific settings -where the translation table can be stored. Additional patches will -be needed to read these tables from for example device platform -data. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -6405,28 +6405,85 @@ int brcmf_cfg80211_wait_vif_event(struct - vif_event_equals(event, action), timeout); - } - -+static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], -+ struct brcmf_fil_country_le *ccreq) -+{ -+ struct cc_translate *country_codes; -+ struct cc_entry *cc; -+ s32 found_index; -+ int i; -+ -+ country_codes = drvr->settings->country_codes; -+ if (!country_codes) { -+ brcmf_dbg(TRACE, "No country codes configured for device\n"); -+ return -EINVAL; -+ } -+ -+ if ((alpha2[0] == ccreq->country_abbrev[0]) && -+ (alpha2[1] == ccreq->country_abbrev[1])) { -+ brcmf_dbg(TRACE, "Country code already set\n"); -+ return -EAGAIN; -+ } -+ -+ found_index = -1; -+ for (i = 0; i < country_codes->table_size; i++) { -+ cc = &country_codes->table[i]; -+ if ((cc->iso3166[0] == '\0') && (found_index == -1)) -+ found_index = i; -+ if ((cc->iso3166[0] == alpha2[0]) && -+ (cc->iso3166[1] == alpha2[1])) { -+ found_index = i; -+ break; -+ } -+ } -+ if (found_index == -1) { -+ brcmf_dbg(TRACE, "No country code match found\n"); -+ return -EINVAL; -+ } -+ memset(ccreq, 0, sizeof(*ccreq)); -+ ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev); -+ memcpy(ccreq->ccode, country_codes->table[found_index].cc, -+ BRCMF_COUNTRY_BUF_SZ); -+ ccreq->country_abbrev[0] = alpha2[0]; -+ ccreq->country_abbrev[1] = alpha2[1]; -+ ccreq->country_abbrev[2] = 0; -+ -+ return 0; -+} -+ - static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *req) - { - struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); - struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); - struct brcmf_fil_country_le ccreq; -+ s32 err; - int i; - -- brcmf_dbg(TRACE, "enter: initiator=%d, alpha=%c%c\n", req->initiator, -- req->alpha2[0], req->alpha2[1]); -- - /* ignore non-ISO3166 country codes */ - for (i = 0; i < sizeof(req->alpha2); i++) - if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') { -- brcmf_err("not a ISO3166 code\n"); -+ brcmf_err("not a ISO3166 code (0x%02x 0x%02x)\n", -+ req->alpha2[0], req->alpha2[1]); - return; - } -- memset(&ccreq, 0, sizeof(ccreq)); -- ccreq.rev = cpu_to_le32(-1); -- memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2)); -- if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) { -- brcmf_err("firmware rejected country setting\n"); -+ -+ brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator, -+ req->alpha2[0], req->alpha2[1]); -+ -+ err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq)); -+ if (err) { -+ brcmf_err("Country code iovar returned err = %d\n", err); -+ return; -+ } -+ -+ err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq); -+ if (err) -+ return; -+ -+ err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq)); -+ if (err) { -+ brcmf_err("Firmware rejected country setting\n"); - return; - } - brcmf_setup_wiphybands(wiphy); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -230,10 +230,8 @@ void brcmf_mp_attach(void) - int brcmf_mp_device_attach(struct brcmf_pub *drvr) - { - drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC); -- if (!drvr->settings) { -- brcmf_err("Failed to alloca storage space for settings\n"); -+ if (!drvr->settings) - return -ENOMEM; -- } - - drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz; - drvr->settings->p2p_enable = !!brcmf_p2p_enable; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -@@ -15,6 +15,8 @@ - #ifndef BRCMFMAC_COMMON_H - #define BRCMFMAC_COMMON_H - -+#include "fwil_types.h" -+ - extern const u8 ALLFFMAC[ETH_ALEN]; - - #define BRCMF_FW_ALTPATH_LEN 256 -@@ -39,6 +41,33 @@ struct brcmf_mp_global_t { - extern struct brcmf_mp_global_t brcmf_mp_global; - - /** -+ * struct cc_entry - Struct for translating user space country code (iso3166) to -+ * firmware country code and revision. -+ * -+ * @iso3166: iso3166 alpha 2 country code string. -+ * @cc: firmware country code string. -+ * @rev: firmware country code revision. -+ */ -+struct cc_entry { -+ char iso3166[BRCMF_COUNTRY_BUF_SZ]; -+ char cc[BRCMF_COUNTRY_BUF_SZ]; -+ s32 rev; -+}; -+ -+/** -+ * struct cc_translate - Struct for translating country codes as set by user -+ * space to a country code and rev which can be used by -+ * firmware. -+ * -+ * @table_size: number of entries in table (> 0) -+ * @table: dynamic array of 1 or more elements with translation information. -+ */ -+struct cc_translate { -+ int table_size; -+ struct cc_entry table[0]; -+}; -+ -+/** - * struct brcmf_mp_device - Device module paramaters. - * - * @sdiod_txglomsz: SDIO txglom size. -@@ -47,6 +76,7 @@ extern struct brcmf_mp_global_t brcmf_mp - * @feature_disable: Feature_disable bitmask. - * @fcmode: FWS flow control. - * @roamoff: Firmware roaming off? -+ * @country_codes: If available, pointer to struct for translating country codes - */ - struct brcmf_mp_device { - int sdiod_txglomsz; -@@ -56,6 +86,7 @@ struct brcmf_mp_device { - int fcmode; - bool roamoff; - bool ignore_probe_fail; -+ struct cc_translate *country_codes; - }; - - void brcmf_mp_attach(void); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -@@ -134,6 +134,8 @@ - #define BRCMF_PFN_MAC_OUI_ONLY BIT(0) - #define BRCMF_PFN_SET_MAC_UNASSOC BIT(1) - -+#define BRCMF_MCSSET_LEN 16 -+ - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { - BRCMF_JOIN_PREF_RSSI = 1, -@@ -279,7 +281,7 @@ struct brcmf_bss_info_le { - __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ - u8 flags; /* flags */ - u8 reserved[3]; /* Reserved for expansion of BSS properties */ -- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ -+ u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */ - - __le16 ie_offset; /* offset at which IEs start, from beginning */ - __le32 ie_length; /* byte length of Information Elements */ diff --git a/package/kernel/mac80211/patches/344-0005-brcmfmac-Add-length-checks-on-firmware-events.patch b/package/kernel/mac80211/patches/344-0005-brcmfmac-Add-length-checks-on-firmware-events.patch deleted file mode 100644 index 3e2e3503b6..0000000000 --- a/package/kernel/mac80211/patches/344-0005-brcmfmac-Add-length-checks-on-firmware-events.patch +++ /dev/null @@ -1,283 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:54 +0100 -Subject: [PATCH] brcmfmac: Add length checks on firmware events - -Add additional length checks on firmware events to create more -robust code. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Lei Zhang -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -3092,6 +3092,11 @@ brcmf_notify_sched_scan_results(struct b - - brcmf_dbg(SCAN, "Enter\n"); - -+ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { -+ brcmf_dbg(SCAN, "Event data to small. Ignore\n"); -+ return 0; -+ } -+ - if (e->event_code == BRCMF_E_PFN_NET_LOST) { - brcmf_dbg(SCAN, "PFN NET LOST event. Do Nothing\n"); - return 0; -@@ -3415,6 +3420,11 @@ brcmf_wowl_nd_results(struct brcmf_if *i - - brcmf_dbg(SCAN, "Enter\n"); - -+ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { -+ brcmf_dbg(SCAN, "Event data to small. Ignore\n"); -+ return 0; -+ } -+ - pfn_result = (struct brcmf_pno_scanresults_le *)data; - - if (e->event_code == BRCMF_E_PFN_NET_LOST) { ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -@@ -26,50 +26,6 @@ - #include "fwil.h" - - /** -- * struct brcm_ethhdr - broadcom specific ether header. -- * -- * @subtype: subtype for this packet. -- * @length: TODO: length of appended data. -- * @version: version indication. -- * @oui: OUI of this packet. -- * @usr_subtype: subtype for this OUI. -- */ --struct brcm_ethhdr { -- __be16 subtype; -- __be16 length; -- u8 version; -- u8 oui[3]; -- __be16 usr_subtype; --} __packed; -- --struct brcmf_event_msg_be { -- __be16 version; -- __be16 flags; -- __be32 event_type; -- __be32 status; -- __be32 reason; -- __be32 auth_type; -- __be32 datalen; -- u8 addr[ETH_ALEN]; -- char ifname[IFNAMSIZ]; -- u8 ifidx; -- u8 bsscfgidx; --} __packed; -- --/** -- * struct brcmf_event - contents of broadcom event packet. -- * -- * @eth: standard ether header. -- * @hdr: broadcom specific ether header. -- * @msg: common part of the actual event message. -- */ --struct brcmf_event { -- struct ethhdr eth; -- struct brcm_ethhdr hdr; -- struct brcmf_event_msg_be msg; --} __packed; -- --/** - * struct brcmf_fweh_queue_item - event item on event queue. - * - * @q: list element for queuing. -@@ -85,6 +41,7 @@ struct brcmf_fweh_queue_item { - u8 ifidx; - u8 ifaddr[ETH_ALEN]; - struct brcmf_event_msg_be emsg; -+ u32 datalen; - u8 data[0]; - }; - -@@ -294,6 +251,11 @@ static void brcmf_fweh_event_worker(stru - brcmf_dbg_hex_dump(BRCMF_EVENT_ON(), event->data, - min_t(u32, emsg.datalen, 64), - "event payload, len=%d\n", emsg.datalen); -+ if (emsg.datalen > event->datalen) { -+ brcmf_err("event invalid length header=%d, msg=%d\n", -+ event->datalen, emsg.datalen); -+ goto event_free; -+ } - - /* special handling of interface event */ - if (event->code == BRCMF_E_IF) { -@@ -439,7 +401,8 @@ int brcmf_fweh_activate_events(struct br - * dispatch the event to a registered handler (using worker). - */ - void brcmf_fweh_process_event(struct brcmf_pub *drvr, -- struct brcmf_event *event_packet) -+ struct brcmf_event *event_packet, -+ u32 packet_len) - { - enum brcmf_fweh_event_code code; - struct brcmf_fweh_info *fweh = &drvr->fweh; -@@ -459,6 +422,9 @@ void brcmf_fweh_process_event(struct brc - if (code != BRCMF_E_IF && !fweh->evt_handler[code]) - return; - -+ if (datalen > BRCMF_DCMD_MAXLEN) -+ return; -+ - if (in_interrupt()) - alloc_flag = GFP_ATOMIC; - -@@ -472,6 +438,7 @@ void brcmf_fweh_process_event(struct brc - /* use memcpy to get aligned event message */ - memcpy(&event->emsg, &event_packet->msg, sizeof(event->emsg)); - memcpy(event->data, data, datalen); -+ event->datalen = datalen; - memcpy(event->ifaddr, event_packet->eth.h_dest, ETH_ALEN); - - brcmf_fweh_queue_event(fweh, event); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h -@@ -27,7 +27,6 @@ - struct brcmf_pub; - struct brcmf_if; - struct brcmf_cfg80211_info; --struct brcmf_event; - - /* list of firmware events */ - #define BRCMF_FWEH_EVENT_ENUM_DEFLIST \ -@@ -180,13 +179,55 @@ enum brcmf_fweh_event_code { - /** - * definitions for event packet validation. - */ --#define BRCMF_EVENT_OUI_OFFSET 19 --#define BRCM_OUI "\x00\x10\x18" --#define DOT11_OUI_LEN 3 --#define BCMILCP_BCM_SUBTYPE_EVENT 1 -+#define BRCM_OUI "\x00\x10\x18" -+#define BCMILCP_BCM_SUBTYPE_EVENT 1 - - - /** -+ * struct brcm_ethhdr - broadcom specific ether header. -+ * -+ * @subtype: subtype for this packet. -+ * @length: TODO: length of appended data. -+ * @version: version indication. -+ * @oui: OUI of this packet. -+ * @usr_subtype: subtype for this OUI. -+ */ -+struct brcm_ethhdr { -+ __be16 subtype; -+ __be16 length; -+ u8 version; -+ u8 oui[3]; -+ __be16 usr_subtype; -+} __packed; -+ -+struct brcmf_event_msg_be { -+ __be16 version; -+ __be16 flags; -+ __be32 event_type; -+ __be32 status; -+ __be32 reason; -+ __be32 auth_type; -+ __be32 datalen; -+ u8 addr[ETH_ALEN]; -+ char ifname[IFNAMSIZ]; -+ u8 ifidx; -+ u8 bsscfgidx; -+} __packed; -+ -+/** -+ * struct brcmf_event - contents of broadcom event packet. -+ * -+ * @eth: standard ether header. -+ * @hdr: broadcom specific ether header. -+ * @msg: common part of the actual event message. -+ */ -+struct brcmf_event { -+ struct ethhdr eth; -+ struct brcm_ethhdr hdr; -+ struct brcmf_event_msg_be msg; -+} __packed; -+ -+/** - * struct brcmf_event_msg - firmware event message. - * - * @version: version information. -@@ -256,34 +297,35 @@ void brcmf_fweh_unregister(struct brcmf_ - enum brcmf_fweh_event_code code); - int brcmf_fweh_activate_events(struct brcmf_if *ifp); - void brcmf_fweh_process_event(struct brcmf_pub *drvr, -- struct brcmf_event *event_packet); -+ struct brcmf_event *event_packet, -+ u32 packet_len); - void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing); - - static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr, - struct sk_buff *skb) - { - struct brcmf_event *event_packet; -- u8 *data; - u16 usr_stype; - - /* only process events when protocol matches */ - if (skb->protocol != cpu_to_be16(ETH_P_LINK_CTL)) - return; - -+ if ((skb->len + ETH_HLEN) < sizeof(*event_packet)) -+ return; -+ - /* check for BRCM oui match */ - event_packet = (struct brcmf_event *)skb_mac_header(skb); -- data = (u8 *)event_packet; -- data += BRCMF_EVENT_OUI_OFFSET; -- if (memcmp(BRCM_OUI, data, DOT11_OUI_LEN)) -+ if (memcmp(BRCM_OUI, &event_packet->hdr.oui[0], -+ sizeof(event_packet->hdr.oui))) - return; - - /* final match on usr_subtype */ -- data += DOT11_OUI_LEN; -- usr_stype = get_unaligned_be16(data); -+ usr_stype = get_unaligned_be16(&event_packet->hdr.usr_subtype); - if (usr_stype != BCMILCP_BCM_SUBTYPE_EVENT) - return; - -- brcmf_fweh_process_event(drvr, event_packet); -+ brcmf_fweh_process_event(drvr, event_packet, skb->len + ETH_HLEN); - } - - #endif /* FWEH_H_ */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -@@ -1361,6 +1361,11 @@ int brcmf_p2p_notify_action_frame_rx(str - u16 mgmt_type; - u8 action; - -+ if (e->datalen < sizeof(*rxframe)) { -+ brcmf_dbg(SCAN, "Event data to small. Ignore\n"); -+ return 0; -+ } -+ - ch.chspec = be16_to_cpu(rxframe->chanspec); - cfg->d11inf.decchspec(&ch); - /* Check if wpa_supplicant has registered for this frame */ -@@ -1858,6 +1863,11 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere - brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code, - e->reason); - -+ if (e->datalen < sizeof(*rxframe)) { -+ brcmf_dbg(SCAN, "Event data to small. Ignore\n"); -+ return 0; -+ } -+ - ch.chspec = be16_to_cpu(rxframe->chanspec); - cfg->d11inf.decchspec(&ch); - diff --git a/package/kernel/mac80211/patches/344-0006-brcmfmac-add-neighbor-discovery-offload-ip-address-t.patch b/package/kernel/mac80211/patches/344-0006-brcmfmac-add-neighbor-discovery-offload-ip-address-t.patch deleted file mode 100644 index 888ad5b050..0000000000 --- a/package/kernel/mac80211/patches/344-0006-brcmfmac-add-neighbor-discovery-offload-ip-address-t.patch +++ /dev/null @@ -1,333 +0,0 @@ -From: Franky Lin -Date: Wed, 17 Feb 2016 11:26:55 +0100 -Subject: [PATCH] brcmfmac: add neighbor discovery offload ip address table - configuration - -Configure ipv6 address for neighbor discovery offload ip table in -firmware obtained through ipv6 address notification callback. - -Reviewed-by: Hante Meuleman -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -456,7 +456,7 @@ send_key_to_dongle(struct brcmf_if *ifp, - } - - static s32 --brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) -+brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable) - { - s32 err; - u32 mode; -@@ -484,6 +484,15 @@ brcmf_configure_arp_offload(struct brcmf - enable, mode); - } - -+ err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable); -+ if (err) { -+ brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n", -+ enable, err); -+ err = 0; -+ } else -+ brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n", -+ enable, mode); -+ - return err; - } - -@@ -3543,7 +3552,7 @@ static s32 brcmf_cfg80211_resume(struct - brcmf_report_wowl_wakeind(wiphy, ifp); - brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0); - brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0); -- brcmf_configure_arp_offload(ifp, true); -+ brcmf_configure_arp_nd_offload(ifp, true); - brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, - cfg->wowl.pre_pmmode); - cfg->wowl.active = false; -@@ -3567,7 +3576,7 @@ static void brcmf_configure_wowl(struct - - brcmf_dbg(TRACE, "Suspend, wowl config.\n"); - -- brcmf_configure_arp_offload(ifp, false); -+ brcmf_configure_arp_nd_offload(ifp, false); - brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode); - brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX); - -@@ -4336,7 +4345,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - - if (!mbss) { - brcmf_set_mpc(ifp, 0); -- brcmf_configure_arp_offload(ifp, false); -+ brcmf_configure_arp_nd_offload(ifp, false); - } - - /* find the RSN_IE */ -@@ -4482,7 +4491,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - exit: - if ((err) && (!mbss)) { - brcmf_set_mpc(ifp, 1); -- brcmf_configure_arp_offload(ifp, true); -+ brcmf_configure_arp_nd_offload(ifp, true); - } - return err; - } -@@ -4540,7 +4549,7 @@ static int brcmf_cfg80211_stop_ap(struct - brcmf_err("bss_enable config failed %d\n", err); - } - brcmf_set_mpc(ifp, 1); -- brcmf_configure_arp_offload(ifp, true); -+ brcmf_configure_arp_nd_offload(ifp, true); - clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); - brcmf_net_setcarrier(ifp, false); - -@@ -6287,7 +6296,7 @@ static s32 brcmf_config_dongle(struct br - if (err) - goto default_conf_out; - -- brcmf_configure_arp_offload(ifp, true); -+ brcmf_configure_arp_nd_offload(ifp, true); - - cfg->dongle_up = true; - default_conf_out: ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -20,6 +20,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - -@@ -172,6 +174,35 @@ _brcmf_set_mac_address(struct work_struc - } - } - -+#if IS_ENABLED(CONFIG_IPV6) -+static void _brcmf_update_ndtable(struct work_struct *work) -+{ -+ struct brcmf_if *ifp; -+ int i, ret; -+ -+ ifp = container_of(work, struct brcmf_if, ndoffload_work); -+ -+ /* clear the table in firmware */ -+ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip_clear", NULL, 0); -+ if (ret) { -+ brcmf_dbg(TRACE, "fail to clear nd ip table err:%d\n", ret); -+ return; -+ } -+ -+ for (i = 0; i < ifp->ipv6addr_idx; i++) { -+ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip", -+ &ifp->ipv6_addr_tbl[i], -+ sizeof(struct in6_addr)); -+ if (ret) -+ brcmf_err("add nd ip err %d\n", ret); -+ } -+} -+#else -+static void _brcmf_update_ndtable(struct work_struct *work) -+{ -+} -+#endif -+ - static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr) - { - struct brcmf_if *ifp = netdev_priv(ndev); -@@ -685,6 +716,7 @@ int brcmf_net_attach(struct brcmf_if *if - - INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); - INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); -+ INIT_WORK(&ifp->ndoffload_work, _brcmf_update_ndtable); - - if (rtnl_locked) - err = register_netdevice(ndev); -@@ -884,6 +916,7 @@ static void brcmf_del_if(struct brcmf_pu - if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { - cancel_work_sync(&ifp->setmacaddr_work); - cancel_work_sync(&ifp->multicast_work); -+ cancel_work_sync(&ifp->ndoffload_work); - } - brcmf_net_detach(ifp->ndev); - } else { -@@ -1025,6 +1058,56 @@ static int brcmf_inetaddr_changed(struct - } - #endif - -+#if IS_ENABLED(CONFIG_IPV6) -+static int brcmf_inet6addr_changed(struct notifier_block *nb, -+ unsigned long action, void *data) -+{ -+ struct brcmf_pub *drvr = container_of(nb, struct brcmf_pub, -+ inet6addr_notifier); -+ struct inet6_ifaddr *ifa = data; -+ struct brcmf_if *ifp; -+ int i; -+ struct in6_addr *table; -+ -+ /* Only handle primary interface */ -+ ifp = drvr->iflist[0]; -+ if (!ifp) -+ return NOTIFY_DONE; -+ if (ifp->ndev != ifa->idev->dev) -+ return NOTIFY_DONE; -+ -+ table = ifp->ipv6_addr_tbl; -+ for (i = 0; i < NDOL_MAX_ENTRIES; i++) -+ if (ipv6_addr_equal(&ifa->addr, &table[i])) -+ break; -+ -+ switch (action) { -+ case NETDEV_UP: -+ if (i == NDOL_MAX_ENTRIES) { -+ if (ifp->ipv6addr_idx < NDOL_MAX_ENTRIES) { -+ table[ifp->ipv6addr_idx++] = ifa->addr; -+ } else { -+ for (i = 0; i < NDOL_MAX_ENTRIES - 1; i++) -+ table[i] = table[i + 1]; -+ table[NDOL_MAX_ENTRIES - 1] = ifa->addr; -+ } -+ } -+ break; -+ case NETDEV_DOWN: -+ if (i < NDOL_MAX_ENTRIES) -+ for (; i < ifp->ipv6addr_idx; i++) -+ table[i] = table[i + 1]; -+ break; -+ default: -+ break; -+ } -+ -+ schedule_work(&ifp->ndoffload_work); -+ -+ return NOTIFY_OK; -+} -+#endif -+ - int brcmf_attach(struct device *dev) - { - struct brcmf_pub *drvr = NULL; -@@ -1164,30 +1247,41 @@ int brcmf_bus_start(struct device *dev) - #ifdef CONFIG_INET - drvr->inetaddr_notifier.notifier_call = brcmf_inetaddr_changed; - ret = register_inetaddr_notifier(&drvr->inetaddr_notifier); -+ if (ret) -+ goto fail; -+ -+#if IS_ENABLED(CONFIG_IPV6) -+ drvr->inet6addr_notifier.notifier_call = brcmf_inet6addr_changed; -+ ret = register_inet6addr_notifier(&drvr->inet6addr_notifier); -+ if (ret) { -+ unregister_inetaddr_notifier(&drvr->inetaddr_notifier); -+ goto fail; -+ } - #endif -+#endif /* CONFIG_INET */ -+ -+ return 0; - - fail: -- if (ret < 0) { -- brcmf_err("failed: %d\n", ret); -- if (drvr->config) { -- brcmf_cfg80211_detach(drvr->config); -- drvr->config = NULL; -- } -- if (drvr->fws) { -- brcmf_fws_del_interface(ifp); -- brcmf_fws_deinit(drvr); -- } -- if (ifp) -- brcmf_net_detach(ifp->ndev); -- if (p2p_ifp) -- brcmf_net_detach(p2p_ifp->ndev); -- drvr->iflist[0] = NULL; -- drvr->iflist[1] = NULL; -- if (brcmf_ignoring_probe_fail(drvr)) -- ret = 0; -- return ret; -+ brcmf_err("failed: %d\n", ret); -+ if (drvr->config) { -+ brcmf_cfg80211_detach(drvr->config); -+ drvr->config = NULL; -+ } -+ if (drvr->fws) { -+ brcmf_fws_del_interface(ifp); -+ brcmf_fws_deinit(drvr); - } -- return 0; -+ if (ifp) -+ brcmf_net_detach(ifp->ndev); -+ if (p2p_ifp) -+ brcmf_net_detach(p2p_ifp->ndev); -+ drvr->iflist[0] = NULL; -+ drvr->iflist[1] = NULL; -+ if (brcmf_ignoring_probe_fail(drvr)) -+ ret = 0; -+ -+ return ret; - } - - void brcmf_bus_add_txhdrlen(struct device *dev, uint len) -@@ -1237,6 +1331,10 @@ void brcmf_detach(struct device *dev) - unregister_inetaddr_notifier(&drvr->inetaddr_notifier); - #endif - -+#if IS_ENABLED(CONFIG_IPV6) -+ unregister_inet6addr_notifier(&drvr->inet6addr_notifier); -+#endif -+ - /* stop firmware event handling */ - brcmf_fweh_detach(drvr); - if (drvr->config) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -48,6 +48,8 @@ - */ - #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32 - -+#define NDOL_MAX_ENTRIES 8 -+ - /** - * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info - * -@@ -143,6 +145,7 @@ struct brcmf_pub { - #endif - - struct notifier_block inetaddr_notifier; -+ struct notifier_block inet6addr_notifier; - struct brcmf_mp_device *settings; - }; - -@@ -175,6 +178,7 @@ enum brcmf_netif_stop_reason { - * @stats: interface specific network statistics. - * @setmacaddr_work: worker object for setting mac address. - * @multicast_work: worker object for multicast provisioning. -+ * @ndoffload_work: worker object for neighbor discovery offload configuration. - * @fws_desc: interface specific firmware-signalling descriptor. - * @ifidx: interface index in device firmware. - * @bsscfgidx: index of bss associated with this interface. -@@ -191,6 +195,7 @@ struct brcmf_if { - struct net_device_stats stats; - struct work_struct setmacaddr_work; - struct work_struct multicast_work; -+ struct work_struct ndoffload_work; - struct brcmf_fws_mac_descriptor *fws_desc; - int ifidx; - s32 bsscfgidx; -@@ -199,6 +204,8 @@ struct brcmf_if { - spinlock_t netif_stop_lock; - atomic_t pend_8021x_cnt; - wait_queue_head_t pend_8021x_wait; -+ struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES]; -+ u8 ipv6addr_idx; - }; - - struct brcmf_skb_reorder_data { diff --git a/package/kernel/mac80211/patches/344-0007-brcmfmac-check-return-for-ARP-ip-setting-iovar.patch b/package/kernel/mac80211/patches/344-0007-brcmfmac-check-return-for-ARP-ip-setting-iovar.patch deleted file mode 100644 index 68de8ed2a2..0000000000 --- a/package/kernel/mac80211/patches/344-0007-brcmfmac-check-return-for-ARP-ip-setting-iovar.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: Franky Lin -Date: Wed, 17 Feb 2016 11:26:56 +0100 -Subject: [PATCH] brcmfmac: check return for ARP ip setting iovar - -The return value of iovar set function should be saved and checked. - -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Hante Meuleman -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -1039,14 +1039,14 @@ static int brcmf_inetaddr_changed(struct - return NOTIFY_OK; - } - for (i = 0; i < ARPOL_MAX_ENTRIES; i++) { -- if (addr_table[i] != 0) { -- brcmf_fil_iovar_data_set(ifp, -- "arp_hostip", &addr_table[i], -- sizeof(addr_table[i])); -- if (ret) -- brcmf_err("add arp ip err %d\n", -- ret); -- } -+ if (addr_table[i] == 0) -+ continue; -+ ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip", -+ &addr_table[i], -+ sizeof(addr_table[i])); -+ if (ret) -+ brcmf_err("add arp ip err %d\n", -+ ret); - } - } - break; diff --git a/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch b/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch deleted file mode 100644 index 3de0f64d56..0000000000 --- a/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch +++ /dev/null @@ -1,73 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:57 +0100 -Subject: [PATCH] brcmfmac: use device memsize config from fw if defined - -Newer type pcie devices have memory which get shared between fw and -hw. The division of this memory is done firmware compile time. As a -result the ramsize as used by driver needs to be adjusted for this. -This is done by reading the memory size from the firmware. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -207,6 +207,10 @@ static struct brcmf_firmware_mapping brc - #define BRCMF_PCIE_CFGREG_REG_BAR3_CONFIG 0x4F4 - #define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB 3 - -+/* Magic number at a magic location to find RAM size */ -+#define BRCMF_RAMSIZE_MAGIC 0x534d4152 /* SMAR */ -+#define BRCMF_RAMSIZE_OFFSET 0x6c -+ - - struct brcmf_pcie_console { - u32 base_addr; -@@ -1412,6 +1416,28 @@ static const struct brcmf_bus_ops brcmf_ - }; - - -+static void -+brcmf_pcie_adjust_ramsize(struct brcmf_pciedev_info *devinfo, u8 *data, -+ u32 data_len) -+{ -+ __le32 *field; -+ u32 newsize; -+ -+ if (data_len < BRCMF_RAMSIZE_OFFSET + 8) -+ return; -+ -+ field = (__le32 *)&data[BRCMF_RAMSIZE_OFFSET]; -+ if (le32_to_cpup(field) != BRCMF_RAMSIZE_MAGIC) -+ return; -+ field++; -+ newsize = le32_to_cpup(field); -+ -+ brcmf_dbg(PCIE, "Found ramsize info in FW, adjusting to 0x%x\n", -+ newsize); -+ devinfo->ci->ramsize = newsize; -+} -+ -+ - static int - brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo, - u32 sharedram_addr) -@@ -1694,6 +1720,13 @@ static void brcmf_pcie_setup(struct devi - - brcmf_pcie_attach(devinfo); - -+ /* Some of the firmwares have the size of the memory of the device -+ * defined inside the firmware. This is because part of the memory in -+ * the device is shared and the devision is determined by FW. Parse -+ * the firmware and adjust the chip memory size now. -+ */ -+ brcmf_pcie_adjust_ramsize(devinfo, (u8 *)fw->data, fw->size); -+ - ret = brcmf_pcie_download_fw_nvram(devinfo, fw, nvram, nvram_len); - if (ret) - goto fail; diff --git a/package/kernel/mac80211/patches/344-0009-brcmfmac-use-bar1-window-size-as-provided-by-pci-sub.patch b/package/kernel/mac80211/patches/344-0009-brcmfmac-use-bar1-window-size-as-provided-by-pci-sub.patch deleted file mode 100644 index ca03ffe4b0..0000000000 --- a/package/kernel/mac80211/patches/344-0009-brcmfmac-use-bar1-window-size-as-provided-by-pci-sub.patch +++ /dev/null @@ -1,58 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:58 +0100 -Subject: [PATCH] brcmfmac: use bar1 window size as provided by pci subsystem - -The PCIE bar1 window size is specified by chip. Currently the -ioremap of bar1 was using a define which always matched the size -of bar1, but newer chips can have a different bar1 sizes. With -this patch the ioremap will be called with the by chip provided -window size. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -72,7 +72,6 @@ static struct brcmf_firmware_mapping brc - - #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */ - --#define BRCMF_PCIE_TCM_MAP_SIZE (4096 * 1024) - #define BRCMF_PCIE_REG_MAP_SIZE (32 * 1024) - - /* backplane addres space accessed by BAR0 */ -@@ -252,7 +251,6 @@ struct brcmf_pciedev_info { - char nvram_name[BRCMF_FW_NAME_LEN]; - void __iomem *regs; - void __iomem *tcm; -- u32 tcm_size; - u32 ram_base; - u32 ram_size; - struct brcmf_chip *ci; -@@ -1592,8 +1590,7 @@ static int brcmf_pcie_get_resource(struc - } - - devinfo->regs = ioremap_nocache(bar0_addr, BRCMF_PCIE_REG_MAP_SIZE); -- devinfo->tcm = ioremap_nocache(bar1_addr, BRCMF_PCIE_TCM_MAP_SIZE); -- devinfo->tcm_size = BRCMF_PCIE_TCM_MAP_SIZE; -+ devinfo->tcm = ioremap_nocache(bar1_addr, bar1_size); - - if (!devinfo->regs || !devinfo->tcm) { - brcmf_err("ioremap() failed (%p,%p)\n", devinfo->regs, -@@ -1602,8 +1599,9 @@ static int brcmf_pcie_get_resource(struc - } - brcmf_dbg(PCIE, "Phys addr : reg space = %p base addr %#016llx\n", - devinfo->regs, (unsigned long long)bar0_addr); -- brcmf_dbg(PCIE, "Phys addr : mem space = %p base addr %#016llx\n", -- devinfo->tcm, (unsigned long long)bar1_addr); -+ brcmf_dbg(PCIE, "Phys addr : mem space = %p base addr %#016llx size 0x%x\n", -+ devinfo->tcm, (unsigned long long)bar1_addr, -+ (unsigned int)bar1_size); - - return 0; - } diff --git a/package/kernel/mac80211/patches/344-0010-brcmfmac-add-support-for-the-PCIE-4366c0-chip.patch b/package/kernel/mac80211/patches/344-0010-brcmfmac-add-support-for-the-PCIE-4366c0-chip.patch deleted file mode 100644 index e4a8f305cf..0000000000 --- a/package/kernel/mac80211/patches/344-0010-brcmfmac-add-support-for-the-PCIE-4366c0-chip.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:26:59 +0100 -Subject: [PATCH] brcmfmac: add support for the PCIE 4366c0 chip - -A newer version of the 4366 PCIE chip has been released. Add -support for this version of the chip. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -53,6 +53,7 @@ BRCMF_FW_NVRAM_DEF(4358, "brcmfmac4358-p - BRCMF_FW_NVRAM_DEF(4359, "brcmfmac4359-pcie.bin", "brcmfmac4359-pcie.txt"); - BRCMF_FW_NVRAM_DEF(4365B, "brcmfmac4365b-pcie.bin", "brcmfmac4365b-pcie.txt"); - BRCMF_FW_NVRAM_DEF(4366B, "brcmfmac4366b-pcie.bin", "brcmfmac4366b-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4366C, "brcmfmac4366c-pcie.bin", "brcmfmac4366c-pcie.txt"); - BRCMF_FW_NVRAM_DEF(4371, "brcmfmac4371-pcie.bin", "brcmfmac4371-pcie.txt"); - - static struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = { -@@ -66,7 +67,8 @@ static struct brcmf_firmware_mapping brc - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4358_CHIP_ID, 0xFFFFFFFF, 4358), - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359), - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4365_CHIP_ID, 0xFFFFFFFF, 4365B), -- BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFFF, 4366B), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0x0000000F, 4366B), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFF0, 4366C), - BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4371_CHIP_ID, 0xFFFFFFFF, 4371), - }; - diff --git a/package/kernel/mac80211/patches/344-0011-brcmfmac-remove-pcie-gen1-support.patch b/package/kernel/mac80211/patches/344-0011-brcmfmac-remove-pcie-gen1-support.patch deleted file mode 100644 index f99f6dbf07..0000000000 --- a/package/kernel/mac80211/patches/344-0011-brcmfmac-remove-pcie-gen1-support.patch +++ /dev/null @@ -1,221 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:00 +0100 -Subject: [PATCH] brcmfmac: remove pcie gen1 support - -The PCIE bus driver supports older gen1 (v1) chips, but there is no -actual device which is using this older pcie core which is supported -by brcmfmac. Remove all gen1 related code. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -100,9 +100,6 @@ static struct brcmf_firmware_mapping brc - #define BRCMF_PCIE_PCIE2REG_CONFIGDATA 0x124 - #define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX 0x140 - --#define BRCMF_PCIE_GENREV1 1 --#define BRCMF_PCIE_GENREV2 2 -- - #define BRCMF_PCIE2_INTA 0x01 - #define BRCMF_PCIE2_INTB 0x02 - -@@ -257,9 +254,7 @@ struct brcmf_pciedev_info { - u32 ram_size; - struct brcmf_chip *ci; - u32 coreid; -- u32 generic_corerev; - struct brcmf_pcie_shared_info shared; -- void (*ringbell)(struct brcmf_pciedev_info *devinfo); - wait_queue_head_t mbdata_resp_wait; - bool mbdata_completed; - bool irq_allocated; -@@ -746,68 +741,22 @@ static void brcmf_pcie_bus_console_read( - } - - --static __used void brcmf_pcie_ringbell_v1(struct brcmf_pciedev_info *devinfo) --{ -- u32 reg_value; -- -- brcmf_dbg(PCIE, "RING !\n"); -- reg_value = brcmf_pcie_read_reg32(devinfo, -- BRCMF_PCIE_PCIE2REG_MAILBOXINT); -- reg_value |= BRCMF_PCIE2_INTB; -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, -- reg_value); --} -- -- --static void brcmf_pcie_ringbell_v2(struct brcmf_pciedev_info *devinfo) --{ -- brcmf_dbg(PCIE, "RING !\n"); -- /* Any arbitrary value will do, lets use 1 */ -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1); --} -- -- - static void brcmf_pcie_intr_disable(struct brcmf_pciedev_info *devinfo) - { -- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) -- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK, -- 0); -- else -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, -- 0); -+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, 0); - } - - - static void brcmf_pcie_intr_enable(struct brcmf_pciedev_info *devinfo) - { -- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) -- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK, -- BRCMF_PCIE_INT_DEF); -- else -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, -- BRCMF_PCIE_MB_INT_D2H_DB | -- BRCMF_PCIE_MB_INT_FN0_0 | -- BRCMF_PCIE_MB_INT_FN0_1); -+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, -+ BRCMF_PCIE_MB_INT_D2H_DB | -+ BRCMF_PCIE_MB_INT_FN0_0 | -+ BRCMF_PCIE_MB_INT_FN0_1); - } - - --static irqreturn_t brcmf_pcie_quick_check_isr_v1(int irq, void *arg) --{ -- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg; -- u32 status; -- -- status = 0; -- pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTSTATUS, &status); -- if (status) { -- brcmf_pcie_intr_disable(devinfo); -- brcmf_dbg(PCIE, "Enter\n"); -- return IRQ_WAKE_THREAD; -- } -- return IRQ_NONE; --} -- -- --static irqreturn_t brcmf_pcie_quick_check_isr_v2(int irq, void *arg) -+static irqreturn_t brcmf_pcie_quick_check_isr(int irq, void *arg) - { - struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg; - -@@ -820,29 +769,7 @@ static irqreturn_t brcmf_pcie_quick_chec - } - - --static irqreturn_t brcmf_pcie_isr_thread_v1(int irq, void *arg) --{ -- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg; -- const struct pci_dev *pdev = devinfo->pdev; -- u32 status; -- -- devinfo->in_irq = true; -- status = 0; -- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status); -- brcmf_dbg(PCIE, "Enter %x\n", status); -- if (status) { -- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status); -- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP) -- brcmf_proto_msgbuf_rx_trigger(&devinfo->pdev->dev); -- } -- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP) -- brcmf_pcie_intr_enable(devinfo); -- devinfo->in_irq = false; -- return IRQ_HANDLED; --} -- -- --static irqreturn_t brcmf_pcie_isr_thread_v2(int irq, void *arg) -+static irqreturn_t brcmf_pcie_isr_thread(int irq, void *arg) - { - struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg; - u32 status; -@@ -879,28 +806,14 @@ static int brcmf_pcie_request_irq(struct - brcmf_pcie_intr_disable(devinfo); - - brcmf_dbg(PCIE, "Enter\n"); -- /* is it a v1 or v2 implementation */ -+ - pci_enable_msi(pdev); -- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) { -- if (request_threaded_irq(pdev->irq, -- brcmf_pcie_quick_check_isr_v1, -- brcmf_pcie_isr_thread_v1, -- IRQF_SHARED, "brcmf_pcie_intr", -- devinfo)) { -- pci_disable_msi(pdev); -- brcmf_err("Failed to request IRQ %d\n", pdev->irq); -- return -EIO; -- } -- } else { -- if (request_threaded_irq(pdev->irq, -- brcmf_pcie_quick_check_isr_v2, -- brcmf_pcie_isr_thread_v2, -- IRQF_SHARED, "brcmf_pcie_intr", -- devinfo)) { -- pci_disable_msi(pdev); -- brcmf_err("Failed to request IRQ %d\n", pdev->irq); -- return -EIO; -- } -+ if (request_threaded_irq(pdev->irq, brcmf_pcie_quick_check_isr, -+ brcmf_pcie_isr_thread, IRQF_SHARED, -+ "brcmf_pcie_intr", devinfo)) { -+ pci_disable_msi(pdev); -+ brcmf_err("Failed to request IRQ %d\n", pdev->irq); -+ return -EIO; - } - devinfo->irq_allocated = true; - return 0; -@@ -931,16 +844,9 @@ static void brcmf_pcie_release_irq(struc - if (devinfo->in_irq) - brcmf_err("Still in IRQ (processing) !!!\n"); - -- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) { -- status = 0; -- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status); -- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status); -- } else { -- status = brcmf_pcie_read_reg32(devinfo, -- BRCMF_PCIE_PCIE2REG_MAILBOXINT); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, -- status); -- } -+ status = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT); -+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, status); -+ - devinfo->irq_allocated = false; - } - -@@ -989,7 +895,9 @@ static int brcmf_pcie_ring_mb_ring_bell( - if (devinfo->state != BRCMFMAC_PCIE_STATE_UP) - return -EIO; - -- devinfo->ringbell(devinfo); -+ brcmf_dbg(PCIE, "RING !\n"); -+ /* Any arbitrary value will do, lets use 1 */ -+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1); - - return 0; - } -@@ -1503,9 +1411,6 @@ static int brcmf_pcie_download_fw_nvram( - u32 address; - u32 resetintr; - -- devinfo->ringbell = brcmf_pcie_ringbell_v2; -- devinfo->generic_corerev = BRCMF_PCIE_GENREV2; -- - brcmf_dbg(PCIE, "Halt ARM.\n"); - err = brcmf_pcie_enter_download_state(devinfo); - if (err) diff --git a/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch b/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch deleted file mode 100644 index 4adfc2dc64..0000000000 --- a/package/kernel/mac80211/patches/344-0012-brcmfmac-increase-timeout-for-tx-eapol.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:01 +0100 -Subject: [PATCH] brcmfmac: increase timeout for tx eapol - -When keys get set and updated this has to happen after eapol got -transmitted (without key or old key) before the key can be updated. -To make sure the order of sending eapol and configuring key is done -correctly a timeout for tx of eapol is applied. This timeout is set -to 50 msec, which is not always enough. Especially in AP mode and -key updates the timeout may need to be much longer because client(s) -can be in powersave. Increase the timeout from 50 to 950 msec. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -42,7 +42,7 @@ MODULE_AUTHOR("Broadcom Corporation"); - MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); - MODULE_LICENSE("Dual BSD/GPL"); - --#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(50) -+#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950) - - /* AMPDU rx reordering definitions */ - #define BRCMF_RXREORDER_FLOWID_OFFSET 0 diff --git a/package/kernel/mac80211/patches/344-0013-brcmfmac-move-module-init-and-exit-to-common.patch b/package/kernel/mac80211/patches/344-0013-brcmfmac-move-module-init-and-exit-to-common.patch deleted file mode 100644 index bd62781188..0000000000 --- a/package/kernel/mac80211/patches/344-0013-brcmfmac-move-module-init-and-exit-to-common.patch +++ /dev/null @@ -1,135 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:02 +0100 -Subject: [PATCH] brcmfmac: move module init and exit to common - -In preparation of module parameters for all devices the module init -and exit routines are moved to the common file. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -28,6 +28,10 @@ - #include "tracepoint.h" - #include "common.h" - -+MODULE_AUTHOR("Broadcom Corporation"); -+MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); -+MODULE_LICENSE("Dual BSD/GPL"); -+ - const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 -@@ -221,7 +225,7 @@ void __brcmf_dbg(u32 level, const char * - } - #endif - --void brcmf_mp_attach(void) -+static void brcmf_mp_attach(void) - { - strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path, - BRCMF_FW_ALTPATH_LEN); -@@ -249,3 +253,33 @@ void brcmf_mp_device_detach(struct brcmf - kfree(drvr->settings); - } - -+static int __init brcmfmac_module_init(void) -+{ -+ int err; -+ -+ /* Initialize debug system first */ -+ brcmf_debugfs_init(); -+ -+#ifdef CPTCFG_BRCMFMAC_SDIO -+ brcmf_sdio_init(); -+#endif -+ /* Initialize global module paramaters */ -+ brcmf_mp_attach(); -+ -+ /* Continue the initialization by registering the different busses */ -+ err = brcmf_core_init(); -+ if (err) -+ brcmf_debugfs_exit(); -+ -+ return err; -+} -+ -+static void __exit brcmfmac_module_exit(void) -+{ -+ brcmf_core_exit(); -+ brcmf_debugfs_exit(); -+} -+ -+module_init(brcmfmac_module_init); -+module_exit(brcmfmac_module_exit); -+ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -@@ -89,7 +89,6 @@ struct brcmf_mp_device { - struct cc_translate *country_codes; - }; - --void brcmf_mp_attach(void); - int brcmf_mp_device_attach(struct brcmf_pub *drvr); - void brcmf_mp_device_detach(struct brcmf_pub *drvr); - #ifdef DEBUG ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -38,10 +38,6 @@ - #include "pcie.h" - #include "common.h" - --MODULE_AUTHOR("Broadcom Corporation"); --MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); --MODULE_LICENSE("Dual BSD/GPL"); -- - #define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950) - - /* AMPDU rx reordering definitions */ -@@ -1422,19 +1418,15 @@ static void brcmf_driver_register(struct - } - static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); - --static int __init brcmfmac_module_init(void) -+int __init brcmf_core_init(void) - { -- brcmf_debugfs_init(); --#ifdef CPTCFG_BRCMFMAC_SDIO -- brcmf_sdio_init(); --#endif - if (!schedule_work(&brcmf_driver_work)) - return -EBUSY; - - return 0; - } - --static void __exit brcmfmac_module_exit(void) -+void __exit brcmf_core_exit(void) - { - cancel_work_sync(&brcmf_driver_work); - -@@ -1447,8 +1439,5 @@ static void __exit brcmfmac_module_exit( - #ifdef CPTCFG_BRCMFMAC_PCIE - brcmf_pcie_exit(); - #endif -- brcmf_debugfs_exit(); - } - --module_init(brcmfmac_module_init); --module_exit(brcmfmac_module_exit); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -227,5 +227,7 @@ void brcmf_txflowblock_if(struct brcmf_i - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); - void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on); -+int __init brcmf_core_init(void); -+void __exit brcmf_core_exit(void); - - #endif /* BRCMFMAC_CORE_H */ diff --git a/package/kernel/mac80211/patches/344-0014-brcmfmac-add-wowl-gtk-rekeying-offload-support.patch b/package/kernel/mac80211/patches/344-0014-brcmfmac-add-wowl-gtk-rekeying-offload-support.patch deleted file mode 100644 index 577ca8ed28..0000000000 --- a/package/kernel/mac80211/patches/344-0014-brcmfmac-add-wowl-gtk-rekeying-offload-support.patch +++ /dev/null @@ -1,260 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:03 +0100 -Subject: [PATCH] brcmfmac: add wowl gtk rekeying offload support - -This patch adds support for gtk rekeying offload and for gtk -rekeying failure during wowl mode. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -3526,6 +3526,10 @@ static void brcmf_report_wowl_wakeind(st - else - wakeup_data.net_detect = cfg->wowl.nd_info; - } -+ if (wakeind & BRCMF_WOWL_GTK_FAILURE) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_GTK_FAILURE\n"); -+ wakeup_data.gtk_rekey_failure = true; -+ } - } else { - wakeup = NULL; - } -@@ -3607,6 +3611,8 @@ static void brcmf_configure_wowl(struct - brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, - brcmf_wowl_nd_results); - } -+ if (wowl->gtk_rekey_failure) -+ wowl_config |= BRCMF_WOWL_GTK_FAILURE; - if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state)) - wowl_config |= BRCMF_WOWL_UNASSOC; - -@@ -4874,7 +4880,32 @@ static int brcmf_cfg80211_tdls_oper(stru - return ret; - } - --static struct cfg80211_ops wl_cfg80211_ops = { -+#ifdef CONFIG_PM -+static int -+brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev, -+ struct cfg80211_gtk_rekey_data *gtk) -+{ -+ struct brcmf_if *ifp = netdev_priv(ndev); -+ struct brcmf_gtk_keyinfo_le gtk_le; -+ int ret; -+ -+ brcmf_dbg(TRACE, "Enter, bssidx=%d\n", ifp->bsscfgidx); -+ -+ memcpy(gtk_le.kck, gtk->kck, sizeof(gtk_le.kck)); -+ memcpy(gtk_le.kek, gtk->kek, sizeof(gtk_le.kek)); -+ memcpy(gtk_le.replay_counter, gtk->replay_ctr, -+ sizeof(gtk_le.replay_counter)); -+ -+ ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", >k_le, -+ sizeof(gtk_le)); -+ if (ret < 0) -+ brcmf_err("gtk_key_info iovar failed: ret=%d\n", ret); -+ -+ return ret; -+} -+#endif -+ -+static struct cfg80211_ops brcmf_cfg80211_ops = { - .add_virtual_intf = brcmf_cfg80211_add_iface, - .del_virtual_intf = brcmf_cfg80211_del_iface, - .change_virtual_intf = brcmf_cfg80211_change_iface, -@@ -6139,19 +6170,18 @@ static void brcmf_wiphy_wowl_params(stru - { - #ifdef CONFIG_PM - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); -- s32 err; -- u32 wowl_cap; - - if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) { -- err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap); -- if (!err) { -- if (wowl_cap & BRCMF_WOWL_PFN_FOUND) { -- brcmf_wowlan_support.flags |= -- WIPHY_WOWLAN_NET_DETECT; -- init_waitqueue_head(&cfg->wowl.nd_data_wait); -- } -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) { -+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_NET_DETECT; -+ init_waitqueue_head(&cfg->wowl.nd_data_wait); - } - } -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) { -+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY; -+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE; -+ } -+ - wiphy->wowlan = &brcmf_wowlan_support; - #endif - } -@@ -6538,6 +6568,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev; - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; -+ struct cfg80211_ops *ops; - struct brcmf_cfg80211_vif *vif; - struct brcmf_if *ifp; - s32 err = 0; -@@ -6549,8 +6580,17 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - return NULL; - } - -+ ops = kzalloc(sizeof(*ops), GFP_KERNEL); -+ if (!ops) -+ return NULL; -+ -+ memcpy(ops, &brcmf_cfg80211_ops, sizeof(*ops)); - ifp = netdev_priv(ndev); -- wiphy = wiphy_new(&wl_cfg80211_ops, sizeof(struct brcmf_cfg80211_info)); -+#ifdef CONFIG_PM -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) -+ ops->set_rekey_data = brcmf_cfg80211_set_rekey_data; -+#endif -+ wiphy = wiphy_new(ops, sizeof(struct brcmf_cfg80211_info)); - if (!wiphy) { - brcmf_err("Could not allocate wiphy device\n"); - return NULL; -@@ -6560,6 +6600,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - - cfg = wiphy_priv(wiphy); - cfg->wiphy = wiphy; -+ cfg->ops = ops; - cfg->pub = drvr; - init_vif_event(&cfg->vif_event); - INIT_LIST_HEAD(&cfg->vif_list); -@@ -6686,6 +6727,7 @@ priv_out: - ifp->vif = NULL; - wiphy_out: - brcmf_free_wiphy(wiphy); -+ kfree(ops); - return NULL; - } - -@@ -6696,6 +6738,7 @@ void brcmf_cfg80211_detach(struct brcmf_ - - brcmf_btcoex_detach(cfg); - wiphy_unregister(cfg->wiphy); -+ kfree(cfg->ops); - wl_deinit_priv(cfg); - brcmf_free_wiphy(cfg->wiphy); - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -@@ -256,6 +256,7 @@ struct brcmf_cfg80211_wowl { - * struct brcmf_cfg80211_info - dongle private data of cfg80211 interface - * - * @wiphy: wiphy object for cfg80211 interface. -+ * @ops: pointer to copy of ops as registered with wiphy object. - * @conf: dongle configuration. - * @p2p: peer-to-peer specific information. - * @btcoex: Bluetooth coexistence information. -@@ -288,6 +289,7 @@ struct brcmf_cfg80211_wowl { - */ - struct brcmf_cfg80211_info { - struct wiphy *wiphy; -+ struct cfg80211_ops *ops; - struct brcmf_cfg80211_conf *conf; - struct brcmf_p2p_info p2p; - struct brcmf_btcoex_info *btcoex; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -@@ -136,6 +136,7 @@ void brcmf_feat_attach(struct brcmf_pub - { - struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); - struct brcmf_pno_macaddr_le pfn_mac; -+ u32 wowl_cap; - s32 err; - - brcmf_feat_firmware_capabilities(ifp); -@@ -143,6 +144,17 @@ void brcmf_feat_attach(struct brcmf_pub - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn"); - if (drvr->bus_if->wowl_supported) - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl"); -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) { -+ err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap); -+ if (!err) { -+ if (wowl_cap & BRCMF_WOWL_PFN_FOUND) -+ ifp->drvr->feat_flags |= -+ BIT(BRCMF_FEAT_WOWL_ND); -+ if (wowl_cap & BRCMF_WOWL_GTK_FAILURE) -+ ifp->drvr->feat_flags |= -+ BIT(BRCMF_FEAT_WOWL_GTK); -+ } -+ } - /* MBSS does not work for 43362 */ - if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID) - ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -@@ -27,6 +27,8 @@ - * RSDB: Real Simultaneous Dual Band - * TDLS: Tunneled Direct Link Setup - * SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan. -+ * WOWL_ND: WOWL net detect (PNO) -+ * WOWL_GTK: (WOWL) GTK rekeying offload - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ -@@ -36,7 +38,9 @@ - BRCMF_FEAT_DEF(P2P) \ - BRCMF_FEAT_DEF(RSDB) \ - BRCMF_FEAT_DEF(TDLS) \ -- BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) -+ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \ -+ BRCMF_FEAT_DEF(WOWL_ND) \ -+ BRCMF_FEAT_DEF(WOWL_GTK) - - /* - * Quirks: ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -@@ -111,7 +111,9 @@ - /* Wakeup if received matched secured pattern: */ - #define BRCMF_WOWL_SECURE (1 << 25) - /* Wakeup on finding preferred network */ --#define BRCMF_WOWL_PFN_FOUND (1 << 26) -+#define BRCMF_WOWL_PFN_FOUND (1 << 27) -+/* Wakeup on receiving pairwise key EAP packets: */ -+#define WIPHY_WOWL_EAP_PK (1 << 28) - /* Link Down indication in WoWL mode: */ - #define BRCMF_WOWL_LINKDOWN (1 << 31) - -@@ -136,6 +138,10 @@ - - #define BRCMF_MCSSET_LEN 16 - -+#define BRCMF_RSN_KCK_LENGTH 16 -+#define BRCMF_RSN_KEK_LENGTH 16 -+#define BRCMF_RSN_REPLAY_LEN 8 -+ - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { - BRCMF_JOIN_PREF_RSSI = 1, -@@ -789,4 +795,17 @@ struct brcmf_pktcnt_le { - __le32 rx_ocast_good_pkt; - }; - -+/** -+ * struct brcmf_gtk_keyinfo_le - GTP rekey data -+ * -+ * @kck: key confirmation key. -+ * @kek: key encryption key. -+ * @replay_counter: replay counter. -+ */ -+struct brcmf_gtk_keyinfo_le { -+ u8 kck[BRCMF_RSN_KCK_LENGTH]; -+ u8 kek[BRCMF_RSN_KEK_LENGTH]; -+ u8 replay_counter[BRCMF_RSN_REPLAY_LEN]; -+}; -+ - #endif /* FWIL_TYPES_H_ */ diff --git a/package/kernel/mac80211/patches/344-0015-brcmfmac-move-platform-data-retrieval-code-to-common.patch b/package/kernel/mac80211/patches/344-0015-brcmfmac-move-platform-data-retrieval-code-to-common.patch deleted file mode 100644 index 2685238925..0000000000 --- a/package/kernel/mac80211/patches/344-0015-brcmfmac-move-platform-data-retrieval-code-to-common.patch +++ /dev/null @@ -1,385 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:04 +0100 -Subject: [PATCH] brcmfmac: move platform data retrieval code to common - -In preparation of module parameters for all devices the module -platform data retrieval is moved from sdio to common. It is still -only used for sdio devices. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -@@ -27,8 +27,6 @@ - #include - #include - #include --#include --#include - #include - #include - #include -@@ -46,7 +44,6 @@ - #include "bus.h" - #include "debug.h" - #include "sdio.h" --#include "of.h" - #include "core.h" - #include "common.h" - -@@ -106,18 +103,18 @@ static void brcmf_sdiod_dummy_irqhandler - - int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) - { -+ struct brcmfmac_sdio_platform_data *pdata; - int ret = 0; - u8 data; - u32 addr, gpiocontrol; - unsigned long flags; - -- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { -+ pdata = sdiodev->pdata; -+ if ((pdata) && (pdata->oob_irq_supported)) { - brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n", -- sdiodev->pdata->oob_irq_nr); -- ret = request_irq(sdiodev->pdata->oob_irq_nr, -- brcmf_sdiod_oob_irqhandler, -- sdiodev->pdata->oob_irq_flags, -- "brcmf_oob_intr", -+ pdata->oob_irq_nr); -+ ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler, -+ pdata->oob_irq_flags, "brcmf_oob_intr", - &sdiodev->func[1]->dev); - if (ret != 0) { - brcmf_err("request_irq failed %d\n", ret); -@@ -129,7 +126,7 @@ int brcmf_sdiod_intr_register(struct brc - sdiodev->irq_en = true; - spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); - -- ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr); -+ ret = enable_irq_wake(pdata->oob_irq_nr); - if (ret != 0) { - brcmf_err("enable_irq_wake failed %d\n", ret); - return ret; -@@ -158,7 +155,7 @@ int brcmf_sdiod_intr_register(struct brc - - /* redirect, configure and enable io for interrupt signal */ - data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; -- if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) -+ if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH) - data |= SDIO_SEPINT_ACT_HI; - brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); - -@@ -176,9 +173,12 @@ int brcmf_sdiod_intr_register(struct brc - - int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev) - { -+ struct brcmfmac_sdio_platform_data *pdata; -+ - brcmf_dbg(SDIO, "Entering\n"); - -- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { -+ pdata = sdiodev->pdata; -+ if ((pdata) && (pdata->oob_irq_supported)) { - sdio_claim_host(sdiodev->func[1]); - brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); - brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); -@@ -187,11 +187,10 @@ int brcmf_sdiod_intr_unregister(struct b - if (sdiodev->oob_irq_requested) { - sdiodev->oob_irq_requested = false; - if (sdiodev->irq_wake) { -- disable_irq_wake(sdiodev->pdata->oob_irq_nr); -+ disable_irq_wake(pdata->oob_irq_nr); - sdiodev->irq_wake = false; - } -- free_irq(sdiodev->pdata->oob_irq_nr, -- &sdiodev->func[1]->dev); -+ free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev); - sdiodev->irq_en = false; - } - } else { -@@ -1103,8 +1102,6 @@ static const struct sdio_device_id brcmf - }; - MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); - --static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; -- - - static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev, - int val) -@@ -1167,10 +1164,7 @@ static int brcmf_ops_sdio_probe(struct s - dev_set_drvdata(&func->dev, bus_if); - dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); - sdiodev->dev = &sdiodev->func[1]->dev; -- sdiodev->pdata = brcmfmac_sdio_pdata; -- -- if (!sdiodev->pdata) -- brcmf_of_probe(sdiodev); -+ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev); - - #ifdef CONFIG_PM_SLEEP - /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ -@@ -1296,7 +1290,7 @@ static const struct dev_pm_ops brcmf_sdi - static struct sdio_driver brcmf_sdmmc_driver = { - .probe = brcmf_ops_sdio_probe, - .remove = brcmf_ops_sdio_remove, -- .name = BRCMFMAC_SDIO_PDATA_NAME, -+ .name = KBUILD_MODNAME, - .id_table = brcmf_sdmmc_ids, - .drv = { - .owner = THIS_MODULE, -@@ -1306,37 +1300,6 @@ static struct sdio_driver brcmf_sdmmc_dr - }, - }; - --static int __init brcmf_sdio_pd_probe(struct platform_device *pdev) --{ -- brcmf_dbg(SDIO, "Enter\n"); -- -- brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev); -- -- if (brcmfmac_sdio_pdata->power_on) -- brcmfmac_sdio_pdata->power_on(); -- -- return 0; --} -- --static int brcmf_sdio_pd_remove(struct platform_device *pdev) --{ -- brcmf_dbg(SDIO, "Enter\n"); -- -- if (brcmfmac_sdio_pdata->power_off) -- brcmfmac_sdio_pdata->power_off(); -- -- sdio_unregister_driver(&brcmf_sdmmc_driver); -- -- return 0; --} -- --static struct platform_driver brcmf_sdio_pd = { -- .remove = brcmf_sdio_pd_remove, -- .driver = { -- .name = BRCMFMAC_SDIO_PDATA_NAME, -- } --}; -- - void brcmf_sdio_register(void) - { - int ret; -@@ -1350,19 +1313,6 @@ void brcmf_sdio_exit(void) - { - brcmf_dbg(SDIO, "Enter\n"); - -- if (brcmfmac_sdio_pdata) -- platform_driver_unregister(&brcmf_sdio_pd); -- else -- sdio_unregister_driver(&brcmf_sdmmc_driver); -+ sdio_unregister_driver(&brcmf_sdmmc_driver); - } - --void __init brcmf_sdio_init(void) --{ -- int ret; -- -- brcmf_dbg(SDIO, "Enter\n"); -- -- ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); -- if (ret == -ENODEV) -- brcmf_dbg(SDIO, "No platform data available.\n"); --} ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -27,6 +27,7 @@ - #include "fwil_types.h" - #include "tracepoint.h" - #include "common.h" -+#include "of.h" - - MODULE_AUTHOR("Broadcom Corporation"); - MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); -@@ -79,6 +80,7 @@ module_param_named(ignore_probe_fail, br - MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging"); - #endif - -+static struct brcmfmac_sdio_platform_data *brcmfmac_pdata; - struct brcmf_mp_global_t brcmf_mp_global; - - int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) -@@ -231,6 +233,13 @@ static void brcmf_mp_attach(void) - BRCMF_FW_ALTPATH_LEN); - } - -+struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev) -+{ -+ if (!brcmfmac_pdata) -+ brcmf_of_probe(dev, &brcmfmac_pdata); -+ return brcmfmac_pdata; -+} -+ - int brcmf_mp_device_attach(struct brcmf_pub *drvr) - { - drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC); -@@ -253,6 +262,35 @@ void brcmf_mp_device_detach(struct brcmf - kfree(drvr->settings); - } - -+static int __init brcmf_common_pd_probe(struct platform_device *pdev) -+{ -+ brcmf_dbg(INFO, "Enter\n"); -+ -+ brcmfmac_pdata = dev_get_platdata(&pdev->dev); -+ -+ if (brcmfmac_pdata->power_on) -+ brcmfmac_pdata->power_on(); -+ -+ return 0; -+} -+ -+static int brcmf_common_pd_remove(struct platform_device *pdev) -+{ -+ brcmf_dbg(INFO, "Enter\n"); -+ -+ if (brcmfmac_pdata->power_off) -+ brcmfmac_pdata->power_off(); -+ -+ return 0; -+} -+ -+static struct platform_driver brcmf_pd = { -+ .remove = brcmf_common_pd_remove, -+ .driver = { -+ .name = BRCMFMAC_SDIO_PDATA_NAME, -+ } -+}; -+ - static int __init brcmfmac_module_init(void) - { - int err; -@@ -260,16 +298,21 @@ static int __init brcmfmac_module_init(v - /* Initialize debug system first */ - brcmf_debugfs_init(); - --#ifdef CPTCFG_BRCMFMAC_SDIO -- brcmf_sdio_init(); --#endif -+ /* Get the platform data (if available) for our devices */ -+ err = platform_driver_probe(&brcmf_pd, brcmf_common_pd_probe); -+ if (err == -ENODEV) -+ brcmf_dbg(INFO, "No platform data available.\n"); -+ - /* Initialize global module paramaters */ - brcmf_mp_attach(); - - /* Continue the initialization by registering the different busses */ - err = brcmf_core_init(); -- if (err) -+ if (err) { - brcmf_debugfs_exit(); -+ if (brcmfmac_pdata) -+ platform_driver_unregister(&brcmf_pd); -+ } - - return err; - } -@@ -277,6 +320,8 @@ static int __init brcmfmac_module_init(v - static void __exit brcmfmac_module_exit(void) - { - brcmf_core_exit(); -+ if (brcmfmac_pdata) -+ platform_driver_unregister(&brcmf_pd); - brcmf_debugfs_exit(); - } - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -@@ -15,6 +15,8 @@ - #ifndef BRCMFMAC_COMMON_H - #define BRCMFMAC_COMMON_H - -+#include -+#include - #include "fwil_types.h" - - extern const u8 ALLFFMAC[ETH_ALEN]; -@@ -89,6 +91,7 @@ struct brcmf_mp_device { - struct cc_translate *country_codes; - }; - -+struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev); - int brcmf_mp_device_attach(struct brcmf_pub *drvr); - void brcmf_mp_device_detach(struct brcmf_pub *drvr); - #ifdef DEBUG ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -@@ -16,17 +16,16 @@ - #include - #include - #include --#include --#include --#include - - #include - #include "debug.h" --#include "sdio.h" -+#include "core.h" -+#include "common.h" -+#include "of.h" - --void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev) -+void -+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio) - { -- struct device *dev = sdiodev->dev; - struct device_node *np = dev->of_node; - int irq; - u32 irqf; -@@ -35,12 +34,12 @@ void brcmf_of_probe(struct brcmf_sdio_de - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) - return; - -- sdiodev->pdata = devm_kzalloc(dev, sizeof(*sdiodev->pdata), GFP_KERNEL); -- if (!sdiodev->pdata) -+ *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL); -+ if (!(*sdio)) - return; - - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) -- sdiodev->pdata->drive_strength = val; -+ (*sdio)->drive_strength = val; - - /* make sure there are interrupts defined in the node */ - if (!of_find_property(np, "interrupts", NULL)) -@@ -53,7 +52,7 @@ void brcmf_of_probe(struct brcmf_sdio_de - } - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); - -- sdiodev->pdata->oob_irq_supported = true; -- sdiodev->pdata->oob_irq_nr = irq; -- sdiodev->pdata->oob_irq_flags = irqf; -+ (*sdio)->oob_irq_supported = true; -+ (*sdio)->oob_irq_nr = irq; -+ (*sdio)->oob_irq_flags = irqf; - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -@@ -14,9 +14,11 @@ - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - #ifdef CONFIG_OF --void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev); -+void -+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio); - #else --static void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev) -+static void brcmf_of_probe(struct device *dev, -+ struct brcmfmac_sdio_platform_data **sdio) - { - } - #endif /* CONFIG_OF */ diff --git a/package/kernel/mac80211/patches/344-0016-brcmfmac-keep-ARP-and-ND-offload-enabled-during-WOWL.patch b/package/kernel/mac80211/patches/344-0016-brcmfmac-keep-ARP-and-ND-offload-enabled-during-WOWL.patch deleted file mode 100644 index 4e789cfc5a..0000000000 --- a/package/kernel/mac80211/patches/344-0016-brcmfmac-keep-ARP-and-ND-offload-enabled-during-WOWL.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:05 +0100 -Subject: [PATCH] brcmfmac: keep ARP and ND offload enabled during WOWL - -Currently ARP and ND (IPv6 Neigbor Discovery) offload get disabled -on entering suspend. However when firmwares support the wowl_cap -iovar then these offload routines can be kept enabled as they -will work during WOWL as well. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -3556,7 +3556,8 @@ static s32 brcmf_cfg80211_resume(struct - brcmf_report_wowl_wakeind(wiphy, ifp); - brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0); - brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0); -- brcmf_configure_arp_nd_offload(ifp, true); -+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND)) -+ brcmf_configure_arp_nd_offload(ifp, true); - brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, - cfg->wowl.pre_pmmode); - cfg->wowl.active = false; -@@ -3580,7 +3581,8 @@ static void brcmf_configure_wowl(struct - - brcmf_dbg(TRACE, "Suspend, wowl config.\n"); - -- brcmf_configure_arp_nd_offload(ifp, false); -+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND)) -+ brcmf_configure_arp_nd_offload(ifp, false); - brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode); - brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -@@ -147,6 +147,7 @@ void brcmf_feat_attach(struct brcmf_pub - if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) { - err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap); - if (!err) { -+ ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_WOWL_ARP_ND); - if (wowl_cap & BRCMF_WOWL_PFN_FOUND) - ifp->drvr->feat_flags |= - BIT(BRCMF_FEAT_WOWL_ND); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -@@ -29,6 +29,7 @@ - * SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan. - * WOWL_ND: WOWL net detect (PNO) - * WOWL_GTK: (WOWL) GTK rekeying offload -+ * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL. - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ -@@ -40,7 +41,8 @@ - BRCMF_FEAT_DEF(TDLS) \ - BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \ - BRCMF_FEAT_DEF(WOWL_ND) \ -- BRCMF_FEAT_DEF(WOWL_GTK) -+ BRCMF_FEAT_DEF(WOWL_GTK) \ -+ BRCMF_FEAT_DEF(WOWL_ARP_ND) - - /* - * Quirks: diff --git a/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch b/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch deleted file mode 100644 index 37b68552cc..0000000000 --- a/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch +++ /dev/null @@ -1,734 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:07 +0100 -Subject: [PATCH] brcmfmac: switch to new platform data - -Platform data is only available for sdio. With this patch a new -platform data structure is being used which allows for platform -data for any device and configurable per device. This patch only -switches to the new structure and adds support for SDIO devices. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -@@ -103,7 +103,7 @@ static void brcmf_sdiod_dummy_irqhandler - - int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) - { -- struct brcmfmac_sdio_platform_data *pdata; -+ struct brcmfmac_sdio_pd *pdata; - int ret = 0; - u8 data; - u32 addr, gpiocontrol; -@@ -173,7 +173,7 @@ int brcmf_sdiod_intr_register(struct brc - - int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev) - { -- struct brcmfmac_sdio_platform_data *pdata; -+ struct brcmfmac_sdio_pd *pdata; - - brcmf_dbg(SDIO, "Entering\n"); - -@@ -1164,17 +1164,6 @@ static int brcmf_ops_sdio_probe(struct s - dev_set_drvdata(&func->dev, bus_if); - dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); - sdiodev->dev = &sdiodev->func[1]->dev; -- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev); -- --#ifdef CONFIG_PM_SLEEP -- /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ -- * is true or when platform data OOB irq is true). -- */ -- if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && -- ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || -- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) -- bus_if->wowl_supported = true; --#endif - - brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -6459,8 +6459,8 @@ int brcmf_cfg80211_wait_vif_event(struct - static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], - struct brcmf_fil_country_le *ccreq) - { -- struct cc_translate *country_codes; -- struct cc_entry *cc; -+ struct brcmfmac_pd_cc *country_codes; -+ struct brcmfmac_pd_cc_entry *cc; - s32 found_index; - int i; - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -80,7 +80,7 @@ module_param_named(ignore_probe_fail, br - MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging"); - #endif - --static struct brcmfmac_sdio_platform_data *brcmfmac_pdata; -+static struct brcmfmac_platform_data *brcmfmac_pdata; - struct brcmf_mp_global_t brcmf_mp_global; - - int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) -@@ -229,15 +229,46 @@ void __brcmf_dbg(u32 level, const char * - - static void brcmf_mp_attach(void) - { -+ /* If module param firmware path is set then this will always be used, -+ * if not set then if available use the platform data version. To make -+ * sure it gets initialized at all, always copy the module param version -+ */ - strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path, - BRCMF_FW_ALTPATH_LEN); -+ if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) && -+ (brcmf_mp_global.firmware_path[0] == '\0')) { -+ strlcpy(brcmf_mp_global.firmware_path, -+ brcmfmac_pdata->fw_alternative_path, -+ BRCMF_FW_ALTPATH_LEN); -+ } - } - --struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev) --{ -- if (!brcmfmac_pdata) -- brcmf_of_probe(dev, &brcmfmac_pdata); -- return brcmfmac_pdata; -+struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, -+ enum brcmf_bus_type bus_type, -+ u32 chip, u32 chiprev) -+{ -+ struct brcmfmac_sdio_pd *pdata; -+ struct brcmfmac_pd_device *device_pd; -+ int i; -+ -+ if (brcmfmac_pdata) { -+ for (i = 0; i < brcmfmac_pdata->device_count; i++) { -+ device_pd = &brcmfmac_pdata->devices[i]; -+ if ((device_pd->bus_type == bus_type) && -+ (device_pd->id == chip) && -+ ((device_pd->rev == chiprev) || -+ (device_pd->rev == -1))) { -+ brcmf_dbg(INFO, "Platform data for device found\n"); -+ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO) -+ return &device_pd->bus.sdio; -+ break; -+ } -+ } -+ } -+ pdata = NULL; -+ brcmf_of_probe(dev, &pdata); -+ -+ return pdata; - } - - int brcmf_mp_device_attach(struct brcmf_pub *drvr) -@@ -287,7 +318,7 @@ static int brcmf_common_pd_remove(struct - static struct platform_driver brcmf_pd = { - .remove = brcmf_common_pd_remove, - .driver = { -- .name = BRCMFMAC_SDIO_PDATA_NAME, -+ .name = BRCMFMAC_PDATA_NAME, - } - }; - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -@@ -16,7 +16,7 @@ - #define BRCMFMAC_COMMON_H - - #include --#include -+#include - #include "fwil_types.h" - - extern const u8 ALLFFMAC[ETH_ALEN]; -@@ -43,33 +43,6 @@ struct brcmf_mp_global_t { - extern struct brcmf_mp_global_t brcmf_mp_global; - - /** -- * struct cc_entry - Struct for translating user space country code (iso3166) to -- * firmware country code and revision. -- * -- * @iso3166: iso3166 alpha 2 country code string. -- * @cc: firmware country code string. -- * @rev: firmware country code revision. -- */ --struct cc_entry { -- char iso3166[BRCMF_COUNTRY_BUF_SZ]; -- char cc[BRCMF_COUNTRY_BUF_SZ]; -- s32 rev; --}; -- --/** -- * struct cc_translate - Struct for translating country codes as set by user -- * space to a country code and rev which can be used by -- * firmware. -- * -- * @table_size: number of entries in table (> 0) -- * @table: dynamic array of 1 or more elements with translation information. -- */ --struct cc_translate { -- int table_size; -- struct cc_entry table[0]; --}; -- --/** - * struct brcmf_mp_device - Device module paramaters. - * - * @sdiod_txglomsz: SDIO txglom size. -@@ -88,10 +61,12 @@ struct brcmf_mp_device { - int fcmode; - bool roamoff; - bool ignore_probe_fail; -- struct cc_translate *country_codes; -+ struct brcmfmac_pd_cc *country_codes; - }; - --struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev); -+struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, -+ enum brcmf_bus_type bus_type, -+ u32 chip, u32 chiprev); - int brcmf_mp_device_attach(struct brcmf_pub *drvr); - void brcmf_mp_device_detach(struct brcmf_pub *drvr); - #ifdef DEBUG ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -@@ -23,8 +23,7 @@ - #include "common.h" - #include "of.h" - --void --brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio) -+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) - { - struct device_node *np = dev->of_node; - int irq; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -@@ -15,10 +15,9 @@ - */ - #ifdef CONFIG_OF - void --brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio); -+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio); - #else --static void brcmf_of_probe(struct device *dev, -- struct brcmfmac_sdio_platform_data **sdio) -+static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) - { - } - #endif /* CONFIG_OF */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -33,8 +33,6 @@ - #include - #include - #include --#include --#include - #include - #include - #include -@@ -44,6 +42,8 @@ - #include "sdio.h" - #include "chip.h" - #include "firmware.h" -+#include "core.h" -+#include "common.h" - - #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) - #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) -@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops br - static bool - brcmf_sdio_probe_attach(struct brcmf_sdio *bus) - { -+ struct brcmf_sdio_dev *sdiodev; - u8 clkctl = 0; - int err = 0; - int reg_addr; - u32 reg_val; - u32 drivestrength; - -- sdio_claim_host(bus->sdiodev->func[1]); -+ sdiodev = bus->sdiodev; -+ sdio_claim_host(sdiodev->func[1]); - - pr_debug("F1 signature read @0x18000000=0x%4x\n", -- brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); -+ brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL)); - - /* - * Force PLL off until brcmf_chip_attach() - * programs PLL control regs - */ - -- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, -+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - BRCMF_INIT_CLKCTL1, &err); - if (!err) -- clkctl = brcmf_sdiod_regrb(bus->sdiodev, -+ clkctl = brcmf_sdiod_regrb(sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, &err); - - if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { -@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - goto fail; - } - -- bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops); -+ bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops); - if (IS_ERR(bus->ci)) { - brcmf_err("brcmf_chip_attach failed!\n"); - bus->ci = NULL; - goto fail; - } -+ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev, -+ BRCMF_BUSTYPE_SDIO, -+ bus->ci->chip, -+ bus->ci->chiprev); -+ /* platform specific configuration: -+ * alignments must be at least 4 bytes for ADMA -+ */ -+ bus->head_align = ALIGNMENT; -+ bus->sgentry_align = ALIGNMENT; -+ if (sdiodev->pdata) { -+ if (sdiodev->pdata->sd_head_align > ALIGNMENT) -+ bus->head_align = sdiodev->pdata->sd_head_align; -+ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) -+ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; -+ } -+ /* allocate scatter-gather table. sg support -+ * will be disabled upon allocation failure. -+ */ -+ brcmf_sdiod_sgtable_alloc(sdiodev); -+ -+#ifdef CONFIG_PM_SLEEP -+ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ -+ * is true or when platform data OOB irq is true). -+ */ -+ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && -+ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || -+ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) -+ sdiodev->bus_if->wowl_supported = true; -+#endif - - if (brcmf_sdio_kso_init(bus)) { - brcmf_err("error enabling KSO\n"); - goto fail; - } - -- if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength)) -- drivestrength = bus->sdiodev->pdata->drive_strength; -+ if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength)) -+ drivestrength = sdiodev->pdata->drive_strength; - else - drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; -- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); -+ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); - - /* Set card control so an SDIO card reset does a WLAN backplane reset */ -- reg_val = brcmf_sdiod_regrb(bus->sdiodev, -- SDIO_CCCR_BRCM_CARDCTRL, &err); -+ reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); - if (err) - goto fail; - - reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; - -- brcmf_sdiod_regwb(bus->sdiodev, -- SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); -+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); - if (err) - goto fail; - - /* set PMUControl so a backplane reset does PMU state reload */ - reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); -- reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); -+ reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err); - if (err) - goto fail; - - reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); - -- brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err); -+ brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err); - if (err) - goto fail; - -- sdio_release_host(bus->sdiodev->func[1]); -+ sdio_release_host(sdiodev->func[1]); - - brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); - -@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - return true; - - fail: -- sdio_release_host(bus->sdiodev->func[1]); -+ sdio_release_host(sdiodev->func[1]); - return false; - } - -@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - bus->txminmax = BRCMF_TXMINMAX; - bus->tx_seq = SDPCM_SEQ_WRAP - 1; - -- /* platform specific configuration: -- * alignments must be at least 4 bytes for ADMA -- */ -- bus->head_align = ALIGNMENT; -- bus->sgentry_align = ALIGNMENT; -- if (sdiodev->pdata) { -- if (sdiodev->pdata->sd_head_align > ALIGNMENT) -- bus->head_align = sdiodev->pdata->sd_head_align; -- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) -- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; -- } -- - /* single-threaded workqueue */ - wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM, - dev_name(&sdiodev->func[1]->dev)); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -@@ -184,7 +184,7 @@ struct brcmf_sdio_dev { - struct brcmf_sdio *bus; - struct device *dev; - struct brcmf_bus *bus_if; -- struct brcmfmac_sdio_platform_data *pdata; -+ struct brcmfmac_sdio_pd *pdata; - bool oob_irq_requested; - bool irq_en; /* irq enable flags */ - spinlock_t irq_en_lock; ---- a/include/linux/platform_data/brcmfmac-sdio.h -+++ /dev/null -@@ -1,135 +0,0 @@ --/* -- * Copyright (c) 2013 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#ifndef _LINUX_BRCMFMAC_PLATFORM_H --#define _LINUX_BRCMFMAC_PLATFORM_H -- --/* -- * Platform specific driver functions and data. Through the platform specific -- * device data functions can be provided to help the brcmfmac driver to -- * operate with the device in combination with the used platform. -- * -- * Use the platform data in the following (similar) way: -- * -- * --#include -- -- --static void brcmfmac_power_on(void) --{ --} -- --static void brcmfmac_power_off(void) --{ --} -- --static void brcmfmac_reset(void) --{ --} -- --static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { -- .power_on = brcmfmac_power_on, -- .power_off = brcmfmac_power_off, -- .reset = brcmfmac_reset --}; -- --static struct platform_device brcmfmac_device = { -- .name = BRCMFMAC_SDIO_PDATA_NAME, -- .id = PLATFORM_DEVID_NONE, -- .dev.platform_data = &brcmfmac_sdio_pdata --}; -- --void __init brcmfmac_init_pdata(void) --{ -- brcmfmac_sdio_pdata.oob_irq_supported = true; -- brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); -- brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | -- IORESOURCE_IRQ_HIGHLEVEL; -- platform_device_register(&brcmfmac_device); --} -- * -- * -- * Note: the brcmfmac can be loaded as module or be statically built-in into -- * the kernel. If built-in then do note that it uses module_init (and -- * module_exit) routines which equal device_initcall. So if you intend to -- * create a module with the platform specific data for the brcmfmac and have -- * it built-in to the kernel then use a higher initcall then device_initcall -- * (see init.h). If this is not done then brcmfmac will load without problems -- * but will not pickup the platform data. -- * -- * When the driver does not "detect" platform driver data then it will continue -- * without reporting anything and just assume there is no data needed. Which is -- * probably true for most platforms. -- * -- * Explanation of the platform_data fields: -- * -- * drive_strength: is the preferred drive_strength to be used for the SDIO -- * pins. If 0 then a default value will be used. This is the target drive -- * strength, the exact drive strength which will be used depends on the -- * capabilities of the device. -- * -- * oob_irq_supported: does the board have support for OOB interrupts. SDIO -- * in-band interrupts are relatively slow and for having less overhead on -- * interrupt processing an out of band interrupt can be used. If the HW -- * supports this then enable this by setting this field to true and configure -- * the oob related fields. -- * -- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are -- * used for registering the irq using request_irq function. -- * -- * broken_sg_support: flag for broken sg list support of SDIO host controller. -- * Set this to true if the SDIO host controller has higher align requirement -- * than 32 bytes for each scatterlist item. -- * -- * sd_head_align: alignment requirement for start of data buffer -- * -- * sd_sgentry_align: length alignment requirement for each sg entry -- * -- * power_on: This function is called by the brcmfmac when the module gets -- * loaded. This can be particularly useful for low power devices. The platform -- * spcific routine may for example decide to power up the complete device. -- * If there is no use-case for this function then provide NULL. -- * -- * power_off: This function is called by the brcmfmac when the module gets -- * unloaded. At this point the device can be powered down or otherwise be reset. -- * So if an actual power_off is not supported but reset is then reset the device -- * when this function gets called. This can be particularly useful for low power -- * devices. If there is no use-case for this function (either power-down or -- * reset) then provide NULL. -- * -- * reset: This function can get called if the device communication broke down. -- * This functionality is particularly useful in case of SDIO type devices. It is -- * possible to reset a dongle via sdio data interface, but it requires that -- * this is fully functional. This function is chip/module specific and this -- * function should return only after the complete reset has completed. -- */ -- --#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" -- --struct brcmfmac_sdio_platform_data { -- unsigned int drive_strength; -- bool oob_irq_supported; -- unsigned int oob_irq_nr; -- unsigned long oob_irq_flags; -- bool broken_sg_support; -- unsigned short sd_head_align; -- unsigned short sd_sgentry_align; -- void (*power_on)(void); -- void (*power_off)(void); -- void (*reset)(void); --}; -- --#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ ---- /dev/null -+++ b/include/linux/platform_data/brcmfmac.h -@@ -0,0 +1,185 @@ -+/* -+ * Copyright (c) 201 Broadcom Corporation -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _LINUX_BRCMFMAC_PLATFORM_H -+#define _LINUX_BRCMFMAC_PLATFORM_H -+ -+ -+#define BRCMFMAC_PDATA_NAME "brcmfmac" -+ -+#define BRCMFMAC_COUNTRY_BUF_SZ 4 -+ -+ -+/* -+ * Platform specific driver functions and data. Through the platform specific -+ * device data functions and data can be provided to help the brcmfmac driver to -+ * operate with the device in combination with the used platform. -+ */ -+ -+ -+/** -+ * Note: the brcmfmac can be loaded as module or be statically built-in into -+ * the kernel. If built-in then do note that it uses module_init (and -+ * module_exit) routines which equal device_initcall. So if you intend to -+ * create a module with the platform specific data for the brcmfmac and have -+ * it built-in to the kernel then use a higher initcall then device_initcall -+ * (see init.h). If this is not done then brcmfmac will load without problems -+ * but will not pickup the platform data. -+ * -+ * When the driver does not "detect" platform driver data then it will continue -+ * without reporting anything and just assume there is no data needed. Which is -+ * probably true for most platforms. -+ */ -+ -+/** -+ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are -+ * supported. -+ */ -+enum brcmf_bus_type { -+ BRCMF_BUSTYPE_SDIO, -+ BRCMF_BUSTYPE_USB, -+ BRCMF_BUSTYPE_PCIE -+}; -+ -+ -+/** -+ * struct brcmfmac_sdio_pd - SDIO Device specific platform data. -+ * -+ * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be -+ * used. -+ * @drive_strength: is the preferred drive_strength to be used for the SDIO -+ * pins. If 0 then a default value will be used. This is -+ * the target drive strength, the exact drive strength -+ * which will be used depends on the capabilities of the -+ * device. -+ * @oob_irq_supported: does the board have support for OOB interrupts. SDIO -+ * in-band interrupts are relatively slow and for having -+ * less overhead on interrupt processing an out of band -+ * interrupt can be used. If the HW supports this then -+ * enable this by setting this field to true and configure -+ * the oob related fields. -+ * @oob_irq_nr, -+ * @oob_irq_flags: the OOB interrupt information. The values are used for -+ * registering the irq using request_irq function. -+ * @broken_sg_support: flag for broken sg list support of SDIO host controller. -+ * Set this to true if the SDIO host controller has higher -+ * align requirement than 32 bytes for each scatterlist -+ * item. -+ * @sd_head_align: alignment requirement for start of data buffer. -+ * @sd_sgentry_align: length alignment requirement for each sg entry. -+ * @reset: This function can get called if the device communication -+ * broke down. This functionality is particularly useful in -+ * case of SDIO type devices. It is possible to reset a -+ * dongle via sdio data interface, but it requires that -+ * this is fully functional. This function is chip/module -+ * specific and this function should return only after the -+ * complete reset has completed. -+ */ -+struct brcmfmac_sdio_pd { -+ int txglomsz; -+ unsigned int drive_strength; -+ bool oob_irq_supported; -+ unsigned int oob_irq_nr; -+ unsigned long oob_irq_flags; -+ bool broken_sg_support; -+ unsigned short sd_head_align; -+ unsigned short sd_sgentry_align; -+ void (*reset)(void); -+}; -+ -+/** -+ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code -+ * (iso3166) to firmware country code and -+ * revision. -+ * -+ * @iso3166: iso3166 alpha 2 country code string. -+ * @cc: firmware country code string. -+ * @rev: firmware country code revision. -+ */ -+struct brcmfmac_pd_cc_entry { -+ char iso3166[BRCMFMAC_COUNTRY_BUF_SZ]; -+ char cc[BRCMFMAC_COUNTRY_BUF_SZ]; -+ s32 rev; -+}; -+ -+/** -+ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user -+ * space to a country code and rev which can be used by -+ * firmware. -+ * -+ * @table_size: number of entries in table (> 0) -+ * @table: array of 1 or more elements with translation information. -+ */ -+struct brcmfmac_pd_cc { -+ int table_size; -+ struct brcmfmac_pd_cc_entry table[0]; -+}; -+ -+/** -+ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type) -+ * is the unique identifier of the device. -+ * -+ * @id: ID of the device for which this data is. In case of SDIO -+ * or PCIE this is the chipid as identified by chip.c In -+ * case of USB this is the chipid as identified by the -+ * device query. -+ * @rev: chip revision, see id. -+ * @bus_type: The type of bus. Some chipid/rev exist for different bus -+ * types. Each bus type has its own set of settings. -+ * @feature_disable: Bitmask of features to disable (override), See feature.c -+ * in brcmfmac for details. -+ * @country_codes: If available, pointer to struct for translating country -+ * codes. -+ * @bus: Bus specific (union) device settings. Currently only -+ * SDIO. -+ */ -+struct brcmfmac_pd_device { -+ unsigned int id; -+ unsigned int rev; -+ enum brcmf_bus_type bus_type; -+ unsigned int feature_disable; -+ struct brcmfmac_pd_cc *country_codes; -+ union { -+ struct brcmfmac_sdio_pd sdio; -+ } bus; -+}; -+ -+/** -+ * struct brcmfmac_platform_data - BRCMFMAC specific platform data. -+ * -+ * @power_on: This function is called by the brcmfmac driver when the module -+ * gets loaded. This can be particularly useful for low power -+ * devices. The platform spcific routine may for example decide to -+ * power up the complete device. If there is no use-case for this -+ * function then provide NULL. -+ * @power_off: This function is called by the brcmfmac when the module gets -+ * unloaded. At this point the devices can be powered down or -+ * otherwise be reset. So if an actual power_off is not supported -+ * but reset is supported by the devices then reset the devices -+ * when this function gets called. This can be particularly useful -+ * for low power devices. If there is no use-case for this -+ * function then provide NULL. -+ */ -+struct brcmfmac_platform_data { -+ void (*power_on)(void); -+ void (*power_off)(void); -+ char *fw_alternative_path; -+ int device_count; -+ struct brcmfmac_pd_device devices[0]; -+}; -+ -+ -+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch b/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch deleted file mode 100644 index 34341d7f18..0000000000 --- a/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch +++ /dev/null @@ -1,607 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:08 +0100 -Subject: [PATCH] brcmfmac: merge platform data and module paramaters - -Merge module parameters and platform data in one struct. This is the -last step to move to the new platform data per device. Now parameters -of platform data will be merged with module parameters per device. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -@@ -109,8 +109,8 @@ int brcmf_sdiod_intr_register(struct brc - u32 addr, gpiocontrol; - unsigned long flags; - -- pdata = sdiodev->pdata; -- if ((pdata) && (pdata->oob_irq_supported)) { -+ pdata = &sdiodev->settings->bus.sdio; -+ if (pdata->oob_irq_supported) { - brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n", - pdata->oob_irq_nr); - ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler, -@@ -177,8 +177,8 @@ int brcmf_sdiod_intr_unregister(struct b - - brcmf_dbg(SDIO, "Entering\n"); - -- pdata = sdiodev->pdata; -- if ((pdata) && (pdata->oob_irq_supported)) { -+ pdata = &sdiodev->settings->bus.sdio; -+ if (pdata->oob_irq_supported) { - sdio_claim_host(sdiodev->func[1]); - brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); - brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); -@@ -522,7 +522,7 @@ static int brcmf_sdiod_sglist_rw(struct - target_list = pktlist; - /* for host with broken sg support, prepare a page aligned list */ - __skb_queue_head_init(&local_list); -- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) { -+ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) { - req_sz = 0; - skb_queue_walk(pktlist, pkt_next) - req_sz += pkt_next->len; -@@ -629,7 +629,7 @@ static int brcmf_sdiod_sglist_rw(struct - } - } - -- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) { -+ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) { - local_pkt_next = local_list.next; - orig_offset = 0; - skb_queue_walk(pktlist, pkt_next) { -@@ -900,7 +900,7 @@ void brcmf_sdiod_sgtable_alloc(struct br - return; - - nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE, -- sdiodev->bus_if->drvr->settings->sdiod_txglomsz); -+ sdiodev->settings->bus.sdio.txglomsz); - nents += (nents >> 4) + 1; - - WARN_ON(nents > sdiodev->max_segment_count); -@@ -912,7 +912,7 @@ void brcmf_sdiod_sgtable_alloc(struct br - sdiodev->sg_support = false; - } - -- sdiodev->txglomsz = sdiodev->bus_if->drvr->settings->sdiod_txglomsz; -+ sdiodev->txglomsz = sdiodev->settings->bus.sdio.txglomsz; - } - - #ifdef CONFIG_PM_SLEEP -@@ -1246,8 +1246,8 @@ static int brcmf_ops_sdio_suspend(struct - - sdio_flags = MMC_PM_KEEP_POWER; - if (sdiodev->wowl_enabled) { -- if (sdiodev->pdata->oob_irq_supported) -- enable_irq_wake(sdiodev->pdata->oob_irq_nr); -+ if (sdiodev->settings->bus.sdio.oob_irq_supported) -+ enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr); - else - sdio_flags |= MMC_PM_WAKE_SDIO_IRQ; - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -@@ -43,6 +43,8 @@ enum brcmf_bus_protocol_type { - BRCMF_PROTO_MSGBUF - }; - -+struct brcmf_mp_device; -+ - struct brcmf_bus_dcmd { - char *name; - char *param; -@@ -217,7 +219,7 @@ bool brcmf_c_prec_enq(struct device *dev - void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp); - - /* Indication from bus module regarding presence/insertion of dongle. */ --int brcmf_attach(struct device *dev); -+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings); - /* Indication from bus module regarding removal/absence of dongle */ - void brcmf_detach(struct device *dev); - /* Indication from bus module that dongle should be reset */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -243,14 +243,35 @@ static void brcmf_mp_attach(void) - } - } - --struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, -- enum brcmf_bus_type bus_type, -- u32 chip, u32 chiprev) -+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, -+ enum brcmf_bus_type bus_type, -+ u32 chip, u32 chiprev) - { -- struct brcmfmac_sdio_pd *pdata; -+ struct brcmf_mp_device *settings; - struct brcmfmac_pd_device *device_pd; -+ bool found; - int i; - -+ brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip, -+ chiprev); -+ settings = kzalloc(sizeof(*settings), GFP_ATOMIC); -+ if (!settings) -+ return NULL; -+ -+ /* start by using the module paramaters */ -+ settings->p2p_enable = !!brcmf_p2p_enable; -+ settings->feature_disable = brcmf_feature_disable; -+ settings->fcmode = brcmf_fcmode; -+ settings->roamoff = !!brcmf_roamoff; -+#ifdef DEBUG -+ settings->ignore_probe_fail = !!brcmf_ignore_probe_fail; -+#endif -+ -+ if (bus_type == BRCMF_BUSTYPE_SDIO) -+ settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz; -+ -+ /* See if there is any device specific platform data configured */ -+ found = false; - if (brcmfmac_pdata) { - for (i = 0; i < brcmfmac_pdata->device_count; i++) { - device_pd = &brcmfmac_pdata->devices[i]; -@@ -259,38 +280,29 @@ struct brcmfmac_sdio_pd *brcmf_get_modul - ((device_pd->rev == chiprev) || - (device_pd->rev == -1))) { - brcmf_dbg(INFO, "Platform data for device found\n"); -+ settings->country_codes = -+ device_pd->country_codes; - if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO) -- return &device_pd->bus.sdio; -+ memcpy(&settings->bus.sdio, -+ &device_pd->bus.sdio, -+ sizeof(settings->bus.sdio)); -+ found = true; - break; - } - } - } -- pdata = NULL; -- brcmf_of_probe(dev, &pdata); -- -- return pdata; --} -- --int brcmf_mp_device_attach(struct brcmf_pub *drvr) --{ -- drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC); -- if (!drvr->settings) -- return -ENOMEM; -- -- drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz; -- drvr->settings->p2p_enable = !!brcmf_p2p_enable; -- drvr->settings->feature_disable = brcmf_feature_disable; -- drvr->settings->fcmode = brcmf_fcmode; -- drvr->settings->roamoff = !!brcmf_roamoff; --#ifdef DEBUG -- drvr->settings->ignore_probe_fail = !!brcmf_ignore_probe_fail; --#endif -- return 0; -+ if ((bus_type == BRCMF_BUSTYPE_SDIO) && (!found)) { -+ /* No platform data for this device. In case of SDIO try OF -+ * (Open Firwmare) Device Tree. -+ */ -+ brcmf_of_probe(dev, &settings->bus.sdio); -+ } -+ return settings; - } - --void brcmf_mp_device_detach(struct brcmf_pub *drvr) -+void brcmf_release_module_param(struct brcmf_mp_device *module_param) - { -- kfree(drvr->settings); -+ kfree(module_param); - } - - static int __init brcmf_common_pd_probe(struct platform_device *pdev) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h -@@ -45,41 +45,30 @@ extern struct brcmf_mp_global_t brcmf_mp - /** - * struct brcmf_mp_device - Device module paramaters. - * -- * @sdiod_txglomsz: SDIO txglom size. -- * @joinboost_5g_rssi: 5g rssi booost for preferred join selection. - * @p2p_enable: Legacy P2P0 enable (old wpa_supplicant). - * @feature_disable: Feature_disable bitmask. - * @fcmode: FWS flow control. - * @roamoff: Firmware roaming off? -+ * @ignore_probe_fail: Ignore probe failure. - * @country_codes: If available, pointer to struct for translating country codes -+ * @bus: Bus specific platform data. Only SDIO at the mmoment. - */ - struct brcmf_mp_device { -- int sdiod_txglomsz; -- int joinboost_5g_rssi; -- bool p2p_enable; -- int feature_disable; -- int fcmode; -- bool roamoff; -- bool ignore_probe_fail; -+ bool p2p_enable; -+ unsigned int feature_disable; -+ int fcmode; -+ bool roamoff; -+ bool ignore_probe_fail; - struct brcmfmac_pd_cc *country_codes; -+ union { -+ struct brcmfmac_sdio_pd sdio; -+ } bus; - }; - --struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, -- enum brcmf_bus_type bus_type, -- u32 chip, u32 chiprev); --int brcmf_mp_device_attach(struct brcmf_pub *drvr); --void brcmf_mp_device_detach(struct brcmf_pub *drvr); --#ifdef DEBUG --static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr) --{ -- return drvr->settings->ignore_probe_fail; --} --#else --static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr) --{ -- return false; --} --#endif -+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, -+ enum brcmf_bus_type bus_type, -+ u32 chip, u32 chiprev); -+void brcmf_release_module_param(struct brcmf_mp_device *module_param); - - /* Sets dongle media info (drv_version, mac address). */ - int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -1104,7 +1104,7 @@ static int brcmf_inet6addr_changed(struc - } - #endif - --int brcmf_attach(struct device *dev) -+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings) - { - struct brcmf_pub *drvr = NULL; - int ret = 0; -@@ -1126,10 +1126,7 @@ int brcmf_attach(struct device *dev) - drvr->hdrlen = 0; - drvr->bus_if = dev_get_drvdata(dev); - drvr->bus_if->drvr = drvr; -- -- /* Initialize device specific settings */ -- if (brcmf_mp_device_attach(drvr)) -- goto fail; -+ drvr->settings = settings; - - /* attach debug facilities */ - brcmf_debug_attach(drvr); -@@ -1274,7 +1271,7 @@ fail: - brcmf_net_detach(p2p_ifp->ndev); - drvr->iflist[0] = NULL; - drvr->iflist[1] = NULL; -- if (brcmf_ignoring_probe_fail(drvr)) -+ if (drvr->settings->ignore_probe_fail) - ret = 0; - - return ret; -@@ -1350,8 +1347,6 @@ void brcmf_detach(struct device *dev) - - brcmf_proto_detach(drvr); - -- brcmf_mp_device_detach(drvr); -- - brcmf_debug_detach(drvr); - bus_if->drvr = NULL; - kfree(drvr); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c -@@ -23,7 +23,7 @@ - #include "common.h" - #include "of.h" - --void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) -+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio) - { - struct device_node *np = dev->of_node; - int irq; -@@ -33,12 +33,8 @@ void brcmf_of_probe(struct device *dev, - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac")) - return; - -- *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL); -- if (!(*sdio)) -- return; -- - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) -- (*sdio)->drive_strength = val; -+ sdio->drive_strength = val; - - /* make sure there are interrupts defined in the node */ - if (!of_find_property(np, "interrupts", NULL)) -@@ -51,7 +47,7 @@ void brcmf_of_probe(struct device *dev, - } - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); - -- (*sdio)->oob_irq_supported = true; -- (*sdio)->oob_irq_nr = irq; -- (*sdio)->oob_irq_flags = irqf; -+ sdio->oob_irq_supported = true; -+ sdio->oob_irq_nr = irq; -+ sdio->oob_irq_flags = irqf; - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h -@@ -14,10 +14,9 @@ - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - #ifdef CONFIG_OF --void --brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio); -+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio); - #else --static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) -+static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio) - { - } - #endif /* CONFIG_OF */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -37,6 +37,8 @@ - #include "pcie.h" - #include "firmware.h" - #include "chip.h" -+#include "core.h" -+#include "common.h" - - - enum brcmf_pcie_state { -@@ -266,6 +268,7 @@ struct brcmf_pciedev_info { - u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset); - void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset, - u16 value); -+ struct brcmf_mp_device *settings; - }; - - struct brcmf_pcie_ringbuf { -@@ -1525,16 +1528,16 @@ static void brcmf_pcie_release_resource( - } - - --static int brcmf_pcie_attach_bus(struct device *dev) -+static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo) - { - int ret; - - /* Attach to the common driver interface */ -- ret = brcmf_attach(dev); -+ ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings); - if (ret) { - brcmf_err("brcmf_attach failed\n"); - } else { -- ret = brcmf_bus_start(dev); -+ ret = brcmf_bus_start(&devinfo->pdev->dev); - if (ret) - brcmf_err("dongle is not responding\n"); - } -@@ -1672,7 +1675,7 @@ static void brcmf_pcie_setup(struct devi - init_waitqueue_head(&devinfo->mbdata_resp_wait); - - brcmf_pcie_intr_enable(devinfo); -- if (brcmf_pcie_attach_bus(bus->dev) == 0) -+ if (brcmf_pcie_attach_bus(devinfo) == 0) - return; - - brcmf_pcie_bus_console_read(devinfo); -@@ -1716,6 +1719,15 @@ brcmf_pcie_probe(struct pci_dev *pdev, c - goto fail; - } - -+ devinfo->settings = brcmf_get_module_param(&devinfo->pdev->dev, -+ BRCMF_BUSTYPE_PCIE, -+ devinfo->ci->chip, -+ devinfo->ci->chiprev); -+ if (!devinfo->settings) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ - bus = kzalloc(sizeof(*bus), GFP_KERNEL); - if (!bus) { - ret = -ENOMEM; -@@ -1760,6 +1772,8 @@ fail: - brcmf_pcie_release_resource(devinfo); - if (devinfo->ci) - brcmf_chip_detach(devinfo->ci); -+ if (devinfo->settings) -+ brcmf_release_module_param(devinfo->settings); - kfree(pcie_bus_dev); - kfree(devinfo); - return ret; -@@ -1799,6 +1813,8 @@ brcmf_pcie_remove(struct pci_dev *pdev) - - if (devinfo->ci) - brcmf_chip_detach(devinfo->ci); -+ if (devinfo->settings) -+ brcmf_release_module_param(devinfo->settings); - - kfree(devinfo); - dev_set_drvdata(&pdev->dev, NULL); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -2442,15 +2442,17 @@ static void brcmf_sdio_bus_stop(struct d - - static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) - { -+ struct brcmf_sdio_dev *sdiodev; - unsigned long flags; - -- if (bus->sdiodev->oob_irq_requested) { -- spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags); -- if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) { -- enable_irq(bus->sdiodev->pdata->oob_irq_nr); -- bus->sdiodev->irq_en = true; -+ sdiodev = bus->sdiodev; -+ if (sdiodev->oob_irq_requested) { -+ spin_lock_irqsave(&sdiodev->irq_en_lock, flags); -+ if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) { -+ enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr); -+ sdiodev->irq_en = true; - } -- spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags); -+ spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); - } - } - -@@ -3394,9 +3396,7 @@ static int brcmf_sdio_bus_preinit(struct - sizeof(u32)); - } else { - /* otherwise, set txglomalign */ -- value = 4; -- if (sdiodev->pdata) -- value = sdiodev->pdata->sd_sgentry_align; -+ value = sdiodev->settings->bus.sdio.sd_sgentry_align; - /* SDIO ADMA requires at least 32 bit alignment */ - value = max_t(u32, value, 4); - err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, -@@ -3811,21 +3811,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - bus->ci = NULL; - goto fail; - } -- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev, -+ sdiodev->settings = brcmf_get_module_param(sdiodev->dev, - BRCMF_BUSTYPE_SDIO, - bus->ci->chip, - bus->ci->chiprev); -+ if (!sdiodev->settings) { -+ brcmf_err("Failed to get device parameters\n"); -+ goto fail; -+ } - /* platform specific configuration: - * alignments must be at least 4 bytes for ADMA - */ - bus->head_align = ALIGNMENT; - bus->sgentry_align = ALIGNMENT; -- if (sdiodev->pdata) { -- if (sdiodev->pdata->sd_head_align > ALIGNMENT) -- bus->head_align = sdiodev->pdata->sd_head_align; -- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) -- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; -- } -+ if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT) -+ bus->head_align = sdiodev->settings->bus.sdio.sd_head_align; -+ if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT) -+ bus->sgentry_align = -+ sdiodev->settings->bus.sdio.sd_sgentry_align; -+ - /* allocate scatter-gather table. sg support - * will be disabled upon allocation failure. - */ -@@ -3837,7 +3841,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - */ - if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && - ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || -- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) -+ (sdiodev->settings->bus.sdio.oob_irq_supported))) - sdiodev->bus_if->wowl_supported = true; - #endif - -@@ -3846,8 +3850,8 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - goto fail; - } - -- if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength)) -- drivestrength = sdiodev->pdata->drive_strength; -+ if (sdiodev->settings->bus.sdio.drive_strength) -+ drivestrength = sdiodev->settings->bus.sdio.drive_strength; - else - drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; - brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); -@@ -4124,7 +4128,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; - - /* Attach to the common layer, reserve hdr space */ -- ret = brcmf_attach(bus->sdiodev->dev); -+ ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings); - if (ret != 0) { - brcmf_err("brcmf_attach failed\n"); - goto fail; -@@ -4228,6 +4232,8 @@ void brcmf_sdio_remove(struct brcmf_sdio - } - brcmf_chip_detach(bus->ci); - } -+ if (bus->sdiodev->settings) -+ brcmf_release_module_param(bus->sdiodev->settings); - - kfree(bus->rxbuf); - kfree(bus->hdrbuf); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h -@@ -184,7 +184,7 @@ struct brcmf_sdio_dev { - struct brcmf_sdio *bus; - struct device *dev; - struct brcmf_bus *bus_if; -- struct brcmfmac_sdio_pd *pdata; -+ struct brcmf_mp_device *settings; - bool oob_irq_requested; - bool irq_en; /* irq enable flags */ - spinlock_t irq_en_lock; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -@@ -27,6 +27,8 @@ - #include "debug.h" - #include "firmware.h" - #include "usb.h" -+#include "core.h" -+#include "common.h" - - - #define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000) -@@ -171,6 +173,7 @@ struct brcmf_usbdev_info { - struct urb *bulk_urb; /* used for FW download */ - - bool wowl_enabled; -+ struct brcmf_mp_device *settings; - }; - - static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, -@@ -1027,6 +1030,9 @@ static void brcmf_usb_detach(struct brcm - - kfree(devinfo->tx_reqs); - kfree(devinfo->rx_reqs); -+ -+ if (devinfo->settings) -+ brcmf_release_module_param(devinfo->settings); - } - - -@@ -1136,7 +1142,7 @@ static int brcmf_usb_bus_setup(struct br - int ret; - - /* Attach to the common driver interface */ -- ret = brcmf_attach(devinfo->dev); -+ ret = brcmf_attach(devinfo->dev, devinfo->settings); - if (ret) { - brcmf_err("brcmf_attach failed\n"); - return ret; -@@ -1223,6 +1229,14 @@ static int brcmf_usb_probe_cb(struct brc - bus->wowl_supported = true; - #endif - -+ devinfo->settings = brcmf_get_module_param(bus->dev, BRCMF_BUSTYPE_USB, -+ bus_pub->devid, -+ bus_pub->chiprev); -+ if (!devinfo->settings) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ - if (!brcmf_usb_dlneeded(devinfo)) { - ret = brcmf_usb_bus_setup(devinfo); - if (ret) diff --git a/package/kernel/mac80211/patches/344-0019-brcmfmac-integrate-add_keyext-in-add_key.patch b/package/kernel/mac80211/patches/344-0019-brcmfmac-integrate-add_keyext-in-add_key.patch deleted file mode 100644 index eb680fccfc..0000000000 --- a/package/kernel/mac80211/patches/344-0019-brcmfmac-integrate-add_keyext-in-add_key.patch +++ /dev/null @@ -1,227 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:09 +0100 -Subject: [PATCH] brcmfmac: integrate add_keyext in add_key - -brcmf_add_keyext is called when a key is configured for a specific -mac address. This function is very similar to the calling function -brcmf_add_key. Integrate this function and also use existing del_key -function in case key is to be cleared. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -2073,84 +2073,34 @@ done: - } - - static s32 --brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, -- u8 key_idx, const u8 *mac_addr, struct key_params *params) -+brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, -+ u8 key_idx, bool pairwise, const u8 *mac_addr) - { - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_wsec_key key; - s32 err = 0; -- u8 keybuf[8]; -+ -+ brcmf_dbg(TRACE, "Enter\n"); -+ if (!check_vif_up(ifp->vif)) -+ return -EIO; -+ -+ if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) { -+ /* we ignore this key index in this case */ -+ return -EINVAL; -+ } - - memset(&key, 0, sizeof(key)); -- key.index = (u32) key_idx; -- /* Instead of bcast for ea address for default wep keys, -- driver needs it to be Null */ -- if (!is_multicast_ether_addr(mac_addr)) -- memcpy((char *)&key.ea, (void *)mac_addr, ETH_ALEN); -- key.len = (u32) params->key_len; -- /* check for key index change */ -- if (key.len == 0) { -- /* key delete */ -- err = send_key_to_dongle(ifp, &key); -- if (err) -- brcmf_err("key delete error (%d)\n", err); -- } else { -- if (key.len > sizeof(key.data)) { -- brcmf_err("Invalid key length (%d)\n", key.len); -- return -EINVAL; -- } - -- brcmf_dbg(CONN, "Setting the key index %d\n", key.index); -- memcpy(key.data, params->key, key.len); -+ key.index = (u32)key_idx; -+ key.flags = BRCMF_PRIMARY_KEY; -+ key.algo = CRYPTO_ALGO_OFF; - -- if (!brcmf_is_apmode(ifp->vif) && -- (params->cipher == WLAN_CIPHER_SUITE_TKIP)) { -- brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); -- memcpy(keybuf, &key.data[24], sizeof(keybuf)); -- memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); -- memcpy(&key.data[16], keybuf, sizeof(keybuf)); -- } -+ brcmf_dbg(CONN, "key index (%d)\n", key_idx); - -- /* if IW_ENCODE_EXT_RX_SEQ_VALID set */ -- if (params->seq && params->seq_len == 6) { -- /* rx iv */ -- u8 *ivptr; -- ivptr = (u8 *) params->seq; -- key.rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) | -- (ivptr[3] << 8) | ivptr[2]; -- key.rxiv.lo = (ivptr[1] << 8) | ivptr[0]; -- key.iv_initialized = true; -- } -+ /* Set the new key/index */ -+ err = send_key_to_dongle(ifp, &key); - -- switch (params->cipher) { -- case WLAN_CIPHER_SUITE_WEP40: -- key.algo = CRYPTO_ALGO_WEP1; -- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n"); -- break; -- case WLAN_CIPHER_SUITE_WEP104: -- key.algo = CRYPTO_ALGO_WEP128; -- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); -- break; -- case WLAN_CIPHER_SUITE_TKIP: -- key.algo = CRYPTO_ALGO_TKIP; -- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n"); -- break; -- case WLAN_CIPHER_SUITE_AES_CMAC: -- key.algo = CRYPTO_ALGO_AES_CCM; -- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n"); -- break; -- case WLAN_CIPHER_SUITE_CCMP: -- key.algo = CRYPTO_ALGO_AES_CCM; -- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n"); -- break; -- default: -- brcmf_err("Invalid cipher (0x%x)\n", params->cipher); -- return -EINVAL; -- } -- err = send_key_to_dongle(ifp, &key); -- if (err) -- brcmf_err("wsec_key error (%d)\n", err); -- } -+ brcmf_dbg(TRACE, "Exit\n"); - return err; - } - -@@ -2163,8 +2113,9 @@ brcmf_cfg80211_add_key(struct wiphy *wip - struct brcmf_wsec_key *key; - s32 val; - s32 wsec; -- s32 err = 0; -+ s32 err; - u8 keybuf[8]; -+ bool ext_key; - - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(CONN, "key index (%d)\n", key_idx); -@@ -2177,27 +2128,32 @@ brcmf_cfg80211_add_key(struct wiphy *wip - return -EINVAL; - } - -- if (mac_addr && -- (params->cipher != WLAN_CIPHER_SUITE_WEP40) && -- (params->cipher != WLAN_CIPHER_SUITE_WEP104)) { -- brcmf_dbg(TRACE, "Exit"); -- return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params); -- } -- -- key = &ifp->vif->profile.key[key_idx]; -- memset(key, 0, sizeof(*key)); -+ if (params->key_len == 0) -+ return brcmf_cfg80211_del_key(wiphy, ndev, key_idx, pairwise, -+ mac_addr); - - if (params->key_len > sizeof(key->data)) { - brcmf_err("Too long key length (%u)\n", params->key_len); -- err = -EINVAL; -- goto done; -+ return -EINVAL; -+ } -+ -+ ext_key = false; -+ if (mac_addr && (params->cipher != WLAN_CIPHER_SUITE_WEP40) && -+ (params->cipher != WLAN_CIPHER_SUITE_WEP104)) { -+ brcmf_dbg(TRACE, "Ext key, mac %pM", mac_addr); -+ ext_key = true; - } -+ -+ key = &ifp->vif->profile.key[key_idx]; -+ memset(key, 0, sizeof(*key)); -+ if ((ext_key) && (!is_multicast_ether_addr(mac_addr))) -+ memcpy((char *)&key->ea, (void *)mac_addr, ETH_ALEN); - key->len = params->key_len; - key->index = key_idx; -- - memcpy(key->data, params->key, key->len); -+ if (!ext_key) -+ key->flags = BRCMF_PRIMARY_KEY; - -- key->flags = BRCMF_PRIMARY_KEY; - switch (params->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - key->algo = CRYPTO_ALGO_WEP1; -@@ -2237,7 +2193,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip - } - - err = send_key_to_dongle(ifp, key); -- if (err) -+ if (ext_key || err) - goto done; - - err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec); -@@ -2256,38 +2212,6 @@ done: - brcmf_dbg(TRACE, "Exit\n"); - return err; - } -- --static s32 --brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, -- u8 key_idx, bool pairwise, const u8 *mac_addr) --{ -- struct brcmf_if *ifp = netdev_priv(ndev); -- struct brcmf_wsec_key key; -- s32 err = 0; -- -- brcmf_dbg(TRACE, "Enter\n"); -- if (!check_vif_up(ifp->vif)) -- return -EIO; -- -- if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) { -- /* we ignore this key index in this case */ -- return -EINVAL; -- } -- -- memset(&key, 0, sizeof(key)); -- -- key.index = (u32) key_idx; -- key.flags = BRCMF_PRIMARY_KEY; -- key.algo = CRYPTO_ALGO_OFF; -- -- brcmf_dbg(CONN, "key index (%d)\n", key_idx); -- -- /* Set the new key/index */ -- err = send_key_to_dongle(ifp, &key); -- -- brcmf_dbg(TRACE, "Exit\n"); -- return err; --} - - static s32 - brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, diff --git a/package/kernel/mac80211/patches/344-0020-brcmfmac-add-802.11w-management-frame-protection-sup.patch b/package/kernel/mac80211/patches/344-0020-brcmfmac-add-802.11w-management-frame-protection-sup.patch deleted file mode 100644 index c20d40c049..0000000000 --- a/package/kernel/mac80211/patches/344-0020-brcmfmac-add-802.11w-management-frame-protection-sup.patch +++ /dev/null @@ -1,509 +0,0 @@ -From: Hante Meuleman -Date: Wed, 17 Feb 2016 11:27:10 +0100 -Subject: [PATCH] brcmfmac: add 802.11w management frame protection support - -Add full support for both AP and STA for management frame protection. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -72,8 +72,13 @@ - #define RSN_AKM_NONE 0 /* None (IBSS) */ - #define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */ - #define RSN_AKM_PSK 2 /* Pre-shared Key */ -+#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */ -+#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */ - #define RSN_CAP_LEN 2 /* Length of RSN capabilities */ --#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C -+#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3)) -+#define RSN_CAP_MFPR_MASK BIT(6) -+#define RSN_CAP_MFPC_MASK BIT(7) -+#define RSN_PMKID_COUNT_LEN 2 - - #define VNDR_IE_CMD_LEN 4 /* length of the set command - * string :"add", "del" (+ NUL) -@@ -211,12 +216,19 @@ static const struct ieee80211_regdomain - REG_RULE(5470-10, 5850+10, 80, 6, 20, 0), } - }; - --static const u32 __wl_cipher_suites[] = { -+/* Note: brcmf_cipher_suites is an array of int defining which cipher suites -+ * are supported. A pointer to this array and the number of entries is passed -+ * on to upper layers. AES_CMAC defines whether or not the driver supports MFP. -+ * So the cipher suite AES_CMAC has to be the last one in the array, and when -+ * device does not support MFP then the number of suites will be decreased by 1 -+ */ -+static const u32 brcmf_cipher_suites[] = { - WLAN_CIPHER_SUITE_WEP40, - WLAN_CIPHER_SUITE_WEP104, - WLAN_CIPHER_SUITE_TKIP, - WLAN_CIPHER_SUITE_CCMP, -- WLAN_CIPHER_SUITE_AES_CMAC, -+ /* Keep as last entry: */ -+ WLAN_CIPHER_SUITE_AES_CMAC - }; - - /* Vendor specific ie. id = 221, oui and type defines exact ie */ -@@ -1533,7 +1545,7 @@ static s32 brcmf_set_auth_type(struct ne - - static s32 - brcmf_set_wsec_mode(struct net_device *ndev, -- struct cfg80211_connect_params *sme, bool mfp) -+ struct cfg80211_connect_params *sme) - { - struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); - struct brcmf_cfg80211_security *sec; -@@ -1592,10 +1604,7 @@ brcmf_set_wsec_mode(struct net_device *n - sme->privacy) - pval = AES_ENABLED; - -- if (mfp) -- wsec = pval | gval | MFP_CAPABLE; -- else -- wsec = pval | gval; -+ wsec = pval | gval; - err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec); - if (err) { - brcmf_err("error (%d)\n", err); -@@ -1612,56 +1621,100 @@ brcmf_set_wsec_mode(struct net_device *n - static s32 - brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) - { -- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); -- struct brcmf_cfg80211_security *sec; -- s32 val = 0; -- s32 err = 0; -+ struct brcmf_if *ifp = netdev_priv(ndev); -+ s32 val; -+ s32 err; -+ const struct brcmf_tlv *rsn_ie; -+ const u8 *ie; -+ u32 ie_len; -+ u32 offset; -+ u16 rsn_cap; -+ u32 mfp; -+ u16 count; - -- if (sme->crypto.n_akm_suites) { -- err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), -- "wpa_auth", &val); -- if (err) { -- brcmf_err("could not get wpa_auth (%d)\n", err); -- return err; -+ if (!sme->crypto.n_akm_suites) -+ return 0; -+ -+ err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val); -+ if (err) { -+ brcmf_err("could not get wpa_auth (%d)\n", err); -+ return err; -+ } -+ if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) { -+ switch (sme->crypto.akm_suites[0]) { -+ case WLAN_AKM_SUITE_8021X: -+ val = WPA_AUTH_UNSPECIFIED; -+ break; -+ case WLAN_AKM_SUITE_PSK: -+ val = WPA_AUTH_PSK; -+ break; -+ default: -+ brcmf_err("invalid cipher group (%d)\n", -+ sme->crypto.cipher_group); -+ return -EINVAL; - } -- if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) { -- switch (sme->crypto.akm_suites[0]) { -- case WLAN_AKM_SUITE_8021X: -- val = WPA_AUTH_UNSPECIFIED; -- break; -- case WLAN_AKM_SUITE_PSK: -- val = WPA_AUTH_PSK; -- break; -- default: -- brcmf_err("invalid cipher group (%d)\n", -- sme->crypto.cipher_group); -- return -EINVAL; -- } -- } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) { -- switch (sme->crypto.akm_suites[0]) { -- case WLAN_AKM_SUITE_8021X: -- val = WPA2_AUTH_UNSPECIFIED; -- break; -- case WLAN_AKM_SUITE_PSK: -- val = WPA2_AUTH_PSK; -- break; -- default: -- brcmf_err("invalid cipher group (%d)\n", -- sme->crypto.cipher_group); -- return -EINVAL; -- } -+ } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) { -+ switch (sme->crypto.akm_suites[0]) { -+ case WLAN_AKM_SUITE_8021X: -+ val = WPA2_AUTH_UNSPECIFIED; -+ break; -+ case WLAN_AKM_SUITE_8021X_SHA256: -+ val = WPA2_AUTH_1X_SHA256; -+ break; -+ case WLAN_AKM_SUITE_PSK_SHA256: -+ val = WPA2_AUTH_PSK_SHA256; -+ break; -+ case WLAN_AKM_SUITE_PSK: -+ val = WPA2_AUTH_PSK; -+ break; -+ default: -+ brcmf_err("invalid cipher group (%d)\n", -+ sme->crypto.cipher_group); -+ return -EINVAL; - } -+ } - -- brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); -- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), -- "wpa_auth", val); -- if (err) { -- brcmf_err("could not set wpa_auth (%d)\n", err); -- return err; -- } -+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) -+ goto skip_mfp_config; -+ /* The MFP mode (1 or 2) needs to be determined, parse IEs. The -+ * IE will not be verified, just a quick search for MFP config -+ */ -+ rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len, -+ WLAN_EID_RSN); -+ if (!rsn_ie) -+ goto skip_mfp_config; -+ ie = (const u8 *)rsn_ie; -+ ie_len = rsn_ie->len + TLV_HDR_LEN; -+ /* Skip unicast suite */ -+ offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN; -+ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) -+ goto skip_mfp_config; -+ /* Skip multicast suite */ -+ count = ie[offset] + (ie[offset + 1] << 8); -+ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); -+ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) -+ goto skip_mfp_config; -+ /* Skip auth key management suite(s) */ -+ count = ie[offset] + (ie[offset + 1] << 8); -+ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); -+ if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len) -+ goto skip_mfp_config; -+ /* Ready to read capabilities */ -+ mfp = BRCMF_MFP_NONE; -+ rsn_cap = ie[offset] + (ie[offset + 1] << 8); -+ if (rsn_cap & RSN_CAP_MFPR_MASK) -+ mfp = BRCMF_MFP_REQUIRED; -+ else if (rsn_cap & RSN_CAP_MFPC_MASK) -+ mfp = BRCMF_MFP_CAPABLE; -+ brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp); -+ -+skip_mfp_config: -+ brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); -+ err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val); -+ if (err) { -+ brcmf_err("could not set wpa_auth (%d)\n", err); -+ return err; - } -- sec = &profile->sec; -- sec->wpa_auth = sme->crypto.akm_suites[0]; - - return err; - } -@@ -1827,7 +1880,7 @@ brcmf_cfg80211_connect(struct wiphy *wip - goto done; - } - -- err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED); -+ err = brcmf_set_wsec_mode(ndev, sme); - if (err) { - brcmf_err("wl_set_set_cipher failed (%d)\n", err); - goto done; -@@ -2077,10 +2130,12 @@ brcmf_cfg80211_del_key(struct wiphy *wip - u8 key_idx, bool pairwise, const u8 *mac_addr) - { - struct brcmf_if *ifp = netdev_priv(ndev); -- struct brcmf_wsec_key key; -- s32 err = 0; -+ struct brcmf_wsec_key *key; -+ s32 err; - - brcmf_dbg(TRACE, "Enter\n"); -+ brcmf_dbg(CONN, "key index (%d)\n", key_idx); -+ - if (!check_vif_up(ifp->vif)) - return -EIO; - -@@ -2089,16 +2144,19 @@ brcmf_cfg80211_del_key(struct wiphy *wip - return -EINVAL; - } - -- memset(&key, 0, sizeof(key)); -+ key = &ifp->vif->profile.key[key_idx]; - -- key.index = (u32)key_idx; -- key.flags = BRCMF_PRIMARY_KEY; -- key.algo = CRYPTO_ALGO_OFF; -+ if (key->algo == CRYPTO_ALGO_OFF) { -+ brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n"); -+ return -EINVAL; -+ } - -- brcmf_dbg(CONN, "key index (%d)\n", key_idx); -+ memset(key, 0, sizeof(*key)); -+ key->index = (u32)key_idx; -+ key->flags = BRCMF_PRIMARY_KEY; - -- /* Set the new key/index */ -- err = send_key_to_dongle(ifp, &key); -+ /* Clear the key/index */ -+ err = send_key_to_dongle(ifp, key); - - brcmf_dbg(TRACE, "Exit\n"); - return err; -@@ -2106,8 +2164,8 @@ brcmf_cfg80211_del_key(struct wiphy *wip - - static s32 - brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, -- u8 key_idx, bool pairwise, const u8 *mac_addr, -- struct key_params *params) -+ u8 key_idx, bool pairwise, const u8 *mac_addr, -+ struct key_params *params) - { - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_wsec_key *key; -@@ -2214,9 +2272,10 @@ done: - } - - static s32 --brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, -- u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie, -- void (*callback) (void *cookie, struct key_params * params)) -+brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx, -+ bool pairwise, const u8 *mac_addr, void *cookie, -+ void (*callback)(void *cookie, -+ struct key_params *params)) - { - struct key_params params; - struct brcmf_if *ifp = netdev_priv(ndev); -@@ -2268,8 +2327,15 @@ done: - - static s32 - brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy, -- struct net_device *ndev, u8 key_idx) -+ struct net_device *ndev, u8 key_idx) - { -+ struct brcmf_if *ifp = netdev_priv(ndev); -+ -+ brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx); -+ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) -+ return 0; -+ - brcmf_dbg(INFO, "Not supported\n"); - - return -EOPNOTSUPP; -@@ -3769,7 +3835,7 @@ brcmf_configure_wpaie(struct brcmf_if *i - u32 auth = 0; /* d11 open authentication */ - u16 count; - s32 err = 0; -- s32 len = 0; -+ s32 len; - u32 i; - u32 wsec; - u32 pval = 0; -@@ -3779,6 +3845,7 @@ brcmf_configure_wpaie(struct brcmf_if *i - u8 *data; - u16 rsn_cap; - u32 wme_bss_disable; -+ u32 mfp; - - brcmf_dbg(TRACE, "Enter\n"); - if (wpa_ie == NULL) -@@ -3893,19 +3960,53 @@ brcmf_configure_wpaie(struct brcmf_if *i - is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) : - (wpa_auth |= WPA_AUTH_PSK); - break; -+ case RSN_AKM_SHA256_PSK: -+ brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n"); -+ wpa_auth |= WPA2_AUTH_PSK_SHA256; -+ break; -+ case RSN_AKM_SHA256_1X: -+ brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n"); -+ wpa_auth |= WPA2_AUTH_1X_SHA256; -+ break; - default: - brcmf_err("Ivalid key mgmt info\n"); - } - offset++; - } - -+ mfp = BRCMF_MFP_NONE; - if (is_rsn_ie) { - wme_bss_disable = 1; - if ((offset + RSN_CAP_LEN) <= len) { - rsn_cap = data[offset] + (data[offset + 1] << 8); - if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK) - wme_bss_disable = 0; -+ if (rsn_cap & RSN_CAP_MFPR_MASK) { -+ brcmf_dbg(TRACE, "MFP Required\n"); -+ mfp = BRCMF_MFP_REQUIRED; -+ /* Firmware only supports mfp required in -+ * combination with WPA2_AUTH_PSK_SHA256 or -+ * WPA2_AUTH_1X_SHA256. -+ */ -+ if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 | -+ WPA2_AUTH_1X_SHA256))) { -+ err = -EINVAL; -+ goto exit; -+ } -+ /* Firmware has requirement that WPA2_AUTH_PSK/ -+ * WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI -+ * is to be included in the rsn ie. -+ */ -+ if (wpa_auth & WPA2_AUTH_PSK_SHA256) -+ wpa_auth |= WPA2_AUTH_PSK; -+ else if (wpa_auth & WPA2_AUTH_1X_SHA256) -+ wpa_auth |= WPA2_AUTH_UNSPECIFIED; -+ } else if (rsn_cap & RSN_CAP_MFPC_MASK) { -+ brcmf_dbg(TRACE, "MFP Capable\n"); -+ mfp = BRCMF_MFP_CAPABLE; -+ } - } -+ offset += RSN_CAP_LEN; - /* set wme_bss_disable to sync RSN Capabilities */ - err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable", - wme_bss_disable); -@@ -3913,6 +4014,21 @@ brcmf_configure_wpaie(struct brcmf_if *i - brcmf_err("wme_bss_disable error %d\n", err); - goto exit; - } -+ -+ /* Skip PMKID cnt as it is know to be 0 for AP. */ -+ offset += RSN_PMKID_COUNT_LEN; -+ -+ /* See if there is BIP wpa suite left for MFP */ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) && -+ ((offset + WPA_IE_MIN_OUI_LEN) <= len)) { -+ err = brcmf_fil_bsscfg_data_set(ifp, "bip", -+ &data[offset], -+ WPA_IE_MIN_OUI_LEN); -+ if (err < 0) { -+ brcmf_err("bip error %d\n", err); -+ goto exit; -+ } -+ } - } - /* FOR WPS , set SES_OW_ENABLED */ - wsec = (pval | gval | SES_OW_ENABLED); -@@ -3929,6 +4045,16 @@ brcmf_configure_wpaie(struct brcmf_if *i - brcmf_err("wsec error %d\n", err); - goto exit; - } -+ /* Configure MFP, this needs to go after wsec otherwise the wsec command -+ * will overwrite the values set by MFP -+ */ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) { -+ err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp); -+ if (err < 0) { -+ brcmf_err("mfp error %d\n", err); -+ goto exit; -+ } -+ } - /* set upper-layer auth */ - err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth); - if (err < 0) { -@@ -6149,8 +6275,10 @@ static int brcmf_setup_wiphy(struct wiph - wiphy->n_addresses = i; - - wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; -- wiphy->cipher_suites = __wl_cipher_suites; -- wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); -+ wiphy->cipher_suites = brcmf_cipher_suites; -+ wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites); -+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) -+ wiphy->n_cipher_suites--; - wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | - WIPHY_FLAG_OFFCHAN_TX | - WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h -@@ -72,7 +72,7 @@ - - #define BRCMF_VNDR_IE_P2PAF_SHIFT 12 - --#define BRCMF_MAX_DEFAULT_KEYS 4 -+#define BRCMF_MAX_DEFAULT_KEYS 6 - - /* beacon loss timeout defaults */ - #define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2 -@@ -107,7 +107,6 @@ struct brcmf_cfg80211_security { - u32 auth_type; - u32 cipher_pairwise; - u32 cipher_group; -- u32 wpa_auth; - }; - - /** ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c -@@ -161,6 +161,7 @@ void brcmf_feat_attach(struct brcmf_pub - ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS); - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode"); - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable"); -+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp"); - - pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER; - err = brcmf_fil_iovar_data_get(ifp, "pfn_macaddr", &pfn_mac, ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h -@@ -30,6 +30,7 @@ - * WOWL_ND: WOWL net detect (PNO) - * WOWL_GTK: (WOWL) GTK rekeying offload - * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL. -+ * MFP: 802.11w Management Frame Protection. - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ -@@ -42,7 +43,8 @@ - BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \ - BRCMF_FEAT_DEF(WOWL_ND) \ - BRCMF_FEAT_DEF(WOWL_GTK) \ -- BRCMF_FEAT_DEF(WOWL_ARP_ND) -+ BRCMF_FEAT_DEF(WOWL_ARP_ND) \ -+ BRCMF_FEAT_DEF(MFP) - - /* - * Quirks: ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h -@@ -142,6 +142,10 @@ - #define BRCMF_RSN_KEK_LENGTH 16 - #define BRCMF_RSN_REPLAY_LEN 8 - -+#define BRCMF_MFP_NONE 0 -+#define BRCMF_MFP_CAPABLE 1 -+#define BRCMF_MFP_REQUIRED 2 -+ - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { - BRCMF_JOIN_PREF_RSSI = 1, ---- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h -+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h -@@ -236,6 +236,8 @@ static inline bool ac_bitmap_tst(u8 bitm - #define WPA2_AUTH_RESERVED3 0x0200 - #define WPA2_AUTH_RESERVED4 0x0400 - #define WPA2_AUTH_RESERVED5 0x0800 -+#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */ -+#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */ - - #define DOT11_DEFAULT_RTS_LEN 2347 - #define DOT11_DEFAULT_FRAG_LEN 2346 diff --git a/package/kernel/mac80211/patches/345-brcmfmac-Remove-waitqueue_active-check.patch b/package/kernel/mac80211/patches/345-brcmfmac-Remove-waitqueue_active-check.patch deleted file mode 100644 index 39f438321e..0000000000 --- a/package/kernel/mac80211/patches/345-brcmfmac-Remove-waitqueue_active-check.patch +++ /dev/null @@ -1,54 +0,0 @@ -From: Hui Wang -Date: Wed, 9 Mar 2016 15:25:26 +0800 -Subject: [PATCH] brcmfmac: Remove waitqueue_active check - -We met a problem of pm_suspend when repeated closing/opening the lid -on a Lenovo laptop (1/20 reproduce rate), below is the log: - -[ 199.735876] PM: Entering mem sleep -[ 199.750516] e1000e: EEE TX LPI TIMER: 00000011 -[ 199.856638] Trying to free nonexistent resource <000000000000d000-000000000000d0ff> -[ 201.753566] brcmfmac: brcmf_pcie_suspend: Timeout on response for entering D3 substate -[ 201.753581] pci_legacy_suspend(): brcmf_pcie_suspend+0x0/0x1f0 [brcmfmac] returns -5 -[ 201.753585] dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -5 -[ 201.753589] PM: Device 0000:04:00.0 failed to suspend async: error -5 - -Through debugging, we found when problem happens, it is not the device -fails to enter D3, but the signal D3_ACK comes too early to pass the -waitqueue_active() check. - -Just like this: -brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D3_INFORM); -// signal is triggered here -wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed, - BRCMF_PCIE_MBDATA_TIMEOUT); - -So far I think it is safe to remove waitqueue_active check since there -is only one place to trigger this signal (sending -BRCMF_H2D_HOST_D3_INFORM). And it is not a problem calling wake_up -event earlier than calling wait_event. - -Cc: Brett Rudley -Cc: Hante Meuleman -Cc: Franky (Zhenhui) Lin -Cc: Pieter-Paul Giesberts -Cc: Arend van Spriel -Signed-off-by: Hui Wang -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c -@@ -677,10 +677,8 @@ static void brcmf_pcie_handle_mb_data(st - brcmf_dbg(PCIE, "D2H_MB_DATA: DEEP SLEEP EXIT\n"); - if (dtoh_mb_data & BRCMF_D2H_DEV_D3_ACK) { - brcmf_dbg(PCIE, "D2H_MB_DATA: D3 ACK\n"); -- if (waitqueue_active(&devinfo->mbdata_resp_wait)) { -- devinfo->mbdata_completed = true; -- wake_up(&devinfo->mbdata_resp_wait); -- } -+ devinfo->mbdata_completed = true; -+ wake_up(&devinfo->mbdata_resp_wait); - } - } - diff --git a/package/kernel/mac80211/patches/346-brcmfmac-uninitialized-ret-variable.patch b/package/kernel/mac80211/patches/346-brcmfmac-uninitialized-ret-variable.patch deleted file mode 100644 index 3c9ed425da..0000000000 --- a/package/kernel/mac80211/patches/346-brcmfmac-uninitialized-ret-variable.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Dan Carpenter -Date: Tue, 15 Mar 2016 10:06:10 +0300 -Subject: [PATCH] brcmfmac: uninitialized "ret" variable - -There is an error path where "ret" isn't initialized. - -Signed-off-by: Dan Carpenter -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c -@@ -250,7 +250,7 @@ static int brcmf_sdiod_request_data(stru - u32 addr, u8 regsz, void *data, bool write) - { - struct sdio_func *func; -- int ret; -+ int ret = -EINVAL; - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", - write, fn, addr, regsz); diff --git a/package/kernel/mac80211/patches/347-brcmfmac-sdio-remove-unused-variable-retry_limit.patch b/package/kernel/mac80211/patches/347-brcmfmac-sdio-remove-unused-variable-retry_limit.patch deleted file mode 100644 index d1deb6ee5c..0000000000 --- a/package/kernel/mac80211/patches/347-brcmfmac-sdio-remove-unused-variable-retry_limit.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Colin Ian King -Date: Sun, 20 Mar 2016 17:34:52 +0000 -Subject: [PATCH] brcmfmac: sdio: remove unused variable retry_limit - -retry_limit has never been used during the life of this driver, so -we may as well remove it as it is redundant. - -Signed-off-by: Colin Ian King -Reviewed-by: Julian Calaby -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -535,9 +535,6 @@ static int qcount[NUMPRIO]; - - #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL) - --/* Retry count for register access failures */ --static const uint retry_limit = 2; -- - /* Limit on rounding up frames */ - static const uint max_roundup = 512; - diff --git a/package/kernel/mac80211/patches/348-brcmfmac-Delete-unnecessary-variable-initialisation.patch b/package/kernel/mac80211/patches/348-brcmfmac-Delete-unnecessary-variable-initialisation.patch deleted file mode 100644 index d399b264ea..0000000000 --- a/package/kernel/mac80211/patches/348-brcmfmac-Delete-unnecessary-variable-initialisation.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Markus Elfring -Date: Fri, 18 Mar 2016 13:23:24 +1100 -Subject: [PATCH] brcmfmac: Delete unnecessary variable initialisation - -In brcmf_sdio_download_firmware(), bcmerror is set by the call to -brcmf_sdio_download_code_file(), before it's checked in the following -line. - -Signed-off-by: Markus Elfring -Acked-by: Arend van Spriel -[Rewrote commit message] -Signed-off-by: Julian Calaby -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -3258,7 +3258,7 @@ static int brcmf_sdio_download_firmware( - const struct firmware *fw, - void *nvram, u32 nvlen) - { -- int bcmerror = -EFAULT; -+ int bcmerror; - u32 rstvec; - - sdio_claim_host(bus->sdiodev->func[1]); diff --git a/package/kernel/mac80211/patches/349-0001-brcmfmac-clear-eventmask-array-before-using-it.patch b/package/kernel/mac80211/patches/349-0001-brcmfmac-clear-eventmask-array-before-using-it.patch deleted file mode 100644 index 0acb4faaf1..0000000000 --- a/package/kernel/mac80211/patches/349-0001-brcmfmac-clear-eventmask-array-before-using-it.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Hante Meuleman -Date: Mon, 11 Apr 2016 11:35:21 +0200 -Subject: [PATCH] brcmfmac: clear eventmask array before using it - -When the event_msgs iovar is set an array is used to configure the -enabled events. This arrays needs to nulled before configuring -otherwise unhandled events will be enabled. This solves a problem -where in case of wowl the host got woken by an incorrectly enabled -event. - -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Arend Van Spriel -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -@@ -371,6 +371,7 @@ int brcmf_fweh_activate_events(struct br - int i, err; - s8 eventmask[BRCMF_EVENTING_MASK_LEN]; - -+ memset(eventmask, 0, sizeof(eventmask)); - for (i = 0; i < BRCMF_E_LAST; i++) { - if (ifp->drvr->fweh.evt_handler[i]) { - brcmf_dbg(EVENT, "enable event %s\n", diff --git a/package/kernel/mac80211/patches/349-0002-brcmfmac-fix-clearing-wowl-wake-indicators.patch b/package/kernel/mac80211/patches/349-0002-brcmfmac-fix-clearing-wowl-wake-indicators.patch deleted file mode 100644 index 8d3067890c..0000000000 --- a/package/kernel/mac80211/patches/349-0002-brcmfmac-fix-clearing-wowl-wake-indicators.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Hante Meuleman -Date: Mon, 11 Apr 2016 11:35:22 +0200 -Subject: [PATCH] brcmfmac: fix clearing wowl wake indicators - -Newer firmwares require the usage of the wowl wakeind struct as size -for the iovar to clear the wake indicators. Older firmwares do not -care, so change the used size. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -3608,7 +3608,8 @@ static void brcmf_configure_wowl(struct - if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state)) - wowl_config |= BRCMF_WOWL_UNASSOC; - -- brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear", strlen("clear")); -+ brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear", -+ sizeof(struct brcmf_wowl_wakeind_le)); - brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config); - brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1); - brcmf_bus_wowl_config(cfg->pub->bus_if, true); diff --git a/package/kernel/mac80211/patches/349-0003-brcmfmac-insert-default-boardrev-in-nvram-data-if-mi.patch b/package/kernel/mac80211/patches/349-0003-brcmfmac-insert-default-boardrev-in-nvram-data-if-mi.patch deleted file mode 100644 index f293401ca8..0000000000 --- a/package/kernel/mac80211/patches/349-0003-brcmfmac-insert-default-boardrev-in-nvram-data-if-mi.patch +++ /dev/null @@ -1,114 +0,0 @@ -From: Hante Meuleman -Date: Mon, 11 Apr 2016 11:35:23 +0200 -Subject: [PATCH] brcmfmac: insert default boardrev in nvram data if - missing - -Some nvram files/stores come without the boardrev information, -but firmware requires this to be set. When not found in nvram then -add a default boardrev string to the nvram data. - -Reported-by: Rafal Milecki -Reviewed-by: Arend Van Spriel -Reviewed-by: Franky (Zhenhui) Lin -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c -@@ -29,6 +29,7 @@ - #define BRCMF_FW_MAX_NVRAM_SIZE 64000 - #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ - #define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ -+#define BRCMF_FW_DEFAULT_BOARDREV "boardrev=0xff" - - enum nvram_parser_state { - IDLE, -@@ -51,6 +52,7 @@ enum nvram_parser_state { - * @entry: start position of key,value entry. - * @multi_dev_v1: detect pcie multi device v1 (compressed). - * @multi_dev_v2: detect pcie multi device v2. -+ * @boardrev_found: nvram contains boardrev information. - */ - struct nvram_parser { - enum nvram_parser_state state; -@@ -63,6 +65,7 @@ struct nvram_parser { - u32 entry; - bool multi_dev_v1; - bool multi_dev_v2; -+ bool boardrev_found; - }; - - /** -@@ -125,6 +128,8 @@ static enum nvram_parser_state brcmf_nvr - nvp->multi_dev_v1 = true; - if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0) - nvp->multi_dev_v2 = true; -+ if (strncmp(&nvp->data[nvp->entry], "boardrev", 8) == 0) -+ nvp->boardrev_found = true; - } else if (!is_nvram_char(c) || c == ' ') { - brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", - nvp->line, nvp->column); -@@ -284,6 +289,8 @@ static void brcmf_fw_strip_multi_v1(stru - while (i < nvp->nvram_len) { - if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) { - i += 2; -+ if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0) -+ nvp->boardrev_found = true; - while (nvp->nvram[i] != 0) { - nvram[j] = nvp->nvram[i]; - i++; -@@ -335,6 +342,8 @@ static void brcmf_fw_strip_multi_v2(stru - while (i < nvp->nvram_len - len) { - if (strncmp(&nvp->nvram[i], prefix, len) == 0) { - i += len; -+ if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0) -+ nvp->boardrev_found = true; - while (nvp->nvram[i] != 0) { - nvram[j] = nvp->nvram[i]; - i++; -@@ -356,6 +365,18 @@ fail: - nvp->nvram_len = 0; - } - -+static void brcmf_fw_add_defaults(struct nvram_parser *nvp) -+{ -+ if (nvp->boardrev_found) -+ return; -+ -+ memcpy(&nvp->nvram[nvp->nvram_len], &BRCMF_FW_DEFAULT_BOARDREV, -+ strlen(BRCMF_FW_DEFAULT_BOARDREV)); -+ nvp->nvram_len += strlen(BRCMF_FW_DEFAULT_BOARDREV); -+ nvp->nvram[nvp->nvram_len] = '\0'; -+ nvp->nvram_len++; -+} -+ - /* brcmf_nvram_strip :Takes a buffer of "=\n" lines read from a fil - * and ending in a NUL. Removes carriage returns, empty lines, comment lines, - * and converts newlines to NULs. Shortens buffer as needed and pads with NULs. -@@ -377,16 +398,21 @@ static void *brcmf_fw_nvram_strip(const - if (nvp.state == END) - break; - } -- if (nvp.multi_dev_v1) -+ if (nvp.multi_dev_v1) { -+ nvp.boardrev_found = false; - brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr); -- else if (nvp.multi_dev_v2) -+ } else if (nvp.multi_dev_v2) { -+ nvp.boardrev_found = false; - brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr); -+ } - - if (nvp.nvram_len == 0) { - kfree(nvp.nvram); - return NULL; - } - -+ brcmf_fw_add_defaults(&nvp); -+ - pad = nvp.nvram_len; - *new_length = roundup(nvp.nvram_len + 1, 4); - while (pad != *new_length) { diff --git a/package/kernel/mac80211/patches/349-0004-brcmfmac-fix-p2p-scan-abort-null-pointer-exception.patch b/package/kernel/mac80211/patches/349-0004-brcmfmac-fix-p2p-scan-abort-null-pointer-exception.patch deleted file mode 100644 index ed0c83f9bb..0000000000 --- a/package/kernel/mac80211/patches/349-0004-brcmfmac-fix-p2p-scan-abort-null-pointer-exception.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Hante Meuleman -Date: Mon, 11 Apr 2016 11:35:24 +0200 -Subject: [PATCH] brcmfmac: fix p2p scan abort null pointer exception - -When p2p connection setup is performed without having ever done an -escan a null pointer exception can occur. This is because the ifp -to abort scanning is taken from escan struct while it was never -initialized. Fix this by using the primary ifp for scan abort. The -abort should still be performed and all scan related commands are -performed on primary ifp. - -Reviewed-by: Arend Van Spriel -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Hante Meuleman -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c -@@ -1266,7 +1266,7 @@ static void - brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg) - { - struct brcmf_p2p_info *p2p = &cfg->p2p; -- struct brcmf_if *ifp = cfg->escan_info.ifp; -+ struct brcmf_if *ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - - if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) && - (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) || diff --git a/package/kernel/mac80211/patches/349-0005-brcmfmac-screening-firmware-event-packet.patch b/package/kernel/mac80211/patches/349-0005-brcmfmac-screening-firmware-event-packet.patch deleted file mode 100644 index 4d26404f51..0000000000 --- a/package/kernel/mac80211/patches/349-0005-brcmfmac-screening-firmware-event-packet.patch +++ /dev/null @@ -1,297 +0,0 @@ -From: Franky Lin -Date: Mon, 11 Apr 2016 11:35:25 +0200 -Subject: [PATCH] brcmfmac: screening firmware event packet - -Firmware uses asynchronized events as a communication method to the -host. The event packets are marked as ETH_P_LINK_CTL protocol type. For -SDIO and PCIe bus, this kind of packets are delivered through virtual -event channel not data channel. This patch adds a screening logic to -make sure the event handler only processes the events coming from the -correct channel. - -Reviewed-by: Pieter-Paul Giesberts -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -@@ -216,7 +216,9 @@ bool brcmf_c_prec_enq(struct device *dev - int prec); - - /* Receive frame for delivery to OS. Callee disposes of rxp. */ --void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp); -+void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_evnt); -+/* Receive async event packet from firmware. Callee disposes of rxp. */ -+void brcmf_rx_event(struct device *dev, struct sk_buff *rxp); - - /* Indication from bus module regarding presence/insertion of dongle. */ - int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -311,16 +311,17 @@ void brcmf_txflowblock(struct device *de - brcmf_fws_bus_blocked(drvr, state); - } - --void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) -+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb, -+ bool handle_event) - { -- skb->dev = ifp->ndev; -- skb->protocol = eth_type_trans(skb, skb->dev); -+ skb->protocol = eth_type_trans(skb, ifp->ndev); - - if (skb->pkt_type == PACKET_MULTICAST) - ifp->stats.multicast++; - - /* Process special event packets */ -- brcmf_fweh_process_skb(ifp->drvr, skb); -+ if (handle_event) -+ brcmf_fweh_process_skb(ifp->drvr, skb); - - if (!(ifp->ndev->flags & IFF_UP)) { - brcmu_pkt_buf_free_skb(skb); -@@ -381,7 +382,7 @@ static void brcmf_rxreorder_process_info - /* validate flags and flow id */ - if (flags == 0xFF) { - brcmf_err("invalid flags...so ignore this packet\n"); -- brcmf_netif_rx(ifp, pkt); -+ brcmf_netif_rx(ifp, pkt, false); - return; - } - -@@ -393,7 +394,7 @@ static void brcmf_rxreorder_process_info - if (rfi == NULL) { - brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n", - flow_id); -- brcmf_netif_rx(ifp, pkt); -+ brcmf_netif_rx(ifp, pkt, false); - return; - } - -@@ -418,7 +419,7 @@ static void brcmf_rxreorder_process_info - rfi = kzalloc(buf_size, GFP_ATOMIC); - if (rfi == NULL) { - brcmf_err("failed to alloc buffer\n"); -- brcmf_netif_rx(ifp, pkt); -+ brcmf_netif_rx(ifp, pkt, false); - return; - } - -@@ -532,11 +533,11 @@ static void brcmf_rxreorder_process_info - netif_rx: - skb_queue_walk_safe(&reorder_list, pkt, pnext) { - __skb_unlink(pkt, &reorder_list); -- brcmf_netif_rx(ifp, pkt); -+ brcmf_netif_rx(ifp, pkt, false); - } - } - --void brcmf_rx_frame(struct device *dev, struct sk_buff *skb) -+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt) - { - struct brcmf_if *ifp; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); -@@ -560,7 +561,32 @@ void brcmf_rx_frame(struct device *dev, - if (rd->reorder) - brcmf_rxreorder_process_info(ifp, rd->reorder, skb); - else -- brcmf_netif_rx(ifp, skb); -+ brcmf_netif_rx(ifp, skb, handle_evnt); -+} -+ -+void brcmf_rx_event(struct device *dev, struct sk_buff *skb) -+{ -+ struct brcmf_if *ifp; -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pub *drvr = bus_if->drvr; -+ int ret; -+ -+ brcmf_dbg(EVENT, "Enter: %s: rxp=%p\n", dev_name(dev), skb); -+ -+ /* process and remove protocol-specific header */ -+ ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp); -+ -+ if (ret || !ifp || !ifp->ndev) { -+ if (ret != -ENODATA && ifp) -+ ifp->stats.rx_errors++; -+ brcmu_pkt_buf_free_skb(skb); -+ return; -+ } -+ -+ skb->protocol = eth_type_trans(skb, ifp->ndev); -+ -+ brcmf_fweh_process_skb(ifp->drvr, skb); -+ brcmu_pkt_buf_free_skb(skb); - } - - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -225,7 +225,8 @@ int brcmf_get_next_free_bsscfgidx(struct - void brcmf_txflowblock_if(struct brcmf_if *ifp, - enum brcmf_netif_stop_reason reason, bool state); - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); --void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); -+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb, -+ bool handle_event); - void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on); - int __init brcmf_core_init(void); - void __exit brcmf_core_exit(void); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -@@ -20,6 +20,7 @@ - - #include - #include -+#include - - #include - #include -@@ -1075,28 +1076,13 @@ static void brcmf_msgbuf_rxbuf_event_pos - } - - --static void --brcmf_msgbuf_rx_skb(struct brcmf_msgbuf *msgbuf, struct sk_buff *skb, -- u8 ifidx) --{ -- struct brcmf_if *ifp; -- -- ifp = brcmf_get_ifp(msgbuf->drvr, ifidx); -- if (!ifp || !ifp->ndev) { -- brcmf_err("Received pkt for invalid ifidx %d\n", ifidx); -- brcmu_pkt_buf_free_skb(skb); -- return; -- } -- brcmf_netif_rx(ifp, skb); --} -- -- - static void brcmf_msgbuf_process_event(struct brcmf_msgbuf *msgbuf, void *buf) - { - struct msgbuf_rx_event *event; - u32 idx; - u16 buflen; - struct sk_buff *skb; -+ struct brcmf_if *ifp; - - event = (struct msgbuf_rx_event *)buf; - idx = le32_to_cpu(event->msg.request_id); -@@ -1116,7 +1102,19 @@ static void brcmf_msgbuf_process_event(s - - skb_trim(skb, buflen); - -- brcmf_msgbuf_rx_skb(msgbuf, skb, event->msg.ifidx); -+ ifp = brcmf_get_ifp(msgbuf->drvr, event->msg.ifidx); -+ if (!ifp || !ifp->ndev) { -+ brcmf_err("Received pkt for invalid ifidx %d\n", -+ event->msg.ifidx); -+ goto exit; -+ } -+ -+ skb->protocol = eth_type_trans(skb, ifp->ndev); -+ -+ brcmf_fweh_process_skb(ifp->drvr, skb); -+ -+exit: -+ brcmu_pkt_buf_free_skb(skb); - } - - -@@ -1128,6 +1126,7 @@ brcmf_msgbuf_process_rx_complete(struct - u16 data_offset; - u16 buflen; - u32 idx; -+ struct brcmf_if *ifp; - - brcmf_msgbuf_update_rxbufpost_count(msgbuf, 1); - -@@ -1148,7 +1147,14 @@ brcmf_msgbuf_process_rx_complete(struct - - skb_trim(skb, buflen); - -- brcmf_msgbuf_rx_skb(msgbuf, skb, rx_complete->msg.ifidx); -+ ifp = brcmf_get_ifp(msgbuf->drvr, rx_complete->msg.ifidx); -+ if (!ifp || !ifp->ndev) { -+ brcmf_err("Received pkt for invalid ifidx %d\n", -+ rx_complete->msg.ifidx); -+ brcmu_pkt_buf_free_skb(skb); -+ return; -+ } -+ brcmf_netif_rx(ifp, skb, false); - } - - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -1294,6 +1294,17 @@ static inline u8 brcmf_sdio_getdatoffset - return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT); - } - -+static inline bool brcmf_sdio_fromevntchan(u8 *swheader) -+{ -+ u32 hdrvalue; -+ u8 ret; -+ -+ hdrvalue = *(u32 *)swheader; -+ ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT); -+ -+ return (ret == SDPCM_EVENT_CHANNEL); -+} -+ - static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, - struct brcmf_sdio_hdrinfo *rd, - enum brcmf_sdio_frmtype type) -@@ -1641,7 +1652,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf - pfirst->len, pfirst->next, - pfirst->prev); - skb_unlink(pfirst, &bus->glom); -- brcmf_rx_frame(bus->sdiodev->dev, pfirst); -+ if (brcmf_sdio_fromevntchan(pfirst->data)) -+ brcmf_rx_event(bus->sdiodev->dev, pfirst); -+ else -+ brcmf_rx_frame(bus->sdiodev->dev, pfirst, -+ false); - bus->sdcnt.rxglompkts++; - } - -@@ -1967,18 +1982,19 @@ static uint brcmf_sdio_readframes(struct - __skb_trim(pkt, rd->len); - skb_pull(pkt, rd->dat_offset); - -+ if (pkt->len == 0) -+ brcmu_pkt_buf_free_skb(pkt); -+ else if (rd->channel == SDPCM_EVENT_CHANNEL) -+ brcmf_rx_event(bus->sdiodev->dev, pkt); -+ else -+ brcmf_rx_frame(bus->sdiodev->dev, pkt, -+ false); -+ - /* prepare the descriptor for the next read */ - rd->len = rd->len_nxtfrm << 4; - rd->len_nxtfrm = 0; - /* treat all packet as event if we don't know */ - rd->channel = SDPCM_EVENT_CHANNEL; -- -- if (pkt->len == 0) { -- brcmu_pkt_buf_free_skb(pkt); -- continue; -- } -- -- brcmf_rx_frame(bus->sdiodev->dev, pkt); - } - - rxcount = maxframes - rxleft; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -@@ -514,7 +514,7 @@ static void brcmf_usb_rx_complete(struct - - if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) { - skb_put(skb, urb->actual_length); -- brcmf_rx_frame(devinfo->dev, skb); -+ brcmf_rx_frame(devinfo->dev, skb, true); - brcmf_usb_rx_refill(devinfo, req); - } else { - brcmu_pkt_buf_free_skb(skb); diff --git a/package/kernel/mac80211/patches/349-0006-brcmfmac-cleanup-ampdu-rx-host-reorder-code.patch b/package/kernel/mac80211/patches/349-0006-brcmfmac-cleanup-ampdu-rx-host-reorder-code.patch deleted file mode 100644 index 33b263df3a..0000000000 --- a/package/kernel/mac80211/patches/349-0006-brcmfmac-cleanup-ampdu-rx-host-reorder-code.patch +++ /dev/null @@ -1,585 +0,0 @@ -From: Arend van Spriel -Date: Mon, 11 Apr 2016 11:35:26 +0200 -Subject: [PATCH] brcmfmac: cleanup ampdu-rx host reorder code - -The code for ampdu-rx host reorder is related to the firmware signalling -supported in BCDC protocol. This change moves the code to fwsignal module. - -Reviewed-by: Hante Meuleman -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -351,6 +351,12 @@ brcmf_proto_bcdc_add_tdls_peer(struct br - { - } - -+static void brcmf_proto_bcdc_rxreorder(struct brcmf_if *ifp, -+ struct sk_buff *skb) -+{ -+ brcmf_fws_rxreorder(ifp, skb); -+} -+ - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) - { - struct brcmf_bcdc *bcdc; -@@ -372,6 +378,7 @@ int brcmf_proto_bcdc_attach(struct brcmf - drvr->proto->configure_addr_mode = brcmf_proto_bcdc_configure_addr_mode; - drvr->proto->delete_peer = brcmf_proto_bcdc_delete_peer; - drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer; -+ drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder; - drvr->proto->pd = bcdc; - - drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -40,19 +40,6 @@ - - #define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950) - --/* AMPDU rx reordering definitions */ --#define BRCMF_RXREORDER_FLOWID_OFFSET 0 --#define BRCMF_RXREORDER_MAXIDX_OFFSET 2 --#define BRCMF_RXREORDER_FLAGS_OFFSET 4 --#define BRCMF_RXREORDER_CURIDX_OFFSET 6 --#define BRCMF_RXREORDER_EXPIDX_OFFSET 8 -- --#define BRCMF_RXREORDER_DEL_FLOW 0x01 --#define BRCMF_RXREORDER_FLUSH_ALL 0x02 --#define BRCMF_RXREORDER_CURIDX_VALID 0x04 --#define BRCMF_RXREORDER_EXPIDX_VALID 0x08 --#define BRCMF_RXREORDER_NEW_HOLE 0x10 -- - #define BRCMF_BSSIDX_INVALID -1 - - char *brcmf_ifname(struct brcmf_if *ifp) -@@ -342,207 +329,11 @@ void brcmf_netif_rx(struct brcmf_if *ifp - netif_rx_ni(skb); - } - --static void brcmf_rxreorder_get_skb_list(struct brcmf_ampdu_rx_reorder *rfi, -- u8 start, u8 end, -- struct sk_buff_head *skb_list) --{ -- /* initialize return list */ -- __skb_queue_head_init(skb_list); -- -- if (rfi->pend_pkts == 0) { -- brcmf_dbg(INFO, "no packets in reorder queue\n"); -- return; -- } -- -- do { -- if (rfi->pktslots[start]) { -- __skb_queue_tail(skb_list, rfi->pktslots[start]); -- rfi->pktslots[start] = NULL; -- } -- start++; -- if (start > rfi->max_idx) -- start = 0; -- } while (start != end); -- rfi->pend_pkts -= skb_queue_len(skb_list); --} -- --static void brcmf_rxreorder_process_info(struct brcmf_if *ifp, u8 *reorder_data, -- struct sk_buff *pkt) --{ -- u8 flow_id, max_idx, cur_idx, exp_idx, end_idx; -- struct brcmf_ampdu_rx_reorder *rfi; -- struct sk_buff_head reorder_list; -- struct sk_buff *pnext; -- u8 flags; -- u32 buf_size; -- -- flow_id = reorder_data[BRCMF_RXREORDER_FLOWID_OFFSET]; -- flags = reorder_data[BRCMF_RXREORDER_FLAGS_OFFSET]; -- -- /* validate flags and flow id */ -- if (flags == 0xFF) { -- brcmf_err("invalid flags...so ignore this packet\n"); -- brcmf_netif_rx(ifp, pkt, false); -- return; -- } -- -- rfi = ifp->drvr->reorder_flows[flow_id]; -- if (flags & BRCMF_RXREORDER_DEL_FLOW) { -- brcmf_dbg(INFO, "flow-%d: delete\n", -- flow_id); -- -- if (rfi == NULL) { -- brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n", -- flow_id); -- brcmf_netif_rx(ifp, pkt, false); -- return; -- } -- -- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, rfi->exp_idx, -- &reorder_list); -- /* add the last packet */ -- __skb_queue_tail(&reorder_list, pkt); -- kfree(rfi); -- ifp->drvr->reorder_flows[flow_id] = NULL; -- goto netif_rx; -- } -- /* from here on we need a flow reorder instance */ -- if (rfi == NULL) { -- buf_size = sizeof(*rfi); -- max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; -- -- buf_size += (max_idx + 1) * sizeof(pkt); -- -- /* allocate space for flow reorder info */ -- brcmf_dbg(INFO, "flow-%d: start, maxidx %d\n", -- flow_id, max_idx); -- rfi = kzalloc(buf_size, GFP_ATOMIC); -- if (rfi == NULL) { -- brcmf_err("failed to alloc buffer\n"); -- brcmf_netif_rx(ifp, pkt, false); -- return; -- } -- -- ifp->drvr->reorder_flows[flow_id] = rfi; -- rfi->pktslots = (struct sk_buff **)(rfi+1); -- rfi->max_idx = max_idx; -- } -- if (flags & BRCMF_RXREORDER_NEW_HOLE) { -- if (rfi->pend_pkts) { -- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, -- rfi->exp_idx, -- &reorder_list); -- WARN_ON(rfi->pend_pkts); -- } else { -- __skb_queue_head_init(&reorder_list); -- } -- rfi->cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; -- rfi->exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -- rfi->max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; -- rfi->pktslots[rfi->cur_idx] = pkt; -- rfi->pend_pkts++; -- brcmf_dbg(DATA, "flow-%d: new hole %d (%d), pending %d\n", -- flow_id, rfi->cur_idx, rfi->exp_idx, rfi->pend_pkts); -- } else if (flags & BRCMF_RXREORDER_CURIDX_VALID) { -- cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; -- exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -- -- if ((exp_idx == rfi->exp_idx) && (cur_idx != rfi->exp_idx)) { -- /* still in the current hole */ -- /* enqueue the current on the buffer chain */ -- if (rfi->pktslots[cur_idx] != NULL) { -- brcmf_dbg(INFO, "HOLE: ERROR buffer pending..free it\n"); -- brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); -- rfi->pktslots[cur_idx] = NULL; -- } -- rfi->pktslots[cur_idx] = pkt; -- rfi->pend_pkts++; -- rfi->cur_idx = cur_idx; -- brcmf_dbg(DATA, "flow-%d: store pkt %d (%d), pending %d\n", -- flow_id, cur_idx, exp_idx, rfi->pend_pkts); -- -- /* can return now as there is no reorder -- * list to process. -- */ -- return; -- } -- if (rfi->exp_idx == cur_idx) { -- if (rfi->pktslots[cur_idx] != NULL) { -- brcmf_dbg(INFO, "error buffer pending..free it\n"); -- brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); -- rfi->pktslots[cur_idx] = NULL; -- } -- rfi->pktslots[cur_idx] = pkt; -- rfi->pend_pkts++; -- -- /* got the expected one. flush from current to expected -- * and update expected -- */ -- brcmf_dbg(DATA, "flow-%d: expected %d (%d), pending %d\n", -- flow_id, cur_idx, exp_idx, rfi->pend_pkts); -- -- rfi->cur_idx = cur_idx; -- rfi->exp_idx = exp_idx; -- -- brcmf_rxreorder_get_skb_list(rfi, cur_idx, exp_idx, -- &reorder_list); -- brcmf_dbg(DATA, "flow-%d: freeing buffers %d, pending %d\n", -- flow_id, skb_queue_len(&reorder_list), -- rfi->pend_pkts); -- } else { -- u8 end_idx; -- -- brcmf_dbg(DATA, "flow-%d (0x%x): both moved, old %d/%d, new %d/%d\n", -- flow_id, flags, rfi->cur_idx, rfi->exp_idx, -- cur_idx, exp_idx); -- if (flags & BRCMF_RXREORDER_FLUSH_ALL) -- end_idx = rfi->exp_idx; -- else -- end_idx = exp_idx; -- -- /* flush pkts first */ -- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, -- &reorder_list); -- -- if (exp_idx == ((cur_idx + 1) % (rfi->max_idx + 1))) { -- __skb_queue_tail(&reorder_list, pkt); -- } else { -- rfi->pktslots[cur_idx] = pkt; -- rfi->pend_pkts++; -- } -- rfi->exp_idx = exp_idx; -- rfi->cur_idx = cur_idx; -- } -- } else { -- /* explicity window move updating the expected index */ -- exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -- -- brcmf_dbg(DATA, "flow-%d (0x%x): change expected: %d -> %d\n", -- flow_id, flags, rfi->exp_idx, exp_idx); -- if (flags & BRCMF_RXREORDER_FLUSH_ALL) -- end_idx = rfi->exp_idx; -- else -- end_idx = exp_idx; -- -- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, -- &reorder_list); -- __skb_queue_tail(&reorder_list, pkt); -- /* set the new expected idx */ -- rfi->exp_idx = exp_idx; -- } --netif_rx: -- skb_queue_walk_safe(&reorder_list, pkt, pnext) { -- __skb_unlink(pkt, &reorder_list); -- brcmf_netif_rx(ifp, pkt, false); -- } --} -- - void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt) - { - struct brcmf_if *ifp; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; -- struct brcmf_skb_reorder_data *rd; - int ret; - - brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); -@@ -557,9 +348,8 @@ void brcmf_rx_frame(struct device *dev, - return; - } - -- rd = (struct brcmf_skb_reorder_data *)skb->cb; -- if (rd->reorder) -- brcmf_rxreorder_process_info(ifp, rd->reorder, skb); -+ if (brcmf_proto_is_reorder_skb(skb)) -+ brcmf_proto_rxreorder(ifp, skb); - else - brcmf_netif_rx(ifp, skb, handle_evnt); - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -208,10 +208,6 @@ struct brcmf_if { - u8 ipv6addr_idx; - }; - --struct brcmf_skb_reorder_data { -- u8 *reorder; --}; -- - int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp); - - /* Return pointer to interface name */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c -@@ -92,6 +92,19 @@ enum brcmf_fws_tlv_len { - }; - #undef BRCMF_FWS_TLV_DEF - -+/* AMPDU rx reordering definitions */ -+#define BRCMF_RXREORDER_FLOWID_OFFSET 0 -+#define BRCMF_RXREORDER_MAXIDX_OFFSET 2 -+#define BRCMF_RXREORDER_FLAGS_OFFSET 4 -+#define BRCMF_RXREORDER_CURIDX_OFFSET 6 -+#define BRCMF_RXREORDER_EXPIDX_OFFSET 8 -+ -+#define BRCMF_RXREORDER_DEL_FLOW 0x01 -+#define BRCMF_RXREORDER_FLUSH_ALL 0x02 -+#define BRCMF_RXREORDER_CURIDX_VALID 0x04 -+#define BRCMF_RXREORDER_EXPIDX_VALID 0x08 -+#define BRCMF_RXREORDER_NEW_HOLE 0x10 -+ - #ifdef DEBUG - /* - * brcmf_fws_tlv_names - array of tlv names. -@@ -1614,6 +1627,202 @@ static int brcmf_fws_notify_bcmc_credit_ - return 0; - } - -+static void brcmf_rxreorder_get_skb_list(struct brcmf_ampdu_rx_reorder *rfi, -+ u8 start, u8 end, -+ struct sk_buff_head *skb_list) -+{ -+ /* initialize return list */ -+ __skb_queue_head_init(skb_list); -+ -+ if (rfi->pend_pkts == 0) { -+ brcmf_dbg(INFO, "no packets in reorder queue\n"); -+ return; -+ } -+ -+ do { -+ if (rfi->pktslots[start]) { -+ __skb_queue_tail(skb_list, rfi->pktslots[start]); -+ rfi->pktslots[start] = NULL; -+ } -+ start++; -+ if (start > rfi->max_idx) -+ start = 0; -+ } while (start != end); -+ rfi->pend_pkts -= skb_queue_len(skb_list); -+} -+ -+void brcmf_fws_rxreorder(struct brcmf_if *ifp, struct sk_buff *pkt) -+{ -+ u8 *reorder_data; -+ u8 flow_id, max_idx, cur_idx, exp_idx, end_idx; -+ struct brcmf_ampdu_rx_reorder *rfi; -+ struct sk_buff_head reorder_list; -+ struct sk_buff *pnext; -+ u8 flags; -+ u32 buf_size; -+ -+ reorder_data = ((struct brcmf_skb_reorder_data *)pkt->cb)->reorder; -+ flow_id = reorder_data[BRCMF_RXREORDER_FLOWID_OFFSET]; -+ flags = reorder_data[BRCMF_RXREORDER_FLAGS_OFFSET]; -+ -+ /* validate flags and flow id */ -+ if (flags == 0xFF) { -+ brcmf_err("invalid flags...so ignore this packet\n"); -+ brcmf_netif_rx(ifp, pkt, false); -+ return; -+ } -+ -+ rfi = ifp->drvr->reorder_flows[flow_id]; -+ if (flags & BRCMF_RXREORDER_DEL_FLOW) { -+ brcmf_dbg(INFO, "flow-%d: delete\n", -+ flow_id); -+ -+ if (rfi == NULL) { -+ brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n", -+ flow_id); -+ brcmf_netif_rx(ifp, pkt, false); -+ return; -+ } -+ -+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, rfi->exp_idx, -+ &reorder_list); -+ /* add the last packet */ -+ __skb_queue_tail(&reorder_list, pkt); -+ kfree(rfi); -+ ifp->drvr->reorder_flows[flow_id] = NULL; -+ goto netif_rx; -+ } -+ /* from here on we need a flow reorder instance */ -+ if (rfi == NULL) { -+ buf_size = sizeof(*rfi); -+ max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; -+ -+ buf_size += (max_idx + 1) * sizeof(pkt); -+ -+ /* allocate space for flow reorder info */ -+ brcmf_dbg(INFO, "flow-%d: start, maxidx %d\n", -+ flow_id, max_idx); -+ rfi = kzalloc(buf_size, GFP_ATOMIC); -+ if (rfi == NULL) { -+ brcmf_err("failed to alloc buffer\n"); -+ brcmf_netif_rx(ifp, pkt, false); -+ return; -+ } -+ -+ ifp->drvr->reorder_flows[flow_id] = rfi; -+ rfi->pktslots = (struct sk_buff **)(rfi + 1); -+ rfi->max_idx = max_idx; -+ } -+ if (flags & BRCMF_RXREORDER_NEW_HOLE) { -+ if (rfi->pend_pkts) { -+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, -+ rfi->exp_idx, -+ &reorder_list); -+ WARN_ON(rfi->pend_pkts); -+ } else { -+ __skb_queue_head_init(&reorder_list); -+ } -+ rfi->cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; -+ rfi->exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -+ rfi->max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; -+ rfi->pktslots[rfi->cur_idx] = pkt; -+ rfi->pend_pkts++; -+ brcmf_dbg(DATA, "flow-%d: new hole %d (%d), pending %d\n", -+ flow_id, rfi->cur_idx, rfi->exp_idx, rfi->pend_pkts); -+ } else if (flags & BRCMF_RXREORDER_CURIDX_VALID) { -+ cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; -+ exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -+ -+ if ((exp_idx == rfi->exp_idx) && (cur_idx != rfi->exp_idx)) { -+ /* still in the current hole */ -+ /* enqueue the current on the buffer chain */ -+ if (rfi->pktslots[cur_idx] != NULL) { -+ brcmf_dbg(INFO, "HOLE: ERROR buffer pending..free it\n"); -+ brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); -+ rfi->pktslots[cur_idx] = NULL; -+ } -+ rfi->pktslots[cur_idx] = pkt; -+ rfi->pend_pkts++; -+ rfi->cur_idx = cur_idx; -+ brcmf_dbg(DATA, "flow-%d: store pkt %d (%d), pending %d\n", -+ flow_id, cur_idx, exp_idx, rfi->pend_pkts); -+ -+ /* can return now as there is no reorder -+ * list to process. -+ */ -+ return; -+ } -+ if (rfi->exp_idx == cur_idx) { -+ if (rfi->pktslots[cur_idx] != NULL) { -+ brcmf_dbg(INFO, "error buffer pending..free it\n"); -+ brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); -+ rfi->pktslots[cur_idx] = NULL; -+ } -+ rfi->pktslots[cur_idx] = pkt; -+ rfi->pend_pkts++; -+ -+ /* got the expected one. flush from current to expected -+ * and update expected -+ */ -+ brcmf_dbg(DATA, "flow-%d: expected %d (%d), pending %d\n", -+ flow_id, cur_idx, exp_idx, rfi->pend_pkts); -+ -+ rfi->cur_idx = cur_idx; -+ rfi->exp_idx = exp_idx; -+ -+ brcmf_rxreorder_get_skb_list(rfi, cur_idx, exp_idx, -+ &reorder_list); -+ brcmf_dbg(DATA, "flow-%d: freeing buffers %d, pending %d\n", -+ flow_id, skb_queue_len(&reorder_list), -+ rfi->pend_pkts); -+ } else { -+ u8 end_idx; -+ -+ brcmf_dbg(DATA, "flow-%d (0x%x): both moved, old %d/%d, new %d/%d\n", -+ flow_id, flags, rfi->cur_idx, rfi->exp_idx, -+ cur_idx, exp_idx); -+ if (flags & BRCMF_RXREORDER_FLUSH_ALL) -+ end_idx = rfi->exp_idx; -+ else -+ end_idx = exp_idx; -+ -+ /* flush pkts first */ -+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, -+ &reorder_list); -+ -+ if (exp_idx == ((cur_idx + 1) % (rfi->max_idx + 1))) { -+ __skb_queue_tail(&reorder_list, pkt); -+ } else { -+ rfi->pktslots[cur_idx] = pkt; -+ rfi->pend_pkts++; -+ } -+ rfi->exp_idx = exp_idx; -+ rfi->cur_idx = cur_idx; -+ } -+ } else { -+ /* explicity window move updating the expected index */ -+ exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; -+ -+ brcmf_dbg(DATA, "flow-%d (0x%x): change expected: %d -> %d\n", -+ flow_id, flags, rfi->exp_idx, exp_idx); -+ if (flags & BRCMF_RXREORDER_FLUSH_ALL) -+ end_idx = rfi->exp_idx; -+ else -+ end_idx = exp_idx; -+ -+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, -+ &reorder_list); -+ __skb_queue_tail(&reorder_list, pkt); -+ /* set the new expected idx */ -+ rfi->exp_idx = exp_idx; -+ } -+netif_rx: -+ skb_queue_walk_safe(&reorder_list, pkt, pnext) { -+ __skb_unlink(pkt, &reorder_list); -+ brcmf_netif_rx(ifp, pkt, false); -+ } -+} -+ - void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb) - { - struct brcmf_skb_reorder_data *rd; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h -@@ -29,5 +29,6 @@ void brcmf_fws_add_interface(struct brcm - void brcmf_fws_del_interface(struct brcmf_if *ifp); - void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb); - void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked); -+void brcmf_fws_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb); - - #endif /* FWSIGNAL_H_ */ ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -@@ -527,6 +527,9 @@ static int brcmf_msgbuf_hdrpull(struct b - return -ENODEV; - } - -+static void brcmf_msgbuf_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb) -+{ -+} - - static void - brcmf_msgbuf_remove_flowring(struct brcmf_msgbuf *msgbuf, u16 flowid) -@@ -1466,6 +1469,7 @@ int brcmf_proto_msgbuf_attach(struct brc - drvr->proto->configure_addr_mode = brcmf_msgbuf_configure_addr_mode; - drvr->proto->delete_peer = brcmf_msgbuf_delete_peer; - drvr->proto->add_tdls_peer = brcmf_msgbuf_add_tdls_peer; -+ drvr->proto->rxreorder = brcmf_msgbuf_rxreorder; - drvr->proto->pd = msgbuf; - - init_waitqueue_head(&msgbuf->ioctl_resp_wait); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -@@ -22,6 +22,9 @@ enum proto_addr_mode { - ADDR_DIRECT - }; - -+struct brcmf_skb_reorder_data { -+ u8 *reorder; -+}; - - struct brcmf_proto { - int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, -@@ -38,6 +41,7 @@ struct brcmf_proto { - u8 peer[ETH_ALEN]); - void (*add_tdls_peer)(struct brcmf_pub *drvr, int ifidx, - u8 peer[ETH_ALEN]); -+ void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb); - void *pd; - }; - -@@ -91,6 +95,18 @@ brcmf_proto_add_tdls_peer(struct brcmf_p - { - drvr->proto->add_tdls_peer(drvr, ifidx, peer); - } -+static inline bool brcmf_proto_is_reorder_skb(struct sk_buff *skb) -+{ -+ struct brcmf_skb_reorder_data *rd; -+ -+ rd = (struct brcmf_skb_reorder_data *)skb->cb; -+ return !!rd->reorder; -+} - -+static inline void -+brcmf_proto_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb) -+{ -+ ifp->drvr->proto->rxreorder(ifp, skb); -+} - - #endif /* BRCMFMAC_PROTO_H */ diff --git a/package/kernel/mac80211/patches/349-0007-brcmfmac-revise-handling-events-in-receive-path.patch b/package/kernel/mac80211/patches/349-0007-brcmfmac-revise-handling-events-in-receive-path.patch deleted file mode 100644 index a43feffe17..0000000000 --- a/package/kernel/mac80211/patches/349-0007-brcmfmac-revise-handling-events-in-receive-path.patch +++ /dev/null @@ -1,139 +0,0 @@ -From: Arend van Spriel -Date: Mon, 11 Apr 2016 11:35:27 +0200 -Subject: [PATCH] brcmfmac: revise handling events in receive path - -Move event handling out of brcmf_netif_rx() avoiding the need -to pass a flag. This flag is only ever true for USB hosts as -other interface use separate brcmf_rx_event() function. - -Reviewed-by: Hante Meuleman -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -@@ -216,7 +216,7 @@ bool brcmf_c_prec_enq(struct device *dev - int prec); - - /* Receive frame for delivery to OS. Callee disposes of rxp. */ --void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_evnt); -+void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_event); - /* Receive async event packet from firmware. Callee disposes of rxp. */ - void brcmf_rx_event(struct device *dev, struct sk_buff *rxp); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -298,18 +298,11 @@ void brcmf_txflowblock(struct device *de - brcmf_fws_bus_blocked(drvr, state); - } - --void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb, -- bool handle_event) -+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) - { -- skb->protocol = eth_type_trans(skb, ifp->ndev); -- - if (skb->pkt_type == PACKET_MULTICAST) - ifp->stats.multicast++; - -- /* Process special event packets */ -- if (handle_event) -- brcmf_fweh_process_skb(ifp->drvr, skb); -- - if (!(ifp->ndev->flags & IFF_UP)) { - brcmu_pkt_buf_free_skb(skb); - return; -@@ -329,7 +322,7 @@ void brcmf_netif_rx(struct brcmf_if *ifp - netif_rx_ni(skb); - } - --void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt) -+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event) - { - struct brcmf_if *ifp; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); -@@ -348,10 +341,17 @@ void brcmf_rx_frame(struct device *dev, - return; - } - -- if (brcmf_proto_is_reorder_skb(skb)) -+ skb->protocol = eth_type_trans(skb, ifp->ndev); -+ -+ if (brcmf_proto_is_reorder_skb(skb)) { - brcmf_proto_rxreorder(ifp, skb); -- else -- brcmf_netif_rx(ifp, skb, handle_evnt); -+ } else { -+ /* Process special event packets */ -+ if (handle_event) -+ brcmf_fweh_process_skb(ifp->drvr, skb); -+ -+ brcmf_netif_rx(ifp, skb); -+ } - } - - void brcmf_rx_event(struct device *dev, struct sk_buff *skb) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -221,8 +221,7 @@ int brcmf_get_next_free_bsscfgidx(struct - void brcmf_txflowblock_if(struct brcmf_if *ifp, - enum brcmf_netif_stop_reason reason, bool state); - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); --void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb, -- bool handle_event); -+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); - void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on); - int __init brcmf_core_init(void); - void __exit brcmf_core_exit(void); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c -@@ -1668,7 +1668,7 @@ void brcmf_fws_rxreorder(struct brcmf_if - /* validate flags and flow id */ - if (flags == 0xFF) { - brcmf_err("invalid flags...so ignore this packet\n"); -- brcmf_netif_rx(ifp, pkt, false); -+ brcmf_netif_rx(ifp, pkt); - return; - } - -@@ -1680,7 +1680,7 @@ void brcmf_fws_rxreorder(struct brcmf_if - if (rfi == NULL) { - brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n", - flow_id); -- brcmf_netif_rx(ifp, pkt, false); -+ brcmf_netif_rx(ifp, pkt); - return; - } - -@@ -1705,7 +1705,7 @@ void brcmf_fws_rxreorder(struct brcmf_if - rfi = kzalloc(buf_size, GFP_ATOMIC); - if (rfi == NULL) { - brcmf_err("failed to alloc buffer\n"); -- brcmf_netif_rx(ifp, pkt, false); -+ brcmf_netif_rx(ifp, pkt); - return; - } - -@@ -1819,7 +1819,7 @@ void brcmf_fws_rxreorder(struct brcmf_if - netif_rx: - skb_queue_walk_safe(&reorder_list, pkt, pnext) { - __skb_unlink(pkt, &reorder_list); -- brcmf_netif_rx(ifp, pkt, false); -+ brcmf_netif_rx(ifp, pkt); - } - } - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -@@ -1157,7 +1157,7 @@ brcmf_msgbuf_process_rx_complete(struct - brcmu_pkt_buf_free_skb(skb); - return; - } -- brcmf_netif_rx(ifp, skb, false); -+ brcmf_netif_rx(ifp, skb); - } - - diff --git a/package/kernel/mac80211/patches/349-0008-brcmfmac-create-common-function-for-handling-brcmf_p.patch b/package/kernel/mac80211/patches/349-0008-brcmfmac-create-common-function-for-handling-brcmf_p.patch deleted file mode 100644 index 08ea235fdd..0000000000 --- a/package/kernel/mac80211/patches/349-0008-brcmfmac-create-common-function-for-handling-brcmf_p.patch +++ /dev/null @@ -1,88 +0,0 @@ -From: Arend van Spriel -Date: Mon, 11 Apr 2016 11:35:28 +0200 -Subject: [PATCH] brcmfmac: create common function for handling - brcmf_proto_hdrpull() - -In receive path brcmf_proto_hdrpull() needs to be called and handled -similar in brcmf_rx_frame() and brcmf_rx_event(). Move that duplicated -code in separate function. - -Reviewed-by: Hante Meuleman -Reviewed-by: Pieter-Paul Giesberts -Reviewed-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -322,26 +322,35 @@ void brcmf_netif_rx(struct brcmf_if *ifp - netif_rx_ni(skb); - } - --void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event) -+static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb, -+ struct brcmf_if **ifp) - { -- struct brcmf_if *ifp; -- struct brcmf_bus *bus_if = dev_get_drvdata(dev); -- struct brcmf_pub *drvr = bus_if->drvr; - int ret; - -- brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); -- - /* process and remove protocol-specific header */ -- ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp); -+ ret = brcmf_proto_hdrpull(drvr, true, skb, ifp); - -- if (ret || !ifp || !ifp->ndev) { -+ if (ret || !(*ifp) || !(*ifp)->ndev) { - if (ret != -ENODATA && ifp) -- ifp->stats.rx_errors++; -+ (*ifp)->stats.rx_errors++; - brcmu_pkt_buf_free_skb(skb); -- return; -+ return -ENODATA; - } - -- skb->protocol = eth_type_trans(skb, ifp->ndev); -+ skb->protocol = eth_type_trans(skb, (*ifp)->ndev); -+ return 0; -+} -+ -+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event) -+{ -+ struct brcmf_if *ifp; -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pub *drvr = bus_if->drvr; -+ -+ brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); -+ -+ if (brcmf_rx_hdrpull(drvr, skb, &ifp)) -+ return; - - if (brcmf_proto_is_reorder_skb(skb)) { - brcmf_proto_rxreorder(ifp, skb); -@@ -359,21 +368,11 @@ void brcmf_rx_event(struct device *dev, - struct brcmf_if *ifp; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; -- int ret; - - brcmf_dbg(EVENT, "Enter: %s: rxp=%p\n", dev_name(dev), skb); - -- /* process and remove protocol-specific header */ -- ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp); -- -- if (ret || !ifp || !ifp->ndev) { -- if (ret != -ENODATA && ifp) -- ifp->stats.rx_errors++; -- brcmu_pkt_buf_free_skb(skb); -+ if (brcmf_rx_hdrpull(drvr, skb, &ifp)) - return; -- } -- -- skb->protocol = eth_type_trans(skb, ifp->ndev); - - brcmf_fweh_process_skb(ifp->drvr, skb); - brcmu_pkt_buf_free_skb(skb); diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch index 7351353076..463428371b 100644 --- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch +++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch @@ -8,7 +8,7 @@ + return; +#endif + - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + for (band = 0; band < NUM_NL80211_BANDS; band++) { if (!wiphy->bands[band]) continue; @@ -374,6 +378,10 @@ ath_reg_apply_ir_flags(struct wiphy *wip @@ -19,7 +19,7 @@ + return; +#endif + - sband = wiphy->bands[IEEE80211_BAND_2GHZ]; + sband = wiphy->bands[NL80211_BAND_2GHZ]; if (!sband) return; @@ -402,6 +410,10 @@ static void ath_reg_apply_radar_flags(st @@ -30,7 +30,7 @@ + return; +#endif + - if (!wiphy->bands[IEEE80211_BAND_5GHZ]) + if (!wiphy->bands[NL80211_BAND_5GHZ]) return; @@ -633,6 +645,11 @@ ath_regd_init_wiphy(struct ath_regulator @@ -59,7 +59,7 @@ ---help--- --- a/.local-symbols +++ b/.local-symbols -@@ -125,6 +125,7 @@ ADM8211= +@@ -127,6 +127,7 @@ ADM8211= ATH_COMMON= WLAN_VENDOR_ATH= ATH_DEBUG= diff --git a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch index 1a62484954..819e64f370 100644 --- a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch +++ b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi +@@ -728,6 +728,7 @@ static const struct ieee80211_iface_limi BIT(NL80211_IFTYPE_AP) }, { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) }, diff --git a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch index a7f9d9f8b9..4b6da975b3 100644 --- a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch +++ b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1301,6 +1301,53 @@ void ath9k_deinit_debug(struct ath_softc +@@ -1319,6 +1319,53 @@ void ath9k_deinit_debug(struct ath_softc ath9k_cmn_spectral_deinit_debug(&sc->spec_priv); } @@ -54,7 +54,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1320,6 +1367,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1338,6 +1385,8 @@ int ath9k_init_debug(struct ath_hw *ah) ath9k_tx99_init_debug(sc); ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy); diff --git a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch index 5892c3e17a..1825d77b7f 100644 --- a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch +++ b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -1024,23 +1024,23 @@ static int __init ath9k_init(void) +@@ -1030,23 +1030,23 @@ static int __init ath9k_init(void) { int error; diff --git a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch index 5ecf528e59..a105d40662 100644 --- a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch +++ b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1348,6 +1348,52 @@ static const struct file_operations fops +@@ -1366,6 +1366,52 @@ static const struct file_operations fops .owner = THIS_MODULE }; @@ -53,7 +53,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1369,6 +1415,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1387,6 +1433,8 @@ int ath9k_init_debug(struct ath_hw *ah) debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_eeprom); @@ -90,7 +90,7 @@ ichan->channel = chan->center_freq; ichan->chan = chan; @@ -308,7 +310,19 @@ static void ath9k_cmn_update_ichannel(st - if (chan->band == IEEE80211_BAND_5GHZ) + if (chan->band == NL80211_BAND_5GHZ) flags |= CHANNEL_5GHZ; - switch (chandef->width) { diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch index c84d1bc829..167eeff2d2 100644 --- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch +++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch @@ -20,7 +20,7 @@ #define AR9160_DEVID_PCI 0x0027 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c -@@ -751,6 +751,7 @@ static const struct pci_device_id ath_pc +@@ -761,6 +761,7 @@ static const struct pci_device_id ath_pc .driver_data = ATH9K_PCI_BT_ANT_DIV }, #endif diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch index e151a12967..28f5dcca90 100644 --- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch +++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch @@ -1,6 +1,6 @@ --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h -@@ -2363,6 +2363,7 @@ struct cfg80211_qos_map { +@@ -2406,6 +2406,7 @@ struct cfg80211_qos_map { * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful @@ -8,7 +8,7 @@ * * @set_wds_peer: set the WDS peer for a WDS interface * -@@ -2624,6 +2625,7 @@ struct cfg80211_ops { +@@ -2667,6 +2668,7 @@ struct cfg80211_ops { enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); @@ -18,7 +18,7 @@ const u8 *addr); --- a/include/net/mac80211.h +++ b/include/net/mac80211.h -@@ -1286,6 +1286,7 @@ enum ieee80211_smps_mode { +@@ -1305,6 +1305,7 @@ enum ieee80211_smps_mode { * * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces @@ -26,7 +26,7 @@ * * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled -@@ -1306,6 +1307,7 @@ enum ieee80211_smps_mode { +@@ -1325,6 +1326,7 @@ enum ieee80211_smps_mode { struct ieee80211_conf { u32 flags; int power_level, dynamic_ps_timeout; @@ -36,9 +36,9 @@ u8 ps_dtim_period; --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h -@@ -1790,6 +1790,9 @@ enum nl80211_commands { - * between scans. The scan plans are executed sequentially. - * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. +@@ -1819,6 +1819,9 @@ enum nl80211_commands { + * + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. @@ -46,9 +46,9 @@ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2164,6 +2167,8 @@ enum nl80211_attrs { - NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, - NL80211_ATTR_SCHED_SCAN_PLANS, +@@ -2201,6 +2204,8 @@ enum nl80211_attrs { + + NL80211_ATTR_PAD, + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + @@ -57,7 +57,7 @@ __NL80211_ATTR_AFTER_LAST, --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -2229,6 +2229,19 @@ static int ieee80211_get_tx_power(struct +@@ -2238,6 +2238,19 @@ static int ieee80211_get_tx_power(struct return 0; } @@ -77,7 +77,7 @@ static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, const u8 *addr) { -@@ -3403,6 +3416,7 @@ const struct cfg80211_ops mac80211_confi +@@ -3412,6 +3425,7 @@ const struct cfg80211_ops mac80211_confi .set_wiphy_params = ieee80211_set_wiphy_params, .set_tx_power = ieee80211_set_tx_power, .get_tx_power = ieee80211_get_tx_power, @@ -87,7 +87,7 @@ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h -@@ -1318,6 +1318,7 @@ struct ieee80211_local { +@@ -1322,6 +1322,7 @@ struct ieee80211_local { int dynamic_ps_forced_timeout; int user_power_level; /* in dBm, for all interfaces */ @@ -119,7 +119,7 @@ if (local->hw.conf.power_level != power) { changed |= IEEE80211_CONF_CHANGE_POWER; local->hw.conf.power_level = power; -@@ -586,6 +592,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ +@@ -588,6 +594,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ IEEE80211_RADIOTAP_MCS_HAVE_BW; local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; @@ -129,15 +129,15 @@ local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c -@@ -403,6 +403,7 @@ static const struct nla_policy nl80211_p - [NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 }, - [NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 }, - [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG }, +@@ -406,6 +406,7 @@ static const struct nla_policy nl80211_p + [NL80211_ATTR_PBSS] = { .type = NLA_FLAG }, + [NL80211_ATTR_BSS_SELECT] = { .type = NLA_NESTED }, + [NL80211_ATTR_STA_SUPPORT_P2P_PS] = { .type = NLA_U8 }, + [NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 }, }; /* policy for the key attributes */ -@@ -2220,6 +2221,20 @@ static int nl80211_set_wiphy(struct sk_b +@@ -2251,6 +2252,20 @@ static int nl80211_set_wiphy(struct sk_b if (result) return result; } diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch index 5a5e4643f5..60012662e1 100644 --- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch +++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch @@ -1,16 +1,16 @@ --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -814,6 +814,9 @@ static inline int ath9k_dump_btcoex(stru +@@ -813,6 +813,9 @@ static inline int ath9k_dump_btcoex(stru + #ifdef CPTCFG_MAC80211_LEDS void ath_init_leds(struct ath_softc *sc); void ath_deinit_leds(struct ath_softc *sc); - void ath_fill_led_pin(struct ath_softc *sc); +int ath_create_gpio_led(struct ath_softc *sc, int gpio, const char *name, -+ const char *trigger, bool active_low); ++ const char *trigger, bool active_low); + #else static inline void ath_init_leds(struct ath_softc *sc) { -@@ -953,6 +956,13 @@ void ath_ant_comb_scan(struct ath_softc +@@ -949,6 +952,13 @@ void ath_ant_comb_scan(struct ath_softc #define ATH9K_NUM_CHANCTX 2 /* supports 2 operating channels */ @@ -24,7 +24,7 @@ struct ath_softc { struct ieee80211_hw *hw; struct device *dev; -@@ -1005,9 +1015,8 @@ struct ath_softc { +@@ -1001,9 +1011,8 @@ struct ath_softc { spinlock_t chan_lock; #ifdef CPTCFG_MAC80211_LEDS @@ -38,24 +38,33 @@ #ifdef CPTCFG_ATH9K_DEBUGFS --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c -@@ -24,45 +24,102 @@ - static void ath_led_brightness(struct led_classdev *led_cdev, - enum led_brightness brightness) +@@ -22,7 +22,7 @@ + + #ifdef CPTCFG_MAC80211_LEDS + +-void ath_fill_led_pin(struct ath_softc *sc) ++static void ath_fill_led_pin(struct ath_softc *sc) { -- struct ath_softc *sc = container_of(led_cdev, struct ath_softc, led_cdev); -- u32 val = (brightness == LED_OFF); + struct ath_hw *ah = sc->sc_ah; + +@@ -39,61 +39,111 @@ void ath_fill_led_pin(struct ath_softc * + else + ah->led_pin = ATH_LED_PIN_DEF; + } ++} ++ ++static void ath_led_brightness(struct led_classdev *led_cdev, ++ enum led_brightness brightness) ++{ + struct ath_led *led = container_of(led_cdev, struct ath_led, cdev); + struct ath_softc *sc = led->sc; - -- if (sc->sc_ah->config.led_active_high) -- val = !val; ++ + ath9k_ps_wakeup(sc); + ath9k_hw_set_gpio(sc->sc_ah, led->gpio->gpio, + (brightness != LED_OFF) ^ led->gpio->active_low); + ath9k_ps_restore(sc); +} - -- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val); ++ +static int ath_add_led(struct ath_softc *sc, struct ath_led *led) +{ + const struct gpio_led *gpio = led->gpio; @@ -71,30 +80,40 @@ + + led->sc = sc; + list_add(&led->list, &sc->leds); -+ -+ /* Configure gpio for output */ -+ ath9k_hw_cfg_output(sc->sc_ah, gpio->gpio, -+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT); -+ + + /* Configure gpio for output */ +- ath9k_hw_gpio_request_out(ah, ah->led_pin, "ath9k-led", ++ ath9k_hw_gpio_request_out(sc->sc_ah, gpio->gpio, gpio->name, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + +- /* LED off, active low */ +- ath9k_hw_set_gpio(ah, ah->led_pin, ah->config.led_active_high ? 0 : 1); + /* LED off */ + ath9k_hw_set_gpio(sc->sc_ah, gpio->gpio, gpio->active_low); + + return 0; -+} -+ + } + +-static void ath_led_brightness(struct led_classdev *led_cdev, +- enum led_brightness brightness) +int ath_create_gpio_led(struct ath_softc *sc, int gpio_num, const char *name, + const char *trigger, bool active_low) -+{ + { +- struct ath_softc *sc = container_of(led_cdev, struct ath_softc, led_cdev); +- u32 val = (brightness == LED_OFF); + struct ath_led *led; + struct gpio_led *gpio; + char *_name; + int ret; -+ + +- if (sc->sc_ah->config.led_active_high) +- val = !val; + led = kzalloc(sizeof(*led) + sizeof(*gpio) + strlen(name) + 1, + GFP_KERNEL); + if (!led) + return -ENOMEM; -+ + +- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val); + led->gpio = gpio = (struct gpio_led *) (led + 1); + _name = (char *) (led->gpio + 1); + @@ -115,15 +134,18 @@ { - if (!sc->led_registered) - return; -+ struct ath_led *led; - +- - ath_led_brightness(&sc->led_cdev, LED_OFF); - led_classdev_unregister(&sc->led_cdev); ++ struct ath_led *led; + +- ath9k_hw_gpio_free(sc->sc_ah, sc->sc_ah->led_pin); + while (!list_empty(&sc->leds)) { + led = list_first_entry(&sc->leds, struct ath_led, list); + list_del(&led->list); + ath_led_brightness(&led->cdev, LED_OFF); + led_classdev_unregister(&led->cdev); ++ ath9k_hw_gpio_free(sc->sc_ah, led->gpio->gpio); + kfree(led); + } } @@ -139,6 +161,8 @@ if (AR_SREV_9100(sc->sc_ah)) return; + ath_fill_led_pin(sc); + - if (!ath9k_led_blink) - sc->led_cdev.default_trigger = - ieee80211_get_radio_led_name(sc->hw); @@ -159,13 +183,14 @@ + trigger = ieee80211_get_radio_led_name(sc->hw); - sc->led_registered = true; -+ ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high); ++ ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, ++ !sc->sc_ah->config.led_active_high); } + #endif - void ath_fill_led_pin(struct ath_softc *sc) --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -936,7 +936,7 @@ int ath9k_init_device(u16 devid, struct +@@ -942,7 +942,7 @@ int ath9k_init_device(u16 devid, struct #ifdef CPTCFG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ @@ -176,7 +201,7 @@ #endif --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1393,6 +1393,61 @@ static const struct file_operations fops +@@ -1411,6 +1411,61 @@ static const struct file_operations fops .llseek = default_llseek, }; @@ -238,7 +263,7 @@ int ath9k_init_debug(struct ath_hw *ah) { -@@ -1417,6 +1472,10 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1435,6 +1490,10 @@ int ath9k_init_debug(struct ath_hw *ah) &fops_eeprom); debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_chanbw); diff --git a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch index 7c10ea6b0d..f656697a07 100644 --- a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch +++ b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch @@ -1,6 +1,6 @@ --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h -@@ -41,6 +41,9 @@ struct ath9k_platform_data { +@@ -45,6 +45,9 @@ struct ath9k_platform_data { int (*external_reset)(void); bool use_eeprom; @@ -20,7 +20,7 @@ /********************************/ /* LED functions */ -@@ -88,6 +89,24 @@ int ath_create_gpio_led(struct ath_softc +@@ -108,6 +109,24 @@ int ath_create_gpio_led(struct ath_softc return ret; } @@ -45,7 +45,7 @@ void ath_deinit_leds(struct ath_softc *sc) { struct ath_led *led; -@@ -103,8 +122,10 @@ void ath_deinit_leds(struct ath_softc *s +@@ -124,8 +143,10 @@ void ath_deinit_leds(struct ath_softc *s void ath_init_leds(struct ath_softc *sc) { @@ -56,10 +56,10 @@ INIT_LIST_HEAD(&sc->leds); -@@ -120,6 +141,12 @@ void ath_init_leds(struct ath_softc *sc) - trigger = ieee80211_get_radio_led_name(sc->hw); +@@ -144,6 +165,12 @@ void ath_init_leds(struct ath_softc *sc) - ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high); + ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, + !sc->sc_ah->config.led_active_high); + + if (!pdata) + return; @@ -67,5 +67,5 @@ + for (i = 0; i < pdata->num_leds; i++) + ath_create_platform_led(sc, &pdata->leds[i]); } + #endif - void ath_fill_led_pin(struct ath_softc *sc) diff --git a/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch index 6d62a2b1c2..986f155192 100644 --- a/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch +++ b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch @@ -1,6 +1,6 @@ --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h -@@ -36,6 +36,7 @@ struct ath9k_platform_data { +@@ -40,6 +40,7 @@ struct ath9k_platform_data { bool tx_gain_buffalo; bool disable_2ghz; bool disable_5ghz; @@ -10,7 +10,7 @@ int (*external_reset)(void); --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -577,6 +577,7 @@ static int ath9k_init_softc(u16 devid, s +@@ -581,6 +581,7 @@ static int ath9k_init_softc(u16 devid, s ah->external_reset = pdata->external_reset; ah->disable_2ghz = pdata->disable_2ghz; ah->disable_5ghz = pdata->disable_5ghz; diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch index e83c6bfbf9..f4bb0f2d90 100644 --- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch +++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1449,6 +1449,50 @@ static const struct file_operations fops +@@ -1467,6 +1467,50 @@ static const struct file_operations fops #endif @@ -51,7 +51,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1476,6 +1520,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1494,6 +1538,8 @@ int ath9k_init_debug(struct ath_hw *ah) debugfs_create_file("gpio_led", S_IWUSR, sc->debug.debugfs_phy, sc, &fops_gpio_led); #endif @@ -62,7 +62,7 @@ debugfs_create_devm_seqfile(sc->dev, "interrupt", sc->debug.debugfs_phy, --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -519,6 +519,12 @@ enum { +@@ -520,6 +520,12 @@ enum { ATH9K_RESET_COLD, }; @@ -75,7 +75,7 @@ struct ath9k_hw_version { u32 magic; u16 devid; -@@ -804,6 +810,8 @@ struct ath_hw { +@@ -805,6 +811,8 @@ struct ath_hw { u32 rfkill_polarity; u32 ah_flags; @@ -84,7 +84,7 @@ bool reset_power_on; bool htc_reset_init; -@@ -1066,6 +1074,7 @@ void ath9k_hw_check_nav(struct ath_hw *a +@@ -1067,6 +1075,7 @@ void ath9k_hw_check_nav(struct ath_hw *a bool ath9k_hw_check_alive(struct ath_hw *ah); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); @@ -94,7 +94,7 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah, --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1819,6 +1819,20 @@ u32 ath9k_hw_get_tsf_offset(struct times +@@ -1821,6 +1821,20 @@ u32 ath9k_hw_get_tsf_offset(struct times } EXPORT_SYMBOL(ath9k_hw_get_tsf_offset); @@ -115,7 +115,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, struct ath9k_hw_cal_data *caldata, bool fastcc) { -@@ -2027,6 +2041,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st +@@ -2029,6 +2043,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st ar9003_hw_disable_phy_restart(ah); ath9k_hw_apply_gpio_override(ah); diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch index d7bb5a12ce..7da71653a9 100644 --- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch +++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -720,6 +720,7 @@ struct ath_spec_scan { +@@ -721,6 +721,7 @@ struct ath_spec_scan { * @config_pci_powersave: * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC * @@ -8,7 +8,7 @@ * @spectral_scan_config: set parameters for spectral scan and enable/disable it * @spectral_scan_trigger: trigger a spectral scan run * @spectral_scan_wait: wait for a spectral scan run to finish -@@ -742,6 +743,7 @@ struct ath_hw_ops { +@@ -743,6 +744,7 @@ struct ath_hw_ops { struct ath_hw_antcomb_conf *antconf); void (*antdiv_comb_conf_set)(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf); @@ -18,7 +18,7 @@ void (*spectral_scan_trigger)(struct ath_hw *ah); --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -1998,6 +1998,26 @@ void ar9003_hw_init_rate_txpower(struct +@@ -1945,6 +1945,26 @@ void ar9003_hw_init_rate_txpower(struct } } @@ -45,7 +45,7 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -@@ -2034,6 +2054,7 @@ void ar9003_hw_attach_phy_ops(struct ath +@@ -1981,6 +2001,7 @@ void ar9003_hw_attach_phy_ops(struct ath priv_ops->set_radar_params = ar9003_hw_set_radar_params; priv_ops->fast_chan_change = ar9003_hw_fast_chan_change; @@ -55,9 +55,9 @@ ops->spectral_scan_config = ar9003_hw_spectral_scan_config; --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -711,7 +711,8 @@ static void ath9k_init_txpower_limits(st +@@ -717,7 +717,8 @@ static void ath9k_init_txpower_limits(st if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) - ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ); + ath9k_init_band_txpower(sc, NL80211_BAND_5GHZ); - ah->curchan = curchan; + if (curchan) @@ -65,7 +65,7 @@ } static const struct ieee80211_iface_limit if_limits[] = { -@@ -897,6 +898,18 @@ static void ath9k_set_hw_capab(struct at +@@ -903,6 +904,18 @@ static void ath9k_set_hw_capab(struct at SET_IEEE80211_PERM_ADDR(hw, common->macaddr); } @@ -84,7 +84,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, const struct ath_bus_ops *bus_ops) { -@@ -942,6 +955,8 @@ int ath9k_init_device(u16 devid, struct +@@ -948,6 +961,8 @@ int ath9k_init_device(u16 devid, struct ARRAY_SIZE(ath9k_tpt_blink)); #endif @@ -110,7 +110,7 @@ static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -1327,9 +1327,30 @@ void ar5008_hw_init_rate_txpower(struct +@@ -1325,9 +1325,30 @@ void ar5008_hw_init_rate_txpower(struct } } @@ -141,7 +141,7 @@ static const u32 ar5416_cca_regs[6] = { AR_PHY_CCA, AR_PHY_CH1_CCA, -@@ -1344,6 +1365,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ +@@ -1342,6 +1363,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ if (ret) return ret; diff --git a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch index 8768c5d89a..9462fcaafa 100644 --- a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch +++ b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch @@ -40,7 +40,7 @@ return true; } -@@ -1797,8 +1816,14 @@ static int ath9k_hw_do_fastcc(struct ath +@@ -1799,8 +1818,14 @@ static int ath9k_hw_do_fastcc(struct ath if (AR_SREV_9271(ah)) ar9002_hw_load_ani_reg(ah, chan); @@ -55,7 +55,7 @@ return -EINVAL; } -@@ -2052,6 +2077,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st +@@ -2054,6 +2079,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st ath9k_hw_set_radar_params(ah); } diff --git a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch index 3d24ccda1f..b639f972d8 100644 --- a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch +++ b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -956,55 +956,6 @@ static bool ar5008_hw_ani_control_new(st +@@ -954,55 +954,6 @@ static bool ar5008_hw_ani_control_new(st * on == 0 means more noise imm */ u32 on = param ? 1 : 0; @@ -58,7 +58,7 @@ REG_SET_BIT(ah, AR_PHY_SFCORR_LOW, --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -41,20 +41,6 @@ static const int cycpwrThr1_table[] = +@@ -42,20 +42,6 @@ static const int cycpwrThr1_table[] = /* level: 0 1 2 3 4 5 6 7 8 */ { -6, -4, -2, 0, 2, 4, 6, 8 }; /* lvl 0-7, default 3 */ @@ -79,7 +79,7 @@ static const u8 ofdm2pwr[] = { ALL_TARGET_LEGACY_6_24, ALL_TARGET_LEGACY_6_24, -@@ -1089,11 +1075,6 @@ static bool ar9003_hw_ani_control(struct +@@ -1095,11 +1081,6 @@ static bool ar9003_hw_ani_control(struct struct ath_common *common = ath9k_hw_common(ah); struct ath9k_channel *chan = ah->curchan; struct ar5416AniState *aniState = &ah->ani; @@ -91,7 +91,7 @@ s32 value, value2; switch (cmd & ah->ani_function) { -@@ -1107,61 +1088,6 @@ static bool ar9003_hw_ani_control(struct +@@ -1113,61 +1094,6 @@ static bool ar9003_hw_ani_control(struct */ u32 on = param ? 1 : 0; diff --git a/package/kernel/mac80211/patches/546-ath9k_platform_led_name.patch b/package/kernel/mac80211/patches/546-ath9k_platform_led_name.patch index 8d2d899112..ced72c6c69 100644 --- a/package/kernel/mac80211/patches/546-ath9k_platform_led_name.patch +++ b/package/kernel/mac80211/patches/546-ath9k_platform_led_name.patch @@ -13,9 +13,9 @@ Signed-off-by: Michal Cieslakiewicz --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c -@@ -132,15 +132,19 @@ void ath_init_leds(struct ath_softc *sc) - if (AR_SREV_9100(sc->sc_ah)) - return; +@@ -155,8 +155,11 @@ void ath_init_leds(struct ath_softc *sc) + + ath_fill_led_pin(sc); - snprintf(led_name, sizeof(led_name), "ath9k-%s", - wiphy_name(sc->hw->wiphy)); @@ -23,22 +23,13 @@ Signed-off-by: Michal Cieslakiewicz + strncpy(led_name, pdata->led_name, sizeof(led_name)); + else + snprintf(led_name, sizeof(led_name), "ath9k-%s", -+ wiphy_name(sc->hw->wiphy)); ++ wiphy_name(sc->hw->wiphy)); if (ath9k_led_blink) trigger = sc->led_default_trigger; - else - trigger = ieee80211_get_radio_led_name(sc->hw); - -- ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high); -+ ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, -+ !sc->sc_ah->config.led_active_high); - - if (!pdata) - return; --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h -@@ -45,6 +45,7 @@ struct ath9k_platform_data { +@@ -49,6 +49,7 @@ struct ath9k_platform_data { int num_leds; const struct gpio_led *leds; diff --git a/package/kernel/mac80211/patches/547-ath9k_led_defstate_fix.patch b/package/kernel/mac80211/patches/547-ath9k_led_defstate_fix.patch index db0b61996f..5d84cf0c42 100644 --- a/package/kernel/mac80211/patches/547-ath9k_led_defstate_fix.patch +++ b/package/kernel/mac80211/patches/547-ath9k_led_defstate_fix.patch @@ -13,9 +13,9 @@ Signed-off-by: Michal Cieslakiewicz --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c -@@ -54,8 +54,11 @@ static int ath_add_led(struct ath_softc - ath9k_hw_cfg_output(sc->sc_ah, gpio->gpio, - AR_GPIO_OUTPUT_MUX_AS_OUTPUT); +@@ -74,8 +74,11 @@ static int ath_add_led(struct ath_softc + ath9k_hw_gpio_request_out(sc->sc_ah, gpio->gpio, gpio->name, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); - /* LED off */ - ath9k_hw_set_gpio(sc->sc_ah, gpio->gpio, gpio->active_low); diff --git a/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch b/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch index f91d85c6f8..0bc4fb3dd1 100644 --- a/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch +++ b/package/kernel/mac80211/patches/548-ath9k_enable_gpio_chip.patch @@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau #include "common.h" #include "debug.h" -@@ -963,6 +964,14 @@ struct ath_led { +@@ -959,6 +960,14 @@ struct ath_led { struct led_classdev cdev; }; @@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau struct ath_softc { struct ieee80211_hw *hw; struct device *dev; -@@ -1017,6 +1026,9 @@ struct ath_softc { +@@ -1013,6 +1022,9 @@ struct ath_softc { #ifdef CPTCFG_MAC80211_LEDS const char *led_default_trigger; struct list_head leds; @@ -45,7 +45,7 @@ Signed-off-by: Felix Fietkau #ifdef CPTCFG_ATH9K_DEBUGFS --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c -@@ -16,12 +16,138 @@ +@@ -16,13 +16,138 @@ #include "ath9k.h" #include @@ -65,7 +65,7 @@ Signed-off-by: Felix Fietkau + struct ath9k_gpio_chip *gc = container_of(chip, struct ath9k_gpio_chip, + gchip); + -+ ath9k_hw_cfg_gpio_input(gc->sc->sc_ah, offset); ++ ath9k_hw_gpio_request_in(gc->sc->sc_ah, offset, "ath9k-gpio"); + + return 0; +} @@ -77,8 +77,8 @@ Signed-off-by: Felix Fietkau + struct ath9k_gpio_chip *gc = container_of(chip, struct ath9k_gpio_chip, + gchip); + -+ ath9k_hw_cfg_output(gc->sc->sc_ah, offset, -+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ++ ath9k_hw_gpio_request_out(gc->sc->sc_ah, offset, "ath9k-gpio", ++ AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(gc->sc->sc_ah, offset, value); + + return 0; @@ -182,10 +182,11 @@ Signed-off-by: Felix Fietkau /********************************/ -#ifdef CPTCFG_MAC80211_LEDS - static void ath_led_brightness(struct led_classdev *led_cdev, - enum led_brightness brightness) +- + static void ath_fill_led_pin(struct ath_softc *sc) { -@@ -60,6 +186,12 @@ static int ath_add_led(struct ath_softc + struct ath_hw *ah = sc->sc_ah; +@@ -80,6 +205,12 @@ static int ath_add_led(struct ath_softc else ath9k_hw_set_gpio(sc->sc_ah, gpio->gpio, gpio->active_low); @@ -198,7 +199,7 @@ Signed-off-by: Felix Fietkau return 0; } -@@ -116,11 +248,17 @@ void ath_deinit_leds(struct ath_softc *s +@@ -136,12 +267,18 @@ void ath_deinit_leds(struct ath_softc *s while (!list_empty(&sc->leds)) { led = list_first_entry(&sc->leds, struct ath_led, list); @@ -210,24 +211,25 @@ Signed-off-by: Felix Fietkau list_del(&led->list); ath_led_brightness(&led->cdev, LED_OFF); led_classdev_unregister(&led->cdev); + ath9k_hw_gpio_free(sc->sc_ah, led->gpio->gpio); kfree(led); } + ath9k_unregister_gpio_chip(sc); } void ath_init_leds(struct ath_softc *sc) -@@ -135,6 +273,8 @@ void ath_init_leds(struct ath_softc *sc) - if (AR_SREV_9100(sc->sc_ah)) - return; +@@ -158,6 +295,8 @@ void ath_init_leds(struct ath_softc *sc) + + ath_fill_led_pin(sc); + ath9k_register_gpio_chip(sc); + if (pdata && pdata->led_name) strncpy(led_name, pdata->led_name, sizeof(led_name)); else -@@ -186,6 +326,7 @@ void ath_fill_led_pin(struct ath_softc * - /* LED off, active low */ - ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); +@@ -178,6 +317,7 @@ void ath_init_leds(struct ath_softc *sc) + for (i = 0; i < pdata->num_leds; i++) + ath_create_platform_led(sc, &pdata->leds[i]); } + #endif diff --git a/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch b/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch index 05274065c7..2e1623555f 100644 --- a/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch +++ b/package/kernel/mac80211/patches/549-ath9k_enable_gpio_buttons.patch @@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau --- --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -1028,6 +1028,7 @@ struct ath_softc { +@@ -1024,6 +1024,7 @@ struct ath_softc { struct list_head leds; #ifdef CONFIG_GPIOLIB struct ath9k_gpio_chip *gpiochip; @@ -29,7 +29,7 @@ Signed-off-by: Felix Fietkau #ifdef CPTCFG_MAC80211_LEDS -@@ -132,6 +134,63 @@ static void ath9k_unregister_gpio_chip(s +@@ -132,6 +134,64 @@ static void ath9k_unregister_gpio_chip(s sc->gpiochip = NULL; } @@ -59,7 +59,8 @@ Signed-off-by: Felix Fietkau + return; + + for (i = 0; i < pdata->num_btns; i++) { -+ ath9k_hw_cfg_gpio_input(sc->sc_ah, pdata->btns[i].gpio); ++ ath9k_hw_gpio_request_in(sc->sc_ah, pdata->btns[i].gpio, ++ "ath9k-gpio"); + bt[i].gpio = sc->gpiochip->gchip.base + pdata->btns[i].gpio; + } + @@ -93,7 +94,7 @@ Signed-off-by: Felix Fietkau #else /* CONFIG_GPIOLIB */ static inline void ath9k_register_gpio_chip(struct ath_softc *sc) -@@ -142,6 +201,14 @@ static inline void ath9k_unregister_gpio +@@ -142,6 +202,14 @@ static inline void ath9k_unregister_gpio { } @@ -108,7 +109,7 @@ Signed-off-by: Felix Fietkau #endif /* CONFIG_GPIOLIB */ /********************************/ -@@ -246,6 +313,7 @@ void ath_deinit_leds(struct ath_softc *s +@@ -265,6 +333,7 @@ void ath_deinit_leds(struct ath_softc *s { struct ath_led *led; @@ -116,17 +117,17 @@ Signed-off-by: Felix Fietkau while (!list_empty(&sc->leds)) { led = list_first_entry(&sc->leds, struct ath_led, list); #ifdef CONFIG_GPIOLIB -@@ -274,6 +342,7 @@ void ath_init_leds(struct ath_softc *sc) - return; +@@ -296,6 +365,7 @@ void ath_init_leds(struct ath_softc *sc) + ath_fill_led_pin(sc); ath9k_register_gpio_chip(sc); + ath9k_init_buttons(sc); if (pdata && pdata->led_name) strncpy(led_name, pdata->led_name, sizeof(led_name)); -@@ -289,7 +358,7 @@ void ath_init_leds(struct ath_softc *sc) +@@ -311,7 +381,7 @@ void ath_init_leds(struct ath_softc *sc) ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, - !sc->sc_ah->config.led_active_high); + !sc->sc_ah->config.led_active_high); - if (!pdata) + if (!pdata || !pdata->leds || !pdata->num_leds) @@ -135,7 +136,7 @@ Signed-off-by: Felix Fietkau for (i = 0; i < pdata->num_leds; i++) --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h -@@ -46,6 +46,10 @@ struct ath9k_platform_data { +@@ -50,6 +50,10 @@ struct ath9k_platform_data { int num_leds; const struct gpio_led *leds; const char *led_name; diff --git a/package/kernel/mac80211/patches/550-ath9k_add_ar9280_gpio_chip.patch b/package/kernel/mac80211/patches/550-ath9k_add_ar9280_gpio_chip.patch index 3fe7e43209..22e2c66747 100644 --- a/package/kernel/mac80211/patches/550-ath9k_add_ar9280_gpio_chip.patch +++ b/package/kernel/mac80211/patches/550-ath9k_add_ar9280_gpio_chip.patch @@ -21,7 +21,7 @@ Signed-off-by: Michal Cieslakiewicz else if (AR_SREV_9285(sc->sc_ah)) ng = AR9285_NUM_GPIO; + else if (AR_SREV_9280(sc->sc_ah)) -+ ng = AR928X_NUM_GPIO; ++ ng = AR9280_NUM_GPIO; else return; diff --git a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch index 82459091fe..db70a334bd 100644 --- a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch +++ b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch @@ -24,7 +24,7 @@ Changes since v1: --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7722,6 +7722,7 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -7726,6 +7726,7 @@ static int rt2800_probe_rt(struct rt2x00 int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) { @@ -32,7 +32,7 @@ Changes since v1: int retval; u32 reg; -@@ -7729,6 +7730,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7733,6 +7734,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (retval) return retval; diff --git a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch index 7abfcd16f2..a3b62bcc14 100644 --- a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch +++ b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch @@ -239,7 +239,7 @@ Changes since v1: --- msleep(1); /* -@@ -7726,6 +7774,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7730,6 +7778,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r int retval; u32 reg; @@ -248,7 +248,7 @@ Changes since v1: --- retval = rt2800_probe_rt(rt2x00dev); if (retval) return retval; -@@ -7809,8 +7859,11 @@ void rt2800_get_key_seq(struct ieee80211 +@@ -7813,8 +7863,11 @@ void rt2800_get_key_seq(struct ieee80211 return; offset = MAC_IVEIV_ENTRY(key->hw_key_idx); diff --git a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch index 02b2acfeee..f41a160d3f 100644 --- a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch +++ b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch @@ -41,7 +41,7 @@ Signed-off-by: Gabor Juhos rt2800_clear_beacon_register(rt2x00dev, i); if (rt2x00_is_usb(rt2x00dev)) { -@@ -7827,6 +7828,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7831,6 +7832,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); diff --git a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch index e909272710..5099c64492 100644 --- a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch +++ b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7852,7 +7852,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7856,7 +7856,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); diff --git a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch index 7fe38e0958..a2e701527b 100644 --- a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7822,6 +7822,7 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -7826,6 +7826,7 @@ static int rt2800_probe_rt(struct rt2x00 case RT3390: case RT3572: case RT3593: diff --git a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch index 253a0c0c1e..89bd0acb87 100644 --- a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch @@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos static const struct rf_channel rf_vals_5592_xtal20[] = { /* Channel, N, K, mod, R */ {1, 482, 4, 10, 3}, -@@ -7669,6 +7729,11 @@ static int rt2800_probe_hw_mode(struct r +@@ -7673,6 +7733,11 @@ static int rt2800_probe_hw_mode(struct r spec->channels = rf_vals_3x; break; diff --git a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch index f15c22b30f..b7efc9f31b 100644 --- a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch @@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos case RF5360: case RF5362: case RF5370: -@@ -7848,6 +7849,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -7852,6 +7853,7 @@ static int rt2800_probe_hw_mode(struct r case RF3053: case RF3070: case RF3290: diff --git a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch index 6ce224aba2..220e35fe4c 100644 --- a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8403,7 +8403,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -8407,7 +8407,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); diff --git a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch index 25753af81b..2ffa5a4162 100644 --- a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch +++ b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8416,7 +8416,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -8420,7 +8420,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (retval) return retval; diff --git a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch index 7a183a404b..daa5dc61f9 100644 --- a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch +++ b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch @@ -22,10 +22,10 @@ +#endif /* _RT2X00_PLATFORM_H */ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -38,6 +38,7 @@ - #include +@@ -39,6 +39,7 @@ #include #include + #include +#include #include diff --git a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch index bc056cd735..8ae5da3879 100644 --- a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch +++ b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch @@ -1,6 +1,6 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -329,6 +329,7 @@ RT2X00_LIB_FIRMWARE= +@@ -331,6 +331,7 @@ RT2X00_LIB_FIRMWARE= RT2X00_LIB_CRYPTO= RT2X00_LIB_LEDS= RT2X00_LIB_DEBUGFS= @@ -105,7 +105,7 @@ .drv_init_registers = rt2800mmio_init_registers, --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -697,6 +697,7 @@ enum rt2x00_capability_flags { +@@ -699,6 +699,7 @@ enum rt2x00_capability_flags { REQUIRE_HT_TX_DESC, REQUIRE_PS_AUTOWAKE, REQUIRE_DELAYED_RFKILL, @@ -127,7 +127,7 @@ DECLARE_KFIFO_PTR(txstatus_fifo, u32); --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1335,6 +1335,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de +@@ -1334,6 +1334,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); @@ -138,7 +138,7 @@ /* * Let the driver probe the device to detect the capabilities. */ -@@ -1475,6 +1479,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ +@@ -1477,6 +1481,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ * Free the driver data. */ kfree(rt2x00dev->drv_data); diff --git a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch index d923e05c77..a2e1faf9c3 100644 --- a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch +++ b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch @@ -37,7 +37,7 @@ num_rates += 4; --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -405,6 +405,7 @@ struct hw_mode_spec { +@@ -406,6 +406,7 @@ struct hw_mode_spec { unsigned int supported_bands; #define SUPPORT_BAND_2GHZ 0x00000001 #define SUPPORT_BAND_5GHZ 0x00000002 diff --git a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch index a645ba176e..6704ff835c 100644 --- a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch +++ b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch @@ -31,7 +31,7 @@ { --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -1414,6 +1414,7 @@ static inline void rt2x00debug_dump_fram +@@ -1416,6 +1416,7 @@ static inline void rt2x00debug_dump_fram */ u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif); diff --git a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch index c69d33025d..9f10fe35c3 100644 --- a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch +++ b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch @@ -200,7 +200,7 @@ * EEPROM frequency --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -717,6 +717,8 @@ enum rt2x00_capability_flags { +@@ -719,6 +719,8 @@ enum rt2x00_capability_flags { CAPABILITY_DOUBLE_ANTENNA, CAPABILITY_BT_COEXIST, CAPABILITY_VCO_RECALIBRATION, diff --git a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch index b44fe900d5..860fdc07ed 100644 --- a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch +++ b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch @@ -28,7 +28,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -8272,7 +8293,10 @@ static int rt2800_probe_hw_mode(struct r +@@ -8276,7 +8297,10 @@ static int rt2800_probe_hw_mode(struct r case RF5390: case RF5392: spec->num_channels = 14; @@ -40,7 +40,7 @@ break; case RF3052: -@@ -8456,6 +8480,19 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8460,6 +8484,19 @@ static int rt2800_probe_rt(struct rt2x00 return 0; } @@ -60,7 +60,7 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -@@ -8498,6 +8535,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -8502,6 +8539,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); /* @@ -78,7 +78,7 @@ retval = rt2800_probe_hw_mode(rt2x00dev); --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -400,6 +400,7 @@ static inline struct rt2x00_intf* vif_to +@@ -401,6 +401,7 @@ static inline struct rt2x00_intf* vif_to * @channels: Device/chipset specific channel values (See &struct rf_channel). * @channels_info: Additional information for channels (See &struct channel_info). * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap). @@ -86,7 +86,7 @@ */ struct hw_mode_spec { unsigned int supported_bands; -@@ -416,6 +417,7 @@ struct hw_mode_spec { +@@ -417,6 +418,7 @@ struct hw_mode_spec { const struct channel_info *channels_info; struct ieee80211_sta_ht_cap ht; diff --git a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch index 8e3bd2a362..e7b2a8ca89 100644 --- a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch +++ b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch @@ -8,7 +8,7 @@ #include "rt2x00.h" #include "rt2800lib.h" -@@ -8482,13 +8483,14 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8486,13 +8487,14 @@ static int rt2800_probe_rt(struct rt2x00 int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev) { diff --git a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch index faa5879de6..44bd8a194b 100644 --- a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch +++ b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch @@ -240,7 +240,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8287,6 +8398,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8291,6 +8402,7 @@ static int rt2800_probe_hw_mode(struct r case RF3290: case RF3320: case RF3322: @@ -248,7 +248,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8426,6 +8538,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8430,6 +8542,7 @@ static int rt2800_probe_hw_mode(struct r case RF3070: case RF3290: case RF3853: @@ -256,7 +256,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8466,6 +8579,7 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8470,6 +8583,7 @@ static int rt2800_probe_rt(struct rt2x00 case RT3572: case RT3593: case RT3883: @@ -266,7 +266,7 @@ case RT5592: --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -169,6 +169,7 @@ struct rt2x00_chip { +@@ -170,6 +170,7 @@ struct rt2x00_chip { #define RT3572 0x3572 #define RT3593 0x3593 #define RT3883 0x3883 /* WSOC */ diff --git a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch index 55452b9ebd..dba6033edb 100644 --- a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch +++ b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1284,7 +1284,7 @@ static inline void rt2x00lib_set_if_comb +@@ -1283,7 +1283,7 @@ static inline void rt2x00lib_set_if_comb */ if_limit = &rt2x00dev->if_limits_ap; if_limit->max = rt2x00dev->ops->max_ap_intf; diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch index fd885cc002..02f3053b2f 100644 --- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch +++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c -@@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc +@@ -2122,6 +2122,8 @@ struct wireless_dev *lbs_cfg_alloc(struc goto err_wiphy_new; } diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch index b67a95f948..ad306083da 100644 --- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch +++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c -@@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private +@@ -2212,6 +2212,8 @@ int lbs_cfg_register(struct lbs_private wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); wdev->wiphy->reg_notifier = lbs_reg_notifier; diff --git a/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch b/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch deleted file mode 100644 index 74cd4489f1..0000000000 --- a/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str - case B43_BUS_BCMA: - bcma_cc = &dev->dev->bdev->bus->drv_cc; - -- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0); -- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); -- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4); -- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); -+ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0); -+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); -+ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4); -+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); - break; - #endif - #ifdef CPTCFG_B43_SSB diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch index 06c731fce6..b60ef76a65 100644 --- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch +++ b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch @@ -42,7 +42,7 @@ if (wl->radio_enabled != phy->radio_on) { if (wl->radio_enabled) { -@@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee +@@ -5207,6 +5204,47 @@ static int b43_op_get_survey(struct ieee return 0; } @@ -90,7 +90,7 @@ static const struct ieee80211_ops b43_hw_ops = { .tx = b43_op_tx, .conf_tx = b43_op_conf_tx, -@@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw +@@ -5228,6 +5266,8 @@ static const struct ieee80211_ops b43_hw .sw_scan_complete = b43_op_sw_scan_complete_notifier, .get_survey = b43_op_get_survey, .rfkill_poll = b43_rfkill_poll, @@ -99,7 +99,7 @@ }; /* Hard-reset the chip. Do not call this directly. -@@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4 +@@ -5536,6 +5576,8 @@ static int b43_one_core_attach(struct b4 if (!wldev) goto out; @@ -108,7 +108,7 @@ wldev->use_pio = b43_modparam_pio; wldev->dev = dev; wldev->wl = wl; -@@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init( +@@ -5626,6 +5668,9 @@ static struct b43_wl *b43_wireless_init( hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; diff --git a/package/kernel/mac80211/patches/860-brcmfmac-add-missing-eth_type_trans-call.patch b/package/kernel/mac80211/patches/860-brcmfmac-add-missing-eth_type_trans-call.patch index 7100820710..46227c48dd 100644 --- a/package/kernel/mac80211/patches/860-brcmfmac-add-missing-eth_type_trans-call.patch +++ b/package/kernel/mac80211/patches/860-brcmfmac-add-missing-eth_type_trans-call.patch @@ -14,7 +14,7 @@ Signed-off-by: Rafał Miłecki --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c -@@ -1157,6 +1157,9 @@ brcmf_msgbuf_process_rx_complete(struct brcmf_msgbuf *msgbuf, void *buf) +@@ -1157,6 +1157,9 @@ brcmf_msgbuf_process_rx_complete(struct brcmu_pkt_buf_free_skb(skb); return; } diff --git a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch index ac0f704538..5f69043ada 100644 --- a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch +++ b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch @@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -636,9 +636,37 @@ static struct wireless_dev *brcmf_cfg802 +@@ -650,9 +650,37 @@ static struct wireless_dev *brcmf_cfg802 u32 *flags, struct vif_params *params) { diff --git a/package/kernel/mac80211/patches/863-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/863-brcmfmac-Disable-power-management.patch index 1615202d8e..f971bb7f26 100644 --- a/package/kernel/mac80211/patches/863-brcmfmac-Disable-power-management.patch +++ b/package/kernel/mac80211/patches/863-brcmfmac-Disable-power-management.patch @@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -2651,6 +2651,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip +@@ -2711,6 +2711,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip * preference in cfg struct to apply this to * FW later while initializing the dongle */ diff --git a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch index f2e21ea49f..be210f2d4b 100644 --- a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch +++ b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch @@ -1184,7 +1184,7 @@ break; default: rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", -@@ -8423,6 +9363,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8427,6 +9367,7 @@ static int rt2800_probe_hw_mode(struct r case RF5372: case RF5390: case RF5392: @@ -1192,7 +1192,7 @@ spec->num_channels = 14; if (spec->clk_is_20mhz) spec->channels = rf_vals_xtal20mhz_3x; -@@ -8563,6 +9504,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8567,6 +9508,7 @@ static int rt2800_probe_hw_mode(struct r case RF5372: case RF5390: case RF5392: diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch index 8c6d720a73..6a904ec7ce 100644 --- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch +++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch @@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -1914,6 +1914,16 @@ int ath10k_core_register(struct ath10k * +@@ -2009,6 +2009,16 @@ int ath10k_core_register(struct ath10k * ar->chip_id = chip_id; queue_work(ar->workqueue, &ar->register_work); diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch index 281b4475ad..60b5b1be0c 100644 --- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch +++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -7141,6 +7141,21 @@ struct ath10k_vif *ath10k_get_arvif(stru +@@ -7662,6 +7662,21 @@ struct ath10k_vif *ath10k_get_arvif(stru return arvif_iter.arvif; } @@ -22,7 +22,7 @@ int ath10k_mac_register(struct ath10k *ar) { static const u32 cipher_suites[] = { -@@ -7357,6 +7372,12 @@ int ath10k_mac_register(struct ath10k *a +@@ -7880,6 +7895,12 @@ int ath10k_mac_register(struct ath10k *a ar->hw->wiphy->cipher_suites = cipher_suites; ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile index 1e7dc79369..f66d039245 100644 --- a/package/kernel/mt76/Makefile +++ b/package/kernel/mt76/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=mt76 -PKG_VERSION:=2016-04-27 +PKG_VERSION:=2016-05-14 PKG_RELEASE=1 PKG_LICENSE:=GPLv2 @@ -10,7 +10,7 @@ PKG_LICENSE_FILES:= PKG_SOURCE_URL:=https://github.com/openwrt/mt76 PKG_SOURCE_PROTO:=git PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE_VERSION:=7605d326e6f6dcc3cf0cceea9779f3fd15e1eca7 +PKG_SOURCE_VERSION:=810eef8383cf2669cd4354135fc560ccfe71786c PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz PKG_MAINTAINER:=Felix Fietkau diff --git a/package/kernel/mwlwifi/patches/110-api_sync.patch b/package/kernel/mwlwifi/patches/110-api_sync.patch index ed3e06a1c1..920cb8cd66 100644 --- a/package/kernel/mwlwifi/patches/110-api_sync.patch +++ b/package/kernel/mwlwifi/patches/110-api_sync.patch @@ -1,6 +1,30 @@ --- a/mac80211.c +++ b/mac80211.c -@@ -597,10 +597,13 @@ static int mwl_mac80211_get_survey(struc +@@ -260,12 +260,12 @@ static int mwl_mac80211_config(struct ie + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + int rate = 0; + +- if (conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { ++ if (conf->chandef.chan->band == NL80211_BAND_2GHZ) { + mwl_fwcmd_set_apmode(hw, AP_MODE_2_4GHZ_11AC_MIXED); + mwl_fwcmd_set_linkadapt_cs_mode(hw, + LINK_CS_STATE_CONSERV); + rate = mwl_rates_24[0].hw_value; +- } else if (conf->chandef.chan->band == IEEE80211_BAND_5GHZ) { ++ } else if (conf->chandef.chan->band == NL80211_BAND_5GHZ) { + mwl_fwcmd_set_apmode(hw, AP_MODE_11AC); + mwl_fwcmd_set_linkadapt_cs_mode(hw, + LINK_CS_STATE_AUTO); +@@ -333,7 +333,7 @@ static void mwl_mac80211_bss_info_change + if (idx) + idx--; + +- if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) ++ if (hw->conf.chandef.chan->band == NL80211_BAND_2GHZ) + rate = mwl_rates_24[idx].hw_value; + else + rate = mwl_rates_50[idx].hw_value; +@@ -600,10 +600,13 @@ static int mwl_mac80211_get_survey(struc static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -17,3 +41,227 @@ int rc = 0; struct mwl_priv *priv = hw->priv; struct mwl_ampdu_stream *stream; +--- a/fwcmd.c ++++ b/fwcmd.c +@@ -730,9 +730,9 @@ static int mwl_fwcmd_set_country_code(st + bool enable = false; + + if (b_inf->ie_country_ptr) { +- if (bss_conf->chandef.chan->band == IEEE80211_BAND_2GHZ) ++ if (bss_conf->chandef.chan->band == NL80211_BAND_2GHZ) + a_band = false; +- else if (bss_conf->chandef.chan->band == IEEE80211_BAND_5GHZ) ++ else if (bss_conf->chandef.chan->band == NL80211_BAND_5GHZ) + a_band = true; + else + return -EINVAL; +@@ -1075,9 +1075,9 @@ int mwl_fwcmd_max_tx_power(struct ieee80 + break; + } + +- if (channel->band == IEEE80211_BAND_2GHZ) ++ if (channel->band == NL80211_BAND_2GHZ) + band = FREQ_BAND_2DOT4GHZ; +- else if (channel->band == IEEE80211_BAND_5GHZ) ++ else if (channel->band == NL80211_BAND_5GHZ) + band = FREQ_BAND_5GHZ; + + switch (conf->chandef.width) { +@@ -1161,9 +1161,9 @@ int mwl_fwcmd_tx_power(struct ieee80211_ + break; + } + +- if (channel->band == IEEE80211_BAND_2GHZ) ++ if (channel->band == NL80211_BAND_2GHZ) + band = FREQ_BAND_2DOT4GHZ; +- else if (channel->band == IEEE80211_BAND_5GHZ) ++ else if (channel->band == NL80211_BAND_5GHZ) + band = FREQ_BAND_5GHZ; + + switch (conf->chandef.width) { +@@ -1354,9 +1354,9 @@ int mwl_fwcmd_set_rf_channel(struct ieee + pcmd->action = cpu_to_le16(WL_SET); + pcmd->curr_chnl = channel->hw_value; + +- if (channel->band == IEEE80211_BAND_2GHZ) { ++ if (channel->band == NL80211_BAND_2GHZ) { + freq_band = FREQ_BAND_2DOT4GHZ; +- } else if (channel->band == IEEE80211_BAND_5GHZ) { ++ } else if (channel->band == NL80211_BAND_5GHZ) { + freq_band = FREQ_BAND_5GHZ; + } else { + mutex_unlock(&priv->fwcmd_mutex); +@@ -1923,10 +1923,10 @@ int mwl_fwcmd_set_new_stn_add(struct iee + } + ether_addr_copy(pcmd->mac_addr, sta->addr); + +- if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) +- rates = sta->supp_rates[IEEE80211_BAND_2GHZ]; ++ if (hw->conf.chandef.chan->band == NL80211_BAND_2GHZ) ++ rates = sta->supp_rates[NL80211_BAND_2GHZ]; + else +- rates = sta->supp_rates[IEEE80211_BAND_5GHZ] << 5; ++ rates = sta->supp_rates[NL80211_BAND_5GHZ] << 5; + pcmd->peer_info.legacy_rate_bitmap = cpu_to_le32(rates); + + if (sta->ht_cap.ht_supported) { +@@ -2097,9 +2097,9 @@ int mwl_fwcmd_set_switch_channel(struct + if (priv->csa_active) + return 0; + +- if (channel->band == IEEE80211_BAND_2GHZ) ++ if (channel->band == NL80211_BAND_2GHZ) + freq_band = FREQ_BAND_2DOT4GHZ; +- else if (channel->band == IEEE80211_BAND_5GHZ) ++ else if (channel->band == NL80211_BAND_5GHZ) + freq_band = FREQ_BAND_5GHZ; + else + return -EINVAL; +--- a/main.c ++++ b/main.c +@@ -63,20 +63,20 @@ static struct mwl_chip_info mwl_chip_tbl + }; + + static const struct ieee80211_channel mwl_channels_24[] = { +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2412, .hw_value = 1, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2417, .hw_value = 2, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2422, .hw_value = 3, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2427, .hw_value = 4, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2432, .hw_value = 5, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2437, .hw_value = 6, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2442, .hw_value = 7, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2447, .hw_value = 8, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2452, .hw_value = 9, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2457, .hw_value = 10, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2462, .hw_value = 11, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2467, .hw_value = 12, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2472, .hw_value = 13, }, +- { .band = IEEE80211_BAND_2GHZ, .center_freq = 2484, .hw_value = 14, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2412, .hw_value = 1, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2417, .hw_value = 2, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2422, .hw_value = 3, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2427, .hw_value = 4, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2432, .hw_value = 5, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2437, .hw_value = 6, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2442, .hw_value = 7, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2447, .hw_value = 8, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2452, .hw_value = 9, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2457, .hw_value = 10, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2462, .hw_value = 11, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2467, .hw_value = 12, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2472, .hw_value = 13, }, ++ { .band = NL80211_BAND_2GHZ, .center_freq = 2484, .hw_value = 14, }, + }; + + static const struct ieee80211_rate mwl_rates_24[] = { +@@ -96,30 +96,30 @@ static const struct ieee80211_rate mwl_r + }; + + static const struct ieee80211_channel mwl_channels_50[] = { +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5180, .hw_value = 36, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5200, .hw_value = 40, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5220, .hw_value = 44, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5240, .hw_value = 48, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5260, .hw_value = 52, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5280, .hw_value = 56, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5300, .hw_value = 60, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5320, .hw_value = 64, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5500, .hw_value = 100, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5520, .hw_value = 104, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5540, .hw_value = 108, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5560, .hw_value = 112, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5580, .hw_value = 116, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5600, .hw_value = 120, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5620, .hw_value = 124, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5640, .hw_value = 128, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5660, .hw_value = 132, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5680, .hw_value = 136, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5700, .hw_value = 140, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5720, .hw_value = 144, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5745, .hw_value = 149, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5765, .hw_value = 153, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5785, .hw_value = 157, }, +- { .band = IEEE80211_BAND_5GHZ, .center_freq = 5805, .hw_value = 161, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5180, .hw_value = 36, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5200, .hw_value = 40, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5220, .hw_value = 44, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5240, .hw_value = 48, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5260, .hw_value = 52, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5280, .hw_value = 56, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5300, .hw_value = 60, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5320, .hw_value = 64, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5500, .hw_value = 100, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5520, .hw_value = 104, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5540, .hw_value = 108, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5560, .hw_value = 112, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5580, .hw_value = 116, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5600, .hw_value = 120, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5620, .hw_value = 124, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5640, .hw_value = 128, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5660, .hw_value = 132, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5680, .hw_value = 136, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5700, .hw_value = 140, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5720, .hw_value = 144, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5745, .hw_value = 149, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5765, .hw_value = 153, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5785, .hw_value = 157, }, ++ { .band = NL80211_BAND_5GHZ, .center_freq = 5805, .hw_value = 161, }, + }; + + static const struct ieee80211_rate mwl_rates_50[] = { +@@ -478,7 +478,7 @@ static void mwl_set_caps(struct mwl_priv + BUILD_BUG_ON(sizeof(priv->rates_24) != sizeof(mwl_rates_24)); + memcpy(priv->rates_24, mwl_rates_24, sizeof(mwl_rates_24)); + +- priv->band_24.band = IEEE80211_BAND_2GHZ; ++ priv->band_24.band = NL80211_BAND_2GHZ; + priv->band_24.channels = priv->channels_24; + priv->band_24.n_channels = ARRAY_SIZE(mwl_channels_24); + priv->band_24.bitrates = priv->rates_24; +@@ -487,7 +487,7 @@ static void mwl_set_caps(struct mwl_priv + mwl_set_ht_caps(priv, &priv->band_24); + mwl_set_vht_caps(priv, &priv->band_24); + +- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band_24; ++ hw->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band_24; + } + + /* set up band information for 5G */ +@@ -500,7 +500,7 @@ static void mwl_set_caps(struct mwl_priv + BUILD_BUG_ON(sizeof(priv->rates_50) != sizeof(mwl_rates_50)); + memcpy(priv->rates_50, mwl_rates_50, sizeof(mwl_rates_50)); + +- priv->band_50.band = IEEE80211_BAND_5GHZ; ++ priv->band_50.band = NL80211_BAND_5GHZ; + priv->band_50.channels = priv->channels_50; + priv->band_50.n_channels = ARRAY_SIZE(mwl_channels_50); + priv->band_50.bitrates = priv->rates_50; +@@ -509,7 +509,7 @@ static void mwl_set_caps(struct mwl_priv + mwl_set_ht_caps(priv, &priv->band_50); + mwl_set_vht_caps(priv, &priv->band_50); + +- hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &priv->band_50; ++ hw->wiphy->bands[NL80211_BAND_5GHZ] = &priv->band_50; + } + } + +--- a/rx.c ++++ b/rx.c +@@ -243,7 +243,7 @@ static inline void mwl_rx_prepare_status + status->rate_idx = rt; + + if (pdesc->channel > BAND_24_CHANNEL_NUM) { +- status->band = IEEE80211_BAND_5GHZ; ++ status->band = NL80211_BAND_5GHZ; + if ((!(status->flag & RX_FLAG_HT)) && + (!(status->flag & RX_FLAG_VHT))) { + status->rate_idx -= 5; +@@ -251,7 +251,7 @@ static inline void mwl_rx_prepare_status + status->rate_idx = BAND_50_RATE_NUM - 1; + } + } else { +- status->band = IEEE80211_BAND_2GHZ; ++ status->band = NL80211_BAND_2GHZ; + if ((!(status->flag & RX_FLAG_HT)) && + (!(status->flag & RX_FLAG_VHT))) { + if (status->rate_idx >= BAND_24_RATE_NUM) diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 7de225859b..e5ea8f7c8a 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -8,7 +8,17 @@ * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above -@@ -328,7 +329,15 @@ +@@ -321,14 +322,24 @@ + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the +- * probe requests at CCK rate or not. ++ * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to ++ * specify a BSSID to scan for; if not included, the wildcard BSSID will ++ * be used. + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, * partial scan results may be available * * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain @@ -25,7 +35,82 @@ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) * are passed, they are used in the probe requests. For * broadcast, a broadcast SSID must be passed (ie. an empty -@@ -1761,6 +1770,22 @@ enum nl80211_commands { +@@ -418,7 +429,11 @@ + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, +- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). ++ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The ++ * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the ++ * request is for the initial association to an ESS (that attribute not ++ * included) or for reassociation within the ESS (that attribute is ++ * included). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication +@@ -468,6 +483,9 @@ + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). ++ * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within ++ * the ESS in case the device is already associated and an association with ++ * a different BSS is desired. + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration +@@ -811,6 +829,10 @@ + * as an event to indicate changes for devices with wiphy-specific regdom + * management. + * ++ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is ++ * not running. The driver indicates the status of the scan through ++ * cfg80211_scan_done(). ++ * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +@@ -997,6 +1019,8 @@ enum nl80211_commands { + + NL80211_CMD_WIPHY_REG_CHANGE, + ++ NL80211_CMD_ABORT_SCAN, ++ + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ +@@ -1270,8 +1294,11 @@ enum nl80211_commands { + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * +- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE +- * commands to specify using a reassociate frame ++ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT ++ * commands to specify a request to reassociate within an ESS, i.e., to use ++ * Reassociate Request frame (with the value of this attribute in the ++ * Current AP address field) instead of Association Request frame which is ++ * used for the initial association to an ESS. + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes +@@ -1712,6 +1739,8 @@ enum nl80211_commands { + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, ++ * Or, if global RRM is supported, see: ++ * %NL80211_EXT_FEATURE_RRM + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. +@@ -1755,12 +1784,44 @@ enum nl80211_commands { + * over all channels. + * + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a +- * scheduled scan (or a WoWLAN net-detect scan) is started, u32 +- * in seconds. ++ * scheduled scan is started. Or the delay before a WoWLAN ++ * net-detect scan is started, counting from the moment the ++ * system is suspended. This value is a u32, in seconds. + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * is operating in an indoor environment. * @@ -41,6 +126,21 @@ + * thus it must not specify the number of iterations, only the interval + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. ++ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate ++ * in a PBSS. Specified in %NL80211_CMD_CONNECT to request ++ * connecting to a PCP, and in %NL80211_CMD_START_AP to start ++ * a PCP instead of AP. Relevant for DMG networks only. ++ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the ++ * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains ++ * attributes according &enum nl80211_bss_select_attr to indicate what ++ * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT ++ * it contains the behaviour-specific attribute containing the parameters for ++ * BSS selection to be done by driver and/or firmware. ++ * ++ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported ++ * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status ++ * ++ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. @@ -48,7 +148,7 @@ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2130,6 +2155,13 @@ enum nl80211_attrs { +@@ -2130,6 +2191,21 @@ enum nl80211_attrs { NL80211_ATTR_REG_INDOOR, @@ -57,30 +157,147 @@ + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, + ++ NL80211_ATTR_PBSS, ++ ++ NL80211_ATTR_BSS_SELECT, ++ ++ NL80211_ATTR_STA_SUPPORT_P2P_PS, ++ ++ NL80211_ATTR_PAD, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3364,6 +3396,9 @@ enum nl80211_bss_scan_width { +@@ -2273,6 +2349,20 @@ enum nl80211_sta_flags { + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 + }; + ++/** ++ * enum nl80211_sta_p2p_ps_status - station support of P2P PS ++ * ++ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism ++ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism ++ * @NUM_NL80211_P2P_PS_STATUS: number of values ++ */ ++enum nl80211_sta_p2p_ps_status { ++ NL80211_P2P_PS_UNSUPPORTED = 0, ++ NL80211_P2P_PS_SUPPORTED, ++ ++ NUM_NL80211_P2P_PS_STATUS, ++}; ++ + #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER + + /** +@@ -2430,6 +2520,9 @@ enum nl80211_sta_bss_param { + * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; + * each one of those is again nested with &enum nl80211_tid_stats + * attributes carrying the actual values. ++ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames ++ * received from the station (u64, usec) ++ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +@@ -2466,6 +2559,8 @@ enum nl80211_sta_info { + NL80211_STA_INFO_BEACON_RX, + NL80211_STA_INFO_BEACON_SIGNAL_AVG, + NL80211_STA_INFO_TID_STATS, ++ NL80211_STA_INFO_RX_DURATION, ++ NL80211_STA_INFO_PAD, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -2482,6 +2577,7 @@ enum nl80211_sta_info { + * transmitted MSDUs (not counting the first attempt; u64) + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) ++ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +@@ -2491,6 +2587,7 @@ enum nl80211_tid_stats { + NL80211_TID_STATS_TX_MSDU, + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, ++ NL80211_TID_STATS_PAD, + + /* keep last */ + NUM_NL80211_TID_STATS, +@@ -2927,6 +3024,7 @@ enum nl80211_user_reg_hint_type { + * transmitting data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan + * (on this channel or globally) ++ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use +@@ -2942,6 +3040,7 @@ enum nl80211_survey_info { + NL80211_SURVEY_INFO_TIME_RX, + NL80211_SURVEY_INFO_TIME_TX, + NL80211_SURVEY_INFO_TIME_SCAN, ++ NL80211_SURVEY_INFO_PAD, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, +@@ -3364,6 +3463,10 @@ enum nl80211_bss_scan_width { * (not present if no beacon frame has been received yet) * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) + * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry + * was last updated by a received frame. The value is expected to be + * accurate to about 10ms. (u64, nanoseconds) ++ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ -@@ -3383,6 +3418,7 @@ enum nl80211_bss { +@@ -3383,6 +3486,8 @@ enum nl80211_bss { NL80211_BSS_CHAN_WIDTH, NL80211_BSS_BEACON_TSF, NL80211_BSS_PRESP_DATA, + NL80211_BSS_LAST_SEEN_BOOTTIME, ++ NL80211_BSS_PAD, /* keep last */ __NL80211_BSS_AFTER_LAST, -@@ -4589,4 +4625,28 @@ enum nl80211_tdls_peer_capability { +@@ -3568,11 +3673,15 @@ enum nl80211_txrate_gi { + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) ++ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace ++ * since newer kernel versions may support more bands + */ + enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, ++ ++ NUM_NL80211_BANDS, + }; + + /** +@@ -4358,12 +4467,18 @@ enum nl80211_feature_flags { + /** + * enum nl80211_ext_feature_index - bit index of extended features. + * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. ++ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can ++ * can request to use RRM (see %NL80211_ATTR_USE_RRM) with ++ * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set ++ * the ASSOC_REQ_USE_RRM flag in the association request even if ++ * NL80211_FEATURE_QUIET is not advertized. + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ + enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_VHT_IBSS, ++ NL80211_EXT_FEATURE_RRM, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, +@@ -4589,4 +4704,72 @@ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_WMM = 1<<2, }; @@ -107,5 +324,49 @@ + NL80211_SCHED_SCAN_PLAN_MAX = + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; ++ ++/** ++ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. ++ * ++ * @band: band of BSS that must match for RSSI value adjustment. ++ * @delta: value used to adjust the RSSI value of matching BSS. ++ */ ++struct nl80211_bss_select_rssi_adjust { ++ __u8 band; ++ __s8 delta; ++} __attribute__((packed)); ++ ++/** ++ * enum nl80211_bss_select_attr - attributes for bss selection. ++ * ++ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. ++ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection ++ * is requested. ++ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS ++ * selection should be done such that the specified band is preferred. ++ * When there are multiple BSS-es in the preferred band, the driver ++ * shall use RSSI-based BSS selection as a second step. The value of ++ * this attribute is according to &enum nl80211_band (u32). ++ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for ++ * BSS-es in the specified band is to be adjusted before doing ++ * RSSI-based BSS selection. The attribute value is a packed structure ++ * value as specified by &struct nl80211_bss_select_rssi_adjust. ++ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. ++ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. ++ * ++ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT ++ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour ++ * which the driver shall use. ++ */ ++enum nl80211_bss_select_attr { ++ __NL80211_BSS_SELECT_ATTR_INVALID, ++ NL80211_BSS_SELECT_ATTR_RSSI, ++ NL80211_BSS_SELECT_ATTR_BAND_PREF, ++ NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, ++ ++ /* keep last */ ++ __NL80211_BSS_SELECT_ATTR_AFTER_LAST, ++ NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 ++}; + #endif /* __LINUX_NL80211_H */ diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h index e543a64060..2c19f3b494 100644 --- a/target/linux/generic/files/include/linux/ath9k_platform.h +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -31,6 +31,10 @@ struct ath9k_platform_data { u32 gpio_mask; u32 gpio_val; + u32 bt_active_pin; + u32 bt_priority_pin; + u32 wlan_active_pin; + bool endian_check; bool is_clk_25mhz; bool tx_gain_buffalo;