From: John Crispin Date: Sun, 30 Mar 2014 09:15:16 +0000 (+0000) Subject: kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=deba38f2a7ee7daea08905b6d45412c1469d7c84;p=openwrt%2Fstaging%2Fdangole.git kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx If the CPU port is not forced up, the link, at least on this board, is lost after changes are applied. This makes sure that the link is restored. Regression tests should confirm it doesn't break other boards. Signed-off-by: Antonios Vamporakis SVN-Revision: 40305 --- diff --git a/target/linux/generic/files/drivers/net/phy/rtl8306.c b/target/linux/generic/files/drivers/net/phy/rtl8306.c index 33dbf969c1..a5886b60ee 100644 --- a/target/linux/generic/files/drivers/net/phy/rtl8306.c +++ b/target/linux/generic/files/drivers/net/phy/rtl8306.c @@ -126,6 +126,7 @@ enum rtl_regidx { RTL_REG_EN_TAG_CLR, RTL_REG_EN_TAG_IN, RTL_REG_TRAP_CPU, + RTL_REG_CPU_LINKUP, RTL_REG_TRUNK_PORTSEL, RTL_REG_EN_TRUNK, RTL_REG_RESET, @@ -194,6 +195,7 @@ static const struct rtl_reg rtl_regs[] = { [RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 }, [RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 }, + [RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 }, [RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 }, [RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 }, @@ -458,6 +460,8 @@ rtl_hw_apply(struct switch_dev *dev) rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel); rtl_phy_restore(dev, 5, &port5); + rtl_set(dev, RTL_REG_CPU_LINKUP, 1); + return 0; }