From: Thierry Reding Date: Fri, 26 Jul 2019 10:27:41 +0000 (+0200) Subject: net: stmmac: Do not request stmmaceth clock X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ddfbee9e3204a0158774bbe9df0f555573e81f43;p=openwrt%2Fstaging%2Fblogic.git net: stmmac: Do not request stmmaceth clock The stmmaceth clock is specified by the slave_bus and apb_pclk clocks in the device tree bindings for snps,dwc-qos-ethernet-4.10 compatible nodes of this IP. The subdrivers for these bindings will be requesting the stmmac clock correctly at a later point, so there is no need to request it here and cause an error message to be printed to the kernel log. Signed-off-by: Thierry Reding Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 333b09564b88..7ad2bb90ceb1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -521,13 +521,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) } /* clock setup */ - plat->stmmac_clk = devm_clk_get(&pdev->dev, - STMMAC_RESOURCE_NAME); - if (IS_ERR(plat->stmmac_clk)) { - dev_warn(&pdev->dev, "Cannot get CSR clock\n"); - plat->stmmac_clk = NULL; + if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { + plat->stmmac_clk = devm_clk_get(&pdev->dev, + STMMAC_RESOURCE_NAME); + if (IS_ERR(plat->stmmac_clk)) { + dev_warn(&pdev->dev, "Cannot get CSR clock\n"); + plat->stmmac_clk = NULL; + } + clk_prepare_enable(plat->stmmac_clk); } - clk_prepare_enable(plat->stmmac_clk); plat->pclk = devm_clk_get(&pdev->dev, "pclk"); if (IS_ERR(plat->pclk)) {